Hi,
as requested by Greg Kroah-Hartman from
https://bugzilla.kernel.org/show_bug.cgi?id=47791, here I post the bug
report (it is a simple paste from the bugzilla):
AMD SB950 USB 2 don't work on kernel 3.x but worked on 2.6.x:
Tested with several kernels:
* 3.0
* most 3.2.x from debian wheezy
* 3.3.0
* 3.4
* 3.6RC6
* 2.6.30 - 2.6.32
USB 2 ports on the mainboard MSI 990XA-GD55 work with kernels 2.6 but
stop to
work with kernel 3.x.
USB 3 ports work well on both 2.6 and 3.x kernels.
Chipset on the mainboard is an AMD SB950.
I attached a file that reports outputs from: dmesg, lspci -vvv, lsusb -vvv,
/var/log/syslog and /var/log/messages.
The main output error when we plug an USB device into the USB 2 port is:
"usb 4-4: device descriptor read/64, error -32"
Tested with:
MSI 990XA-GD55 mainboard, AMD FX 4170 CPU, on Debian Wheezy.
Below are outputs from various logs and commands:
==========
output from: dmesg
==========
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-3-amd64 (Debian 3.2.23-1)
(debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 4.6.3 (Debian 4.6.3-8) )
#1 SMP Mon Jul 23 02:45:17 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-amd64
root=UUID=384fd2d2-1928-4790-938b-f9afa71d5524 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf019000 (usable)
[ 0.000000] BIOS-e820: 00000000cf019000 - 00000000cf0a2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cf0a2000 - 00000000cf0a9000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cf0a9000 - 00000000cf2b5000 (reserved)
[ 0.000000] BIOS-e820: 00000000cf2b5000 - 00000000cf2b6000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cf2b6000 - 00000000cf2c6000 (reserved)
[ 0.000000] BIOS-e820: 00000000cf2c6000 - 00000000cf2cd000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cf2cd000 - 00000000cf2f7000 (reserved)
[ 0.000000] BIOS-e820: 00000000cf2f7000 - 00000000cf4fa000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cf4fa000 - 00000000cf784000 (usable)
[ 0.000000] BIOS-e820: 00000000cf784000 - 00000000cfef6000 (reserved)
[ 0.000000] BIOS-e820: 00000000cfef6000 - 00000000cff00000 (usable)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec20000 - 00000000fec21000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100001000 - 000000022f000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: MSI MS-7640/990XA-GD55 (MS-7640), BIOS V22.0 08/25/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
(usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x22f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFF00000 mask FFFFFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000022f000000 aka 8944M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcff00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fcf40] fcf40
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff00000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff00000 page 4k
[ 0.000000] kernel direct mapping tables up to cff00000 @
1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000022f000000
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 022f000000 page 2M
[ 0.000000] kernel direct mapping tables up to 22f000000 @
cfefe000-cff00000
[ 0.000000] RAMDISK: 3750b000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000cf0a2068 0004C (v01 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000cf0a7e28 000F4 (v04 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero
address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560)
[ 0.000000] ACPI: DSDT 00000000cf0a2140 05CE2 (v02 ALASKA A M I
00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cf2c7f80 00040
[ 0.000000] ACPI: APIC 00000000cf0a7f20 0009E (v03 ALASKA A M I
01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000cf0a7fc0 0003C (v01 ALASKA A M I
01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 00000000cf0a8000 00038 (v01 ALASKA A M I
01072009 AMI 00000004)
[ 0.000000] ACPI: SSDT 00000000cf0a8038 00D40 (v01 AMD POWERNOW
00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000022f000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000022f000000
[ 0.000000] NODE_DATA [000000022effb000 - 000000022effffff]
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD ->
[ffff880226600000-ffff88022d7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0022f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000cf019
[ 0.000000] 0: 0x000cf4fa -> 0x000cf784
[ 0.000000] 0: 0x000cfef6 -> 0x000cff00
[ 0.000000] 0: 0x00100001 -> 0x0022f000
[ 0.000000] On node 0 totalpages: 2089529
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 830181 pages, LIFO batch:31
[ 0.000000] Normal zone: 16968 pages used for memmap
[ 0.000000] Normal zone: 1224119 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec20000, GSI
24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] PM: Registered nosave memory: 000000000009d000 -
000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cf019000 -
00000000cf0a2000
[ 0.000000] PM: Registered nosave memory: 00000000cf0a2000 -
00000000cf0a9000
[ 0.000000] PM: Registered nosave memory: 00000000cf0a9000 -
00000000cf2b5000
[ 0.000000] PM: Registered nosave memory: 00000000cf2b5000 -
00000000cf2b6000
[ 0.000000] PM: Registered nosave memory: 00000000cf2b6000 -
00000000cf2c6000
[ 0.000000] PM: Registered nosave memory: 00000000cf2c6000 -
00000000cf2cd000
[ 0.000000] PM: Registered nosave memory: 00000000cf2cd000 -
00000000cf2f7000
[ 0.000000] PM: Registered nosave memory: 00000000cf2f7000 -
00000000cf4fa000
[ 0.000000] PM: Registered nosave memory: 00000000cf784000 -
00000000cfef6000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 -
00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 -
00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 -
00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 -
00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 -
00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 -
00000000fec11000
[ 0.000000] PM: Registered nosave memory: 00000000fec11000 -
00000000fec20000
[ 0.000000] PM: Registered nosave memory: 00000000fec20000 -
00000000fec21000
[ 0.000000] PM: Registered nosave memory: 00000000fec21000 -
00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 -
00000000fed01000
[ 0.000000] PM: Registered nosave memory: 00000000fed01000 -
00000000fed61000
[ 0.000000] PM: Registered nosave memory: 00000000fed61000 -
00000000fed71000
[ 0.000000] PM: Registered nosave memory: 00000000fed71000 -
00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 -
00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 -
00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 -
0000000100000000
[ 0.000000] PM: Registered nosave memory: 0000000100000000 -
0000000100001000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap:
cff00000:28100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512
nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022ec00000 s82816
r8192 d23680 u262144
[ 0.000000] pcpu-alloc: s82816 r8192 d23680 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 2058220
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-amd64
root=UUID=384fd2d2-1928-4790-938b-f9afa71d5524 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ f8000000 size 64 MB
[ 0.000000] Memory: 8154752k/9158656k available (3409k kernel code,
800540k absent, 203364k reserved, 3324k data, 572k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:1288 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 4200.354 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using
timer frequency.. 8400.70 BogoMIPS (lpj=16801416)
[ 0.004005] pid_max: default: 32768 minimum: 301
[ 0.004036] Security Framework initialized
[ 0.004038] AppArmor: AppArmor disabled by boot time parameter
[ 0.004643] Dentry cache hash table entries: 1048576 (order: 11,
8388608 bytes)
[ 0.006532] Inode-cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.007323] Mount-cache hash table entries: 256
[ 0.007408] Initializing cgroup subsys cpuacct
[ 0.007412] Initializing cgroup subsys memory
[ 0.007422] Initializing cgroup subsys devices
[ 0.007424] Initializing cgroup subsys freezer
[ 0.007425] Initializing cgroup subsys net_cls
[ 0.007427] Initializing cgroup subsys blkio
[ 0.007432] Initializing cgroup subsys perf_event
[ 0.007452] tseg: 00cff00000
[ 0.007453] CPU: Physical Processor ID: 0
[ 0.007454] CPU: Processor Core ID: 0
[ 0.007455] mce: CPU supports 7 MCE banks
[ 0.007702] ACPI: Core revision 20110623
[ 0.012371] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.053480] CPU0: AMD FX(tm)-4170 Quad-Core Processor
stepping 02
[ 0.056003] Performance Events: AMD Family 15h PMU driver.
