U-Boot V2 Development (Barebox)
[Prev Page][Next Page]
- [PATCH 1/2] introduce barebox_bare_init_size to known the bare_init size and check it,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH v3 0/2] ns16550-related patches,
Antony Pavlov
- [PATCH v2] ns16550: support for UART with broken FIFO, Antony Pavlov
- [PATCH] USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor, Sascha Hauer
- [PATCH 1/2 v3] add config to check if the size of barebox exceed the target size,
Jean-Christophe PLAGNIOL-VILLARD
- [RFC] ns16550: support for UART with broken FIFO,
Antony Pavlov
- [PATCH] ARM pca-a-l1: fix board_init, Sascha Hauer
- [PATCH 1/2 v2] add config to check if the size of barebox exceed the target size,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/1] atmel_nand: disable hardware ecc if not enable, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH] omap3 towards thumb2 support,
Sascha Hauer
- [PATCH 01/10] ARM omap3: remove OMAP3_COPY_CLOCK_SRAM, Sascha Hauer
- [PATCH 06/10] ARM omap3: remove vector setup from lowlevel code, Sascha Hauer
- [PATCH 04/10] ARM omap3: call a_init from board code, Sascha Hauer
- [PATCH 02/10] ARM omap3 beagle xload: Move stack to SRAM, Sascha Hauer
- [PATCH 09/10] mtd omap nand: fix driver without CONFIG_PARAMETER, Sascha Hauer
- [PATCH 03/10] ARM omap3: move board_init to pure_initcall, Sascha Hauer
- [PATCH 07/10] ARM omap3: reimplement setup_auxcr in pure asm, Sascha Hauer
- [PATCH 10/10] ARM omap3: make omap3_core.S thumb safe, Sascha Hauer
- [PATCH 05/10] ARM omap3 clock: move pll tables to C code, Sascha Hauer
- [PATCH 08/10] ARM cache-armv7: Add additional ISB, Sascha Hauer
- RE: [PATCH] omap3 towards thumb2 support, Premi, Sanjeev
- Barebox IRC channel,
Franck JULLIEN
- [PATCH 0/5] Calao dfu upload kernel or uImage and boot it,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/2] add CONFIG_BAREBOX_MAX_SIZE to check if the size of barebox exceed the target size,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/1] usb: fix driver name,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/4] omap3: move platform lowlevel init to mach-omap,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/1] CMD_UNCOMPRESS: select UNCOMPRESS, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/1] atmel/mci: fix slot_b support, Jean-Christophe PLAGNIOL-VILLARD
- [RFC] fix gpmc_nand_probe without param support, Jan Weitzel
- imx35 NFC and jffs2,
guenter . gebhardt
- [PATCH 1/1] devfs-code: fix warning, Jean-Christophe PLAGNIOL-VILLARD
- [RFC 1/2] ARM omap: Add null console,
Sanjeev Premi
- how to boot from external RAM,
G Rajender
- [PATCH 5/5] ARM omap: Set IFT target as MLO, Sanjeev Premi
- [PATCH 4/5] ARM omap3evm: Enable HSMMC device, Sanjeev Premi
- [PATCH 3/5] ARM omap3evm: Allow building first stage bootloader, Sanjeev Premi
- [PATCH 2/5] ARM omap3beagle: Fix incorrect base addresses, Sanjeev Premi
- [PATCH 1/5] ARM omap: Use updated config option, Sanjeev Premi
- [PATCH 0/5] ARM omap: Some fixes and enhancements,
Sanjeev Premi
- [PATCH 0/6] code size reduction for xloader,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/1] at91sam9/lowlevel_init: allow to select the smc chipselect, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/1] environment: export_/getenv_ull as inline ifndef CONFIG_ENVIRONMENT_VARIABLES, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/1] dummy_malloc: add calloc support, Jean-Christophe PLAGNIOL-VILLARD
- [RESEND PATCH] atmel_nand: add on_flash_btt option to enable bbt option,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/1] at91: add Calao TNY-A9260/TNY-A9263/TNY-A9G20,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH] fs: fat: gen_numname() is only need with FS_FAT_WRITE,
Wolfram Sang
- [PATCH 1/2] at91: add spi device ressources,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/2] at91sam9260/9g20ek: add dfu and usb serial support,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/1] mci_spi: specify hw_dev,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/2] serial: drop non used at91rm9200 driver,
Jean-Christophe PLAGNIOL-VILLARD
- compile patches,
Sascha Hauer
- [PATCH 1/2] at91rm9200: fix lowlovel init PIOC base,
Jean-Christophe PLAGNIOL-VILLARD
- v2012.01.0, Sascha Hauer
- [PATCH] video imx: specify num_modes in platform_data, Sascha Hauer
- [PATCH] u_serial: add setbrg to be able to use loadb & co,
Eric Bénard
- [PATCH v4 1/5] fsl_udc: update and fix,
Eric Bénard
- [PATCH] Fix compile failures due to arch move,
Juergen Beisert
- [PATCH 1/1] calao/usb-926x: update usb gadget support,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/4] fsl_udc: update and fix,
Eric Bénard
- [PATCH] boards: mx23evk: add MMC support, Wolfram Sang
- [PATH] Some fixes after global changes,
Juergen Beisert
- [PATCH 1/6] defaultenv: source the init_board so we can keep exported env,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 2/2] defconfig update, Sascha Hauer
- [PATCH 1/2] MAKEALL: explicitly use bash, Sascha Hauer
- patches for compiler warnings,
Sascha Hauer
- tlsf patches,
Sascha Hauer
- [PATCH v2] Prepare to add more Samsung S3C CPUs to barebox,
Juergen Beisert
- [PATCH 11/14] MACH SAMSUNG/S3C: Prepare watchdog unit to be shared in the S3C family, Juergen Beisert
- [PATCH 02/14] MACH SAMSUNG/S3C: Do not compile S3C24xx's GPIO support unconditionally, Juergen Beisert
- [PATCH 10/14] MACH SAMSUNG/S3C: Re-work the S3C family timer driver, Juergen Beisert
- [PATCH 06/14] MACH SAMSUNG/S3C: Reflect the CPU name the LCD driver is for, Juergen Beisert
- [PATCH 05/14] MACH SAMSUNG/S3C: Parts of the SDHC driver can be shared in the S3C CPU family, Juergen Beisert
- [PATCH 08/14] MACH SAMSUNG/S3C: Separate the clocksource for the S3C family, Juergen Beisert
- [PATCH 04/14] MACH SAMSUNG/S3C: Use the correct CPU family name to reflect NAND driver's usage, Juergen Beisert
- [PATCH 01/14] MACH SAMSUNG: Rename the whole mach to add more CPUs in future, Juergen Beisert
- [PATCH 09/14] MACH SAMSUNG/S3C: Rename register macros to reflect the MACH they are valid for, Juergen Beisert
- [PATCH 03/14] MACH SAMSUNG/S3C: Make it more generic for future updates, Juergen Beisert
- [PATCH 12/14] MACH SAMSUNG/S3C: Unify the UART driver for the S3C family of CPUs, Juergen Beisert
- [PATCH 07/14] MACH SAMSUNG/S3C: Separate S3C24XX clock management, Juergen Beisert
- [PATCH 13/14] MACH SAMSUNG/S3C: Re-work the memory detection and handling, Juergen Beisert
- [PATCH 14/14] MACH SAMSUNG/S3C: Re-work the GPIO handling for S3C24xx CPUs, Juergen Beisert
- [PATCH V2] mxs: add support for mx28-evk, Wolfram Sang
- [PATCH] ARM: mark 'lr' as clobbered by inline assembler, Enrico Scholz
