On 15:52 Sat 17 Dec , Sascha Hauer wrote: > Traditionally U-Boot and barebox have the exception vectors at > the start of the binary. There is no real reason in doing so, > because in the majority of cases this data will not be at 0x0 > where it could be used as vectors directly anyway. > This patch puts the vectors into a separate linker section and > defines an head function which is placed at the start of the > image instead. Putting this in a separate function also has > the advantage that it can be placed at the start of images > which require an additional header like several Freescale i.MX > images. As the head function contains the barebox arm magic > those images can now also be detected aas barebox images. > > Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> > --- > arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c | 3 ++- > arch/arm/boards/eukrea_cpuimx35/flash_header.c | 3 ++- > arch/arm/boards/eukrea_cpuimx51/flash_header.c | 3 ++- > arch/arm/boards/freescale-mx25-3-stack/3stack.c | 3 ++- > .../boards/freescale-mx35-3-stack/flash_header.c | 3 ++- > arch/arm/boards/freescale-mx51-pdk/flash_header.c | 3 ++- > arch/arm/boards/freescale-mx53-loco/flash_header.c | 3 ++- > arch/arm/boards/freescale-mx53-smd/flash_header.c | 3 ++- > arch/arm/cpu/mmu.c | 4 ++-- > arch/arm/cpu/start.c | 14 +++++++------- > arch/arm/include/asm/barebox-arm-head.h | 17 +++++++++++++++++ > arch/arm/include/asm/barebox-arm.h | 2 ++ > arch/arm/lib/barebox.lds.S | 5 ++++- > 13 files changed, 48 insertions(+), 18 deletions(-) > create mode 100644 arch/arm/include/asm/barebox-arm-head.h you need to update the rm9200 too Best Regards, J. _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