[ 0.056003] ... version: 0
[ 0.056003] ... bit width: 48
[ 0.056003] ... generic registers: 6
[ 0.056003] ... value mask: 0000ffffffffffff
[ 0.056003] ... max period: 00007fffffffffff
[ 0.056003] ... fixed-purpose events: 0
[ 0.056003] ... event mask: 000000000000003f
[ 0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.056003] Booting Node 0, Processors #1
[ 0.056003] smpboot cpu 1: start_ip = 98000
[ 0.144027] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.144118] #2
[ 0.144119] smpboot cpu 2: start_ip = 98000
[ 0.236025] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.236097] #3
[ 0.236098] smpboot cpu 3: start_ip = 98000
[ 0.328031] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.328043] Brought up 4 CPUs
[ 0.328045] Total of 4 processors activated (33601.48 BogoMIPS).
[ 0.332137] devtmpfs: initialized
[ 0.333818] PM: Registering ACPI NVS region at cf019000 (561152 bytes)
[ 0.333818] PM: Registering ACPI NVS region at cf2b5000 (4096 bytes)
[ 0.333818] PM: Registering ACPI NVS region at cf2c6000 (28672 bytes)
[ 0.333818] PM: Registering ACPI NVS region at cf2f7000 (2109440 bytes)
[ 0.333818] print_constraints: dummy:
[ 0.336072] NET: Registered protocol family 16
[ 0.336145] Extended Config Space enabled on 1 nodes
[ 0.336161] ACPI: bus type pci registered
[ 0.336207] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.336210] PCI: not using MMCONFIG
[ 0.336211] PCI: Using configuration type 1 for base access
[ 0.336212] PCI: Using configuration type 1 for extended access
[ 0.336755] bio: create slab <bio-0> at 0
[ 0.336755] ACPI: Added _OSI(Module Device)
[ 0.336755] ACPI: Added _OSI(Processor Device)
[ 0.336755] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.336755] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.336755] ACPI: EC: Look up EC in DSDT
[ 0.337169] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.352211] ACPI: Interpreter enabled
[ 0.352214] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.352232] ACPI: Using IOAPIC for interrupt routing
[ 0.352352] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.352384] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in
ACPI motherboard resources
[ 0.382502] ACPI: No dock devices found.
[ 0.382504] HEST: Table not found.
[ 0.382506] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.382652] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.382878] pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af]
[ 0.382880] pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0cf7]
[ 0.382882] pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03df]
[ 0.382883] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.382885] pci_root PNP0A03:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.382886] pci_root PNP0A03:00: host bridge window [mem
0x000c0000-0x000dffff]
[ 0.382888] pci_root PNP0A03:00: host bridge window [mem
0xd0000000-0xf7ffffff]
[ 0.382900] pci 0000:00:00.0: [1002:5a14] type 0 class 0x000600
[ 0.382952] pci 0000:00:03.0: [1002:5a17] type 1 class 0x000604
[ 0.382981] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.382983] pci 0000:00:03.0: PME# disabled
[ 0.382994] pci 0000:00:04.0: [1002:5a18] type 1 class 0x000604
[ 0.383021] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.383023] pci 0000:00:04.0: PME# disabled
[ 0.383034] pci 0000:00:05.0: [1002:5a19] type 1 class 0x000604
[ 0.383060] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.383062] pci 0000:00:05.0: PME# disabled
[ 0.383073] pci 0000:00:06.0: [1002:5a1a] type 1 class 0x000604
[ 0.383100] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.383102] pci 0000:00:06.0: PME# disabled
[ 0.383112] pci 0000:00:07.0: [1002:5a1b] type 1 class 0x000604
[ 0.383139] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.383141] pci 0000:00:07.0: PME# disabled
[ 0.383163] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.383176] pci 0000:00:11.0: reg 10: [io 0xf040-0xf047]
[ 0.383183] pci 0000:00:11.0: reg 14: [io 0xf030-0xf033]