- [PATCH] ARM: set SCTRL[A] only when architecture does not support unaligned access, Enrico Scholz
- AT91: Pull,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 04/12] atmel_nand: drop dead code, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 05/12] at91: add sram memory devices, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 02/12] ARM: import memcpy_from/toio and memset_io from linux, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 06/12] at91sam9263ek: add nor partition, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 01/12] atmel: reference boards and Caloa boards bbt option enabled, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 03/12] mtd: atmel_nand: optimize read/write buffer functions, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 09/12] usb-a926x: add led support, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 11/12] at91_udc: update vbus param only if updated, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 10/12] usb-a926x: add dfu support, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 12/12] usb-a926x: update defconfig, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 08/12] at91/gpio: simplify resources, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 07/12] at91sam9x: switch lowlevel init to c, Jean-Christophe PLAGNIOL-VILLARD
- [RESEND PATCH 1/2] scripts/Makefile.lib: update compress cmd support,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH] mtd/core.c: fix MTDPGALG,
Jean-Christophe PLAGNIOL-VILLARD
- Adding New comand,
G Rajender
- [PATCH 0/2] PPC multiple architecture preparation,
Renaud Barbier
- barebox support for 4460-based pandaboard ES?,
Robert P. J. Day
- [PATCH] Prepare to add more Samsung S3C CPUs to barebox,
Juergen Beisert
- [PATCH 09/14] MACH SAMSUNG/S3C: Rename register macros to reflect the MACH they are valid for, Juergen Beisert
- [PATCH 11/14] MACH SAMSUNG/S3C: Prepare watchdog unit to be shared in the S3C family, Juergen Beisert
- [PATCH 08/14] MACH SAMSUNG/S3C: Separate the clocksource for the S3C family, Juergen Beisert
- [PATCH 02/14] MACH SAMSUNG/S3C: Do not compile S3C24xx's GPIO support unconditionally, Juergen Beisert
- [PATCH 10/14] MACH SAMSUNG/S3C: Re-work the S3C family timer driver, Juergen Beisert
- [PATCH 07/14] MACH SAMSUNG/S3C: Separate S3C24XX clock management, Juergen Beisert
- [PATCH 12/14] MACH SAMSUNG/S3C: Unify the UART driver for the S3C family of CPUs, Juergen Beisert
- [PATCH 13/14] MACH SAMSUNG/S3C: Re-work the memory detection and handling, Juergen Beisert
- [PATCH 05/14] MACH SAMSUNG/S3C: Parts of the SDHC driver can be shared in the S3C CPU family, Juergen Beisert
- [PATCH 03/14] MACH SAMSUNG/S3C: Make it more generic for future updates, Juergen Beisert
- [PATCH 06/14] MACH SAMSUNG/S3C: Reflect the CPU name the LCD driver is for, Juergen Beisert
- [PATCH 04/14] MACH SAMSUNG/S3C: Use the correct CPU family name to reflect NAND driver's usage, Juergen Beisert
- [PATCH 14/14] MACH SAMSUNG/S3C: Re-work the GPIO handling for S3C24xx CPUs, Juergen Beisert
- [PATCH 01/14] MACH SAMSUNG: Rename the whole mach to add more CPUs in future, Juergen Beisert
- [PATCH] decompress_inflate.c: fix "no previous prototype for 'gunzip'" warning,
Antony Pavlov
- [RFC] net: dhcp: make serverip a magicvar, Wolfram Sang
- [PATCH] mxs: add support for mx28-evk,
Wolfram Sang
- [PATCH] uart drivers: use xzalloc instead of xmalloc, Sascha Hauer
- [PATCH V2 0/3] Add MSystems Disk-On-Chip G3 support,
Robert Jarzmik
- [PATCH 1/2] Add support for the Phytec phyCARD-A-L1 (PCA-A-L1).,
Juergen Kilb
- [PATCH V4 1/7] drivers/mtd: move nand.c into core.c,
Robert Jarzmik
- [PATCH] nand: drop some cruft,
Wolfram Sang
- [PATCH] command: flash: remove broken filename check, Wolfram Sang
- [PATCH] ARM: add board support for Phytec phyCARD-M aka pca101,
Sascha Hauer
- [PATCH 1/2] Add OpenRISC arch,
franck . jullien
- [PATCH V3 0/8] mtd framework rework,
Robert Jarzmik
- barebox build error : WATCHDOG_RESET,
Robert Jarzmik
- [PATCH] usb/gadget: add special treatment for PXA cpus,
Robert Jarzmik
- [PATCH] omap3: add register definitions for chip die ID,
Daniel Mack
- [PATCH] commands: really print BAREBOX_CMD_HELP_TEXT, Wolfram Sang
- Thumb-2 support,
Sascha Hauer
- Re: [PATCH 1/3] stringlist-functions: add sorted insert, Sascha Hauer
- Re: [PATCH 3/4] omap_hsmmc: setup mmc voltage on twl6030, Sascha Hauer
- Re: [PATCH 2/4] twl-core: add support for twl6030, Sascha Hauer
- [PATCH V2 0/8] mtd framework rework,
Robert Jarzmik
- [PATCH 1/2] scripts/Makefile.lib: update compress cmd support,
Jean-Christophe PLAGNIOL-VILLARD
- misc patches,
Sascha Hauer
- [PATCH 2/7] remove unused keyboard.h file, Sascha Hauer
- [PATCH 1/7] remove unused watchdog header, Sascha Hauer
- [PATCH 6/7] cdev: pass flags to open function, Sascha Hauer
- [PATCH 4/7] ARM: remove unused icache command, Sascha Hauer
- [PATCH 3/7] ARM cpuinfo: decode more bits, use ARRAY_SIZE, Sascha Hauer
- [PATCH 7/7] nand-bb: implement lseek in readonly mode, Sascha Hauer
- [PATCH 5/7] common.h: remove unused function declarations, Sascha Hauer
- <Possible follow-ups>
- misc patches, Sascha Hauer
- misc patches, Sascha Hauer
- [PATCH 06/11] globalvar: Do not modify already existing variables, Sascha Hauer
- [PATCH 08/11] scripts/Makefile: implement targetprogs-y, Sascha Hauer
- [PATCH 10/11] bootm needs uImage support. Select it, Sascha Hauer
- [PATCH 05/11] usb: Turn some printf into pr_*, Sascha Hauer
- [PATCH 02/11] detect command: Add missing help text for -a option, Sascha Hauer
- [PATCH 01/11] ARM: pfla02: Fix compiler warning, Sascha Hauer
- [PATCH 03/11] ata: ide-sff: Add missing wait for ready in write function, Sascha Hauer
- [PATCH 11/11] defenv-2: Do not overwrite previously existing global variables, Sascha Hauer
- [PATCH 04/11] move devinfo command to its own file, Sascha Hauer
- [PATCH 07/11] scripts/Makefile: cleanup, Sascha Hauer
- [PATCH 09/11] scripts: Move omap4_usbboot to its own directory, Sascha Hauer
- reimplement bootm support,
Sascha Hauer
- [PATCH 02/12] filetype: Add oftree detection, Sascha Hauer
- [PATCH 04/12] libbb: add read_full/write_full functions, Sascha Hauer
- [PATCH 01/12] oftree: add of_fix_tree(), Sascha Hauer
- [PATCH 03/12] uncompress: implement uncompress_fd_to_buf, Sascha Hauer
- [PATCH 05/12] ARM: call start_linux directly with initrd start/size and oftree, Sascha Hauer
- [PATCH 08/12] add uimage command, Sascha Hauer
- [PATCH 09/12] remove now obsolete iminfo command, Sascha Hauer
- [PATCH 11/12] move code now only used in mkimage to mkimage, Sascha Hauer
- [PATCH 06/12] reimplement uImage code, Sascha Hauer
