[PATCH] arm: Baltos: setup MPU PLL to run at 600MHz

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>

Signed-off-by: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
---
 arch/arm/boards/vscom-baltos/lowlevel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boards/vscom-baltos/lowlevel.c b/arch/arm/boards/vscom-baltos/lowlevel.c
index 8bce91a..87f2a74 100644
--- a/arch/arm/boards/vscom-baltos/lowlevel.c
+++ b/arch/arm/boards/vscom-baltos/lowlevel.c
@@ -93,7 +93,7 @@ static noinline int baltos_sram_init(void)
 	while (__raw_readl(AM33XX_WDT_REG(WWPS)) != 0x0);
 
 	/* Setup the PLLs and the clocks for the peripherals */
-	am33xx_pll_init(MPUPLL_M_500, DDRPLL_M_400);
+	am33xx_pll_init(MPUPLL_M_600, DDRPLL_M_400);
 	am335x_sdram_init(0x18B, &ddr3_cmd_ctrl, &ddr3_regs, &ddr3_data);
 	sdram_size = get_ram_size((void *)0x80000000, (1024 << 20));
 	if (sdram_size == SZ_256M)
-- 
2.1.4


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux