On Tue, Feb 07, 2012 at 05:23:13PM +0000, Premi, Sanjeev wrote: > Yesterday, i spent quite sometime dealing with 'MLO', unable to find > 'barebox.bin'. The failure was always: > > barebox 2012.01.0ABC-00248-g9119228-dirty (Feb 7 2012 - 16:39:43) > > Board: Texas Instrument's OMAP3EVM > Malloc space: 0x87bfff10 -> 0x87ffff0f (size 4 MB) > Stack space : 0x4020f000 -> 0x4020fc00 (size 3 kB) > booting from MMC1 > mounting sd card failed with -22 > booting failed > > Since, I was working mostly off the windows machine, i didn't > realize that SD card had only one partition and mount would > fail as we explicitly mount "disk0.0" in omap_xload_boot_mmc(). You mean that it only has one partition without a partition table? > > Unfortunately, trying to mount "disk0" didn't help and I got > same error. Haven't debugged this further though. > > Also, would it make sense to try mounting "disk0.0" and "disk0" > before returning failure? Yes, seems to make sense. The only contra I can imagine is that for booting a kernel and rootfs the user probably needs a partitioned SD card anyway. > > I am anyways planning to submit a patch changing the message: > mounting sd card failed with -22 > to > Unable to mount disk0.0 (-22) Sounds good. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
