U-Boot V2 Development (Barebox)

• Date Index

• Re: [PATCH] of: base: add chosen node if it does not exist when adding initrd, (continued)
  • Re: [PATCH] of: base: add chosen node if it does not exist when adding initrd, Sascha Hauer
    • Re: [PATCH] of: base: add chosen node if it does not exist when adding initrd, Jan Lübbe
      • Re: [PATCH] of: base: add chosen node if it does not exist when adding initrd, Sascha Hauer
• [PATCH] spi: mvebu: only read from bus when data is needed, Uwe Kleine-König
  • Re: [PATCH] spi: mvebu: only read from bus when data is needed, Uwe Kleine-König
    • Re: [PATCH] spi: mvebu: only read from bus when data is needed, Sascha Hauer
• [PATCH 1/3] spi: mvebu: fix register macros for Armada 370/XP clock divider, Uwe Kleine-König
  • [PATCH 3/3] spi: mvebu: various non-critical improvements to armada_370_xp_spi_set_baudrate, Uwe Kleine-König
  • [PATCH 2/3] spi: mvebu: make sure the value calculated for PSCL is also used, Uwe Kleine-König
  • Re: [PATCH 1/3] spi: mvebu: fix register macros for Armada 370/XP clock divider, Sascha Hauer
    • Re: [PATCH 1/3] spi: mvebu: fix register macros for Armada 370/XP clock divider, Uwe Kleine-König
      • Re: [PATCH 1/3] spi: mvebu: fix register macros for Armada 370/XP clock divider, Sascha Hauer
• AM335x Porting Questions, Jonathan Stackhouse
  • Re: AM335x Porting Questions, Ian Abbott
    • RE: AM335x Porting Questions, Jonathan Stackhouse
      • Re: AM335x Porting Questions, Yegor Yefremov
• [PATCH] spi: mvebu: fix baudrate selection for Armada 370/XP, Uwe Kleine-König
  • Re: [PATCH] spi: mvebu: fix baudrate selection for Armada 370/XP, Sascha Hauer
• [PATCH 00/16] Vybrid related patches, Andrey Smirnov
  • [PATCH 01/16] i.MX: esdhc: Enable host->clk during initialization, Andrey Smirnov
  • [PATCH 04/16] i.MX: ocotp: Initialize 'sense_enable' to true on Vybrid, Andrey Smirnov
  • [PATCH 07/16] i.MX: iomuxv3: Add low-level pad code to headers, Andrey Smirnov
  • [PATCH 02/16] i.MX: ocotp: Add provisions for storing multiple MAC addresses, Andrey Smirnov
    • Re: [PATCH 02/16] i.MX: ocotp: Add provisions for storing multiple MAC addresses, Stefan Lengfeld
      • Re: [PATCH 02/16] i.MX: ocotp: Add provisions for storing multiple MAC addresses, Andrey Smirnov
        • Re: [PATCH 02/16] i.MX: ocotp: Add provisions for storing multiple MAC addresses, Stefan Lengfeld
          • Re: [PATCH 02/16] i.MX: ocotp: Add provisions for storing multiple MAC addresses, Sascha Hauer
            • Re: [PATCH 02/16] i.MX: ocotp: Add provisions for storing multiple MAC addresses, Andrey Smirnov
              • Re: [PATCH 02/16] i.MX: ocotp: Add provisions for storing multiple MAC addresses, Sascha Hauer
          • Re: [PATCH 02/16] i.MX: ocotp: Add provisions for storing multiple MAC addresses, Andrey Smirnov
  • [PATCH 05/16] i.MX: clk: Add IMX_PLLV3_SYS_VF610 subtype, Andrey Smirnov
  • [PATCH 11/16] i.MX: iomuxv3: Use helper functions in iomux-v3.h, Andrey Smirnov
  • [PATCH 09/16] i.MX: iomuxv3: Add low-level pad configuration routine, Andrey Smirnov
  • [PATCH 06/16] i.MX: vf610: Ramp CPU clock to maximum frequency, Andrey Smirnov
    • Re: [PATCH 06/16] i.MX: vf610: Ramp CPU clock to maximum frequency, Sascha Hauer
      • Re: [PATCH 06/16] i.MX: vf610: Ramp CPU clock to maximum frequency, Andrey Smirnov
  • [PATCH 03/16] i.MX: ocotp: Initialize OCOTP as early as possible, Andrey Smirnov
  • [PATCH 13/16] i.MX: iomux-vf610: Add missing pad definitions, Andrey Smirnov
  • [PATCH 10/16] i.MX6: sabresd: Remove magic numbers in setup_uart, Andrey Smirnov
  • [PATCH 08/16] i.MX: iomuxv3: Add helper type to deconstruct iomux_v3_cfg_t values, Andrey Smirnov
  • [PATCH 15/16] i.MX: Default CONFI_USB_IMX_PHY to 'y' on Vybrid, Andrey Smirnov
  • [PATCH 12/16] i.MX: vf610: Add low-level pin configuration helper, Andrey Smirnov
  • [PATCH 14/16] i.MX: imx-usb-phy: Add VF610 OF compatiblity string, Andrey Smirnov
  • [PATCH 16/16] i.MX: imx-usb-misc: Add Vybrid support, Andrey Smirnov
• [PATCH] spi: mvebu: fix error handling for transfer problems, Uwe Kleine-König
  • Re: [PATCH] spi: mvebu: fix error handling for transfer problems, Sascha Hauer
• [RFC v2 0/8] MIPS: use kexec to load ELF linux images, Antony Pavlov
  • [RFC v2 1/8] MIPS: add virt_to_phys() and phys_to_virt(), Antony Pavlov
  • [RFC v2 2/8] MIPS: c-r4k: add support for secondary cache, Antony Pavlov
  • [RFC v2 8/8] MIPS: malta: enable kexec, Antony Pavlov
  • [RFC v2 6/8] bootm: add kexec ELF support, Antony Pavlov
    • Re: [RFC v2 6/8] bootm: add kexec ELF support, Sascha Hauer
      • Re: [RFC v2 6/8] bootm: add kexec ELF support, Antony Pavlov
  • [RFC v2 5/8] filetype: add ELF type, Antony Pavlov
  • [RFC v2 3/8] resource: add create_resource() helper function, Antony Pavlov
  • [RFC v2 7/8] MIPS: add kexec ELF loading support, Antony Pavlov
  • [RFC v2 4/8] import initial kexec stuff, Antony Pavlov
    • Re: [RFC v2 4/8] import initial kexec stuff, Sascha Hauer
      • Re: [RFC v2 4/8] import initial kexec stuff, Antony Pavlov
• [PATCH] MIPS: qemu-malta_defconfig: set MAX_IMAGE_SIZE = 4 MiB, Antony Pavlov
  • Re: [PATCH] MIPS: qemu-malta_defconfig: set MAX_IMAGE_SIZE = 4 MiB, Sascha Hauer
• Cadence QSPI xload boot timing issue, Ian Abbott
• black screen with blinking cursor, irlinuxbox
• [PATCH] bootm: dont use internal oftree fallback by default, Alexander Kurz
  • Re: [PATCH] bootm: dont use internal oftree fallback by default, Lucas Stach
    • Re: [PATCH] bootm: dont use internal oftree fallback by default, Uwe Kleine-König
      • Re: [PATCH] bootm: dont use internal oftree fallback by default, Alexander Kurz
    • Re: [PATCH] bootm: dont use internal oftree fallback by default, Alexander Kurz
• [PATCH] x86: update boot message "UBOOT2" to "BAREBOX", Ulrich Ölmann
  • Re: [PATCH] x86: update boot message "UBOOT2" to "BAREBOX", Sascha Hauer
• help-UBOOT2 JMP, irlinuxbox
  • Re: help-UBOOT2 JMP, Ulrich Ölmann
  • <Possible follow-ups>
  • Re: help-UBOOT2 JMP, irlinuxbox
• [PATCH 1/3] arm: imx6: ocotp: Added support for the i.MX6UL, Daniel Schultz
  • [PATCH 2/3] arm: imx6: ocotp: Added write check, Daniel Schultz
  • [PATCH 3/3] arm: dts: Added ocotp support for i.MX6UL, Daniel Schultz