- [PATCH 12/12] defaultenv: simplify boot, Sascha Hauer
- [PATCH 10/12] remove now unused uImage code, Sascha Hauer
- [PATCH 07/12] bootm: use new uimage code, Sascha Hauer
- Re: reimplement bootm support, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH v2] defaultenv: use a compressed version when embedded in barebox,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/3] usb-a926x: fix mem init,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/1] defaultenv: use a compressed version when embedded in barebox,
Jean-Christophe PLAGNIOL-VILLARD
- ppc work,
Sascha Hauer
- Linker question,
Franck JULLIEN
- [PATCH 1/1] at91: fix reset, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/2] iomux-mx25: update SD1 settings,
Eric Bénard
- [PATCH 1/1] poller_call: move from getc to is_timeout,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/2] imxfb: Add support for multiple video modes,
Christian Hemp
- [PATCH 1/6] i.MX25: fix LD16 & LD17 iomux,
Eric Bénard
- [PATCH 0/3] drivers/mtd: add support for docg3 chips,
Robert Jarzmik
- [re-PATCH 1/1] sanbox: add linux_execve and linux_exec command,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 0/2] drivers/mtd: add a core,
Robert Jarzmik
- magicvar breaks tftp (or ramfs),
Eric Bénard
- [PATCH v3] Add support for the more recent Davicom DM9000A and DM9000,
Juergen Beisert
- [PATCH 0/4] At91 fix + usb udc support, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/4] at91sam9263: fix mci clock,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH] pcm038: Updated NOR-Flash CS values,
Teresa Gámez
- [PATCH v2] Add support for the more recent Davicom DM9000A and DM9000,
Juergen Beisert
- [PATCH] Update README to refer to newer location of example environment,
Robert P. J. Day
- Re: [PATCH 2/5] twlcore: rename twl4030 to twlcore driver, Sascha Hauer
- [PATCH] Add support for the more recent Davicom DM9000A and DM9000B,
Juergen Beisert
- Re: [PATCH 2/2] auto-completion: add auto-completion for path files, Sascha Hauer
- Re: [PATCH 1/2] stringlist-functions: add sorted insert, Sascha Hauer
- [PATCH] Some trivial grammar/spelling fixes for main README file., Robert P. J. Day
- [PATCH] nios2: remove one "_" from etext an stext, franck . jullien
- Re: [PATCH 2/3] nandtest: add nandtest command, Sascha Hauer
- [PATCH v2 7/7] dss11: add defconfig, Michael Grzeschik
- [PATCH v2 6/7] platform: add support for aizo dSS11,
Michael Grzeschik
- [PATCH v2 5/7] arm: update mach-types, Michael Grzeschik
- [PATCH v2] at91sam9260_devices: add flag to change ETX{2,3} pincfg on add_device_eth,
Michael Grzeschik
- [PATCH 3/7] at91sam9260_devices: properly set slot id, Michael Grzeschik
- [PATCH 4/7] at91sam9260_devices: add flag to change ETX{2,3} pincfg on add_device_eth,
Michael Grzeschik
- [PATCH v2 2/7] atmel_mci: check for device id we use to address the right slot, Michael Grzeschik
- [PATCH v2 0/7] platformsupport for aizo dSS11, Michael Grzeschik
- [PATCH v2 1/7] storage/usb.c: fix test_unit_ready, Michael Grzeschik
- [PATCH] nand_omap_bch_decoder: Fix up error detection,
Teresa Gámez
- [RFC PATCH 0/3] add tlsf memory allocator,
Antony Pavlov
- [PATCH] ARM: pass -msoft-float, Sascha Hauer
- [PATCH] fix "no previous prototype for 'sbrk'" warning, Antony Pavlov
- [PATCH 2/2] time command: Fix needed string length, Sascha Hauer
