Linux USB Users
[Prev Page][Next Page]
- Re: [PATCH] usb/core: Fix race condition when removing EHCI PCI devices
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v1 1/2] USB: check port changes before hub runtime suspend for some bug device
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v1 2/2] USB: set hub's default autosuspend delay as 0
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: [PATCH 1/1] usb: Include generic_interrupt for OMAP2_PLUS
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: usb-audio: Increasing MAX_QUEUE to prevent hiccups in the audio stream?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: usb3 fails to write when using usb3 hub in usb3 port
- From: Adrian Sandu <dexter@xxxxxxxxxxx>
- Re: usb3 fails to write when using usb3 hub in usb3 port
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v1 2/2] USB: set hub's default autosuspend delay as 0
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [Libusbx-devel] libusbx-1.0.13 has been released
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: libusbx-1.0.13 has been released
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH v3] powerpc/usb: fix bug of CPU hang when missing USB PHY clock
- From: Liu Shengzhou-B36685 <B36685@xxxxxxxxxxxxx>
- [PATCH] powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY
- From: Shengzhou Liu <Shengzhou.Liu@xxxxxxxxxxxxx>
- Re: Remote wakeup vs. hub suspend
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v1 1/2] USB: check port changes before hub runtime suspend for some bug device
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: [Libusbx-devel] libusbx-1.0.13 has been released
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: USB port power off discussion
- From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
- Re: usb-audio: Increasing MAX_QUEUE to prevent hiccups in the audio stream?
- From: Matthijs Kooijman <matthijs@xxxxxxxx>
- Re: [PATCH 1/5] drivers: usb: phy: add a new driver for omap usb2 phy
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: USB port power off discussion
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
- Re: [PATCH 1/1] usb: Include generic_interrupt for OMAP2_PLUS
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v6 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: [PATCH 1/1] usb: Include generic_interrupt for OMAP2_PLUS
- From: Philippe De Swert <philippedeswert@xxxxxxxxx>
- Re: USB port power off discussion
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
- Re: USB port power off discussion
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
- Re: USB port power off discussion
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
- Re: [PATCH 1/1] usb: Include generic_interrupt for OMAP2_PLUS
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 1/1] usb: Include generic_interrupt for OMAP2_PLUS
- From: Felipe Balbi <balbi@xxxxxx>
- Re: removing the timer from cdc-ncm
- From: Oliver Neukum <oneukum@xxxxxxx>
- RE: removing the timer from cdc-ncm
- From: Alexey ORISHKO <alexey.orishko@xxxxxxxxxxxxxx>
- Re: [PATCH] usb: serial: ftdi_sio: option to hide selected interfaces of multiple interfaces convertes
- From: Robert Ryszard Paciorek <R.Paciorek@xxxxxxxxxx>
- Re: [PATCH v6 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
- From: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
- Re: [PATCH v6 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
- From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
- Re: [PATCH v6 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
- From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
- Re: [PATCH 2/5] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2
- From: Rabin Vincent <rabin@xxxxxx>
- Re: [PATCH 2/5] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2
- From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
- Re: [PATCH] USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
- From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
- Re: [PATCH 1/2] ARM: Kirkwood: ehci-orion: Add device tree binding
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH V4 0/5] ARM: OMAP: HOST: TLL driver implementation
- From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
- Re: USB port power off discussion
- From: Arjan van de Ven <arjan@xxxxxxxxxxxxxxx>
- Re: USB port power off discussion
- From: Arjan van de Ven <arjan@xxxxxxxxxxxxxxx>
- RE: [PATCH v3] USB: PHY: Re-organize Tegra USB PHY driver
- From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
- Re: [PATCH v3] USB: PHY: Re-organize Tegra USB PHY driver
- From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
- Re: USB port power off discussion
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB port power off discussion
- From: Peter Stuge <peter@xxxxxxxx>
- [PATCH] USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
- From: Joachim Eastwood <manabian@xxxxxxxxx>
- Re: Remote wakeup vs. hub suspend
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: USB port power off discussion
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
- Re: USB port power off discussion
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
- Re: USB port power off discussion
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
- Re: [PATCH v1 2/2] USB: set hub's default autosuspend delay as 0
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: [PATCH v1 2/2] USB: set hub's default autosuspend delay as 0
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Remote wakeup vs. hub suspend
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v1 1/2] USB: check port changes before hub runtime suspend for some bug device
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: usb3 fails to write when using usb3 hub in usb3 port
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB port power off discussion
- From: Lan Tianyu <lantianyu1986@xxxxxxxxx>
- Re: USB port power off discussion
- From: Lan Tianyu <lantianyu1986@xxxxxxxxx>
- usb3 fails to write when using usb3 hub in usb3 port
- From: Adrian Sandu <dexter@xxxxxxxxxxx>
- Re: [PATCH v1 2/2] USB: set hub's default autosuspend delay as 0
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: [PATCH v1 1/2] USB: check port changes before hub runtime suspend for some bug device
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: [PATCH] USB: qcaux: add Pantech vendor class match
- From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
- Re: USB port power off discussion
- From: Peter Stuge <peter@xxxxxxxx>
- [PATCH] USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support
- From: Antonio Ospite <ospite@xxxxxxxxxxxxxxxxx>
- Re: USB port power off discussion
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
- Re: AMD SB950 USB 2 don't work on kernel 3.x but worked on 2.6.x
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] USB: ohci-at91: fix PIO handling in relation with number of ports
- From: Joachim Eastwood <manabian@xxxxxxxxx>
- Re: [PATCH v4] can: kvaser_usb: Add support for Kvaser CAN/USB devices
- From: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx>
- Re: [PATCH v1 2/2] USB: set hub's default autosuspend delay as 0
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v1 1/2] USB: check port changes before hub runtime suspend for some bug device
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [alsa-devel] [PATCH v2 00/34] i.MX multi-platform support
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- AMD SB950 USB 2 don't work on kernel 3.x but worked on 2.6.x
- From: dAgeCKo <dagecko@xxxxxxx>
- Re: [PATCH v3] powerpc/usb: fix bug of CPU hang when missing USB PHY clock
- From: Greg KH <greg@xxxxxxxxx>
- RE: [PATCH] USB: g_mass_storage: Hide caching mode page to improve write speed for Windows
- From: Leo Song <liangs@xxxxxxxxxxx>
- Re: [PATCH v3] powerpc/usb: fix bug of CPU hang when missing USB PHY clock
- From: Kumar Gala <galak@xxxxxxxxxxxxxxxxxxx>
- [PATCH v1 2/2] USB: set hub's default autosuspend delay as 0
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- [PATCH v1 1/2] USB: check port changes before hub runtime suspend for some bug device
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- [PATCH v1 0/2] USB: two changes on hub autosuspend
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- [PATCH] usb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86 systems
- From: gautam.vivek@xxxxxxxxxxx
- Re: USB port power off discussion
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
- Re: [RFC 2/3] ARM: move udc_pxa2xx.h to linux/platform_data
- From: Krzysztof Halasa <khc@xxxxxxxxx>
- Re: USB port power off discussion
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
- Re: [alsa-devel] [PATCH v2 00/34] i.MX multi-platform support
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- RE: [PATCH v3] USB: PHY: Re-organize Tegra USB PHY driver
- From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
- Re: [alsa-devel] [PATCH v2 00/34] i.MX multi-platform support
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [alsa-devel] [PATCH v2 00/34] i.MX multi-platform support
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [PATCH 1/2] ARM: Kirkwood: ehci-orion: Add device tree binding
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [PATCH 2/2] USB: set hub's default autosuspend delay as 0
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] USB: check port changes before hub runtime suspend
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: [PATCH 00/10] Convert MSM to common clock framework
- From: Mike Turquette <mturquette@xxxxxxxxxx>
- Re: [RFC 3/3] ARM/AVR32: get rid of serial_at91.h
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC 2/3] ARM: move udc_pxa2xx.h to linux/platform_data
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC 1/3] ARM: move serial_sa1100.h header file to linux/platform_data
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH V4 0/5] ARM: OMAP: HOST: TLL driver implementation
- From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/5] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2
- From: Rabin Vincent <rabin@xxxxxx>
- Re: USB port power off discussion
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: USB port power off discussion
- From: Peter Stuge <peter@xxxxxxxx>
- Re: USB port power off discussion
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: cannot submit urb 0, error -22: internal error followed by USB hung tasks
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB port power off discussion
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: USB port power off discussion
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: ftdi_sio urn failed to clear flow control
- From: Greg KH <greg@xxxxxxxxx>
- Re: [Patch v4] ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH v3] powerpc/usb: fix bug of CPU hang when missing USB PHY clock
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH] USB: EHCI: convert warning messages to debug-level
- From: Greg KH <greg@xxxxxxxxx>
- Re: USB port power off discussion
- From: Peter Stuge <peter@xxxxxxxx>
- Re: 0711:5100 sisusbvga driver not working with StarTech USB2VGAE2
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB port power off discussion
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: USB port power off discussion
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] USB: check port changes before hub runtime suspend
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/4] usb/gadget: remove DMA_ADDR_INVALID from f_uac2 and file storage
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] USB: set hub's default autosuspend delay as 0
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB port power off discussion
- From: Peter Stuge <peter@xxxxxxxx>
- Re: USB port power off discussion
- From: Peter Stuge <peter@xxxxxxxx>
- RE: [PATCH] USB: g_mass_storage: Hide caching mode page to improve write speed for Windows
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] USB: g_mass_storage: Hide caching mode page to improve write speed for Windows
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB port power off discussion
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH v3] USB: PHY: Re-organize Tegra USB PHY driver
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH V2] ACPI: Allow acpi binding with usb3.0 hub
- From: Len Brown <lenb@xxxxxxxxxx>
- Re: [PATCH V2] ACPI: Allow acpi binding with usb3.0 hub
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH net-next] net: qmi_wwan: adding Huawei E367, ZTE MF683 and Pantech P4200
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [alsa-devel] [PATCH v2 00/34] i.MX multi-platform support
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- Re: [alsa-devel] [PATCH v2 00/34] i.MX multi-platform support
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- Re: [PATCH 1/2] USB: check port changes before hub runtime suspend
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] USB: set hub's default autosuspend delay as 0
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: [PATCH v3] USB: PHY: Re-organize Tegra USB PHY driver
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- [PATCH 2/4] usb/gadget: provide a variable for interface and alt settings
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH 4/4] usb/gadget: let f_* use usb_string_ids_tab() where it makes sense
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH 3/4] usb/gadget: f_uac2: use the strings directly
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH 1/4] usb/gadget: remove DMA_ADDR_INVALID from f_uac2 and file storage
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] USB: set hub's default autosuspend delay as 0
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] USB: set hub's default autosuspend delay as 0
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] USB: check port changes before hub runtime suspend
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] USB: set hub's default autosuspend delay as 0
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- 0711:5100 sisusbvga driver not working with StarTech USB2VGAE2
- From: Anthony Hook <anthony.hook3@xxxxxxxxx>
- RE: [PATCH] USB: g_mass_storage: Hide caching mode page to improve write speed for Windows
- From: Michal Nazarewicz <mina86@xxxxxxxxxx>
- Re: [PATCH v3] USB: PHY: Re-organize Tegra USB PHY driver
- From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
- [PATCH v3] USB: PHY: Re-organize Tegra USB PHY driver
- From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