    • Re: [PATCH 3/3] arm: dts: Added ocotp support for i.MX6UL, Andrey Smirnov
      • Re: [PATCH 3/3] arm: dts: Added ocotp support for i.MX6UL, Daniel Schultz
• [PATCH 1/3] ARM: imx: Add support for ZII RDU2 board, Lucas Stach
  • [PATCH 3/3] ARM: rdu2: bring board support in line with other boards, Lucas Stach
  • [PATCH 2/3] ARM: rdu2: support QP variant, Lucas Stach
• [PATCH 1/2] imx6qdl-phytec-phycore-som.dtsi: rename eeprom, Stefan Lengfeld
  • [PATCH 2/2] Documentation: remote-control: fix markup, Stefan Lengfeld
  • Re: [PATCH 1/2] imx6qdl-phytec-phycore-som.dtsi: rename eeprom, Sascha Hauer
• UBIFS trouble, Juergen Borleis
  • Re: UBIFS trouble, Juergen Borleis
    • Re: UBIFS trouble, Sascha Hauer
• [PATCH 1/4] ARM i.MX: move cpu_type macros in front of cpu_revision code, Alexander Kurz
  • [PATCH 3/4] ARM: i.MX6SL: import clock infrastructure from linux, Alexander Kurz
  • [PATCH 4/4] ARM i.MX: Add i.MX6SL support, Alexander Kurz
  • [PATCH 2/4] ARM i.MX: add SoC type detection for i.MX6SL, Alexander Kurz
    • Re: [PATCH 2/4] ARM i.MX: add SoC type detection for i.MX6SL, Sascha Hauer
      • Re: [PATCH 2/4] ARM i.MX: add SoC type detection for i.MX6SL, Alexander Kurz
• [PATCH 1/3] ARM: dts: phycore-imx6: refactor fec nodes, Stefan Lengfeld
  • [PATCH 2/3] ARM: dts: phycore-imx6: fix missing ?xc-skew-ps settings for ethphy, Stefan Lengfeld
  • [PATCH 3/3] ARM: dts: phycore-imx6: remove unnecessary include, Stefan Lengfeld
  • Re: [PATCH 1/3] ARM: dts: phycore-imx6: refactor fec nodes, Sascha Hauer
• [PATCH 1/2] fixup! gpio: Add GPIO driver for Vybrid, Andrey Smirnov
  • [PATCH 2/2] fixup! i.MX: Add VF610 clock tree initialization code, Andrey Smirnov
  • Re: [PATCH 1/2] fixup! gpio: Add GPIO driver for Vybrid, Sascha Hauer
• [PATCH 0/6] ubi: remove character device flag from static volumes, Teresa Remmet
  • [PATCH 4/6] fs: Remove O_TRUNC check for devices when open files, Teresa Remmet
  • [PATCH 1/6] libfile: copy_file: Only open regular files with O_TRUNC, Teresa Remmet
  • [PATCH 5/6] commands: ubi: ubiupdatevol: Open device with O_TRUNC, Teresa Remmet
  • [PATCH 3/6] ubi: Add truncate callback, Teresa Remmet
  • [PATCH 2/6] devfs: Add optional truncate callback for device files, Teresa Remmet
  • [PATCH 6/6] ubi: barebox: Remove character device flag from static volumes, Teresa Remmet
  • Re: [PATCH 0/6] ubi: remove character device flag from static volumes, Sascha Hauer
• [PATCH] mtd: m25p80: add support for Everspin MR25H40, Uwe Kleine-König
  • Re: [PATCH] mtd: m25p80: add support for Everspin MR25H40, Sascha Hauer
• [PATCH 01/10] ARM: socfpga: fix compiler warning, Sascha Hauer
  • [PATCH 07/10] ARM: socfpga: fix compiler warning, Sascha Hauer
  • [PATCH 04/10] globalvar: Fix compiler warning, Sascha Hauer
  • [PATCH 06/10] mtd: peb: Fix format specifier, Sascha Hauer
  • [PATCH 05/10] mtd: peb: fix usage of uninitialized variable, Sascha Hauer
  • [PATCH 10/10] arm: at91 bootstrap: Fix menu title, Sascha Hauer
  • [PATCH 09/10] menu: sanitize menu_add_title, Sascha Hauer
  • [PATCH 08/10] of: Use %pa to print resource_size_t type, Sascha Hauer
  • [PATCH 02/10] nios2: Fix out of tree build, Sascha Hauer
  • [PATCH 03/10] nios2: Fix compiler warning, Sascha Hauer
• [PATCH] environment: fix typo, Ulrich Ölmann
  • Re: [PATCH] environment: fix typo, Sascha Hauer
• [PATCH 1/3] input: Fix compiler warning, Sascha Hauer
  • [PATCH 2/3] globalvar: Make locally used function static, Sascha Hauer
  • [PATCH 3/3] lib/int_sqrt.c: Fix compiler warning, Sascha Hauer
• [PATCH] Documentation: bootchooser: fix typos, Ulrich Ölmann
  • Re: [PATCH] Documentation: bootchooser: fix typos, Sascha Hauer
• [PATCH] ubi: Only read necessary size when reading the VID header, Ulrich Ölmann
  • Re: [PATCH] ubi: Only read necessary size when reading the VID header, Sascha Hauer
• [PATCH] spi: i.MX: reset controller on init, Sascha Hauer
• [PATCHv2] ARM: i.MX25/35: Fix bootsource detection, Daniel Krüger
  • Re: [PATCHv2] ARM: i.MX25/35: Fix bootsource detection, Sascha Hauer
• [PATCH] ARM: i.MX25/35: Fix bootsource detection, Daniel Krüger
  • Re: [PATCH] ARM: i.MX25/35: Fix bootsource detection, Daniel Krüger
• [PATCH 1/2] scripts: imx imx-usb-loader: sort USB id list, Alexander Kurz
  • [PATCH 2/2] scripts: imx imx-usb-loader: add i.MX6SL support, Alexander Kurz
  • Re: [PATCH 1/2] scripts: imx imx-usb-loader: sort USB id list, Sascha Hauer
• [PATCH] docs: fix typos in memcmp help text, Moritz Warning
  • Re: [PATCH] docs: fix typos in memcmp help text, Sascha Hauer
• habv4 on imx6, Jan Remmet
  • Re: habv4 on imx6, Jan Remmet
• [PATCH 1/3] i2c: gpio: fix handling of return code of of_get_gpio, Uwe Kleine-König
  • [PATCH 3/3] i2c: algo-bit: remove prototype for non-existing function, Uwe Kleine-König
  • [PATCH 2/3] i2c: gpio: use dynamic bus number unconditionally, Uwe Kleine-König
  • Re: [PATCH 1/3] i2c: gpio: fix handling of return code of of_get_gpio, Sascha Hauer
• [PATCH v2 1/4] scripts/kwbimage: fix handling of binary header, Uwe Kleine-König
  • [PATCH v2 4/4] scripts/kwbimage: allow to overwrite binary, Uwe Kleine-König
  • [PATCH v2 3/4] scripts/kwbimage: use ALIGN_SUP instead of open-coding it, Uwe Kleine-König
  • [PATCH v2 2/4] scripts/kwbimage: fix typo, Uwe Kleine-König
  • Re: [PATCH v2 1/4] scripts/kwbimage: fix handling of binary header, Sascha Hauer
• [PATCH 1/3] scripts/kwbimage: fix typo, Uwe Kleine-König
  • [PATCH 2/3] scripts/kwbimage: use ALIGN_SUP instead of open-coding it, Uwe Kleine-König
  • [PATCH 3/3] scripts/kwbimage: fix handling of binary header, Uwe Kleine-König
• [PATCH 1/2] fixup! pinctrl: Add provisions to control GPIO pin direction, Andrey Smirnov
  • [PATCH 2/2] fixup! clk: Port of_clk_set_defaults(), Andrey Smirnov
  • Re: [PATCH 1/2] fixup! pinctrl: Add provisions to control GPIO pin direction, Sascha Hauer
• [PATCH] i2c-mux-pca954x: Add code to control reset line, Andrey Smirnov
  • Re: [PATCH] i2c-mux-pca954x: Add code to control reset line, Sascha Hauer
• [PATCH] commands: i2c: Listen for CTRL-C when probing, Andrey Smirnov
  • Re: [PATCH] commands: i2c: Listen for CTRL-C when probing, Sascha Hauer
• [PATCH] ARM: i.MX: Add src fixup, Sascha Hauer
  • Message not available
    • Re: [PATCH] ARM: i.MX: Add src fixup, Sascha Hauer
