Hi,
the following patch serie update nand, lowlevel init sram, gpio and
Atmel and Calao boards
The following changes since commit 06d9b16d98f9da5ff2b8ddf4bb3dea9e9352abf0:
atmel_nand: add on_flash_btt option to enable bbt option (2011-12-31 22:17:29 +0800)
are available in the git repository at:
git://uboot.jcrosoft.org/barebox.git at91
Jean-Christophe PLAGNIOL-VILLARD (12):
atmel: reference boards and Caloa boards bbt option enabled
ARM: import memcpy_from/toio and memset_io from linux
mtd: atmel_nand: optimize read/write buffer functions
atmel_nand: drop dead code
at91: add sram memory devices
at91sam9263ek: add nor partition
at91sam9x: switch lowlevel init to c
at91/gpio: simplify resources
usb-a926x: add led support
usb-a926x: add dfu support
at91_udc: update vbus param only if updated
usb-a926x: update defconfig
arch/arm/boards/at91sam9260ek/init.c | 1 +
arch/arm/boards/at91sam9261ek/init.c | 1 +
arch/arm/boards/at91sam9263ek/config.h | 18 --
arch/arm/boards/at91sam9263ek/env/config | 2 +
arch/arm/boards/at91sam9263ek/init.c | 1 +
arch/arm/boards/at91sam9m10g45ek/init.c | 1 +
arch/arm/boards/mmccpu/config.h | 18 --
arch/arm/boards/pm9261/config.h | 18 --
arch/arm/boards/pm9263/config.h | 18 --
arch/arm/boards/usb-a926x/env/bin/init_board | 43 ++++
arch/arm/boards/usb-a926x/init.c | 28 +++
arch/arm/configs/usb_a9260_defconfig | 20 ++-
arch/arm/configs/usb_a9263_128mib_defconfig | 20 ++-
arch/arm/configs/usb_a9263_defconfig | 20 ++-
arch/arm/configs/usb_a9g20_128mib_defconfig | 20 ++-
arch/arm/configs/usb_a9g20_defconfig | 20 ++-
arch/arm/include/asm/io.h | 7 +
arch/arm/lib/Makefile | 1 +
arch/arm/lib/io.c | 50 +++++
arch/arm/mach-at91/at91rm9200.c | 12 +-
arch/arm/mach-at91/at91rm9200_devices.c | 2 +
arch/arm/mach-at91/at91sam9260.c | 9 +-
arch/arm/mach-at91/at91sam9260_devices.c | 12 +
arch/arm/mach-at91/at91sam9261.c | 9 +-
arch/arm/mach-at91/at91sam9261_devices.c | 7 +
arch/arm/mach-at91/at91sam9263.c | 15 +-
arch/arm/mach-at91/at91sam9263_devices.c | 4 +
arch/arm/mach-at91/at91sam926x_lowlevel_init.S | 278 ------------------------
arch/arm/mach-at91/at91sam926x_lowlevel_init.c | 171 +++++++++++++++
arch/arm/mach-at91/at91sam9g45.c | 15 +-
arch/arm/mach-at91/at91sam9g45_devices.c | 2 +
arch/arm/mach-at91/gpio.c | 13 +-
arch/arm/mach-at91/include/mach/at91rm9200.h | 9 +-
arch/arm/mach-at91/include/mach/at91sam9260.h | 17 ++-
arch/arm/mach-at91/include/mach/at91sam9261.h | 10 +-
arch/arm/mach-at91/include/mach/at91sam9263.h | 11 +-
arch/arm/mach-at91/include/mach/at91sam9g45.h | 11 +-
arch/arm/mach-at91/include/mach/gpio.h | 4 -
drivers/mtd/nand/atmel_nand.c | 46 +----
drivers/usb/gadget/at91_udc.c | 17 ++-
drivers/usb/gadget/at91_udc.h | 1 +
41 files changed, 497 insertions(+), 485 deletions(-)
create mode 100644 arch/arm/boards/usb-a926x/env/bin/init_board
create mode 100644 arch/arm/lib/io.c
delete mode 100644 arch/arm/mach-at91/at91sam926x_lowlevel_init.S
create mode 100644 arch/arm/mach-at91/at91sam926x_lowlevel_init.c
Best Regards,
J.
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