- RE: [PATCH] USB: g_mass_storage: Hide caching mode page to improve write speed for Windows
- From: Leo Song <liangs@xxxxxxxxxxx>
- Re: [PATCH] USB: g_mass_storage: Hide caching mode page to improve write speed for Windows
- From: Michal Nazarewicz <mina86@xxxxxxxxxx>
- Re: [PATCH 2/2] USB: set hub's default autosuspend delay as 0
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: [PATCH v4] can: kvaser_usb: Add support for Kvaser CAN/USB devices
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- RE: [PATCH v2] USB: PHY: Re-organize Tegra USB PHY driver
- From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
- Re: [RFC 2/3] ARM: move udc_pxa2xx.h to linux/platform_data
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [RFC 2/3] ARM: move udc_pxa2xx.h to linux/platform_data
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v2] USB: PHY: Re-organize Tegra USB PHY driver
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [RFC 2/3] ARM: move udc_pxa2xx.h to linux/platform_data
- From: Eric Miao <eric.y.miao@xxxxxxxxx>
- [RFC 3/3] ARM/AVR32: get rid of serial_at91.h
- From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
- [RFC 2/3] ARM: move udc_pxa2xx.h to linux/platform_data
- From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
- [RFC 1/3] ARM: move serial_sa1100.h header file to linux/platform_data
- From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
- [RFC 0/3] Move some ARM header files to more appropriate locations
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- removing the timer from cdc-ncm
- From: Oliver Neukum <oneukum@xxxxxxx>
- Re: [alsa-devel] [PATCH v2 00/34] i.MX multi-platform support
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [alsa-devel] [PATCH v2 00/34] i.MX multi-platform support
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- Re: Samsung SCX-3205 scanner does not work with Toshiba Satellite L855
- From: Michal Nowak <newman.x@xxxxxxxxx>
- Re: [PATCH 1/4] usb: phy: add a new driver for usb3 phy
- From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
- Re: [PATCH 1/2] USB: check port changes before hub runtime suspend
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: USB port power off discussion
- From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
- Re: [PATCH V2] ACPI: Allow acpi binding with usb3.0 hub
- From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
- [PATCH] USB: g_mass_storage: Hide caching mode page to improve write speed for Windows
- From: Leo Song <liangs@xxxxxxxxxxx>
- [PATCH 00/10] Convert MSM to common clock framework
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- [PATCH 01/10] usb: otg: msm: Convert to clk_prepare/unprepare
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] USB: check port changes before hub runtime suspend
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: [PATCH net-next] net1080: Neaten netdev_dbg use
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: USB port power off discussion
- From: Peter Chen <hzpeterchen@xxxxxxxxx>
- Re: [RFC PATCH 0/3] usbnet: support runtime PM triggered by link change
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] USB: set hub's default autosuspend delay as 0
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] USB: set hub's default autosuspend delay as 0
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: [PATCH V2] ACPI: Allow acpi binding with usb3.0 hub
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- [PATCH net-next] net1080: Neaten netdev_dbg use
- From: Joe Perches <joe@xxxxxxxxxxx>
- USB port power off discussion
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCHv4 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: [PATCH net] net: qmi_wwan: call subdriver with control intf only
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH v2] USB: remove dbg() usage in USB networking drivers
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: Samsung SCX-3205 scanner does not work with Toshiba Satellite L855
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- libusbx-1.0.13 has been released
- From: Pete Batard <pete@xxxxxxx>
- Re: [RFC PATCH 0/3] usbnet: support runtime PM triggered by link change
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [RFC PATCH 0/3] usbnet: support runtime PM triggered by link change
- From: Oliver Neukum <oliver@xxxxxxxxxx>
- Re: [RFC PATCH v1 1/3] usbnet: introduce usbnet_link_change API
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [RFC PATCH 0/3] usbnet: support runtime PM triggered by link change
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH v3] HID: keep dev_rdesc unmodified and use it for comparisons
- From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
- Re: [PATCH 03/29] ARM: OMAP1: Make plat/mux.h omap1 only
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH v3] HID: keep dev_rdesc unmodified and use it for comparisons
- From: "Kevin Daughtridge" <kevin@xxxxxxxx>
- Re: BEEMO(OPTION) alias PANTECH P4200 LTE-Modem
- From: Dan Williams <dcbw@xxxxxxxxxx>
- Re: BEEMO(OPTION) alias PANTECH P4200 LTE-Modem
- From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
- Re: [PATCH 1/2] USB: check port changes before hub runtime suspend
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] USB: set hub's default autosuspend delay as 0
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: BEEMO(OPTION) alias PANTECH P4200 LTE-Modem
- From: Dan Williams <dcbw@xxxxxxxxxx>
- Re: [PATCH 2/2] USB: set hub's default autosuspend delay as 0
- From: Rajaram R <rajaram.officemail@xxxxxxxxx>
- Re: [PATCH] USB: qcaux: add Pantech vendor class match
- From: Dan Williams <dcbw@xxxxxxxxxx>
- Re: [PATCH 2/2] USB: set hub's default autosuspend delay as 0
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: [PATCH v2 00/34] i.MX multi-platform support
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 1/2] USB: check port changes before hub runtime suspend
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] USB: set hub's default autosuspend delay as 0
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: cannot submit urb 0, error -22: internal error followed by USB hung tasks
- From: Gian-Carlo Pascutto <gcp@xxxxxxxxx>
- Re: [PATCH v2 00/34] i.MX multi-platform support
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- Re: [PATCH 2/2] USB: set hub's default autosuspend delay as 0
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH v2] uas: remove aborted field, replace with status bit.
- From: Gerd Hoffmann <kraxel@xxxxxxxxxx>
- [PATCH v2] uas: remove aborted field, replace with status bit.
- From: Gerd Hoffmann <kraxel@xxxxxxxxxx>
- Re: [PATCH 1/2] USB: check port changes before hub runtime suspend
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 00/34] i.MX multi-platform support
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- Re: [PATCH v2 00/34] i.MX multi-platform support
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- RE: [PATCH v2] USB: PHY: Re-organize Tegra USB PHY driver
- From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
- Re: [PATCH v2] USB: PHY: Re-organize Tegra USB PHY driver
- From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 00/34] i.MX multi-platform support
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- Re: [PATCH 3/5] uas: remove aborted field, replace with status bit.
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [PATCH v2 00/34] i.MX multi-platform support
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH 2/2] USB: set hub's default autosuspend delay as 0
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- [PATCH 1/2] USB: check port changes before hub runtime suspend
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: [PATCH v2] USB: remove dbg() usage in USB networking drivers
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] USB: remove dbg() usage in USB networking drivers
- From: Joe Perches <joe@xxxxxxxxxxx>
- Re: [PATCH] USB: fix missed resume for auto-suspend failed interface
- From: Oliver Neukum <oneukum@xxxxxxx>
- Re: [RFC PATCH 0/3] usbnet: support runtime PM triggered by link change
- From: Bjørn Mork <bjorn@xxxxxxx>
- Re: [PATCH] USB: fix missed resume for auto-suspend failed interface
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- AW: AW: USB problem on beagleboard clone
- From: "Maximilian Schwerin" <Maximilian.Schwerin@xxxxxxxxx>
- Re: [PATCH v2 00/34] i.MX multi-platform support
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] USB: fix missed resume for auto-suspend failed interface
- From: Oliver Neukum <oneukum@xxxxxxx>
- [PATCH net-next] net: qmi_wwan: adding Huawei E367, ZTE MF683 and Pantech P4200
- From: Bjørn Mork <bjorn@xxxxxxx>
- Re: [PATCH 02/12] usb: chipidea: udc: add pullup fuction, needed by the uvc gadget
- From: Peter Chen <hzpeterchen@xxxxxxxxx>
- [PATCH v2 16/34] usb: ehci-mxc: remove unneeded mach/hardware.h inclusion
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- [PATCH v2 00/34] i.MX multi-platform support
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- [PATCH] USB: fix missed resume for auto-suspend failed interface
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- RE: [PATCH v2] USB: PHY: Re-organize Tegra USB PHY driver
- From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
- [PATCH v4] can: kvaser_usb: Add support for Kvaser CAN/USB devices
- From: Olivier Sobrie <olivier@xxxxxxxxx>
- Re: [PATCH v3 0/3] ARM: dts: omap: add dt data for MUSB
- From: Benoit Cousson <b-cousson@xxxxxx>
- RE: [PATCH v2 0/2] Some tiny changes for split phy from otg
- From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
- RE: [PATCH 0/4] Add PHY nofity for some i.mx SoCs
- From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
- [Patch v4] ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
- From: Rene Buergel <rene.buergel@xxxxxxxxx>
- [PATCH 03/29] ARM: OMAP1: Make plat/mux.h omap1 only
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] USB: EHCI: convert warning messages to debug-level
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH] USB: EHCI: remove useless test
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH V4 0/5] ARM: OMAP: HOST: TLL driver implementation
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH V4 5/5] ARM: OMAP: Remove older device name of the USB TLL clocks
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH V4 1/5] ARM: OMAP: Add the USB TLL clocks device name
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 7/8] usb/gadget: fix error path in uvc_function_bind()
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH] net: qmi_wwan: adding Huawei E367, ZTE MF683 and Pantech P4200
- From: Bjørn Mork <bjorn@xxxxxxx>
- [PATCH] USB: option: blacklist QMI interface on ZTE MF683
- From: Bjørn Mork <bjorn@xxxxxxx>
- [PATCH] USB: qcaux: add Pantech vendor class match
- From: Bjørn Mork <bjorn@xxxxxxx>
- Re: [PATCH 0/4] Add PHY nofity for some i.mx SoCs
- From: Mike Thompson <mpthompson@xxxxxxxxx>
- [PATCH v2] USB: remove dbg() usage in USB networking drivers
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC] How to handle delays in isochronous transfers?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] USB: remove dbg() usage in USB networking drivers
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: BEEMO(OPTION) alias PANTECH P4200 LTE-Modem
- From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
- Re: BEEMO(OPTION) alias PANTECH P4200 LTE-Modem
- From: Bjørn Mork <bjorn@xxxxxxx>
- Re: cannot submit urb 0, error -22: internal error followed by USB hung tasks
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] HID: leave dev_rdesc unmodified and use it for comparisons
- From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
- Re: BEEMO(OPTION) alias PANTECH P4200 LTE-Modem
- From: Bjørn Mork <bjorn@xxxxxxx>
- Re: USB: EHCI: Many "Waited too long for the async..."
- From: Thomas Voegtle <tv@xxxxxxxx>
- Re: USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
- From: Rene Buergel <rene.buergel@xxxxxxxxx>
- Re: [RFC] How to handle delays in isochronous transfers?
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH] USB: remove dbg() usage in USB networking drivers
- From: Joe Perches <joe@xxxxxxxxxxx>
- Re: XHCI: URB not cancelled during disconnect of a MSC device
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/4] usb: dwc3: Fix gadget pullup in SS mode
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 2/4] usb: dwc3: Fix gadget pullup in SS mode
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH] USB: remove dbg() usage in USB networking drivers
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: USB: EHCI: Many "Waited too long for the async..."
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] HID: leave dev_rdesc unmodified and use it for comparisons
- From: Kevin Daughtridge <kevin@xxxxxxxx>
- Re: [PATCH 2/4] usb: dwc3: Fix gadget pullup in SS mode
- From: Felipe Balbi <balbi@xxxxxx>
- Re: AW: USB problem on beagleboard clone
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: xhci inc_deq question
- From: loody <miloody@xxxxxxxxx>
- [PATCH v2 5/5] uas: add locking
- From: Gerd Hoffmann <kraxel@xxxxxxxxxx>
- [PATCH] usb: otg: Resolving a config conflict between omap4030_usb/omap6030 and usb_musb_omap2plus
- From: jrm.kurtz@xxxxxxxxx
- Re: [RFC] Documentation update for Isochronous URB handling
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 4/4] usb: phy: omap-usb2: enable 960Mhz clock for omap5
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 4/4] usb: phy: omap-usb2: enable 960Mhz clock for omap5
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 4/4] usb: phy: omap-usb2: enable 960Mhz clock for omap5
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: [PATCH 1/4] usb: phy: add a new driver for usb3 phy
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- [PATCH] sierra_ms: don't keep unused variable
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH 2/3] usb: gadget: Add USB functions gadget
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: BEEMO(OPTION) alias PANTECH P4200 LTE-Modem
- From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
- Re: [PATCH 5/5] uas: add locking
- From: Oliver Neukum <oneukum@xxxxxxx>
- [PATCH 4/5] uas: fix abort
- From: Gerd Hoffmann <kraxel@xxxxxxxxxx>
- [PATCH 5/5] uas: add locking
- From: Gerd Hoffmann <kraxel@xxxxxxxxxx>
- [PATCH 2/5] uas: fix task management
- From: Gerd Hoffmann <kraxel@xxxxxxxxxx>
- [PATCH 0/5] uas: a bunch of bugfixes.
- From: Gerd Hoffmann <kraxel@xxxxxxxxxx>
- [PATCH 1/5] uas: keep track of command urbs
- From: Gerd Hoffmann <kraxel@xxxxxxxxxx>
- [PATCH 3/5] uas: remove aborted field, replace with status bit.
- From: Gerd Hoffmann <kraxel@xxxxxxxxxx>
- Re: [PATCH 2/3] usb: gadget: Add USB functions gadget
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v2 RESEND] USB: chipidea: convert to use devm_request_irq
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 4/4] usb: phy: omap-usb2: enable 960Mhz clock for omap5
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v2] staging: usbip: stub_dev: Fixed oops during removal of usbip_host
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH 3/4] usb: phy: omap-usb3: Decrease the number of transitions to recovery
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v2] staging: usbip: vhci_hcd: Fixed oops during removal of vhci_hcd
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH 2/4] usb: dwc3: Fix gadget pullup in SS mode
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v2] HID: leave dev_rdesc unmodified and use it for comparisons
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [PATCH v2] HID: leave dev_rdesc unmodified and use it for comparisons
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- [PATCH v2] staging: usbip: stub_dev: Fixed oops during removal of usbip_host
- From: navin patidar <navinp@xxxxxxx>
- [PATCH v2] staging: usbip: vhci_hcd: Fixed oops during removal of vhci_hcd
- From: navin patidar <navinp@xxxxxxx>
- [PATCH 3/4] usb: phy: omap-usb3: Decrease the number of transitions to recovery
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH 0/4] usb: phy: add usb3 phy driver
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH 1/4] usb: phy: add a new driver for usb3 phy
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH 4/4] usb: phy: omap-usb2: enable 960Mhz clock for omap5
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH 2/4] usb: dwc3: Fix gadget pullup in SS mode
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH V4 0/5] ARM: OMAP: HOST: TLL driver implementation
- From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
- RE: [PATCH 2/3] usb: gadget: Add USB functions gadget
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH] Documentation: dt: bindings: Add missing information to omap-usb.txt
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- RE: [PATCH] fsl/usb: Add support for USB controller version 2.4
- From: Mehresh Ramneek-B31383 <B31383@xxxxxxxxxxxxx>
- [PATCH v3 3/3] ARM: dts: omap: Add usb_otg and glue data
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v3 2/3] ARM: dts: Add twl4030-usb data
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v3 0/3] ARM: dts: omap: add dt data for MUSB
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- [PATCH v3 1/3] ARM: dts: Add twl6030-usb data
- From: Kishon Vijay Abraham I <kishon@xxxxxx>
- Re: [PATCH] fsl/usb: Add support for USB controller version 2.4
- From: Greg KH <greg@xxxxxxxxx>
- [PATCH] fsl/usb: Add support for USB controller version 2.4
- From: Ramneek Mehresh <ramneek.mehresh@xxxxxxxxxxxxx>
- Re: [RFC PATCH v1 2/3] usbnet: apply usbnet_link_change
- From: Oliver Neukum <oneukum@xxxxxxx>
- Re: [RFC PATCH v1 1/3] usbnet: introduce usbnet_link_change API
- From: Oliver Neukum <oneukum@xxxxxxx>
- RE: [PATCH v2 1/1] USB: EHCI: Tegra: Fix wrong register definition
- From: Jim Lin <jilin@xxxxxxxxxx>
- Re: [PATCH v2 1/1] USB: EHCI: Tegra: Fix wrong register definition
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] HID: leave dev_rdesc unmodified and use it for comparisons
- From: Jiri Slaby <jslaby@xxxxxxx>
- RE: [PATCH v2 1/1] USB: EHCI: Tegra: Fix wrong register definition
- From: Jim Lin <jilin@xxxxxxxxxx>
- Re: [PATCH v2 1/1] USB: EHCI: Tegra: Fix wrong register definition
- From: Jim Lin <jilin@xxxxxxxxxx>
- Re: [PATCH v3] USB: mxs-phy: add basic otg support
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: usb-serial.c:1415 code aligned with following code on line 1416
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- AW: USB problem on beagleboard clone
- From: "Maximilian Schwerin" <Maximilian.Schwerin@xxxxxxxxx>
- Re: [PATCH v2 1/1] USB: EHCI: Tegra: Fix wrong register definition
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH v2 1/1] USB: EHCI: Tegra: Fix wrong register definition
- From: Jim Lin <jilin@xxxxxxxxxx>
- [PATCH v2] HID: leave dev_rdesc unmodified and use it for comparisons
- From: Kevin Daughtridge <kevin@xxxxxxxx>
- Re: [PATCH] usbhid: call report_fixup before comparing descriptors
- From: Kevin Daughtridge <kevin@xxxxxxxx>
- Re: [PATCH v2 RESEND] USB: chipidea: convert to use devm_request_irq
- From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
- Re: [PATCH v2 RESEND] USB: chipidea: convert to use devm_request_irq
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH v2 10/11] USB: chipidea: add set_vbus_power support
- From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
- Re: USB problem on beagleboard clone
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH v2 RESEND] USB: chipidea: convert to use devm_request_irq
- From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
- Re: [PATCH] USB: chipidea: use OTGSC_BSV to detect vbus valid
- From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
- Re: [PATCH v3] USB: mxs-phy: add basic otg support
- From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
- usb-serial.c:1415 code aligned with following code on line 1416
- From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
- Re: USB: EHCI: Many "Waited too long for the async..."
- From: Thomas Voegtle <tv@xxxxxxxx>
- Re: USB: EHCI: Many "Waited too long for the async..."
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- USB: EHCI: Many "Waited too long for the async..."
- From: Thomas Voegtle <tv@xxxxxxxx>
- Re: [PATCH] USB: remove CONFIG_EXPERIMENTAL dependancies
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Touchscreen USB HID gadget
- From: Constantine Shulyupin <const@xxxxxxxxxxxxx>
- Re: USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
- From: Greg KH <greg@xxxxxxxxx>
- cannot submit urb 0, error -22: internal error followed by USB hung tasks
- From: Gian-Carlo Pascutto <gcp@xxxxxxxxx>
- RE: [PATCH 2/3] usb: gadget: Add USB functions gadget
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usbhid: call report_fixup before comparing descriptors
- From: "Henrik Rydberg" <rydberg@xxxxxxxxxxx>
- RE: [PATCH 2/3] usb: gadget: Add USB functions gadget
- From: Michal Nazarewicz <mina86@xxxxxxxxxx>
- Re: [PATCH] EHCI/Xen: propagate controller reset information to hypervisor
- From: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
- Re: [PATCH] EHCI/Xen: propagate controller reset information to hypervisor
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH 3/3] usb: gadget: port f_mass_storage to USB functions gadget
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- Re: [PATCH] EHCI/Xen: propagate controller reset information to hypervisor
- From: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
- RE: [PATCH 2/3] usb: gadget: Add USB functions gadget
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- Re: XHCI Bug discovered in 3.6-RC6 (solution included)
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH v2] powerpc/usb: fix bug of CPU hang when missing USB PHY clock
- From: Greg KH <greg@xxxxxxxxx>
- Re: [RFC PATCH v1 0/3] usbnet: runtime suspend when link becomes down
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: [PATCH 1/1] USB: EHCI: Tegra: Fix wrong register definition
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC PATCH v1 0/3] usbnet: runtime suspend when link becomes down
- From: Oliver Neukum <oneukum@xxxxxxx>
- Re: [usb:usb-next 25/32] drivers/usb/serial/omninet.c:165:6: warning: unused variable 'i'
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] EHCI/Xen: propagate controller reset information to hypervisor
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [RFC PATCH v1 3/3] usbnet: support runtime PM triggered by link change
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- [RFC PATCH v1 2/3] usbnet: apply usbnet_link_change
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- [RFC PATCH v1 1/3] usbnet: introduce usbnet_link_change API
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- [RFC PATCH v1 0/3] usbnet: runtime suspend when link becomes down
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- [usb:usb-next 25/32] drivers/usb/serial/omninet.c:165:6: warning: unused variable 'i'
- From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
- RE: Linux USB Serial
- From: "Steven J. Ackerman" <steve@xxxxxxxxxxxxxx>
- Re: [PATCH] staging: usbip: stub_dev: Fixed oops during removal of usbip_host
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH] usbhid: call report_fixup before comparing descriptors
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [PATCH] staging: usbip: stub_dev: Fixed oops during removal of usbip_host
- From: navin patidar <navinp@xxxxxxx>
- [PATCH] EHCI/Xen: propagate controller reset information to hypervisor
- From: "Jan Beulich" <JBeulich@xxxxxxxx>
- Re: [PATCH V4 0/5] ARM: OMAP: HOST: TLL driver implementation
- From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
- Re: [PATCH] staging: usbip: stub_dev: Fixed oops during removal of usbip_host
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH] staging: usbip: stub_dev: Fixed oops during removal of usbip_host
- From: navin patidar <navinp@xxxxxxx>
- RE: [PATCH v2] powerpc/usb: fix bug of CPU hang when missing USB PHY clock
- From: Liu Shengzhou-B36685 <B36685@xxxxxxxxxxxxx>
- [PATCH v3] powerpc/usb: fix bug of CPU hang when missing USB PHY clock
- From: Shengzhou Liu <Shengzhou.Liu@xxxxxxxxxxxxx>
- [PATCH 1/1] USB: EHCI: Tegra: Fix wrong register definition
- From: Jim Lin <jilin@xxxxxxxxxx>
- Re: [PATCH 00/34] i.MX multi-platform support
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- Re: [alsa-devel] [PATCH 00/34] i.MX multi-platform support
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- Re: [PATCH 00/34] i.MX multi-platform support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] staging: usbip: vhci_hcd: Fixed oops during removal of vhci_hcd
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH] staging: usbip: stub_dev: Fixed oops during removal of usbip_host
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH v3 3/3]: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
- From: Rene Buergel <rene.buergel@xxxxxxxxx>
- Re: [PATCH v3 2/3]: ezusb: add functions for firmware download
- From: Rene Buergel <rene.buergel@xxxxxxxxx>
- Re: [PATCH v3 1/3]: ezusb: add support for Cypress FX2LP
- From: Rene Buergel <rene.buergel@xxxxxxxxx>
- [PATCH v3 0/3]: ezusb FX2 support, firmware downloading support
- From: Rene Buergel <rene.buergel@xxxxxxxxx>
- Re: Linux USB Serial
- From: Oliver Neukum <oneukum@xxxxxxx>
- Re: [PATCH v2] powerpc/usb: fix bug of CPU hang when missing USB PHY clock
- From: Kumar Gala <galak@xxxxxxxxxxxxxxxxxxx>
- [PATCH] staging: usbip: vhci_hcd: Fixed oops during removal of vhci_hcd
- From: navin patidar <navinp@xxxxxxx>
- [PATCH] staging: usbip: stub_dev: Fixed oops during removal of usbip_host
- From: navin patidar <navinp@xxxxxxx>
- Re: [PATCH v2 2/2] usb: phy: rename otg.c to phy.c
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [PATCH v2 2/2] usb: phy: rename otg.c to phy.c
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] usb: phy: rename otg.c to phy.c
- From: Fabio Estevam <festevam@xxxxxxxxx>
- [PATCH v2 1/2] usb: phy: rename enum usb_otg_state to usb_state
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- [PATCH v2 2/2] usb: phy: rename otg.c to phy.c
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- [PATCH v2 0/2] Some tiny changes for split phy from otg
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: XHCI Bug discovered in 3.6-RC6 (solution included)
- From: "Sebastian Gottschall (DD-WRT)" <s.gottschall@xxxxxxxxxx>
- RE: [PATCH v3] USB: mxs-phy: add basic otg support
- From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