• [PATCH] state: Documentation updates, Sascha Hauer
• [PATCH 1/2] regmap: Add regmap_write_bits() function, Andrey Smirnov
  • [PATCH 2/2] gpio: Port SX150x driver from Linux, Andrey Smirnov
  • Re: [PATCH 1/2] regmap: Add regmap_write_bits() function, Sascha Hauer
• usb otg port not working on an imx25 soc, iw3gtf
  • Re: usb otg port not working on an imx25 soc, Sascha Hauer
• [PATCH] pcm049: Add 1 GByte RAM with DUAL DIE Single Rank, Maik Otto
  • Re: [PATCH] pcm049: Add 1 GByte RAM with DUAL DIE Single Rank, Sascha Hauer
• [RFCv2 0/2] add initial RISC-V architecture support, Antony Pavlov
  • [RFCv2 1/2] serial: add driver for SiFive UART, Antony Pavlov
    • Re: [RFCv2 1/2] serial: add driver for SiFive UART, Sascha Hauer
      • Re: [RFCv2 1/2] serial: add driver for SiFive UART, Antony Pavlov
  • [RFCv2 2/2] add initial RISC-V architecture support, Antony Pavlov
• Compiler issues, Jose Luis Zabalza
  • Message not available
    • Re: Compiler issues, Jose Luis Zabalza
      • Re: Compiler issues, Andrey Smirnov
• v2016.11.0, Sascha Hauer
  • Re: v2016.11.0, Ian Abbott
    • Re: v2016.11.0, Sascha Hauer
• [PATCH v2 00/28] Vybrid support in Barebox, Andrey Smirnov
  • [PATCH v2 06/28] pinctrl: Add provisions to control GPIO pin direction, Andrey Smirnov
  • [PATCH v2 01/28] i.MX: Add primitive functions for VF610 family, Andrey Smirnov
  • [PATCH v2 09/28] clk: Port of_clk_set_defaults(), Andrey Smirnov
    • Re: [PATCH v2 09/28] clk: Port of_clk_set_defaults(), Sascha Hauer
  • [PATCH v2 05/28] i.MX: Add support for VF610 Tower board, Andrey Smirnov
  • [PATCH v2 03/28] i.MX: Add DEBUG_LL hooks for VF610, Andrey Smirnov
  • [PATCH v2 04/28] i.MX: scripts: Add "vf610" soc to imx-image, Andrey Smirnov
  • [PATCH v2 11/28] i.MX: clk: Port imx_clk_gate2_cgr(), Andrey Smirnov
  • [PATCH v2 08/28] clk: Port clock dependency resolution code, Andrey Smirnov
  • [PATCH v2 14/28] i.MX: clk: Port imx_clk_mux_flags from Linux, Andrey Smirnov
  • [PATCH v2 12/28] i.MX: clk: Add IMX_PLLV3_USB_VF610 support, Andrey Smirnov
  • [PATCH v2 13/28] i.MX: clk: Port imx_check_clocks(), Andrey Smirnov
  • [PATCH v2 02/28] i.MX: Add register definitions for VF610 SoC, Andrey Smirnov
  • [PATCH v2 16/28] vf610: Give enet_osc explicit "enet_ext" name, Andrey Smirnov
  • [PATCH v2 17/28] i.MX: Add 'lpuart' serial driver, Andrey Smirnov
  • [PATCH v2 27/28] i.MX: fec: Add support for Vybrid variant, Andrey Smirnov
  • [PATCH v2 20/28] i.MX: esdhc: Do not rely on CPU type for quirks, Andrey Smirnov
  • [PATCH v2 22/28] i.MX: Kconfig: Enable OCOTP on Vybrid, Andrey Smirnov
  • [PATCH v2 18/28] i.MX: i2c: Use read/write adapter functions, Andrey Smirnov
  • [PATCH v2 21/28] i.MX: esdhc: Request "per" clock explicitly, Andrey Smirnov
  • [PATCH v2 19/28] i.MX: i2c: Add Vybrid support, Andrey Smirnov
  • [PATCH v2 25/28] i.MX: ocotp: Add Vybrid support, Andrey Smirnov
  • [PATCH v2 26/28] i.MX: fec: Enable all clocks specified for FEC, Andrey Smirnov
  • [PATCH v2 23/28] i.MX: ocotp: Remove unused #define, Andrey Smirnov
  • [PATCH v2 24/28] i.MX: ocotp: Account for shadow memory gaps, Andrey Smirnov
  • [PATCH v2 28/28] gpio: Add GPIO driver for Vybrid, Andrey Smirnov
  • [PATCH v2 15/28] i.MX: Add VF610 clock tree initialization code, Andrey Smirnov
  • [PATCH v2 10/28] i.MX: Move clk code from 'mach-imx' to 'drivers', Andrey Smirnov
  • [PATCH v2 07/28] i.MX: Add pinctrl driver for VF610, Andrey Smirnov
  • Re: [PATCH v2 00/28] Vybrid support in Barebox, Sascha Hauer
• [PATCH] clk: add clock command completion, Sascha Hauer
• i.MX6ul support, Sascha Hauer
  • [PATCH 1/7] ARM: i.MX: beginning i.MX6ul support, Sascha Hauer
  • [PATCH 6/7] ARM: i.MX: ocotp: Add i.MX6ul support, Sascha Hauer
  • [PATCH 5/7] serial: i.MX: Add i.MX6ul support, Sascha Hauer
  • [PATCH 3/7] ARM: i.MX6 gpt: Add i.MX6ul support, Sascha Hauer
  • [PATCH 4/7] pinmux: imx-iomux-v3: Add i.MX6ul support, Sascha Hauer
  • [PATCH 2/7] ARM: i.MX6ul: Add clock support, Sascha Hauer
  • [PATCH 7/7] ARM: i.MX6 esdctl: Add i.MX6ul support, Sascha Hauer
• [PATCH] ARM: i.MX: OCOTP: Add functions to access fuses field wise, Sascha Hauer
• [PATCH] serial: i.MX uart: Allow DTE mode in lowlevel code, Sascha Hauer
• [PATCH 1/2] of: partitions: Support new binding, Sascha Hauer
  • [PATCH 2/2] of: of_find_path: Add support for new partition binding, Sascha Hauer
• [PATCH] net: phy: micrel: Do not overwrite reserved bits, Sascha Hauer
• [PATCH 0/4] net/designware: A few patches from U-Boot, Ian Abbott
  • [PATCH 1/4] net/designware: Consecutive writes to the same register to be avoided, Ian Abbott
  • [PATCH 2/4] net/designware: Do not select MIIPORT for RGMII interface, Ian Abbott
  • [PATCH 3/4] net: designware: Respect "bus mode" register contents on SW reset, Ian Abbott
  • [PATCH 4/4] net/designware: add explicit reset of {tx|rx}_currdescnum, Ian Abbott
  • Re: [PATCH 0/4] net/designware: A few patches from U-Boot, Sascha Hauer
    • Re: [PATCH 0/4] net/designware: A few patches from U-Boot, Ian Abbott
  • Re: [PATCH 0/4] net/designware: A few patches from U-Boot, Sascha Hauer
• Designware MAC reset timeout after Linux reboot, Ian Abbott
  • Re: Designware MAC reset timeout after Linux reboot, Sascha Hauer
    • Re: Designware MAC reset timeout after Linux reboot, Ian Abbott
      • Re: Designware MAC reset timeout after Linux reboot, Ian Abbott
  • Re: Designware MAC reset timeout after Linux reboot, Steffen Trumtrar
    • Re: Designware MAC reset timeout after Linux reboot, Ian Abbott
• [PATCH] commands: spi: fix chip select validation, Stefan Lengfeld
  • Re: [PATCH] commands: spi: fix chip select validation, Sascha Hauer
• [PATCH] command.h: drop unused Struct_Section attribute, Antony Pavlov
  • Re: [PATCH] command.h: drop unused Struct_Section attribute, Sascha Hauer
• [PATCH] MIPS: drop redundant start_barebox() declaration, Antony Pavlov
  • Re: [PATCH] MIPS: drop redundant start_barebox() declaration, Sascha Hauer
• Re: Fwd: boot kernel with append device tree, Sascha Hauer
  • Re: Fwd: boot kernel with append device tree, Alex Vazquez
    • Re: Fwd: boot kernel with append device tree, Sascha Hauer
      • Re: Fwd: boot kernel with append device tree, Alex Vazquez
        • Re: Fwd: boot kernel with append device tree, Sascha Hauer
