On Thu, Dec 15, 2011 at 09:58:28AM +0100, Alexander Aring wrote: > Support the setup of the mmc voltage, when booting OMAP4 with twl6030 > from nand. > > > +config MCI_OMAP_TWL6030_FIX > + bool "OMAP HSMMC TWL6030 FIX" > + depends on I2C_TWLCORE && MCI_OMAP_HSMMC && ARCH_OMAP4 > + help > + Enable TWL6030 support for mci device. OMAP4 Bootloader doesn't setup > + mmc voltage. So to setup mmc voltage you need to enable this. We do not need a config switch for this. Please instead of putting this into driver code just put all code in this patch into some function in arch/arm/mach-omap/omap4_twl6030_mmc.c which you then call from your board code. This may not be the cleanest way to do it but moving it into the mmc driver is not a good solution either. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
