U-Boot V2 Development (Barebox)

• Thread Index

• [PATCH 3/5] commands: nv: assure error code will be returned when an error occurred
  • From: Enrico Jorns <ejo@xxxxxxxxxxxxxx>
• [PATCH 2/5] commands: nv: call nvvar_print() only if no argument is given
  • From: Enrico Jorns <ejo@xxxxxxxxxxxxxx>
• [PATCH 1/5] commands: nv: argc cannot be < 1
  • From: Enrico Jorns <ejo@xxxxxxxxxxxxxx>
• Re: [ptxdist] boot problem w/ barebox
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/3] net: ath79: add ag71xx Ethernet driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 08/10] rename tplink devicetree
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 07/10] add phy: ar8327 driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 02/10] MIPS: dts: ar9331: update compatible for mac0 node
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 01/10] net: ath79: add ar9344 support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: boot problem w/ barebox
  • From: "Enrico Weigelt, metux IT consult" <enrico.weigelt@xxxxxxxx>
• Re: boot problem w/ barebox
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• PBL using xz
  • From: zjh <jianhuizhao.329@xxxxxxxxx>
• boot problem w/ barebox
  • From: "Enrico Weigelt, metux IT consult" <enrico.weigelt@xxxxxxxx>
• v2017.09.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] gpio: gpio-generic: add dt support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] privide ns16550 support for AR9344
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] efi: add iBASE MI991AF documentation.
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] efi: make sure efi-fs is started in the right order
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: efi: add example how to create EFI partition
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] privide ns16550 support for AR9344
  • From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] gpio: gpio-generic: add dt support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 0/2] gpio: gpio-generic: add dt support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 1/2] gpio: gpio-generic: fix bgpio_map()
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 1/4] of: base: port of_device_is_big_endian from linux
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH 2/4] asm-generic: partially sync io.h with linux kernel
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH 3/4] x86: asm: include asm-generic.h
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH 4/4] serial: ns16550: provide big-endian support
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH 0/4] privide ns16550 support for AR9344
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH] efi: add iBASE MI991AF documentation.
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v1] usb: gadget: autostart: properly release f_multi_opts
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Request for testing on beagleboard
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] Phy: Check NULL bus case and undetected phy via of
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] arm: dts: am335x: Add emmc node to phycore-som
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] at91: sync mach/barebox-arm-head.h
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] efi: make sure efi-fs is started in the right order
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] gpio: clps711x: clps711x_gpio_dt_ids: add missing sentinel entry
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] gpio: gpio-generic: fix bgpio_map()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] regsubst.pl: fix typo in help text
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/6] Add DT support for at91_udc and atmel_lcdfb
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Rework of the state/bootchooser feature documentaiton
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] state: provide an error message when an error occurs
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] state: use the given backend storage type name
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] Documentation: efi: add example how to create EFI partition
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] phy: don't crush if we have no parent
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: phycore-imx6ul: use MAC address from OCOTP
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: nand-mxs: improve error messages
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/2] mtd: nand: Only call ONFI get/set features on supported chips
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2] mtd: nand: nand_mxs: Don't call get/set features on chips which do not support it
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] Phy: Check NULL bus case and undetected phy via of
  • From: Clément Leger <cleger@xxxxxxxxx>
• [PATCH 2/2] fs: Don't bother filesystems without link support with additional stat() calls
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Fix tftpd-hpa support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/2] fs: avoid pathes with '//' in __canonicalize_path()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/2] gpio: gpio-generic: fix bgpio_map()
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 2/2] gpio: gpio-generic: add dt support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 0/2] gpio: gpio-generic: add dt support
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v2] gpio: clps711x: clps711x_gpio_dt_ids: add missing sentinel entry
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH v2 2/4] asm-generic: partially sync io.h with linux kernel
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [BUG] TFTP: No access to subdirectories
  • From: Dennis Menschel <menschel-d@xxxxxxxxx>
• Re: [BUG] TFTP: No access to subdirectories
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [BUG] TFTP: No access to subdirectories
  • From: Dennis Menschel <menschel-d@xxxxxxxxx>
• Re: nand dump
  • From: Jan Lübbe <jlu@xxxxxxxxxxxxxx>
• nand dump
  • From: zjh <jianhuizhao.329@xxxxxxxxx>
• Re: TCP
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: TCP
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: TCP
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• TCP
  • From: zjh <jianhuizhao.329@xxxxxxxxx>
• [PATCH v1 07/10] add phy: ar8327 driver
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v1 04/10] MIPS: dts: tl_wdr4300: enable mac0
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v1 00/10] provide ethernet support for ar9344 and TP-LINK TL-WDR4300
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v1 02/10] MIPS: dts: ar9331: update compatible for mac0 node
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v1 06/10] MIPS: dts: tl_wdr4300: remove RO flag from barebox partition
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v1 05/10] MIPS: dts: tl_wdr4300: add alias for spiflash
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v1 10/10] MIPS: dts: ar9344: add APB bus
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v1 08/10] rename tplink devicetree
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v1 03/10] MIPS: dts: ar9344: add mac0 node
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v1 01/10] net: ath79: add ar9344 support
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v1 09/10] MIPS: tplink-wdr4300_defconfig: add network support
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH] phy: don't crush if we have no parent
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH] ARM: phycore-imx6ul: use MAC address from OCOTP
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] mtd: nand-mxs: improve error messages
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2] docs: mention the correct default values for the 'backend-storage-type'
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• Re: [PATCH] docs: mention the correct default values for the 'backend-storage-type'
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• [PATCH] docs: mention the correct default values for the 'backend-storage-type'
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] TFTP: Add support for custom server and port
  • From: Clément Leger <cleger@xxxxxxxxx>
• [PATCH 4/4] arm: configs: AM335x: Enable mmc-extcsd command
  • From: Daniel Schultz <d.schultz@xxxxxxxxx>
• [PATCH 2/4] arm: dts: Enable NAND in DTS instead of DTSI
  • From: Daniel Schultz <d.schultz@xxxxxxxxx>
• [PATCH 1/4] arm: dts: am335x: Add emmc node to phycore-som
  • From: Daniel Schultz <d.schultz@xxxxxxxxx>
• [PATCH 3/4] arm: dts: am335x: Add phycore emmc device tree
  • From: Daniel Schultz <d.schultz@xxxxxxxxx>
• Re: [PATCH 1/1] TFTP: Add support for custom server and port
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mtd: nand_mxs: fix NAND error when change clk rate
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH] mtd: nand_mxs: fix NAND error when change clk rate
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/1] TFTP: Add support for custom server and port
  • From: Clément Leger <cleger@xxxxxxxxx>
• [PATCH] ARM: beagleboard: convert to devicetree
  • From: "Denis 'GNUtoo' Carikli" <GNUtoo@xxxxxxxxxx>
• Request for testing on beagleboard
  • From: "Denis 'GNUtoo' Carikli" <GNUtoo@xxxxxxxxxx>
• [PATCH v1 1/3] net: ath79: add ag71xx Ethernet driver
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v1 3/3] add ar9331.dtsi and enable mac0
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v1 2/3] net: ag71xx: bit 19 should be set to 1 for GE0
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 1/4] of: base: port of_device_is_big_endian from linux
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 2/4] asm-generic: partially sync io.h with linux kernel
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 4/4] serial: ns16550: provide big-endian support
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 3/4] x86: asm: include asm-generic.h
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 0/4] privide ns16550 support for AR9344
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] Add new command fs2bridge for socfpga
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 2/2] state: don't use uninitialized variable
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• [PATCH 1/2] state: use the given backend storage type name
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] state: provide an error message when an error occurs
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] state: provide an error message when an error occurs
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/3] state: provide an error message when an error occurs
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• [PATCH 3/3] state command: extend help part II
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• [PATCH 2/3] state command: extend help part I
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: mvebu: armada-xp: configure PLL and PHY register
  • From: Jan Lübbe <jlu@xxxxxxxxxxxxxx>
• [PATCH] i2c: mv64xxx: add timeout waiting for bus ready
  • From: Bastian Stender <bst@xxxxxxxxxxxxxx>
• Re: Barebox and ext4 ? problems
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: Barebox and ext4 ? problems
  • From: Holger Schurig <holgerschurig@xxxxxxxxx>
• Re: [PATCH] ARM: mvebu: armada-xp: configure PLL and PHY register
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: Barebox and ext4 ? problems
  • From: Simon Aittamaa <simon.aittamaa@xxxxxxxxx>
• [PATCH 7/7] docs: rework and extend the 'state' and 'bootchooser' documentation
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• [PATCH 2/7] state: keep backward compatibility
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• [PATCH 5/7] docs: remove build warning
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• [PATCH 3/7] bootchooser: avoid a use after free
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• [PATCH 1/7] docs/DS1307: fix layout
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• [PATCH 4/7] bootchooser: allow an empty namespace
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• [PATCH 6/7] state: add debugging help
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• Rework of the state/bootchooser feature documentaiton
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• [PATCH] ARM: mvebu: armada-xp: configure PLL and PHY register
  • From: Jan Luebbe <jlu@xxxxxxxxxxxxxx>
• Re: Barebox and ext4 ? problems
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• Barebox and ext4 ? problems
  • From: Holger Schurig <holgerschurig@xxxxxxxxx>
• [PATCH v3] MIPS: add virt_to_phys() and phys_to_virt()
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] MIPS: add virt_to_phys() and phys_to_virt()
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH v2] MIPS: add virt_to_phys() and phys_to_virt()
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] Add new command fs2bridge for socfpga
  • From: Mabcded Babcde <thepusherpushes@xxxxxxxxx>
• Re: [PATCH 1/2] ARM: i.MX7: provide DDR register definitions
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] readline_simple: return -1 if getc fails
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH 0/2] readline_simple: return -1 if getc fails
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] readline_simple: return -1 if getc fails
  • From: Gaël PORTAY <gael.portay@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v1 1/4] MIPS: tplink-mr3020: pbl: move WMAC init after flash addr test
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v1 2/4] MIPS: tplink-mr3020: pbl: move hornet_mips24k_cp0_setup after flash addr test
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v1 4/4] MIPS: tplink-mr3020.dts: add partition table
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v1 3/4] MIPS: tplink-mr3020_defconfig: enable more options
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v1] MIPS: ath79: add barebox update handler
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v1] filetype: fix file type detection for Barebox MIPS
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v1 2/3] MIPS: ath79: add initial QCA AR9344 SoC support
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v1 3/3] MIPS: ath79: add TP-Link WDR4300 board support
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v1 1/3] MIPS: ath79: provide CONFIG_SOC_QCA_AR9331 option
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v1 0/3] provide basic support for TP-Link WDR4300
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 01/13] MIPS: ath79: provide CONFIG_SOC_QCA_AR9331 option
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] readline_simple: return -1 if getc fails
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH 0/2] readline_simple: return -1 if getc fails
  • From: Gaël PORTAY <gael.portay@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] readline_simple: remove obsolete documentation
  • From: Gaël PORTAY <gael.portay@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/2] readline_simple: return -1 if getc fails
  • From: Gaël PORTAY <gael.portay@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] readline_simple: return -1 if getc fails
  • From: Gaël PORTAY <gael.portay@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] readline_simple: return -1 if getc fails
  • From: Gaël PORTAY <gael.portay@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] readline_simple: return -1 if getc fails
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• Re: [PATCH 1/2] readline_simple: return -1 if getc fails
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] readline_simple: return -1 if getc fails
  • From: Gaël PORTAY <gael.portay@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] readline_simple: return -1 if getc fails
  • From: Gaël PORTAY <gael.portay@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] readline_simple: return -1 if getc fails
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• Re: [PATCH 1/2] readline_simple: return -1 if getc fails
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v2 05/13] net: ath79: add ag71xx Ethernet driver
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/2] readline_simple: remove obsolete documentation
  • From: Gaël PORTAY <gael.portay@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/2] readline_simple: return -1 if getc fails
  • From: Gaël PORTAY <gael.portay@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] readline_simple: return -1 if getc fails
  • From: Gaël PORTAY <gael.portay@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 05/13] net: ath79: add ag71xx Ethernet driver
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: [PATCH v2 04/13] MIPS: add virt_to_phys() and phys_to_virt()
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• [PATCH v2 02/13] MIPS: ath79: add initial QCA AR9344 SoC support
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 03/13] MIPS: ath79: add TP-Link WDR4300 board support
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 05/13] net: ath79: add ag71xx Ethernet driver
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 13/13] filetype: fix file type detection for Barebox MIPS
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 10/13] MIPS: tplink-mr3020.dts: add partition table
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 12/13] MIPS: ath79: add barebox update handler
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 07/13] MIPS: tplink-mr3020: pbl: move WMAC init after flash addr test
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 01/13] MIPS: ath79: provide CONFIG_SOC_QCA_AR9331 option