[ 0.383190] pci 0000:00:11.0: reg 18: [io 0xf020-0xf027]
[ 0.383196] pci 0000:00:11.0: reg 1c: [io 0xf010-0xf013]
[ 0.383203] pci 0000:00:11.0: reg 20: [io 0xf000-0xf00f]
[ 0.383210] pci 0000:00:11.0: reg 24: [mem 0xf4107000-0xf41073ff]
[ 0.383252] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.383262] pci 0000:00:12.0: reg 10: [mem 0xf4106000-0xf4106fff]
[ 0.383312] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.383326] pci 0000:00:12.2: reg 10: [mem 0xf4105000-0xf41050ff]
[ 0.383383] pci 0000:00:12.2: supports D1 D2
[ 0.383384] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.383387] pci 0000:00:12.2: PME# disabled
[ 0.383403] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.383413] pci 0000:00:13.0: reg 10: [mem 0xf4104000-0xf4104fff]
[ 0.383463] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.383477] pci 0000:00:13.2: reg 10: [mem 0xf4103000-0xf41030ff]
[ 0.383534] pci 0000:00:13.2: supports D1 D2
[ 0.383535] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.383538] pci 0000:00:13.2: PME# disabled
[ 0.383553] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.383607] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.383661] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.383691] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.383700] pci 0000:00:14.5: reg 10: [mem 0xf4102000-0xf4102fff]
[ 0.383748] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.383758] pci 0000:00:16.0: reg 10: [mem 0xf4101000-0xf4101fff]
[ 0.383809] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.383822] pci 0000:00:16.2: reg 10: [mem 0xf4100000-0xf41000ff]
[ 0.383880] pci 0000:00:16.2: supports D1 D2
[ 0.383881] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.383884] pci 0000:00:16.2: PME# disabled
[ 0.383899] pci 0000:00:18.0: [1022:1600] type 0 class 0x000600
[ 0.383914] pci 0000:00:18.1: [1022:1601] type 0 class 0x000600
[ 0.383926] pci 0000:00:18.2: [1022:1602] type 0 class 0x000600
[ 0.383939] pci 0000:00:18.3: [1022:1603] type 0 class 0x000600
[ 0.383954] pci 0000:00:18.4: [1022:1604] type 0 class 0x000600
[ 0.383966] pci 0000:00:18.5: [1022:1605] type 0 class 0x000600
[ 0.384026] pci 0000:01:00.0: [10de:1201] type 0 class 0x000300
[ 0.384034] pci 0000:01:00.0: reg 10: [mem 0xf2000000-0xf3ffffff]
[ 0.384042] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff
64bit pref]
[ 0.384051] pci 0000:01:00.0: reg 1c: [mem 0xd8000000-0xdbffffff
64bit pref]
[ 0.384057] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
[ 0.384063] pci 0000:01:00.0: reg 30: [mem 0xf4000000-0xf407ffff pref]
[ 0.384113] pci 0000:01:00.1: [10de:0e0c] type 0 class 0x000403
[ 0.384121] pci 0000:01:00.1: reg 10: [mem 0xf4080000-0xf4083fff]
[ 0.392036] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.392039] pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
[ 0.392041] pci 0000:00:03.0: bridge window [mem 0xf2000000-0xf40fffff]
[ 0.392044] pci 0000:00:03.0: bridge window [mem
0xd0000000-0xdbffffff 64bit pref]
[ 0.392083] pci 0000:02:00.0: [1102:000b] type 0 class 0x000403
[ 0.392102] pci 0000:02:00.0: reg 10: [mem 0xf6200000-0xf620ffff 64bit]
[ 0.392116] pci 0000:02:00.0: reg 18: [mem 0xf6000000-0xf61fffff 64bit]
[ 0.392129] pci 0000:02:00.0: reg 20: [mem 0xf5000000-0xf5ffffff 64bit]
[ 0.400034] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.400038] pci 0000:00:04.0: bridge window [mem 0xf5000000-0xf62fffff]
[ 0.400082] pci 0000:04:00.0: [8086:10d3] type 0 class 0x000200
[ 0.400103] pci 0000:04:00.0: reg 10: [mem 0xf65c0000-0xf65dffff]
[ 0.400116] pci 0000:04:00.0: reg 14: [mem 0xf6500000-0xf657ffff]
[ 0.400129] pci 0000:04:00.0: reg 18: [io 0xc000-0xc01f]
[ 0.400143] pci 0000:04:00.0: reg 1c: [mem 0xf65e0000-0xf65e3fff]
[ 0.400179] pci 0000:04:00.0: reg 30: [mem 0xf6580000-0xf65bffff pref]
[ 0.400251] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.400256] pci 0000:04:00.0: PME# disabled
[ 0.408037] pci 0000:00:06.0: PCI bridge to [bus 04-04]
[ 0.408040] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
[ 0.408042] pci 0000:00:06.0: bridge window [mem 0xf6500000-0xf65fffff]
[ 0.408076] pci 0000:05:00.0: [1033:0194] type 0 class 0x000c03
[ 0.408090] pci 0000:05:00.0: reg 10: [mem 0xf6400000-0xf6401fff 64bit]
[ 0.408158] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.408161] pci 0000:05:00.0: PME# disabled
[ 0.416035] pci 0000:00:07.0: PCI bridge to [bus 05-05]
[ 0.416039] pci 0000:00:07.0: bridge window [mem 0xf6400000-0xf64fffff]
[ 0.416087] pci 0000:00:14.4: PCI bridge to [bus 06-06] (subtractive
decode)
[ 0.416095] pci 0000:00:14.4: bridge window [io 0x0000-0x03af]
(subtractive decode)
[ 0.416097] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7]
(subtractive decode)
[ 0.416098] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df]
(subtractive decode)
[ 0.416100] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 0.416102] pci 0000:00:14.4: bridge window [mem
0x000a0000-0x000bffff] (subtractive decode)
[ 0.416103] pci 0000:00:14.4: bridge window [mem
0x000c0000-0x000dffff] (subtractive decode)
[ 0.416105] pci 0000:00:14.4: bridge window [mem
0xd0000000-0xf7ffffff] (subtractive decode)
[ 0.420028] pci 0000:00:05.0: PCI bridge to [bus 07-ff]
[ 0.420031] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
[ 0.420034] pci 0000:00:05.0: bridge window [mem
0xdc100000-0xdc1fffff 64bit pref]
[ 0.420044] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.420167] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.420221] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC03._PRT]
[ 0.420247] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC04._PRT]
[ 0.420273] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC05._PRT]
[ 0.420300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC06._PRT]
[ 0.420326] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC07._PRT]
[ 0.420361] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.420363] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND),
returned control mask: 0x1d
[ 0.420365] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.427193] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.427242] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.427293] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.427343] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[ 0.427383] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[ 0.427414] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[ 0.427444] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[ 0.427474] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[ 0.427530] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.427530] vgaarb: loaded
[ 0.427530] vgaarb: bridge control possible 0000:01:00.0
[ 0.427530] PCI: Using ACPI for IRQ routing
[ 0.433487] PCI: pci_cache_line_size set to 64 bytes
[ 0.433551] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 0.433553] reserve RAM buffer: 00000000cf019000 - 00000000cfffffff
[ 0.433556] reserve RAM buffer: 00000000cf784000 - 00000000cfffffff
[ 0.433558] reserve RAM buffer: 00000000cff00000 - 00000000cfffffff
[ 0.433559] reserve RAM buffer: 000000022f000000 - 000000022fffffff
[ 0.433637] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.433639] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.435669] Switching to clocksource hpet
[ 0.435691] pnp: PnP ACPI init
[ 0.435691] ACPI: bus type pnp registered
[ 0.435691] pnp 00:00: [bus 00-ff]
[ 0.435691] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.435691] pnp 00:00: [io 0x0000-0x03af window]
[ 0.435691] pnp 00:00: [io 0x03e0-0x0cf7 window]
[ 0.435691] pnp 00:00: [io 0x03b0-0x03df window]
[ 0.435691] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.435691] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.435691] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.435691] pnp 00:00: [mem 0xd0000000-0xf7ffffff window]
[ 0.435691] pnp 00:00: [mem 0x00000000 window]
