Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
---
arch/arm/boards/usb-a926x/init.c | 18 ++++++++++++++++++
1 files changed, 18 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boards/usb-a926x/init.c b/arch/arm/boards/usb-a926x/init.c
index 41daab8..469d98e 100644
--- a/arch/arm/boards/usb-a926x/init.c
+++ b/arch/arm/boards/usb-a926x/init.c
@@ -37,6 +37,7 @@
#include <mach/at91sam9_smc.h>
#include <mach/sam9_smc.h>
#include <gpio.h>
+#include <led.h>
#include <mach/io.h>
#include <mach/at91_pmc.h>
#include <mach/at91_rstc.h>
@@ -182,6 +183,22 @@ static void __init ek_add_device_udc(void)
at91_add_device_udc(&ek_udc_data);
}
+struct gpio_led led = {
+ .gpio = AT91_PIN_PB21,
+ .led = {
+ .name = "user_led",
+ },
+};
+
+static void __init ek_add_led(void)
+{
+ if (machine_is_usb_a9263())
+ led.active_low = 1;
+
+ at91_set_gpio_output(led.gpio, led.active_low);
+ led_gpio_register(&led);
+}
+
static int usb_a9260_mem_init(void)
{
#ifdef CONFIG_AT91_HAVE_SRAM_128M
@@ -202,6 +219,7 @@ static int usb_a9260_devices_init(void)
usb_a9260_add_device_mci();
at91_add_device_usbh_ohci(&ek_usbh_data);
ek_add_device_udc();
+ ek_add_led();
armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
usb_a9260_set_board_type();
--
1.7.7
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