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 08/13] MIPS: tplink-mr3020: pbl: move hornet_mips24k_cp0_setup after flash addr test
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 09/13] MIPS: tplink-mr3020_defconfig: enable more options
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 06/13] net: ag71xx: bit 19 should be set to 1 for GE0
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 11/13] MIPS: ar9344.dtsi: add ag71xx Ethernet driver
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 04/13] MIPS: add virt_to_phys() and phys_to_virt()
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: imx7: sabreSD: remove duplicate DT nodes
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: imx: add stub for imx7_uart_setup_ll
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: imx: ccmx53: select I2C
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/3] ARM: imx: fix phyBOARD-Zeta pinfunc typo
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/3] ARM: imx: build imx6.o as ARMv7
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: imx: imx7 has a fec
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: v2017.08.0
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH] scripts/imx: fix out-of-bounds access for big DCD tables
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: Bootchooser has unexpected changes of variable 'remaining_attempts'
  • From: Norbert Wiedmann <info@xxxxxxxxxxxxx>
• Re: [PATCH] Add new command fs2bridge for socfpga
  • From: Mabcded Babcde <thepusherpushes@xxxxxxxxx>
• [PATCH v2] gpio: clps711x: clps711x_gpio_dt_ids: add missing sentinel entry
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] ARM: imx: imx7 has a fec
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] clk: imx: cpu: don't store the address of a function parameter
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] spi: imx: don't loop endlessly
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v1 3/3] MIPS: ath79: add TP-Link WDR4300 board support
  • From: Oleksij Rempel <fishor@xxxxxxx>
• Re: [PATCH 0/2] spi: imx: don't loop endlessly
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 0/2] spi: imx: don't loop endlessly
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] spi: imx: don't loop endlessly
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] spi: imx: don't loop endlessly
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 0/2] spi: imx: don't loop endlessly
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 0/2] spi: imx: don't loop endlessly
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/2] spi: imx: add timeout to xchg_single
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/2] spi: imx: add error checking
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: i2c_read_reg on phytec-som-am335x returns wrong data from EEPROM
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• i2c_read_reg on phytec-som-am335x returns wrong data from EEPROM
  • From: Martin Hollingsworth <Martin.Hollingsworth@xxxxxxxxxxxxxxxxxx>
• [PATCH] loadxy: add missing ) to help text
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] gpio: clps711x: clps711x_gpio_dt_ids: add missing sentinel entry
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH] gpio: clps711x: clps711x_gpio_dt_ids: add missing sentinel entry
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: Bootchooser has unexpected changes of variable 'remaining_attempts'
  • From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 4/4] fpga: add fpga-region support
  • From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
• Re: [PATCH v3 00/11] i.MX7 SabreSD support
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v3 00/11] i.MX7 SabreSD support
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v1 2/3] MIPS: ath79: add initial QCA AR9344 SoC support
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v1 3/3] MIPS: ath79: add TP-Link WDR4300 board support
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v1 1/3] MIPS: ath79: provide CONFIG_SOC_QCA_AR9331 option
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v1 0/3] provide QCA AR9344 support
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] Add new command fs2bridge for socfpga
  • From: Mabcded Babcde <thepusherpushes@xxxxxxxxx>
• Re: Bootchooser has unexpected changes of variable 'remaining_attempts'
  • From: Norbert Wiedmann <info@xxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] serial: ns16550: provide big-endian support
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH] ARM: imx: phyCORE i.MX7: use register defines in dcd table
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] regsubst.pl: fix typo in help text
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [RFC PATCH 2/4] drivers: add fpga bridge framework
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [RFC PATCH 3/4] drivers: fpga: add socfpga bridges
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [RFC PATCH 1/4] reset: add of_reset_control_get to header
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [RFC PATCH 4/4] fpga: add fpga-region support
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: [PATCH] Add new command fs2bridge for socfpga
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: v2017.08.0
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• v2017.08.0
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] Add new command fs2bridge for socfpga
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v1 2/2] serial: ns16550: provide big-endian support
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] of: base: port of_device_is_big_endian from linux
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] Add new command fs2bridge for socfpga
  • From: Mabcded Babcde <thepusherpushes@xxxxxxxxx>
• [PATCH] ARM: i.MX7: Warp7: Add some code comments
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 3/4 v2] ARM: imx: clocksource: make warning a bit more helpful
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] ARM: imx: clocksource: make warning a bit more helpful
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 4/4] ARM: i.MX7: drop now useless imx7s.dtsi
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 3/4] ARM: imx: clocksource: make warning a bit more helpful
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/4] ARM: imx: clocksource: Use per clock for determining parent freq
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 4/4] ARM: i.MX7: drop now useless imx7s.dtsi
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/4] ARM: imx: clocksource: error out if clk freq is 0
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v3 04/11] ARM: i.MX: Import mx7d_pins.h from U-Boot
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 11/11] ARM: i.MX: Add support for NXP i.MX7 SABRESD board
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 07/11] ARM: i.MX: Add minimal imx7-ccm-regs.h
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 10/11] include: Add phy-id-list.h
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 09/11] ARM: i.MX: Import imx7-iomuxc-gpr.h from Linux kernel
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 08/11] ARM: i.MX: Add ARCH_HAD_FEC_IMX to ARCH_IMX7
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 06/11] ARM: i.MX: Add imx7_uart_setup_ll()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 01/11] gpiolib: Fix buggy flag detection code
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 02/11] gpiolib: Simplify code of gpio_request_one()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 05/11] ARM: i.MX: Add mx7_setup_pad()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 03/11] clk: i.MX7: Remove unused UART clocks array
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v3 00/11] i.MX7 SabreSD support
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] Add new command fs2bridge for socfpga
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] Add new command fs2bridge for socfpga
  • From: Mabcded Babcde <thepusherpushes@xxxxxxxxx>
• Re: [PATCH] Add new command fs2bridge for socfpga
  • From: Mabcded Babcde <thepusherpushes@xxxxxxxxx>
• Re: [PATCH] Add new command fs2bridge for socfpga
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] Add new command fs2bridge for socfpga
  • From: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
• [PATCH] Add new command fs2bridge for socfpga
  • From: Mabcded Babcde <thepusherpushes@xxxxxxxxx>
• Re: [PATCH v1] MIPS: add 74Kc info
  • From: Oleksij Rempel <ore@xxxxxxxxxxxxxx>
• Re: [PATCH v1] MIPS: add 74Kc info
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH v1] MIPS: add 74Kc info
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 1/2] of: base: port of_device_is_big_endian from linux