          • Re: Fwd: boot kernel with append device tree, Alex Vazquez
• [PATCH] mfd: mc13892: more descriptive charger register defines, Alexander Kurz
  • Re: [PATCH] mfd: mc13892: more descriptive charger register defines, Sascha Hauer
• Configure RAM size on iMX53 board, Jose Luis Zabalza
  • Re: Configure RAM size on iMX53 board, Andrey Smirnov
  • Re: Configure RAM size on iMX53 board, Sascha Hauer
    • Re: Configure RAM size on iMX53 board, Jose Luis Zabalza
      • Re: Configure RAM size on iMX53 board, Sascha Hauer
        • Re: Configure RAM size on iMX53 board, Jose Luis Zabalza
          • Re: Configure RAM size on iMX53 board, Sascha Hauer
            • Re: Configure RAM size on iMX53 board, Jose Luis Zabalza
              • Re: Configure RAM size on iMX53 board, Sascha Hauer
                • Re: Configure RAM size on iMX53 board, Jose Luis Zabalza
                  • Re: Configure RAM size on iMX53 board, Sascha Hauer
• [PATCH] scripts imx-image: add DCD NOP command support, Alexander Kurz
  • Re: [PATCH] scripts imx-image: add DCD NOP command support, Sascha Hauer
• [PATCH] mtd: spi-nor: add MX25U2033E, Alexander Kurz
  • Re: [PATCH] mtd: spi-nor: add MX25U2033E, Sascha Hauer
• [PATCH upstream 1/4] state: use packet attribute for on storage structs, Stefan Lengfeld
  • [PATCH upstream 3/4] state: fix state is not saved when string variable is changed, Stefan Lengfeld
  • [PATCH upstream 2/4] state: fix indentation, Stefan Lengfeld
  • [PATCH upstream 4/4] docs: state: make string variable type clearer, Stefan Lengfeld
  • Re: [PATCH upstream 1/4] state: use packet attribute for on storage structs, Andrey Smirnov
  • Re: [PATCH upstream 1/4] state: use packet attribute for on storage structs, Sascha Hauer
    • Re: [PATCH upstream 1/4] state: use packet attribute for on storage structs, Stefan Lengfeld
• [PATCH 1/2] fixup! watchdog: add designware driver, Steffen Trumtrar
  • [PATCH 2/2] fixup! ARM: socfpga: dtsi: add dw-wdt reset lines, Steffen Trumtrar
  • Re: [PATCH 1/2] fixup! watchdog: add designware driver, Sascha Hauer
• [PATCH 1/5] PCI: add some useful debug output, Lucas Stach
  • [PATCH 2/5] PCI: only check specific flag for 64bit BAR, Lucas Stach
  • [PATCH 4/5] PCI: align BAR address to BAR size, Lucas Stach
  • [PATCH 5/5] PCI: split PCI hierarchy enumeration and config from device registration, Lucas Stach
  • [PATCH 3/5] PCI: align address range before scanning bridge, Lucas Stach
  • Re: [PATCH 1/5] PCI: add some useful debug output, Sascha Hauer
• [PATCH] net: e1000: set edev parent pointer, Lucas Stach
  • Re: [PATCH] net: e1000: set edev parent pointer, Sascha Hauer
• [PATCH] ARM: riotboard: fix barebox partition size, Lucas Stach
  • Re: [PATCH] ARM: riotboard: fix barebox partition size, Sascha Hauer
• [PATCH v2] net: e1000: fix i210 register remapping, Lucas Stach
  • Re: [PATCH v2] net: e1000: fix i210 register remapping, Andrey Smirnov
  • Re: [PATCH v2] net: e1000: fix i210 register remapping, Sascha Hauer
• [PATCH] net: e1000: fix i210 register remapping, Lucas Stach
• Read kernel from static UBI volume, Guillermo Rodriguez Garcia
  • Re: Read kernel from static UBI volume, Uwe Kleine-König
    • Re: Read kernel from static UBI volume, Guillermo Rodriguez Garcia
  • Re: Read kernel from static UBI volume, Sascha Hauer
    • Re: Read kernel from static UBI volume, Guillermo Rodriguez Garcia
      • Re: Read kernel from static UBI volume, Sascha Hauer
• [PATCH v2] ARM: dts: am33xx.dtsi: Add spi aliases, Teresa Remmet
  • Re: [PATCH v2] ARM: dts: am33xx.dtsi: Add spi aliases, Sascha Hauer
• [PATCH v2] squashfs additional decompressors, Sascha Hauer
  • [PATCH 6/6] fs: squashfs: Enable squashfs XZ support when XZ is enabled, Sascha Hauer
  • [PATCH 4/6] Add filetype and detection for squashfs images, Sascha Hauer
  • [PATCH 1/6] fs: squashfs: port lzo compression support from kernel, Sascha Hauer
  • [PATCH 5/6] fs: squashfs: append linux rootarg for ubi volume, Sascha Hauer
  • [PATCH 3/6] fs: squashfs: port zlib compression support from kernel, Sascha Hauer
  • [PATCH 2/6] fs: squashfs: port lz4 compression support from kernel, Sascha Hauer
• [PATCH 1/2] ARM: dts: am33xx: Make am33xx-strip.dtsi independent, Teresa Remmet
  • [PATCH 2/2] ARM: dts: am33xx.dtsi: Add spi aliases, Teresa Remmet
  • Re: [PATCH 1/2] ARM: dts: am33xx: Make am33xx-strip.dtsi independent, Teresa Remmet
• [PATCH 1/6] fs: squashfs: port lzo compression support from kernel, Sascha Hauer
  • [PATCH 5/6] fs: squashfs: append linux rootarg for ubi volume, Sascha Hauer
  • [PATCH 4/6] Add filetype and detection for squashfs images, Sascha Hauer
  • [PATCH 2/6] fs: squashfs: port lz4 compression support from kernel, Sascha Hauer
  • [PATCH 6/6] fs: squashfs: Do not default on xz, Sascha Hauer
    • Re: [PATCH 6/6] fs: squashfs: Do not default on xz, Daniel Krüger
      • Re: [PATCH 6/6] fs: squashfs: Do not default on xz, Sascha Hauer
  • [PATCH 3/6] fs: squashfs: port zlib compression support from kernel, Sascha Hauer
• [PATCH] pinctrl: mvebu: fix a comment about mv78460, Uwe Kleine-König
  • Re: [PATCH] pinctrl: mvebu: fix a comment about mv78460, Sascha Hauer
• [PATCH 1/2] nand: imx6: Changed default NAND clock, Christian Hemp
  • [PATCH 2/2] mtd: nand: nand_mxs: Fix readtotal calculation, Christian Hemp
    • Re: [PATCH 2/2] mtd: nand: nand_mxs: Fix readtotal calculation, Sascha Hauer
      • Re: [PATCH 2/2] mtd: nand: nand_mxs: Fix readtotal calculation, Stefan Lengfeld
  • Re: [PATCH 1/2] nand: imx6: Changed default NAND clock, Sascha Hauer
    • Re: [PATCH 1/2] nand: imx6: Changed default NAND clock, Stefan Lengfeld
  • Re: [PATCH 1/2] nand: imx6: Changed default NAND clock, Sascha Hauer
• [PATCH] arm: Baltos: don't invoke baltos_read_eeprom in MLO, yegorslists
  • Re: [PATCH] arm: Baltos: don't invoke baltos_read_eeprom in MLO, Sascha Hauer
• [PATCH 1/3] state: pass error code instead of inventing new one, Sascha Hauer
  • [PATCH 2/3] state: driver: handle EPROBE_DEFER, Sascha Hauer
  • [PATCH 3/3] of_path: handle no driver for device, Sascha Hauer
• [PATCH] mtd: ubi: enable thread earlier, Sascha Hauer
• [PATCH] sandbox: eliminate sdl_init(), Antony Pavlov
  • Re: [PATCH] sandbox: eliminate sdl_init(), Sascha Hauer
