this is the "magic" setting which makes SDcard working on our board (which has external pull ups) Signed-off-by: Eric Bénard <eric@xxxxxxxxxx> --- arch/arm/mach-imx/include/mach/iomux-mx25.h | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-imx/include/mach/iomux-mx25.h b/arch/arm/mach-imx/include/mach/iomux-mx25.h index 58761b5..21a63ce 100644 --- a/arch/arm/mach-imx/include/mach/iomux-mx25.h +++ b/arch/arm/mach-imx/include/mach/iomux-mx25.h @@ -361,26 +361,26 @@ #define MX25_PAD_UART2_CTS__UART2_CTS IOMUX_PAD(0x384, 0x18c, 0x00, 0, 0, NO_PAD_CTRL) #define MX25_PAD_UART2_CTS__GPIO_4_29 IOMUX_PAD(0x384, 0x18c, 0x05, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x388, 0x190, 0x00, 0, 0, PAD_CTL_PUS_47K_UP) +#define MX25_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_SD1_CMD__FEC_RDATA2 IOMUX_PAD(0x388, 0x190, 0x02, 0x50c, 2, NO_PAD_CTRL) #define MX25_PAD_SD1_CMD__GPIO_2_23 IOMUX_PAD(0x388, 0x190, 0x05, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x38c, 0x194, 0x00, 0, 0, PAD_CTL_PUS_47K_UP) +#define MX25_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_SD1_CLK__FEC_RDATA3 IOMUX_PAD(0x38c, 0x194, 0x02, 0x510, 2, NO_PAD_CTRL) #define MX25_PAD_SD1_CLK__GPIO_2_24 IOMUX_PAD(0x38c, 0x194, 0x05, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x390, 0x198, 0x00, 0, 0, PAD_CTL_PUS_47K_UP) +#define MX25_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_SD1_DATA0__GPIO_2_25 IOMUX_PAD(0x390, 0x198, 0x05, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x394, 0x19c, 0x00, 0, 0, PAD_CTL_PUS_47K_UP) +#define MX25_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x394, 0x19c, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_SD1_DATA1__AUD7_RXD IOMUX_PAD(0x394, 0x19c, 0x03, 0x478, 0, NO_PAD_CTRL) #define MX25_PAD_SD1_DATA1__GPIO_2_26 IOMUX_PAD(0x394, 0x19c, 0x05, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x398, 0x1a0, 0x00, 0, 0, PAD_CTL_PUS_47K_UP) +#define MX25_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_SD1_DATA2__FEC_RX_CLK IOMUX_PAD(0x398, 0x1a0, 0x05, 0x514, 2, NO_PAD_CTRL) #define MX25_PAD_SD1_DATA2__GPIO_2_27 IOMUX_PAD(0x398, 0x1a0, 0x05, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x39c, 0x1a4, 0x00, 0, 0, PAD_CTL_PUS_47K_UP) +#define MX25_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, NO_PAD_CTRL) #define MX25_PAD_SD1_DATA3__FEC_CRS IOMUX_PAD(0x39c, 0x1a4, 0x00, 0x508, 2, NO_PAD_CTRL) #define MX25_PAD_SD1_DATA3__GPIO_2_28 IOMUX_PAD(0x39c, 0x1a4, 0x05, 0, 0, NO_PAD_CTRL) -- 1.7.6.4 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