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 2/2] serial: ns16550: provide big-endian support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 00/11] i.MX7 SabreSD support
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH v2 11/11] ARM: i.MX: Add support for NXP i.MX7 SABRESD board
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: i.MX7: provide DDR register definitions
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH v2 04/11] ARM: i.MX: Import mx7d_pins.h from U-Boot
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 11/11] ARM: i.MX: Add support for NXP i.MX7 SABRESD board
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 08/11] ARM: i.MX: Add ARCH_HAD_FEC_IMX to ARCH_IMX7
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 09/11] ARM: i.MX: Import imx7-iomuxc-gpr.h from Linux kernel
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 10/11] include: Add phy-id-list.h
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 07/11] ARM: i.MX: Add minimal imx7-ccm-regs.h
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 06/11] ARM: i.MX: Add imx7_uart_setup_ll()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 05/11] ARM: i.MX: Add mx7_setup_pad()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 00/11] i.MX7 SabreSD support
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 02/11] gpiolib: Simplify code of gpio_request_one()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 01/11] gpiolib: Fix buggy flag detection code
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 03/11] clk: i.MX7: Remove unused UART clocks array
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 1/2] ARM: i.MX7: provide DDR register definitions
  • From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
• [PATCH v1] usb: gadget: autostart: properly release f_multi_opts
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: imx: remove DCD files from Makefiles
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH] ARM: imx: remove DCD files from Makefiles
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 1/9] gpiolib: Fix buggy flag detection code
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 0/9] i.MX7 SabreSD support
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 9/9] ARM: i.MX: Add support for NXP i.MX7 SABRESD board
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] ARM: imx: remove DCD files from Makefiles
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 9/9] ARM: i.MX: Add support for NXP i.MX7 SABRESD board
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 9/9] ARM: i.MX: Add support for NXP i.MX7 SABRESD board
  • From: Stefan Lengfeld <contact@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: i.MX7: provide DDR register definitions
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 0/9] i.MX7 SabreSD support
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 9/9] ARM: i.MX: Add support for NXP i.MX7 SABRESD board
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 1/9] gpiolib: Fix buggy flag detection code
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 3/9] ARM: i.MX: Import mx7d_pins.h from U-Boot
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 9/9] ARM: i.MX: Add support for NXP i.MX7 SABRESD board
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 8/9] ARM: i.MX: Import imx7-iomuxc-gpr.h from Linux kernel
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 6/9] ARM: i.MX: Add minimal imx7-ccm-regs.h
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 7/9] ARM: i.MX: Add ARCH_HAD_FEC_IMX to ARCH_IMX7
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 4/9] ARM: i.MX: Add mx7_setup_pad()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/9] gpiolib: Fix buggy flag detection code
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 0/9] i.MX7 SabreSD support
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 5/9] ARM: i.MX: Add imx7_uart_setup_ll()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/9] clk: i.MX7: Remove unused UART clocks array
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] video/ssd1307fb: add support for VBAT
  • From: Bastian Stender <bst@xxxxxxxxxxxxxx>
• Bootchooser has unexpected changes of variable 'remaining_attempts'
  • From: Norbert Wiedmann <info@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: i.MX7: provide DDR register definitions
  • From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: i.MX7: provide DDR register definitions
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: i.MX7: provide DDR register definitions
  • From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: use register defines in the dcd table of the WaRP7
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: i.MX7: provide DDR register definitions
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2] scripts: Provide script that helps using cpp defines in dcd tables
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• AW: Barebox state on am335x-phytec-phycore-som
  • From: Martin Hollingsworth <Martin.Hollingsworth@xxxxxxxxxxxxxxxxxx>
• Re: Barebox state on am335x-phytec-phycore-som
  • From: Çağlar Kilimci <ckilimci@xxxxxxxxx>
• [PATCH 6/6] atmel_lcdfb: add DT support
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 2/6] atmel_lcdfb: move dmacon, lcdcon2 to local data
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 4/6] atmel_lcdfb: define power_control gpio in platform_data
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 1/6] at91_udc: add DT support
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 3/6] atmel_lcdfb: move lcd_wiring_mode, have_intensity_bit to local data
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 5/6] atmel_lcdfb: move pdata init to a separate function
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 0/6] Add DT support for at91_udc and atmel_lcdfb
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: Barebox state on am335x-phytec-phycore-som
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Barebox state on am335x-phytec-phycore-som
  • From: Martin Hollingsworth <Martin.Hollingsworth@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/6] assorted fixes, mainly at91 related
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/3] ARM: imx: kindle: select ARM_LINUX
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: at91: animeo: depend on !CONSOLE_NONE
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/3] ARM: imx: hab: depend on OFDEVICE
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 6/6] atmel_lcdfb: fix so the correct guard_time is used
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 4/6] pinctrl: at91: move initcalls to postcore_initcall
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 3/6] clk: at91: fix clk-main
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 5/6] mci: atmel_mci: fix devinfo DEV with OF enabled
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 1/6] arm: at91 bootstrap: declare local function static
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 2/6] macb: fix clock probing with DT
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 0/6] assorted fixes, mainly at91 related
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH v2] ARM: imx: phyCORE i.MX7 on phyBOARD-Zeta support
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] scripts: Provide script that helps using cpp defines in dcd tables
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 4/4] ARM: rdu2: include defaultenv from board
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH] scripts: Provide script that helps using cpp defines in dcd tables
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/4] ARM: rdu2: use the upstream accepted DT
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 4/4] ARM: rdu2: include defaultenv from board
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/4] ARM: rdu2: remove unecessary includes
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/4] ARM: rdu2: remove USB VBUS GPIO init
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/3] video: tc358767: demote ASSR enable failure to debug level
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/3] video: IPUv3-LDB: fix dual-channel mode
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/3] clk: clk-fixed-factor: remove leftover debugging
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] state: backend_bucket_circular: promote old state debug message to info
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• [PATCH] state: backend_storage: remove unreachable error message
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• [PATCH] state: backend_bucket_circular: fix old state reads
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/23] at91: move reset vector to board code
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH v2 0/23] at91: move reset vector to board code
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: stable release v2017.05.4, v2017.06.2, v2017.07.1
  • From: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
• stable release v2017.05.4, v2017.06.2, v2017.07.1
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] at91sam9263ek: enable multi-image build
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• how to make barebox supports pcf font format support
  • From: Kevin Du Huanpeng <u74147@xxxxxxxxx>
• Re: [PATCH] i.MX: clk-pllv3: Initially disable PLL_BYPASS bit
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v2] crypto: caam: use dma_alloc_coherent instead of dma_alloc
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] i.MX: clk-pllv3: Initially disable PLL_BYPASS bit
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH] i.MX: clk-pllv3: Initially disable PLL_BYPASS bit
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH] i.MX: clk-pllv3: Initially disable PLL_BYPASS bit
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: Bootchooser - remaining_attempts
  • From: Çağlar Kilimci <ckilimci@xxxxxxxxx>
• Re: [PATCH v1] crypto: caam: use dma_alloc_coherent instead of dma_alloc
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2] crypto: caam: use dma_alloc_coherent instead of dma_alloc
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1] crypto: caam: use dma_alloc_coherent instead of dma_alloc
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] i.MX: clk-pllv3: Initially disable PLL_BYPASS bit
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH v1] crypto: caam: use dma_alloc_coherent instead of dma_alloc
  • From: Robert Schwebel <r.schwebel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 6/9] efi: efi: load state from devicetree
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH v1] crypto: caam: use dma_alloc_coherent instead of dma_alloc
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] scripts: socfpga_get_sequencer: update importer
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: Bootchooser - remaining_attempts
  • From: B Gol <behnam_golds@xxxxxxxxx>
• AW: Bootchooser - remaining_attempts
  • From: Martin Hollingsworth <Martin.Hollingsworth@xxxxxxxxxxxxxxxxxx>
• [PATCH] i.MX: clk-pllv3: Initially disable PLL_BYPASS bit
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: imx: phyCORE i.MX7 on phyBOARD-Zeta support
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v2 11/11] net: macb: Add DT support
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] ARM: imx: phyCORE i.MX7 on phyBOARD-Zeta support
  • From: Stefan Lengfeld <contact@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: imx: phyCORE i.MX7 on phyBOARD-Zeta support
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH] ARM: imx: phyCORE i.MX7 on phyBOARD-Zeta support
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: imx6: add static annotation locally used functions
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: imx6: move MX6UL enet setup out of CPU string setting
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: imx: phyCORE i.MX7 on phyBOARD-Zeta support
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH] ARM: imx: phyCORE i.MX7 on phyBOARD-Zeta support
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH] ARM: imx: phyCORE i.MX7 on phyBOARD-Zeta support
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v2 6/9] efi: efi: load state from devicetree
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: imx: use register defines in imxcfg files instead of plain numbers
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH v2 6/9] efi: efi: load state from devicetree
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH v2 5/9] of: of_path: find device via partuuid
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH v2 1/9] state: fix compile warnings for dev_err expansion
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH v2 3/9] fs: efi: return with correct error code in efifs_stat
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH v2 4/9] devfs-core: add function to find cdev by partuuid
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH v2 9/9] efi_defconfig: enable STATE
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH v2 7/9] blspec: skip all devicetree tests if entry doesn't specify one
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH v2 2/9] common: efi: do not use undefined kconfig option
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH v2 8/9] efi: efi: register barebox-update handler
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: Next step to enable DT support for at91sam9263ek?
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] gpio: move active state function stubs to GPIOLIB
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] crypto: digest: Fix digesting over memory chunks > 4096 bytes
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] ARM: imx: remove DCD files from Makefiles
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: Bootchooser - remaining_attempts
  • From: Çağlar Kilimci <ckilimci@xxxxxxxxx>
• Re: [PATCH v2 11/11] net: macb: Add DT support
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Next step to enable DT support for at91sam9263ek?
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 2/2] at91sam9263ek: enable multi-image build
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 1/2] at91: sync mach/barebox-arm-head.h
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH v2 0/3] make power off work on iMX6S RIoTBoard
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] gpio: fix null pointer exception when there is no oftree
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 08/23] pm9263: move reset vector to board code
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 14/23] at91: delete unused at91sam9263_lowlevel_init.c
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 12/23] qil-a926x: move reset vector to board code
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 22/23] telit-evk-pro3: move reset vector to board code
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 23/23] at91: remove leftovers from reset code in mach-at91
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 19/23] pm9g45: move reset vector to board code
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 18/23] at91sam9m10ihd: move reset vector to board code
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 21/23] dss11: move reset vector to board code
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 20/23] animeo: move reset vector to board code
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 16/23] at91sam{9260, 9G20, 9m10g45, 9n12}ek: move reset vector to board code
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 17/23] at91rm9200ek: move reset vector to board code
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 11/23] tny-a926x: move reset vector to board code
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 15/23] sama5d{3, 4}{xek, xplained}: move reset vector to board code
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 10/23] at91: delete at91sam926x_lowlevel_init
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 07/23] mmccpu: move reset vector to board code
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 13/23] haba-knx: move reset vector to board code
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 09/23] usb-a926x: move reset vector to board code
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 06/23] at91: drop unused at91sam9261_lowlevel_init
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 01/23] at91: refactor lowlevel_init selection
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 03/23] at91sam9263ek: move reset vector to board code
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 04/23] at91sam9261ek, at91sam9g10ek: move reset vector to board code
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 05/23] pm9261: move reset vector to board code
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 02/23] at91: drop unused at91sam9x5_lowlevel_init.c
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH v2 0/23] at91: move reset vector to board code
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• New status of your UPS delivery (code: 007329866)
  • From: webnl@xxxxxxxxxxxx
• [PATCH v2 1/3] ARM: riotboard: provide standby on power off option
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] ARM: i.MX: provide handler for power off over standby
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] regulator: pfuze: provide power over standby handler
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 0/3] make power off work on iMX6S RIoTBoard
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] gpio: fix null pointer exception when there is no oftree
  • From: Alexander Kurz <akurz@xxxxxxxx>
• Re: [PATCH] ARM: imx: use register defines in imxcfg files instead of plain numbers
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] crypto: digest: Fix digesting over memory chunks > 4096 bytes
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v1 3/3] regulator: pfuze: provide power over standby handler
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• RE: Earliest possible GPIO toggle on i.mx6
  • From: Mayur Nande <Mayur.Nande@xxxxxxxxx>
• [PATCH 1/2] scripts: socfpga_get_sequencer: update importer
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 2/2] Documentation: socfpga: update sequencer documentation
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: [PATCH v1 3/3] regulator: pfuze: provide power over standby handler
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH v1 3/3] regulator: pfuze: provide power over standby handler
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 2/3] ARM: i.MX: provide handler for power off over standby
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 1/3] ARM: riotboard: provide standby on power off option
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] gpio: fix null pointer exception when there is no oftree
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v1 00/10] video: tc358767: fixes and improvements
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: imx: use register defines in imxcfg files instead of plain numbers
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: imx: use register defines in imxcfg files instead of plain numbers
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: imx: use register defines in imxcfg files instead of plain numbers
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 2/8] common: efi: do not use undefined kconfig option
  • From: Michael Olbrich <m.olbrich@xxxxxxxxxxxxxx>
• [PATCH 5/5] pm9261: move reset vector to board code
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 4/5] at91sam9261ek, at91sam9g10ek: move reset vector to board code
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 3/5] at91sam9263ek: move reset vector to board code
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 2/5] at91: drop unused at91sam9x5_lowlevel_init.c
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 1/5] at91: refactor lowlevel_init selection
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [RFC PATCH 0/5] at91: move reset vector to board code
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH] ARM: imx: use register defines in imxcfg files instead of plain numbers
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 3/3] arm: at91 bootstrap: declare local function static
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 2/3] gpio: fix null pointer exception when there is no oftree
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 1/3] clk: fix clk_get error handling
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH v2 0/3] diverse at91 related fixes
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH] gpiolib: fix: do not access oftree on non-OFDEVICE boards
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH v1 10/10] video: tc358767: accept any hsync and vsync polatiry
  • From: Andrey Gusakov <andrey.gusakov@xxxxxxxxxxxxxxxxxx>
• [PATCH v1 08/10] video: tc358767: optimize DPCD register write
  • From: Andrey Gusakov <andrey.gusakov@xxxxxxxxxxxxxxxxxx>
• [PATCH v1 09/10] video: tc358767: filter out modes with too high pixelclock
  • From: Andrey Gusakov <andrey.gusakov@xxxxxxxxxxxxxxxxxx>
• [PATCH v1 06/10] video: tc358767: support newer DPCD revisions and higher data rates
  • From: Andrey Gusakov <andrey.gusakov@xxxxxxxxxxxxxxxxxx>
• [PATCH v1 03/10] video: tc358767: fix timing calculation
  • From: Andrey Gusakov <andrey.gusakov@xxxxxxxxxxxxxxxxxx>
• [PATCH v1 04/10] video: tc358767: fix AUXDATAn registers access during write
  • From: Andrey Gusakov <andrey.gusakov@xxxxxxxxxxxxxxxxxx>
• [PATCH v1 07/10] video: tc358767: optimize aux i2c bus checks
  • From: Andrey Gusakov <andrey.gusakov@xxxxxxxxxxxxxxxxxx>
• [PATCH v1 02/10] video: tc358767: fix DP0_MISC register set
  • From: Andrey Gusakov <andrey.gusakov@xxxxxxxxxxxxxxxxxx>
• [PATCH v1 05/10] video: tc358767: do not fail if sink supports more than 2 lanes
  • From: Andrey Gusakov <andrey.gusakov@xxxxxxxxxxxxxxxxxx>
• [PATCH v1 01/10] video: tc358767: fix EDID read for DP displays
  • From: Andrey Gusakov <andrey.gusakov@xxxxxxxxxxxxxxxxxx>
• [PATCH v1 00/10] video: tc358767: fixes and improvements
  • From: Andrey Gusakov <andrey.gusakov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] update snvs_lpgpr driver
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] mmc: Consistently use EXT_CSD_* names from eMMC 5.1 spec
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH] readlink: Improve -f handling
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] nvmem: snvs_lpgpr: sync with latest version for kernel
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] dts: arm: imx6qdl: provide snvs-lpgpr device
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] update snvs_lpgpr driver
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• RE: Earliest possible GPIO toggle on i.mx6
  • From: Mayur Nande <Mayur.Nande@xxxxxxxxx>
• Re: Earliest possible GPIO toggle on i.mx6
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Earliest possible GPIO toggle on i.mx6
  • From: Mayur Nande <Mayur.Nande@xxxxxxxxx>
• Re: [PATCH 6/8] efi: efi: load state from devicetree
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Bootchooser - remaining_attempts
  • From: Çağlar Kilimci <ckilimci@xxxxxxxxx>
• Re: [PATCH 2/8] common: efi: do not use undefined kconfig option
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 6/8] efi: efi: load state from devicetree
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 8/8] efi: efi: register barebox-update handler
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 1/8] state: fix compile warnings for dev_err expansion
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 2/8] common: efi: do not use undefined kconfig option
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 3/8] fs: efi: return with correct error code in efifs_stat
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 5/8] of: of_path: find device via partuuid
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 7/8] blspec: skip all devicetree tests if entry doesn't specify one
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 4/8] devfs-core: add function to find cdev by partuuid
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: v2017.07.0
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• Re: [PATCH v1 1/2] nvmem: snvs_lpgpr: sync with latest version for kernel
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] dts: arm: imx6qdl: provide snvs-lpgpr device
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH v1 1/2] nvmem: snvs_lpgpr: sync with latest version for kernel
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 2/2] dts: arm: imx6qdl: provide snvs-lpgpr device
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: v2017.07.0
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH] gpiolib: fix: do not access oftree on non-OFDEVICE boards
  • From: Alexander Kurz <akurz@xxxxxxxx>
• Re: [PATCH 1/2] clk: fix clk_get error handling
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 1/2] clk: fix clk_get error handling
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: Observations with AT91SAM9263-EK
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 2/2] gpio: fix null pointer exception when there is no oftree
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH 1/2] clk: fix clk_get error handling
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: Observations with AT91SAM9263-EK
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• Observations with AT91SAM9263-EK
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH] readlink: Improve -f handling
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• Barebox Environment and State placed on eMMC boot partition
  • From: Martin Hollingsworth <Martin.Hollingsworth@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] gpiolib: fix: do not access oftree on non-OFDEVICE boards
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 0/8] video: tc358767: fixes and improvements
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 6/8] video: tc358767: fix AUXDATAn registers access
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 5/8] video: tc358767: fix timing calculation
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] Revert "param: fix stub prototype of dev_add_param"
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] gpiolib: fix: do not access oftree on non-OFDEVICE boards
  • From: Alexander Kurz <akurz@xxxxxxxx>
• Re: [BUG v2017.07.0] readlink -f command broken?
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: imx: add support for Udoo Neo full
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [BUG v2017.07.0] readlink -f command broken?
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• [BUG v2017.07.0] readlink -f command broken?
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• v2017.07.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 8/8] video: tc358767: accept any hsync and vsync polatiry
  • From: Andrey Gusakov <andrey.gusakov@xxxxxxxxxxxxxxxxxx>
• [PATCH 7/8] video: tc358767: filter out modes with too high pixelclock
  • From: Andrey Gusakov <andrey.gusakov@xxxxxxxxxxxxxxxxxx>
• [PATCH 5/8] video: tc358767: fix timing calculation
  • From: Andrey Gusakov <andrey.gusakov@xxxxxxxxxxxxxxxxxx>
• [PATCH 6/8] video: tc358767: fix AUXDATAn registers access
  • From: Andrey Gusakov <andrey.gusakov@xxxxxxxxxxxxxxxxxx>
• [PATCH 4/8] video: tc358767: fix DP0_MISC register set
  • From: Andrey Gusakov <andrey.gusakov@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/8] video: tc358767: fix EDID read for DP displays
  • From: Andrey Gusakov <andrey.gusakov@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/8] video: tc358767: support newer DPCD revisions and higher data rates
  • From: Andrey Gusakov <andrey.gusakov@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/8] video: tc358767: do not fail if sink supports more than 2 lanes
  • From: Andrey Gusakov <andrey.gusakov@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/8] video: tc358767: fixes and improvements
  • From: Andrey Gusakov <andrey.gusakov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] enable LFS support for host programs
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] scripts/kwboot: document -n option
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: socfpga: remove unused fpgaintf setup
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2] docs: mvebu: describe -n more accurately in the sphinx document
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/2] scripts/kwboot: document -n option
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: imx: add support for Udoo Neo full
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: imx: add support for Udoo Neo full
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH] ARM: socfpga: remove unused fpgaintf setup
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: arria10_init_emac() bug?
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: imx: add support for Udoo Neo full
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v6] arm: boards: phytec-som-am335x: Update boot scripts
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Fwd: Barebox 2017.02 works great but no Linux Framebuffer... :-/
  • From: gianluca <gianlucarenzi@xxxxxxxxxxxxxxxxxxx>
• [PATCH] enable LFS support for host programs
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: Fwd: Barebox 2017.02 works great but no Linux Framebuffer... :-/
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: Fwd: Barebox 2017.02 works great but no Linux Framebuffer... :-/
  • From: gianluca <gianlucarenzi@xxxxxxxxxxxxxxxxxxx>
• arria10_init_emac() bug?
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• Re: [PATCH] ARM: imx: add support for Udoo Neo full
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Stable Releases
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: imx: add support for Udoo Neo full
  • From: Stefan Lengfeld <contact@xxxxxxxxxxxxxxx>
• [PATCH] ARM: imx: add support for Udoo Neo full
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v5] arm: boards: phytec-som-am335x: Update boot scripts
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v6] arm: boards: phytec-som-am335x: Update boot scripts
  • From: Daniel Schultz <d.schultz@xxxxxxxxx>
• [PATCH] fs: Make locally used function canonicalize_dir() static
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: omap: Fix error printing
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: omap: phytec-phycore-omap4460: Fix compiler warning
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] defaultenv: bin: init: Add sourcing of config-expansions
  • From: Daniel Schultz <d.schultz@xxxxxxxxx>
• Re: [PATCH v5] arm: boards: phytec-som-am335x: Update boot scripts
  • From: Daniel Schultz <d.schultz@xxxxxxxxx>
• [PATCH] pinctrl: at91: Bail out if atmel, pins property does not exist
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: i.MX6: fix usdhc3 pinmuxing on tqma6x
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [DT-UTILS PATCH 1/2] common: Rename strlcpy to DT_strlcpy
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Fwd: Barebox 2017.02 works great but no Linux Framebuffer... :-/
  • From: gianluca <gianlucarenzi@xxxxxxxxxxxxxxxxxxx>
• Re: Fwd: Barebox 2017.02 works great but no Linux Framebuffer... :-/
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: Fwd: Barebox 2017.02 works great but no Linux Framebuffer... :-/
  • From: gianluca <gianlucarenzi@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5] arm: boards: phytec-som-am335x: Update boot scripts
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] defaultenv: bin: init: Add sourcing of config-expansions
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: dts: i.MX6: fix usdhc3 pinmuxing on tqma6x
  • From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
• Re: [PATCH v2 00/16] RATP logic fixes and improvements
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] lib/fonts: add 6x8 font
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [DT-UTILS PATCH 2/2] common: Include sys/types.h header
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• [DT-UTILS PATCH 1/2] common: Rename strlcpy to DT_strlcpy
  • From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: Fwd: Barebox 2017.02 works great but no Linux Framebuffer... :-/
  • From: gianluca <gianlucarenzi@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 16/16] ratp: user close may happen in SYN-RECEIVED state
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH v2 14/16] ratp: don't ignore data that may arrive in behaviour H1
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH v2 13/16] ratp: send initial data in behaviour B if any pending
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH v2 15/16] ratp: consolidate setting the next AN or SN flags
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH v2 09/16] ratp: remove FIXME comment: FIN always requires ACK
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH v2 12/16] ratp: prefer using ratp_send_ack() in behaviour I1
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH v2 10/16] ratp: fix sending ACKs without data
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH v2 08/16] ratp: remove bogus data checks in behavior C2
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH v2 11/16] ratp: consolidate ratp_sn_expected() and ratp_an_expected()
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH v2 05/16] ratp: completely ignore RST flagged packets in behavior G
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH v2 06/16] ratp: fix data presence check
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH v2 07/16] ratp: fix single byte sending flagged with SO
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH v2 00/16] RATP logic fixes and improvements
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH v2 04/16] ratp: add missing RST flag in behavior G
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH v2 02/16] ratp: avoid unnecessary variable initializations
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH v2 01/16] ratp: add missing transition to SYN-RECEIVED in behavior B
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH v2 03/16] ratp: send missing RST in behavior C2
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• Re: Fwd: Barebox 2017.02 works great but no Linux Framebuffer... :-/
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: Fwd: Barebox 2017.02 works great but no Linux Framebuffer... :-/
  • From: gianluca <gianlucarenzi@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] lib/fonts: add 6x8 font
  • From: Roland Hieber <r.hieber@xxxxxxxxxxxxxx>
• [PATCH] lib/fonts: add 6x8 font
  • From: Bastian Stender <bst@xxxxxxxxxxxxxx>
• Re: Fwd: Barebox 2017.02 works great but no Linux Framebuffer... :-/
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: Fwd: Barebox 2017.02 works great but no Linux Framebuffer... :-/
  • From: gianluca <gianlucarenzi@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] Fix "i.MX: vf610: Ramp CPU clock to maximum frequency"