• [PATCH] spi: mvebu: make more than one device on a bus work, Uwe Kleine-König
  • Re: [PATCH] spi: mvebu: make more than one device on a bus work, Sascha Hauer
• [PATCH] mtd: Make UBI detection more robust, Sascha Hauer
• [PATCH 1/2] linux/list.h: Add missing include, Sascha Hauer
  • [PATCH 2/2] complete: Add completion for nv and globalvar commands, Sascha Hauer
• [PATCH] pinctrl: mvebu: sync mpp names to Linux 4.9-rc1, Uwe Kleine-König
  • Re: [PATCH] pinctrl: mvebu: sync mpp names to Linux 4.9-rc1, Sascha Hauer
    • [PATCH v2] pinctrl: mvebu: sync mpp names to Linux 4.9-rc1, Uwe Kleine-König
      • Re: [PATCH v2] pinctrl: mvebu: sync mpp names to Linux 4.9-rc1, Sascha Hauer
• [PATCH] arm: Baltos: setup MPU PLL to run at 600MHz, yegorslists
  • Re: [PATCH] arm: Baltos: setup MPU PLL to run at 600MHz, Sascha Hauer
• [PATCH] ARM: bootm: Fix free_mem calculation when initrd is given, Sascha Hauer
• [PATCH 0/4] Add support to modify mbr partition layout, Michael Grzeschik
  • [PATCH 2/4] cmdlinepart: add option to set DEVFS_PARTITION_IN_PT flag, Michael Grzeschik
  • [PATCH 4/4] mci: add MBR write and read function to block devices, Michael Grzeschik
    • Re: [PATCH 4/4] mci: add MBR write and read function to block devices, Sascha Hauer
      • Re: [PATCH 4/4] mci: add MBR write and read function to block devices, Michael Grzeschik
        • Re: [PATCH 4/4] mci: add MBR write and read function to block devices, Michael Grzeschik
  • [PATCH 1/4] partitions: add DEVFS_PARTITION_IN_PT flag, Michael Grzeschik
  • [PATCH 3/4] partitions/dos: add function to write partition table, Michael Grzeschik
    • Re: [PATCH 3/4] partitions/dos: add function to write partition table, Sascha Hauer
      • Re: [PATCH 3/4] partitions/dos: add function to write partition table, Michael Grzeschik
• [PATCH v3 1/3] reset: import socfpga-reset driver from linux, Steffen Trumtrar
  • [PATCH v3 3/3] ARM: socfpga: dtsi: add dw-wdt reset lines, Steffen Trumtrar
    • Re: [PATCH v3 3/3] ARM: socfpga: dtsi: add dw-wdt reset lines, Trent Piepho
      • Re: [PATCH v3 3/3] ARM: socfpga: dtsi: add dw-wdt reset lines, Steffen Trumtrar
        • Re: [PATCH v3 3/3] ARM: socfpga: dtsi: add dw-wdt reset lines, Sascha Hauer
  • [PATCH v3 2/3] watchdog: add designware driver, Steffen Trumtrar
    • Re: [PATCH v3 2/3] watchdog: add designware driver, Sascha Hauer
  • Re: [PATCH v3 1/3] reset: import socfpga-reset driver from linux, Sascha Hauer
• [PATCH] ARM: i.MX Freescale Sabrelite: Use correct device tree for dl variant, Sascha Hauer
• Loading kernel issues, Javier Fileiv
  • Re: Loading kernel issues, Sascha Hauer
  • Re: Loading kernel issues, Juergen Borleis
    • Re: Loading kernel issues, Javier Fileiv
      • Re: Loading kernel issues, Javier Fileiv
        • Re: Loading kernel issues, Juergen Borleis
          • Re: Loading kernel issues, Javier Fileiv
            • Re: Loading kernel issues, Javier Fileiv
              • Re: Loading kernel issues, Juergen Borleis
                • Re: Loading kernel issues, Javier Fileiv
                  • Re: Loading kernel issues, Javier Fileiv
                    • Re: Loading kernel issues, Juergen Borleis
                      • Re: Loading kernel issues, Javier Fileiv
                        • Re: Loading kernel issues, Juergen Borleis
                          • Re: Loading kernel issues, Javier Fileiv
                            • Re: Loading kernel issues, gianluca
                            • Re: Loading kernel issues, Juergen Borleis
                          • Re: Loading kernel issues, Sascha Hauer
                            • Re: Loading kernel issues, Javier Fileiv
• [PATCH v2 1/3] reset: import socfpga-reset driver from linux, Steffen Trumtrar
  • [PATCH v2 3/3] ARM: socfpga: dtsi: add dw-wdt reset lines, Steffen Trumtrar
  • [PATCH v2 2/3] watchdog: add designware driver, Steffen Trumtrar
    • Re: [PATCH v2 2/3] watchdog: add designware driver, Steffen Trumtrar
• How to configure and enable the barebox state?, Trostel Alain
  • Re: How to configure and enable the barebox state?, Sascha Hauer
• Compressed DTB - builtin DTB, Daniel Krüger
  • Re: Compressed DTB - builtin DTB, Sascha Hauer
    • Re: Compressed DTB - builtin DTB, Daniel Krüger
      • Re: Compressed DTB - builtin DTB, Sascha Hauer
• [RFC] add riscv support, Antony Pavlov
  • Re: [RFC] add riscv support, Robert Schwebel
• [PATCH] arch: refresh defconfigs, Sascha Hauer
• [PATCH] ubi: fix spelling, yegorslists
  • Re: [PATCH] ubi: fix spelling, Sascha Hauer
• [PATCH] sandbox: drop unused header files, Antony Pavlov
  • Re: [PATCH] sandbox: drop unused header files, Sascha Hauer
• [PATCH] mtd: ubi: Fix scrubbing during attach, Sascha Hauer
• [PATCH] boot: add '-w' parameter to usage help text, yegorslists
  • Re: [PATCH] boot: add '-w' parameter to usage help text, Sascha Hauer
• v2016.10.0, Sascha Hauer
• [PATCH 1/2] Allow device parameters for devices with dots in name, Sascha Hauer
  • [PATCH 2/2] completion: Fix completion for devices with a dot in the name, Sascha Hauer
• [PATCH v3] Add support for Baltos systems, yegorslists
  • Re: [PATCH v3] Add support for Baltos systems, Sascha Hauer
• am335x: memory configuration, Yegor Yefremov
  • Re: am335x: memory configuration, Jan Remmet
  • Message not available
    • Re: am335x: memory configuration, Yegor Yefremov
• why UBI static volumes are flagged as DEVFS_IS_CHARACTER_DEV, iw3gtf
  • Re: why UBI static volumes are flagged as DEVFS_IS_CHARACTER_DEV, Teresa Remmet
    • Re: why UBI static volumes are flagged as DEVFS_IS_CHARACTER_DEV, Sascha Hauer
      • Re: why UBI static volumes are flagged as DEVFS_IS_CHARACTER_DEV, Teresa Remmet
  • Aw: Re: why UBI static volumes are flagged as DEVFS_IS_CHARACTER_DEV, iw3gtf
• [PATCH 1/2] ARM: mvebu: add support for Netgear RN2120, Uwe Kleine-König
  • [PATCH 2/2] ARM: mvebu: document some general mvebu stuff and the rn2120 board, Uwe Kleine-König
  • Re: [PATCH 1/2] ARM: mvebu: add support for Netgear RN2120, Sascha Hauer
• [PATCH 0/5] Extend squashfs support, Enrico Jorns
  • [PATCH 1/5] fs: squashfs: port lzo compression support from kernel, Enrico Jorns
    • Re: [PATCH 1/5] fs: squashfs: port lzo compression support from kernel, Sascha Hauer
      • Re: [PATCH 1/5] fs: squashfs: port lzo compression support from kernel, Yegor Yefremov
  • [PATCH 5/5] fs: squashfs: append linux rootarg for ubi volume, Enrico Jorns
  • [PATCH 4/5] Add filetype and detection for squashfs images, Enrico Jorns
    • Re: [PATCH 4/5] Add filetype and detection for squashfs images, Yegor Yefremov
      • Re: [PATCH 4/5] Add filetype and detection for squashfs images, Enrico Joerns
        • Re: [PATCH 4/5] Add filetype and detection for squashfs images, Yegor Yefremov
  • [PATCH 3/5] fs: squashfs: port zlib compression support from kernel, Enrico Jorns
    • Re: [PATCH 3/5] fs: squashfs: port zlib compression support from kernel, Sascha Hauer
      • Re: [PATCH 3/5] fs: squashfs: port zlib compression support from kernel, Yegor Yefremov
        • Re: [PATCH 3/5] fs: squashfs: port zlib compression support from kernel, Sascha Hauer
  • [PATCH 2/5] fs: squashfs: port lz4 compression support from kernel, Enrico Jorns
• [PATCH] pinctrl: mvebu: armada-370 fix gpio name for mpp63, Uwe Kleine-König
  • Re: [PATCH] pinctrl: mvebu: armada-370 fix gpio name for mpp63, Sascha Hauer
• [PATCH 00/20] Vybrid support in Barebox, Andrey Smirnov
  • [PATCH 09/20] i.MX: clk: Add IMX_PLLV3_USB_VF610 support, Andrey Smirnov
  • [PATCH 10/20] i.MX: clk: Port imx_check_clocks() and imx_obtain_fixed_clock(), Andrey Smirnov
    • Re: [PATCH 10/20] i.MX: clk: Port imx_check_clocks() and imx_obtain_fixed_clock(), Sascha Hauer
      • Re: [PATCH 10/20] i.MX: clk: Port imx_check_clocks() and imx_obtain_fixed_clock(), Andrey Smirnov
        • Re: [PATCH 10/20] i.MX: clk: Port imx_check_clocks() and imx_obtain_fixed_clock(), Sascha Hauer
  • [PATCH 08/20] i.MX: clk: Port imx_clk_gate2_cgr(), Andrey Smirnov
  • [PATCH 12/20] vf610: Give enet_osc explicit "enet_ext" name, Andrey Smirnov
  • [PATCH 07/20] clk: Port of_clk_set_defautls(), Andrey Smirnov
    • Re: [PATCH 07/20] clk: Port of_clk_set_defautls(), Sascha Hauer
      • Re: [PATCH 07/20] clk: Port of_clk_set_defautls(), Andrey Smirnov
  • [PATCH 05/20] i.MX: Add pinctrl driver for VF610, Andrey Smirnov
  • [PATCH 02/20] i.MX: Add DEBUG_LL hooks for VF610, Andrey Smirnov
    • Re: [PATCH 02/20] i.MX: Add DEBUG_LL hooks for VF610, Sascha Hauer
      • Re: [PATCH 02/20] i.MX: Add DEBUG_LL hooks for VF610, Andrey Smirnov
  • [PATCH 13/20] i.MX: Add 'lpuart' serial driver, Andrey Smirnov
    • Re: [PATCH 13/20] i.MX: Add 'lpuart' serial driver, Sascha Hauer
      • Re: [PATCH 13/20] i.MX: Add 'lpuart' serial driver, Andrey Smirnov
        • Re: [PATCH 13/20] i.MX: Add 'lpuart' serial driver, Sascha Hauer
  • [PATCH 01/20] i.MX: Add primitive functions for VF610 family, Andrey Smirnov
  • [PATCH 03/20] i.MX: scripts: Add "vf610" soc to imx-image, Andrey Smirnov
  • [PATCH 15/20] i.MX: esdhc: Do not rely on CPU type for quirks, Andrey Smirnov
  • [PATCH 16/20] i.MX: Kconfig: Enable OCOTP on Vybrid, Andrey Smirnov
  • [PATCH 19/20] i.MX: ocotp: Add Vybrid support, Andrey Smirnov
  • [PATCH 06/20] clk: Port clock dependency resolution code, Andrey Smirnov
  • [PATCH 20/20] imx-esdhc: Request "per" clock explicitly, Andrey Smirnov
  • [PATCH 18/20] i.MX: ocotp: Account for shadow memory gaps, Andrey Smirnov
  • [PATCH 17/20] i.MX: ocotp: Remove unused #define, Andrey Smirnov
  • [PATCH 14/20] i.MX: i2c-imx: Add Vybrid support, Andrey Smirnov
    • Re: [PATCH 14/20] i.MX: i2c-imx: Add Vybrid support, Sascha Hauer
      • Re: [PATCH 14/20] i.MX: i2c-imx: Add Vybrid support, Andrey Smirnov
  • [PATCH 11/20] i.MX: Add VF610 clock tree initialization code, Andrey Smirnov
    • Re: [PATCH 11/20] i.MX: Add VF610 clock tree initialization code, Sascha Hauer
      • Re: [PATCH 11/20] i.MX: Add VF610 clock tree initialization code, Andrey Smirnov
  • [PATCH 04/20] i.MX: Add support for VF610 Tower board, Andrey Smirnov
    • Re: [PATCH 04/20] i.MX: Add support for VF610 Tower board, Sascha Hauer
      • Re: [PATCH 04/20] i.MX: Add support for VF610 Tower board, Andrey Smirnov
        • Re: [PATCH 04/20] i.MX: Add support for VF610 Tower board, Sascha Hauer
• [PATCH] sandbox: Makefile: drop unused SUBARCH stuff, Antony Pavlov
  • Re: [PATCH] sandbox: Makefile: drop unused SUBARCH stuff, Sascha Hauer
• [PATCH] net/phy: marvell: fix error handling, Uwe Kleine-König
  • Re: [PATCH] net/phy: marvell: fix error handling, Sascha Hauer
• [PATCH 0/2] H100 support, Lucas Stach
  • [PATCH 2/2] ARM: imx6: add support for Auvidea H100, Lucas Stach
  • [PATCH 1/2] ARM: microsom: use imx6q_barebox_entry, Lucas Stach
  • Re: [PATCH 0/2] H100 support, Sascha Hauer
• [PATCH 01/10] serial: arm_dcc: depend on !CPU_V8, Lucas Stach
  • [PATCH 03/10] video: tc358767: depend on EDID helpers, Lucas Stach
  • [PATCH 07/10] arm: semihosting support is not implemented for ARM64, Lucas Stach
  • [PATCH 04/10] arm64: select ARM_EXCEPTIONS, Lucas Stach
  • [PATCH 10/10] arm64: don't allow to build relocatable image, Lucas Stach
  • [PATCH 05/10] arm(64): move HAS_DMA and HAS_MODULES to CPU_32, Lucas Stach
  • [PATCH 09/10] arm64: drop unneeded files from Makefile, Lucas Stach
  • [PATCH 08/10] arm64: include correct setupc file in ARM64 PBL, Lucas Stach
  • [PATCH 06/10] arm(64): don't advertise stack_dumping capabilities for ARM64, Lucas Stach
  • [PATCH 02/10] mfd: syscon: drop EXPORT_SYMBOL for static function, Lucas Stach
  • Re: [PATCH 01/10] serial: arm_dcc: depend on !CPU_V8, Sascha Hauer
• [PATCH 1/2] i.MX: Introduce imx6_cpu_revision(), Andrey Smirnov
  • [PATCH 2/2] i.MX: Register imx6_fixup_cpus() for MX6Q+ as well, Andrey Smirnov
  • Re: [PATCH 1/2] i.MX: Introduce imx6_cpu_revision(), Sascha Hauer
• [PATCH 1/9] usb: Use standard debug macro, Sascha Hauer
  • [PATCH 9/9] usb: imx-us-phy: implement notify_(dis)concect, Sascha Hauer
  • [PATCH 4/9] usb: imx-usb-phy: Drop unnecessary read/modify/write, Sascha Hauer
  • [PATCH 6/9] phy: Introduce to_usbphy conversion function, Sascha Hauer
  • [PATCH 3/9] usb: ehci: forward phy given in registration data to host, Sascha Hauer
  • [PATCH 2/9] usb: Add usb phy to usb host, Sascha Hauer
  • [PATCH 8/9] usb: imx-us-phy: Convert driver to generic phy support, Sascha Hauer
  • [PATCH 5/9] phy: Introduce of_phy_get_by_phandle, Sascha Hauer
  • [PATCH 7/9] phy: Add usb-nop-xceiv support, Sascha Hauer
• [PATCH] pinctrl: mvebu: add newline to error message, Uwe Kleine-König
  • Re: [PATCH] pinctrl: mvebu: add newline to error message, Sascha Hauer
• [PATCH 0/7] scripts: kwboot: various improvements, Uwe Kleine-König
  • [PATCH 5/7] scripts: kwboot: simplify kwboot_mmap_image, Uwe Kleine-König
  • [PATCH 6/7] scripts: kwboot: set boot source to UART before sending, Uwe Kleine-König
  • [PATCH 7/7] images: mvebu: don't generate uart images, Uwe Kleine-König
  • [PATCH 4/7] scripts: kwboot: shorten delay between two boot messages, Uwe Kleine-König
  • [PATCH 2/7] scripts: kwboot: flush input and output only once, Uwe Kleine-König
  • [PATCH 1/7] scripts: kwboot: try to resync on packet boundary after receiving a NAK, Uwe Kleine-König
  • [PATCH 3/7] scripts: kwboot: improve diagnostic output, Uwe Kleine-König
  • Re: [PATCH 0/7] scripts: kwboot: various improvements, Sascha Hauer
• [PATCH 1/2] defaultenv: add defaultenv-1 in boards via defaultenv_append_directory(), Sascha Hauer
  • [PATCH 2/2] Make generic default environment type a use choice, Sascha Hauer
• [PATCH 1/2] mfd: syscon: fix exported symbol name, Lucas Stach
  • [PATCH 2/2] serial: arm_dcc: depend on !CPU_V8, Lucas Stach
  • Re: [PATCH 1/2] mfd: syscon: fix exported symbol name, Antony Pavlov
    • Re: [PATCH 1/2] mfd: syscon: fix exported symbol name, Lucas Stach
• [PATCH] blspec: fix typo, Ulrich Ölmann
• [PATCH] blspec: fix return value of entry_is_of_compatible(), Ulrich Ölmann
  • Re: [PATCH] blspec: fix return value of entry_is_of_compatible(), Sascha Hauer
• [PATCH] blspec: fix erroneus free in entry_is_of_compatible(), Ulrich Ölmann
  • Re: [PATCH] blspec: fix erroneus free in entry_is_of_compatible(), Sascha Hauer
• [PATCH 1/2] firmware: altera-serial: Make the driver match the dt binding documentation, Uwe Kleine-König
  • [PATCH 2/2] firmware: altera-serial: simplify handling of optional gpio, Uwe Kleine-König
  • Re: [PATCH 1/2] firmware: altera-serial: Make the driver match the dt binding documentation, Uwe Kleine-König
    • Re: [PATCH 1/2] firmware: altera-serial: Make the driver match the dt binding documentation, Sascha Hauer
• [PATCH/RFT] scripts: kwboot: improve reliability on Armada XP, Uwe Kleine-König
  • [PATCH v2] scripts: kwboot: improve reliability on Armada XP, Uwe Kleine-König
• [PATCH] Documentation: clarify "ioe" for netconsole, Robert Schwebel
  • Re: [PATCH] Documentation: clarify "ioe" for netconsole, Lucas Stach
• [PATCH] Documentation: clarify that patches should target the master branch., Robert Schwebel
  • Re: [PATCH] Documentation: clarify that patches should target the master branch., Sascha Hauer
• [PATCH 1/3] nand: denali: use correct interrupts in read_page, Steffen Trumtrar
  • [PATCH 2/3] nand: denali: use is_timeout in while loop, Steffen Trumtrar
  • [PATCH 3/3] nand: denali: get rid of compile-time debug information, Steffen Trumtrar
  • Re: [PATCH 1/3] nand: denali: use correct interrupts in read_page, Sascha Hauer
• [PATCH 1/3] reset: import socfpga-reset driver from linux, Steffen Trumtrar
  • [PATCH 2/3] watchdog: add designware driver, Steffen Trumtrar
    • Re: [PATCH 2/3] watchdog: add designware driver, Sascha Hauer
  • [PATCH 3/3] ARM: socfpga: dtsi: add dw-wdt reset lines, Steffen Trumtrar
  • Re: [PATCH 1/3] reset: import socfpga-reset driver from linux, Sascha Hauer
• [PATCH 1/2] param: introduce param_bitmask, Sascha Hauer
  • [PATCH 2/2] globalvar: introduce globalvar_add_simple_bitmask, Sascha Hauer
• [PATCH 1/2] nv: Allow full variable name in nvvar_add, Sascha Hauer
  • [PATCH 2/2] globalvar: Allow full variable name in globalvar_add, Sascha Hauer
• [PATCH 1/4] globalvar: Allow to remove multiple globalvars using wildcards, Sascha Hauer
  • [PATCH 4/4] globalvar: Also create globalvars from for nonvolatile device vars, Sascha Hauer
  • [PATCH 2/4] global: Make 'global' command behaviour consistent to 'nv', Sascha Hauer
  • [PATCH 3/4] nv: simplify nvvar_add, Sascha Hauer
• [PATCH] nv: Fix variable removal in nvvar_save(), Sascha Hauer
• Add and use function API for UBI, Sascha Hauer
  • [PATCH 1/4] mtd: ubi: Add API calls to create/remove volumes, Sascha Hauer
  • [PATCH 2/4] mtd: ubi: introduce barebox specific ioctl to get ubi_num, Sascha Hauer
  • [PATCH 4/4] mtd: ubi: remove now unused ioctls, Sascha Hauer
  • [PATCH 3/4] mtd: ubi: commands: use function API to access ubi volumes, Sascha Hauer
• [PATCH] environment: "wrong magic" give the impression of an error, Sam Ravnborg
  • Re: [PATCH] environment: "wrong magic" give the impression of an error, Sascha Hauer
    • [PATCH v2] environment: "wrong magic" gives the impression of an error, Sam Ravnborg
      • Re: [PATCH v2] environment: "wrong magic" gives the impression of an error, Sascha Hauer
• How to port brcmnand Linux driver?, Eric Le Bihan
  • Re: How to port brcmnand Linux driver?, Sascha Hauer
    • Re: How to port brcmnand Linux driver?, Eric Le Bihan
• [PATCH 0/2] added support for renaming UBI volumes., Giorgio Dal Molin
  • [PATCH 2/2] commands: ubi: added the new command 'ubirename' to rename ubi volumes., Giorgio Dal Molin
    • Re: [PATCH 2/2] commands: ubi: added the new command 'ubirename' to rename ubi volumes., Sascha Hauer
      • [PATCH 0/2] mtd: ubi: implement the new command 'ubirename', Giorgio Dal Molin
      • [PATCH 2/2] mtd: ubi: commands: added the new command 'ubirename'., Giorgio Dal Molin
        • Re: [PATCH 2/2] mtd: ubi: commands: added the new command 'ubirename'., Sascha Hauer
          • [PATCH 0/2 (try 2)] mtd: ubi: implement the new command 'ubirename', Giorgio Dal Molin
            • Re: [PATCH 0/2 (try 2)] mtd: ubi: implement the new command 'ubirename', Sascha Hauer
          • [PATCH 2/2] mtd: ubi: commands: added the new command 'ubirename'., Giorgio Dal Molin
          • [PATCH 1/2] mtd: ubi: add API call to rename volumes., Giorgio Dal Molin
      • [PATCH 1/2] mtd: ubi: add API call to rename volumes., Giorgio Dal Molin
    • Aw: Re: [PATCH 2/2] commands: ubi: added the new command 'ubirename' to rename ubi volumes., iw3gtf
      • Re: Re: [PATCH 2/2] commands: ubi: added the new command 'ubirename' to rename ubi volumes., Sascha Hauer
  • [PATCH 1/2] mtd: UBI: add support (ioctl) for renaming ubi volumes., Giorgio Dal Molin
• [PATCH 1/2] globalvar: Move static inline functions to common/, Sascha Hauer
  • [PATCH 2/2] globalvar: sync with nvvars, Sascha Hauer
• [PATCH] Documentation: imd: fix sphinx warning, Antony Pavlov
  • Re: [PATCH] Documentation: imd: fix sphinx warning, Sascha Hauer
• [PATCH 1/3] state: Add state to state_variable, Sascha Hauer
  • [PATCH 3/3] state: consistently pass one type as private data to dev_add_param_*, Sascha Hauer
  • [PATCH 2/3] state: make locally used function static, Sascha Hauer
• [PATCH 1/3] ARM: i.MX6: remove duplicate clock initialization, Jan Luebbe
  • [PATCH 2/3] ARM: i.MX6: fix clock gating, Jan Luebbe
  • [PATCH 3/3] ARM: i.MX6: gate PCIe when unused, Jan Luebbe
  • Re: [PATCH 1/3] ARM: i.MX6: remove duplicate clock initialization, Sascha Hauer
• [PATCH 0/2] Auto-append ip= option for NFS boot with appendrot, Enrico Jorns
  • [PATCH 2/2] fs: nfs: pick up network interface bootargs parameter, Enrico Jorns
    • Re: [PATCH 2/2] fs: nfs: pick up network interface bootargs parameter, Uwe Kleine-König
  • [PATCH 1/2] net: add linux.bootarg parameter from ifup call, Enrico Jorns
    • Re: [PATCH 1/2] net: add linux.bootarg parameter from ifup call, Sascha Hauer
• [PATCH] strings: new command, Sam Ravnborg
  • Re: [PATCH] strings: new command, Sam Ravnborg
  • Re: [PATCH] strings: new command, Sascha Hauer
• [PATCH v2 1/3] state: copy backend of_path string, Michael Olbrich
  • [PATCH v2 2/3] state: don't keep pointers to device tree nodes, Michael Olbrich
  • [PATCH v2 3/3] state: fix finding the correct parent node, Michael Olbrich
  • Re: [PATCH v2 1/3] state: copy backend of_path string, Sascha Hauer
  • Re: [PATCH v2 1/3] state: copy backend of_path string, Antony Pavlov
    • Re: [PATCH v2 1/3] state: copy backend of_path string, Sascha Hauer
• Aw: Re: errors copying UBI volumes, iw3gtf
  • Re: Re: errors copying UBI volumes, Sascha Hauer
  • Aw: Re: Re: errors copying UBI volumes, iw3gtf
• [PATCH 1/3] ARM: imx6: split out IPU QoS setup, Lucas Stach
  • [PATCH 2/3] ARM: imx6: don't execute IPU QoS setup on MX6 SX/SL, Lucas Stach
  • [PATCH 3/3] ARM: imx6qp: set NoC regulator to bypass, Lucas Stach
  • Re: [PATCH 1/3] ARM: imx6: split out IPU QoS setup, Sascha Hauer
• [PATCH 1/2] vsprintf: Add support for printing ipv4 addresses with %pI4, Sascha Hauer
  • [PATCH 2/2] convert users to %pI4, Sascha Hauer
• [PATCH 0/4] Some updates for arm/mvebu, Uwe Kleine-König
  • [PATCH 3/4] ARM: mvebu: select HAVE_DEFAULT_ENVIRONMENT_NEW, Uwe Kleine-König
  • [PATCH 2/4] ARM: mvebu_defconfig: enable all machines, AEABI, nand and net driver, Uwe Kleine-König
  • [PATCH 4/4] net: mvneta: clean txdesc before usage, Uwe Kleine-König
  • [PATCH 1/4] ARM: mvebu_defconfig: oldconfig, Uwe Kleine-König
  • Re: [PATCH 0/4] Some updates for arm/mvebu, Sascha Hauer
• [PATCH 1/2] state: don't keep pointers to any device tree data, Michael Olbrich
  • [PATCH 2/2] state: fix finding the correct parent node, Michael Olbrich
  • Re: [PATCH 1/2] state: don't keep pointers to any device tree data, Sascha Hauer
    • Re: [PATCH 1/2] state: don't keep pointers to any device tree data, Michael Olbrich
• [PATCH] mtd: make sure address-cells/size-cells are set when adding partition nodes, Michael Olbrich
  • Re: [PATCH] mtd: make sure address-cells/size-cells are set when adding partition nodes, Sascha Hauer
  • Re: [PATCH] mtd: make sure address-cells/size-cells are set when adding partition nodes, Uwe Kleine-König
• errors copying UBI volumes, iw3gtf
  • Re: errors copying UBI volumes, Alexander Shiyan
  • Re: errors copying UBI volumes, Sascha Hauer
• [PATCH 01/12] ARM: i.MX53: Add uart5 clock support, Sascha Hauer
  • [PATCH 12/12] ARM: vincell_defconfig: make smaller, Sascha Hauer
  • [PATCH 05/12] ARM: i.MX53: do not pass base address to imx*_boot_save_loc, Sascha Hauer
  • [PATCH 11/12] ARM: imx_v7_defconfig: Enable Vincell support, Sascha Hauer
  • [PATCH 10/12] ARM: i.MX53 Vincell: Add NAND xload support, Sascha Hauer
  • [PATCH 07/12] ARM: i.MX53: Detect booting from USB, Sascha Hauer
  • [PATCH 03/12] ARM: i.MX53 Vincell: Adjust bbu handler partition size to real partition size, Sascha Hauer
  • [PATCH 04/12] ARM: i.MX53 Vincell: Add PBL console support, Sascha Hauer
    • Re: [PATCH 04/12] ARM: i.MX53 Vincell: Add PBL console support, Michael Grzeschik
      • Re: [PATCH 04/12] ARM: i.MX53 Vincell: Add PBL console support, Sascha Hauer
  • [PATCH 06/12] ARM: i.MX: Provide bootsource functions for early boot code, Sascha Hauer
  • [PATCH 08/12] mtd: imx-nand: Move v3 register definitions to include file, Sascha Hauer
  • [PATCH 09/12] ARM: i.MX53: Implement NAND xload, Sascha Hauer
  • [PATCH 02/12] ARM: i.MX53 Vincell: Reset phy consistently from device tree, Sascha Hauer
• [PATCH] ARM: karo-tx6: Include correct device tree, Sascha Hauer
• [PATCH] defenv-1: remove unused variable kernelimage_type, Sascha Hauer
• [PATCH 1/2] Add comp_copy function for use with CONFIG_IMAGE_COMPRESSION_NONE, Sascha Hauer
  • [PATCH 2/2] ARM: Fix calling of arm_mem_barebox_image(), Sascha Hauer
    • Re: [PATCH 2/2] ARM: Fix calling of arm_mem_barebox_image(), Trent Piepho
      • Re: [PATCH 2/2] ARM: Fix calling of arm_mem_barebox_image(), Sascha Hauer
        • Re: [PATCH 2/2] ARM: Fix calling of arm_mem_barebox_image(), Trent Piepho
          • Re: [PATCH 2/2] ARM: Fix calling of arm_mem_barebox_image(), Sascha Hauer
• [PATCH 1/2] pbl: console: Make it work with multiple setup_c(), Sascha Hauer
  • [PATCH 2/2] ARM: i.MX6: Sabrelite: Add PBL console support, Sascha Hauer
  • Re: [PATCH 1/2] pbl: console: Make it work with multiple setup_c(), Trent Piepho
    • Re: [PATCH 1/2] pbl: console: Make it work with multiple setup_c(), Sascha Hauer
• [PATCH] ARM: imx6: reset PLL2's PFD2 on i.MX6D, Uwe Kleine-König
  • Re: [PATCH] ARM: imx6: reset PLL2's PFD2 on i.MX6D, Lucas Stach
    • [PATCH v2] ARM: imx6: reset PLL2's PFD2 on i.MX6D, Uwe Kleine-König
      • Re: [PATCH v2] ARM: imx6: reset PLL2's PFD2 on i.MX6D, Sascha Hauer
    • Re: [PATCH] ARM: imx6: reset PLL2's PFD2 on i.MX6D, Lucas Stach
• [PATCH] ARM: i.MX6: Enable parent propagation for clk_gate2, Sascha Hauer
  • Re: [PATCH] ARM: i.MX6: Enable parent propagation for clk_gate2, Sam Ravnborg