FIXME: part of or no data is written. File copy ends
with message: "atmel_mci@atmel_mci0: command/data timeout"
Signed-off-by: Asen Chavdarov Dimov <dimov@xxxxxxxxxx>
---
since v1:
add_device_mci renamed to pm9g45_add_device_mci
---
arch/arm/boards/pm9g45/init.c | 16 ++++++++++++++++
arch/arm/configs/pm9g45_defconfig | 34 +++++++++++++++++++++++++++++++---
2 files changed, 47 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boards/pm9g45/init.c b/arch/arm/boards/pm9g45/init.c
index 92d010f..79a0128 100644
--- a/arch/arm/boards/pm9g45/init.c
+++ b/arch/arm/boards/pm9g45/init.c
@@ -77,6 +77,21 @@ static void pm_add_device_nand(void)
at91_add_device_nand(&nand_pdata);
}
+#if defined(CONFIG_MCI_ATMEL)
+static struct atmel_mci_platform_data __initdata mci_data = {
+ .bus_width = 4,
+ .wp_pin = 0,
+ .detect_pin = AT91_PIN_PD6,
+};
+
+static void pm9g45_add_device_mci(void)
+{
+ at91_add_device_mci(0, &mci_data);
+}
+#else
+static void pm9g45_add_device_mci(void) {}
+#endif
+
static struct at91_ether_platform_data macb_pdata = {
.flags = AT91SAM_ETHER_RMII,
.phy_addr = 0,
@@ -105,6 +120,7 @@ static int pm9g45_devices_init(void)
{
pm_add_device_nand();
+ pm9g45_add_device_mci();
pm9g45_phy_init();
at91_add_device_eth(&macb_pdata);
diff --git a/arch/arm/configs/pm9g45_defconfig b/arch/arm/configs/pm9g45_defconfig
index f05d4de..5132ea4 100644
--- a/arch/arm/configs/pm9g45_defconfig
+++ b/arch/arm/configs/pm9g45_defconfig
@@ -69,6 +69,8 @@ CONFIG_HAS_MODULES=y
CONFIG_CMD_MEMORY=y
CONFIG_ENV_HANDLING=y
CONFIG_GENERIC_GPIO=y
+CONFIG_BLOCK=y
+CONFIG_BLOCK_WRITE=y
CONFIG_FILETYPE=y
#
@@ -290,11 +292,35 @@ CONFIG_NAND_ATMEL=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_UBI=y
-# CONFIG_DISK is not set
+CONFIG_DISK=y
+CONFIG_DISK_WRITE=y
+
+#
+# drive types
+#
+# CONFIG_DISK_ATA is not set
+
+#
+# interface types
+#
+# CONFIG_DISK_INTF_PLATFORM_IDE is not set
# CONFIG_USB is not set
# CONFIG_USB_GADGET is not set
# CONFIG_VIDEO is not set
-# CONFIG_MCI is not set
+CONFIG_MCI=y
+
+#
+# --- Feature list ---
+#
+# CONFIG_MCI_STARTUP is not set
+CONFIG_MCI_INFO=y
+CONFIG_MCI_WRITE=y
+
+#
+# --- MCI host drivers ---
+#
+CONFIG_MCI_ATMEL=y
+# CONFIG_MCI_SPI is not set
CONFIG_CLKDEV_LOOKUP=y
#
@@ -319,7 +345,9 @@ CONFIG_EEPROM_AT25=y
# CONFIG_FS_CRAMFS is not set
CONFIG_FS_RAMFS=y
CONFIG_FS_DEVFS=y
-# CONFIG_FS_FAT is not set
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
+CONFIG_FS_FAT_LFN=y
CONFIG_PARTITION_NEED_MTD=y
#
--
1.7.4.4
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