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Fwd: Barebox 2017.02 works great but no Linux Framebuffer... :-/
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] Fix "i.MX: vf610: Ramp CPU clock to maximum frequency"
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH] defaultenv: bin: init: Add sourcing of config-expansions
  • From: Daniel Schultz <d.schultz@xxxxxxxxx>
• [PATCH v5] arm: boards: phytec-som-am335x: Update boot scripts
  • From: Daniel Schultz <d.schultz@xxxxxxxxx>
• Re: [PATCH v4] arm: boards: phytec-som-am335x: Update boot scripts
  • From: Daniel Schultz <d.schultz@xxxxxxxxx>
• Re: [PATCH] ARM: Update zii_vf610_dev_defconfig
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/3] Fix "i.MX: vf610: Ramp CPU clock to maximum frequency"
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/6] Backport support for "extended device ID" for dataflash
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Fwd: Barebox 2017.02 works great but no Linux Framebuffer... :-/
  • From: gianluca <gianlucarenzi@xxxxxxxxxxxxxxxxxxx>
• [PATCH 6/6] mtd: dataflash: Add flash_info for AT45DB641E
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 5/6] mtd: dataflash: Make use of "extened device information"
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 3/6] mtd: dataflash: Replace pr_debug, printk with dev_* functions
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 4/6] mtd: dataflash: Get rid of loop counter in jedec_probe()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/6] mtd: dataflash: Replace C99 types with their kernel counterparts
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 0/6] Backport support for "extended device ID" for dataflash
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/6] mtd: dataflash: Improve coding style in jedec_probe()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/3] clk-vf610: Mark all of CCSR muxes with CLK_OPS_PARENT_ENABLE
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/3] i.MX: clk-pllv3: Do not touch PLL_BYPASS bit
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 3/3] i.MX: clk: Remove imx_clk_pllv3_locked()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 0/3] Fix "i.MX: vf610: Ramp CPU clock to maximum frequency"
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH] ARM: Update zii_vf610_dev_defconfig
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 00/16] RATP logic fixes and improvements
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 00/16] RATP logic fixes and improvements
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• Re: [PATCH] defaultenv: bin: init: Add sourcing of config-expansions
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v4] arm: boards: phytec-som-am335x: Update boot scripts
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 00/16] RATP logic fixes and improvements
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] serial: ns16550: emit an error message if getting the clock fails
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] scripts/kwbimage: support empty binary.0 files
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] of_device_is_stdout_path: simplify
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: spi-nor: sync definition of Spansion chips from Linux
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: mvebu: initial support for Armada 38x
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] clk: let clk_get return errors from of_clk_get_by_name
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] pci: mvebu: terminate error message with a newline
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• libratp, libratp-barebox and ratp-barebox-cli
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH 16/16] ratp: user close may happen in SYN-RECEIVED state
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH 15/16] ratp: consolidate setting the next AN or SN flags
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH 13/16] ratp: send initial data in behaviour B if any pending
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH 12/16] ratp: prefer using ratp_send_ack() in behaviour I1
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH 14/16] ratp: don't ignore data that may arrive in behaviour H1
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH 07/16] ratp: fix single byte sending flagged with SO
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH 09/16] ratp: remove FIXME comment: FIN always requires ACK
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH 10/16] ratp: fix sending ACKs without data
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH 11/16] ratp: consolidate ratp_sn_expected() and ratp_an_expected()
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH 08/16] ratp: remove bogus data checks in behavior C2
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH 06/16] ratp: fix data presence check
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH 02/16] ratp: avoid unnecessary variable initializations
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH 03/16] ratp: send missing RST in behavior C2
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH 05/16] ratp: completely ignore RST flagged packets in behavior G
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH 01/16] ratp: add missing transition to SYN-RECEIVED in behavior B
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH 04/16] ratp: add missing RST flag in behavior G
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• [PATCH 00/16] RATP logic fixes and improvements
  • From: Aleksander Morgado <aleksander@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] gpio: of: provide option generic property for initial line states
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• [PATCH v2 3/3] ARM: mvebu: Add initial support for Turris Omnia
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] gpio: of: provide option generic property for initial line states
  • From: Oleksij Rempel <ore@xxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: mvebu: Add initial support for Turris Omnia
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/3] clk: mvebu: Add support for Armada 38x's coreclk
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/3] ARM: mvebu: initial support for Armada 38x
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] mtd: spi-nor: sync definition of Spansion chips from Linux
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] of_device_is_stdout_path: split off options and support aliases
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] of_device_is_stdout_path: split off options and support aliases
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2] of_device_is_stdout_path: split off options and support aliases
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/2] of_device_is_stdout_path: simplify
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] ARM: Initial OP-TEE support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/8] Revert "nv: Fix setting of nv.dev.<devname>.<param> variables"
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 6/8] Revert "globalvar: make globalvar functions more consistent"
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/8] Revert "globalvar: don't use nv_device if CONFIG_NVVAR is disabled"
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/8] Revert "param: remove unnecessary device_d * argument"
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 8/8] Revert "nv: Do not create globalvars from nvvars"
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/8] Revert "globalvar: Fix value of new globalvar when nvvar exists"
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 7/8] Revert "globalvar: remove code for unqualified globalvars"
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/8] Revert "globalvar: make nv_device static"
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• revert nvvar changes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] scripts/kwbimage: support empty binary.0 files
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] serial: ns16550: emit an error message if getting the clock fails
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] clk: let clk_get return errors from of_clk_get_by_name
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] pci: mvebu: terminate error message with a newline
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: How to use eMMC/SD DOS partitions as backend for the state framework?
  • From: B Gol <behnam_golds@xxxxxxxxx>
• [PATCH] defaultenv: bin: init: Add sourcing of config-expansions
  • From: Daniel Schultz <d.schultz@xxxxxxxxx>