On 17 January 2012 18:53, Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx> wrote: > On 17:27 Tue 17 Jan , Antony Pavlov wrote: >> On 17 January 2012 17:09, Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> wrote: >> > On Tue, Jan 17, 2012 at 02:39:06PM +0400, Antony Pavlov wrote: >> >> Signed-off-by: Antony Pavlov <antonynpavlov@xxxxxxxxx> >> >> --- >> >> drivers/serial/serial_ns16550.c | 19 +++++++++++++++++-- >> >> include/ns16550.h | 2 ++ >> >> 2 files changed, 19 insertions(+), 2 deletions(-) >> >> >> >> diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c >> >> index 1217a5f..01de964 100644 >> >> --- a/drivers/serial/serial_ns16550.c >> >> +++ b/drivers/serial/serial_ns16550.c >> >> @@ -139,6 +139,8 @@ static unsigned int ns16550_calc_divisor(struct console_device *cdev, >> >> static void ns16550_serial_init_port(struct console_device *cdev) >> >> { >> >> unsigned int baud_divisor; >> >> + struct NS16550_plat *plat = (struct NS16550_plat *) >> >> + cdev->dev->platform_data; >> >> >> >> /* Setup the serial port with the defaults first */ >> >> baud_divisor = ns16550_calc_divisor(cdev, CONFIG_BAUDRATE); >> >> @@ -153,7 +155,13 @@ static void ns16550_serial_init_port(struct console_device *cdev) >> >> ns16550_write(cdev, (baud_divisor >> 8) & 0xff, dlm); >> >> ns16550_write(cdev, LCRVAL, lcr); >> >> ns16550_write(cdev, MCRVAL, mcr); >> >> - ns16550_write(cdev, FCRVAL, fcr); >> >> + >> >> + if (plat->flags & NS16650_FLAG_DISABLE_FIFO) { >> >> + ns16550_write(cdev, FCRVAL & ~FCR_FIFO_EN, fcr); >> >> + } else { >> >> + ns16550_write(cdev, FCRVAL, fcr); >> >> + } >> > >> > unnecessary braces here.. >> > >> >> + >> >> #ifdef CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS >> >> ns16550_write(cdev, 0x00, mdr1); >> >> #endif >> >> @@ -211,6 +219,8 @@ static int ns16550_tstc(struct console_device *cdev) >> >> static int ns16550_setbaudrate(struct console_device *cdev, int baud_rate) >> >> { >> >> unsigned int baud_divisor = ns16550_calc_divisor(cdev, baud_rate); >> >> + struct NS16550_plat *plat = (struct NS16550_plat *) >> >> + cdev->dev->platform_data; >> >> >> >> ns16550_write(cdev, 0x00, ier); >> >> ns16550_write(cdev, LCR_BKSE, lcr); >> >> @@ -218,7 +228,12 @@ static int ns16550_setbaudrate(struct console_device *cdev, int baud_rate) >> >> ns16550_write(cdev, (baud_divisor >> 8) & 0xff, dlm); >> >> ns16550_write(cdev, LCRVAL, lcr); >> >> ns16550_write(cdev, MCRVAL, mcr); >> >> - ns16550_write(cdev, FCRVAL, fcr); >> >> + if (plat->flags & NS16650_FLAG_DISABLE_FIFO) { >> >> + ns16550_write(cdev, FCRVAL & ~FCR_FIFO_EN, fcr); >> >> + } else { >> >> + ns16550_write(cdev, FCRVAL, fcr); >> >> + } >> > >> > and here. Otherwise this looks ok. >> >> Ok, I shall remove the braces. >> >> Sascha! >> >> We have special OMAP code, e.g.: >> >> #ifdef CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS >> ns16550_write(cdev, 0x07, mdr1); /* Disable */ >> #endif >> >> I think, that we can change it to something like this: >> >> if (plat->flags & NS16650_FLAG_OMAP_EXTENSIONS) >> ns16550_write(cdev, 0x07, mdr1); /* Disable */ > I don't like to add dead code in the binary > just use > if (IS_ENABLED(CONFIG_...) You is right, but there is another point of view. If you have defined CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS macro, then you will use OMAP extensions for __ALL__ ports, not only for OMAP internal port. May be OMAP have no other ports, only internal ports with extensions. But in any case it is bad design example: we have very special code (OMAP EXTENSIONS) in universal driver (ns16550), and this special code works without checking presents of the extensions. I don't like dead code too. So there are another solutions: #ifdef CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS if (plat->flags & NS16650_FLAG_OMAP_EXTENSIONS) ns16550_write(cdev, 0x07, mdr1); /* Disable */ #endif or even if (IS_ENABLED(CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS) && plat->flags & NS16650_FLAG_OMAP_EXTENSIONS) ns16550_write(cdev, 0x07, mdr1); /* Disable */ -- Best regards, Antony Pavlov _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox