On Thu, Jan 26, 2012 at 11:32:32AM +1100, Marc Reilly wrote: > Hi, > > > > If I am booting from the SD card how do I get it onto the card > > > > > > dd if=barebox.bin of=/dev/sdc bs=512 seek=2 ?? > > > > cat barebox.bin > /dev/sdc > > > > Of course this means that you will overwrite the partition table of the > > SD card. I'm still loooking for a good way to make this behaviour more > > convenient. > > (For iMX35 at least): The barebox image doesn't contain anything in the first > 1K apart from an unconditional branch to the reset vector (at 2K offset). This > branch is not necessary for internal booting, because the app entry point is > specified in the flash header information. > > sudo dd if=barebox.bin of=/dev/sde bs=512 seek=2 skip=2 If you need the first bytes, this should work: dd if=barebox.bin of=/dev/sde bs=446 count=1 dd if=barebox.bin of=/dev/sde bs=512 seek=1 skip=1 Michael -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