- [PATCH 1/2] uncompress: fix uncompress_buf usage, Sascha Hauer
- [PATCH] ARM i.MX27: initialize MAX,
Sascha Hauer
- [PATCH V2 1/3] arm/mach-pxa: add MMC clock,
Robert Jarzmik
- [PATCH] compile (and warning) fixes for -next,
Sascha Hauer
- [PATCH 11/11] x86: Fix linker script for magic vars, Sascha Hauer
- [PATCH 03/11] remove unused Kconfig variable HAS_CFI, Sascha Hauer
- [PATCH 04/11] fix underscore count in bss_start/bss_stop, Sascha Hauer
- [PATCH 05/11] console_simple: fix compiler warning, Sascha Hauer
- [PATCH 01/11] mci s3c: remove unused code, Sascha Hauer
- [PATCH 02/11] memory: do not try to reserve iomem on sandbox, Sascha Hauer
- [PATCH 07/11] pxa: add type to Kconfig choice, Sascha Hauer
- [PATCH 06/11] net macb: remove unused variable, Sascha Hauer
- [PATCH 10/11] arm at91sam9260: Add missing AT91SAM_ETX2_ETX3_ALTERNATIVE define, Sascha Hauer
- [PATCH 09/11] arm eukrea boards: fix breakage after mach-types update, Sascha Hauer
- [PATCH 08/11] ft_build: temporarily disable bootm oftree support, Sascha Hauer
- v2011.12.0, Sascha Hauer
- [PATCH] make dos partition support default yes if we have disk partition support,
Sascha Hauer
- [PATCH 1/3] arm/mach-pxa: add MMC clock,
Robert Jarzmik
- [PATCH] MIPS: provide __bss_stop in linker script, Antony Pavlov
- FAT filesystem write and long names stability,
Robert Jarzmik
- [PATCH] mx53 update,
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/1] mci: add the probe parameter if any error happened during the probe, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH] fix cramfs support broken since zlib update, Sascha Hauer
- [PATCH] crc exit with COMMAND_ERROR_USAGE, Jan Weitzel
- cramfs broken on -next, Sascha Hauer
- [PATCH 2/2] ramfs: increase chunk size to 8192 bytes, Sascha Hauer
- [PATCH 1/2] add armlinux specific magicvar descriptions, Sascha Hauer
- [PATCH] i.MX53 sdhc,
Sascha Hauer
- [PATCH] resources,
Sascha Hauer
- [PATCH V3 1/3] arm/mach-pxa: Initial Intel/Marvell PXA support,
Robert Jarzmik
- [PATCH 1/1] lib: remove re-introduce sum in commit 9135dd5f672e: initial libfdt support, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH v2] sanbox: add linux_execve and linux_exec command, Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/2] use format(__printf__, a, b) instead of formart(printf, a, b),
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/1] Increase heapsize for i.MX21ADS board., Jaccon Bastiaansen
- uncompress work,
Sascha Hauer
- [PATCH 09/16] bootm: do not select uncompression methods, Sascha Hauer
- [PATCH 03/16] scripts/mkimage.c: remove unnecessary include, Sascha Hauer
- [PATCH 01/16] armlinux: remove unnecessary include, Sascha Hauer
- [PATCH 11/16] lzo: export decompress_unlzo function, Sascha Hauer
- [PATCH 08/16] lib: prompt for uncompression functions, Sascha Hauer
- [PATCH 12/16] Add generic uncompress function, Sascha Hauer
- [PATCH 14/16] update configs and default envs for uncompress, Sascha Hauer
- [PATCH 10/16] add file detection support, Sascha Hauer
- [PATCH 15/16] remove now unused unlzo function, Sascha Hauer
- [PATCH 16/16] bootm: use generic uncompress function, Sascha Hauer
- [PATCH 02/16] arm bootm: remove unnecessary include, Sascha Hauer
[Index of Archives]
[Linux Embedded]
[Linux USB Devel]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]