- RE: Linux USB Serial
- From: "Steven J. Ackerman" <steve@xxxxxxxxxxxxxx>
- Re: Linux USB Serial
- From: "'Greg KH'" <gregkh@xxxxxxxxxxxxxxxxxxx>
- RE: Linux USB Serial
- From: "Steven J. Ackerman" <steve@xxxxxxxxxxxxxx>
- Re: Linux USB Serial
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- RE: Linux USB Serial
- From: "Steven J. Ackerman" <steve@xxxxxxxxxxxxxx>
- Re: [PATCH] usb/core: Fix race condition when removing EHCI PCI devices
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Linux USB Serial
- From: Bjørn Mork <bjorn@xxxxxxx>
- [PATCH] usbhid: call report_fixup before comparing descriptors
- From: Kevin Daughtridge <kevin@xxxxxxxx>
- Linux USB Serial
- From: "Steven J. Ackerman" <steve@xxxxxxxxxxxxxx>
- Re: [PATCH] asix: Support DLink DUB-E100 H/W Ver C1
- From: Søren Holm <sgh@xxxxxx>
- Re: [PATCH] Increase XHCI suspend timeout to 16ms
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: XHCI: URB not cancelled during disconnect of a MSC device
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: [PATCH] asix: Support DLink DUB-E100 H/W Ver C1
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: [PATCH] usb/core: Fix race condition when removing EHCI PCI devices
- From: Don Zickus <dzickus@xxxxxxxxxx>
- Re: [PATCH] usb: serial: ftdi_sio: option to hide selected interfaces of multiple interfaces convertes
- From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
- Re: Lifetime of descriptors in f_fs
- From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
- Re: [PATCH 3/3] usb: gadget: port f_mass_storage to USB functions gadget
- From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
- Re: [PATCH 3/3] usb: gadget: port f_mass_storage to USB functions gadget
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [PATCH 2/3] usb: gadget: Add USB functions gadget
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [PATCH 3/3] usb: gadget: port f_mass_storage to USB functions gadget
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [PATCH 8/8] usb/gadget: always update HS/SS descriptors and create a copy of them
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [PATCH 6/8] usb/gadget: free requests in pn_bind()'s error path
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: [PATCH 3/8] usb/gadget: remove c->highpseed = true from f_mini and uac1
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: Question regarding kernel 3.5 dropping support for usbfs
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] USB: remove CONFIG_EXPERIMENTAL dependancies
- From: Felipe Balbi <balbi@xxxxxx>
- Re: Samsung SCX-3205 scanner does not work with Toshiba Satellite L855
- From: Michal Nowak <newman.x@xxxxxxxxx>
- Re: Question regarding kernel 3.5 dropping support for usbfs
- From: Unknown <aahamlin@xxxxxxxxx>
- Re: [RFC PATCH] drivers: phy: add generic PHY framework
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [RFC PATCH 3/3] usbnet: support runtime PM triggered by link change
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- [PATCH v6 5/5] ARM: Exynos4210: Enabling samsung-usbphy driver
- From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
- [PATCH v6 4/5] ARM: S3C64XX: Enabling samsung-usbphy driver
- From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
- [PATCH v6 3/5] ARM: S3C64XX: Removing old phy setup code
- From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
- [PATCH v6 2/5] usb: s3c-hsotg: Adding phy driver support
- From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
- [PATCH v6 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
- From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
- [PATCH v6 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
- From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
- Re: [PATCH] staging: usbip: stub_dev: Fixed oops during removal of usbip_host
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 00/34] i.MX multi-platform support
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 3/8] usb/gadget: remove c->highpseed = true from f_mini and uac1
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [PATCH 6/8] usb/gadget: free requests in pn_bind()'s error path
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Re: [PATCH 17/34] usb: ehci-mxc: remove unneeded mach/hardware.h inclusion
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC PATCH 3/3] usbnet: support runtime PM triggered by link change
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH] usb: remove junk from store_remove_id
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 8/8] usb/gadget: always update HS/SS descriptors and create a copy of them
- From: Michal Nazarewicz <mina86@xxxxxxxxxx>
- RE: [PATCH v3] USB: mxs-phy: add basic otg support
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- RE: [PATCH v3] USB: mxs-phy: add basic otg support
- From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
- Re: [PATCH v3] USB: mxs-phy: add basic otg support
- From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
- About OTG operation for chipidea driver
- From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
- Re: [RFC PATCH] drivers: phy: add generic PHY framework
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- RE: [RFC PATCH 3/3] usbnet: support runtime PM triggered by link change
- From: "David Laight" <David.Laight@xxxxxxxxxx>
- Re: [PATCH] usb: gadget: lpc32xx_udc: Fix compatibility with STOTG04
- From: Roland Stigge <stigge@xxxxxxxxx>
- [PATCH v3] USB: mxs-phy: add basic otg support
- From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
- Re: [PATCH v2 05/11] USB: chipidea: don't let probe fail if otg controller start one role failed
- From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
- RE: [PATCH] USB: chipidea: use OTGSC_BSV to detect vbus valid
- From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
- Re: [RFC PATCH 3/3] usbnet: support runtime PM triggered by link change
- From: Oliver Neukum <oneukum@xxxxxxx>
- [PATCH] USB: chipidea: use OTGSC_BSV to detect vbus valid
- From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
- Re: [RFC PATCH 0/3] usbnet: support runtime PM triggered by link change
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: [RFC PATCH 0/3] usbnet: support runtime PM triggered by link change
- From: Oliver Neukum <oneukum@xxxxxxx>
- Re: [PATCH 00/34] i.MX multi-platform support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/8] usb/gadget: add some error recovery in afunc_bind()
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH 3/3] usb: gadget: port f_mass_storage to USB functions gadget
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH 2/3] usb: gadget: Add USB functions gadget
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [PATCH 1/3] usb: gadget: composite: export usb_remove_config
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- [RFC v2][PATCH 0/3] USB functions gadget
- From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
- RE: [PATCH 2/2] usb: phy: rename otg.c to phy.c
- From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
- Re: [PATCH 1/8] usb/gadget: add some error recovery in afunc_bind()
- From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
- Re: [RFC PATCH] drivers: phy: add generic PHY framework
- From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
- [PATCH 17/34] usb: ehci-mxc: remove unneeded mach/hardware.h inclusion
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- [PATCH 00/34] i.MX multi-platform support
- From: Shawn Guo <shawn.guo@xxxxxxxxxx>
- Re: [PATCH 2/2] usb: phy: rename otg.c to phy.c
- From: Fabio Estevam <festevam@xxxxxxxxx>
- [PATCH 2/2] usb: phy: rename otg.c to phy.c
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- [PATCH 1/2] usb: phy: rename enum usb_otg_state to usb_state
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- [PATCH 0/2] Some tiny changes for split phy from otg
- From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
- Re: usb3 writes fail with transcend rdf8 + ASMedia ASM1042 woes
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- RE: [RFC PATCH] drivers: phy: add generic PHY framework
- From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
- Re: Question regarding kernel 3.5 dropping support for usbfs
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH 7/8] usb/gadget: fix error path in uvc_function_bind()
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH 6/8] usb/gadget: free requests in pn_bind()'s error path
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH 8/8] usb/gadget: always update HS/SS descriptors and create a copy of them
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH 5/8] usb/gadget: make FS and HS available in f_midi
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH 2/8] usb/gadget: fix bind() error path in network gadgets
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH 3/8] usb/gadget: remove c->highpseed = true from f_mini and uac1
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH 4/8] usb/gadget: free hs descriptors in f_midi
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- [PATCH 1/8] usb/gadget: add some error recovery in afunc_bind()
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- gadget: fixes and create a copy of descriptors.
- From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
- Re: usb3 writes fail with transcend rdf8 + ASMedia ASM1042 woes
- From: Sami Farin <hvtaifwkbgefbaei@xxxxxxxxx>
- Re: Question regarding kernel 3.5 dropping support for usbfs
- From: Unknown <aahamlin@xxxxxxxxx>
- Re: How to associate lsusb bus/device with /dev entry?
- From: Peter Stuge <peter@xxxxxxxx>
- Re: Question regarding kernel 3.5 dropping support for usbfs
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Question regarding kernel 3.5 dropping support for usbfs
- From: Unknown <aahamlin@xxxxxxxxx>
- Re: How to associate lsusb bus/device with /dev entry?
- From: Peter Stuge <peter@xxxxxxxx>
- [RFC PATCH 3/3] usbnet: support runtime PM triggered by link change
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- [RFC PATCH 2/3] usbnet: apply usbnet_link_change
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- [RFC PATCH 1/3] usbnet: introduce usbnet_link_change API
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- [RFC PATCH 0/3] usbnet: support runtime PM triggered by link change
- From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
- Re: usb-audio: Increasing MAX_QUEUE to prevent hiccups in the audio stream?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- BEEMO(OPTION) alias PANTECH P4200 LTE-Modem
- From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
- usb-audio: Increasing MAX_QUEUE to prevent hiccups in the audio stream?
- From: Matthijs Kooijman <matthijs@xxxxxxxx>
- [PATCH] USB: remove CONFIG_EXPERIMENTAL dependancies
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: usb3 writes fail with transcend rdf8 + ASMedia ASM1042 woes
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Lifetime of descriptors in f_fs
- From: Michal Nazarewicz <mina86@xxxxxxxxxx>
- Re: [PATCH] usb: serial: ftdi_sio: option to hide selected interfaces of multiple interfaces convertes
- From: Robert Ryszard Paciorek <R.Paciorek@xxxxxxxxxx>
- Lifetime of descriptors in f_fs
- From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
- Re: XHCI: URB not cancelled during disconnect of a MSC device
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: Fresco Logic Problem
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: usb3 writes fail with transcend rdf8 + ASMedia ASM1042 woes
- From: Sami Farin <hvtaifwkbgefbaei@xxxxxxxxx>
- Re: Samsung SCX-3205 scanner does not work with Toshiba Satellite L855
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: XHCI: URB not cancelled during disconnect of a MSC device
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: usb3 writes fail with transcend rdf8 + ASMedia ASM1042 woes
- From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
- Re: f_uac2: why do you save two u8 in one u16?
- From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
- [PATCH] Increase XHCI suspend timeout to 16ms
- From: Michael Spang <spang@xxxxxxxxxxxx>
- RE: USB enumeration issue with wireless modem
- From: "Harris, Jeff" <Jeff_Harris@xxxxxxxxxxx>
- Re: USB problem on beagleboard clone
- From: Felipe Balbi <balbi@xxxxxx>
- Re: USB enumeration issue with wireless modem
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: USB enumeration issue with wireless modem
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] usb: serial: ftdi_sio: option to hide selected interfaces of multiple interfaces convertes
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- USB enumeration issue with wireless modem
- From: "Harris, Jeff" <Jeff_Harris@xxxxxxxxxxx>
- Re: [PATCH] staging: usbip: stub_dev: Fixed oops during removal of usbip_host
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
[Index of Archives]
[Linux USB Devel (old)]
[Linux Input]
[Linux SCSI]
[Samba]
[Yosemite News]
