> -----Original Message----- > From: Premi, Sanjeev > Sent: Tuesday, February 07, 2012 9:47 PM > To: barebox@xxxxxxxxxxxxxxxxxxx > Cc: Premi, Sanjeev > Subject: [PATCH 0/2] omap3evm: Enable Linux boot > > These patches are necessary enable Linux boot from > barebox.bin. > > Both patches apply against the 'next' branch at: > > Linux still doesn't boot successfully, and changes > are necessary in the defconfig and default env. > Will submit the patches once I have done some more > debug. > > Will share the failure log in reponse to this patch > (just to prevent clutter in this description). > > Sanjeev Premi (2): > omap3evm: Remove inclusion of non-existent header > omap3evm: Setup ATAGs for Linux boot > > arch/arm/boards/omap3evm/board.c | 5 ++++- > 1 files changed, 4 insertions(+), 1 deletions(-) > My local init script uses this command to boot Linux: bootm -c -v /mnt/uImage As noted in the original description, Linux doesn't boot successfully. Debugger indicates an exception - but need to investigate further. Here is the log: barebox 2012.01.0-00248-g9119228-dirty (Feb 7 2012 - 21:08:10) Board: Texas Instrument's OMAP3EVM Malloc space: 0x87bfff10 -> 0x87ffff0f (size 4 MB) Stack space : 0x4020f000 -> 0x4020fc00 (size 3 kB) booting from MMC1 barebox 2012.01.0-00248-g9119228-dirty (Feb 7 2012 - 21:09:16) Board: Texas Instrument's OMAP3EVM Malloc space: 0x80c00000 -> 0x80ffffff (size 4 MB) Stack space : 0x80bf8000 -> 0x80c00000 (size 32 kB) Open /dev/env0 No such file or directory no valid environment found on /dev/env0. Using default environment running /env/bin/init... :: Press any key to stop autoboot: 0 :: :: Booting from disk ... :: Image Name: Linux-3.3.0-rc1-11551-g1c6ece3 Created: 2012-02-07 16:08:10 UTC OS: Linux Architecture: ARM Type: Kernel Image Compression: uncompressed Data Size: 3382624 Bytes = 3.2 MB Load Address: 80008000 Entry Point: 80008000 Loading OS U-Boot uImage '/mnt/uImage' OS image is at 0x80008000-0x80341d5f Passing control to ARM Linux uImage handler Starting kernel at 0x80008000... commandline: console=tty02,115200n8 mem=256M earlyprintk=serial,ttyO2,115200 noinitrd root=/dev/mmcblk0p2 rw rootfstype=ext3 ip=dhcp arch_number: 1535 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