[ 0.435691] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.435691] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.435691] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.435691] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.435691] pnp 00:02: [io 0x040b]
[ 0.435691] pnp 00:02: [io 0x04d6]
[ 0.435691] pnp 00:02: [io 0x0c00-0x0c01]
[ 0.435691] pnp 00:02: [io 0x0c14]
[ 0.435691] pnp 00:02: [io 0x0c50-0x0c51]
[ 0.435691] pnp 00:02: [io 0x0c52]
[ 0.435691] pnp 00:02: [io 0x0c6c]
[ 0.435691] pnp 00:02: [io 0x0c6f]
[ 0.435691] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 0.435691] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 0.435691] pnp 00:02: [io 0x0cd4-0x0cd5]
[ 0.435691] pnp 00:02: [io 0x0cd6-0x0cd7]
[ 0.435691] pnp 00:02: [io 0x0cd8-0x0cdf]
[ 0.435691] pnp 00:02: [io 0x0800-0x089f]
[ 0.435691] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.435691] pnp 00:02: [io 0x0000-0x000f]
[ 0.435691] pnp 00:02: [io 0x0b20-0x0b3f]
[ 0.435691] pnp 00:02: [io 0x0900-0x090f]
[ 0.435691] pnp 00:02: [io 0x0910-0x091f]
[ 0.435691] pnp 00:02: [io 0xfe00-0xfefe]
[ 0.435691] pnp 00:02: [io 0x0060-0x005f disabled]
[ 0.435691] pnp 00:02: [io 0x0064-0x0063 disabled]
[ 0.435691] pnp 00:02: [io 0x0485-0x0486]
[ 0.435691] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[ 0.435691] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[ 0.435691] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
[ 0.435691] pnp 00:02: [mem 0xfed61000-0xfed70fff]
[ 0.435691] pnp 00:02: [mem 0xfec10000-0xfec10fff]
[ 0.435691] pnp 00:02: [mem 0xfed00000-0xfed00fff]
[ 0.435691] pnp 00:02: [mem 0xff800000-0xffffffff]
[ 0.435691] system 00:02: [io 0x040b] has been reserved
[ 0.435691] system 00:02: [io 0x04d6] has been reserved
[ 0.435691] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.435691] system 00:02: [io 0x0c14] has been reserved
[ 0.435691] system 00:02: [io 0x0c50-0x0c51] has been reserved
[ 0.435691] system 00:02: [io 0x0c52] has been reserved
[ 0.435691] system 00:02: [io 0x0c6c] has been reserved
[ 0.435691] system 00:02: [io 0x0c6f] has been reserved
[ 0.435691] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 0.435691] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 0.435691] system 00:02: [io 0x0cd4-0x0cd5] has been reserved
[ 0.435691] system 00:02: [io 0x0cd6-0x0cd7] has been reserved
[ 0.435691] system 00:02: [io 0x0cd8-0x0cdf] has been reserved
[ 0.435691] system 00:02: [io 0x0800-0x089f] has been reserved
[ 0.435691] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 0.435691] system 00:02: [io 0x0900-0x090f] has been reserved
[ 0.435691] system 00:02: [io 0x0910-0x091f] has been reserved
[ 0.435691] system 00:02: [io 0xfe00-0xfefe] has been reserved
[ 0.435691] system 00:02: [io 0x0485-0x0486] has been reserved
[ 0.435691] system 00:02: [mem 0xfec00000-0xfec00fff] could not be
reserved
[ 0.435691] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.435691] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.435691] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.435691] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.435691] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.435691] system 00:02: [mem 0xff800000-0xffffffff] has been reserved
[ 0.435691] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.435691] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
[ 0.435691] pnp 00:03: [io 0x0a00-0x0a0f]
[ 0.435691] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
[ 0.435691] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
[ 0.435691] system 00:03: [io 0x0a00-0x0a0f] has been reserved
[ 0.435691] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.435691] pnp 00:04: [dma 4]
[ 0.435691] pnp 00:04: [io 0x0000-0x000f]
[ 0.435691] pnp 00:04: [io 0x0081-0x0083]
[ 0.435691] pnp 00:04: [io 0x0087]
[ 0.435691] pnp 00:04: [io 0x0089-0x008b]
[ 0.435691] pnp 00:04: [io 0x008f]
[ 0.435691] pnp 00:04: [io 0x00c0-0x00df]
[ 0.435691] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.435691] pnp 00:05: [io 0x0070-0x0071]
[ 0.435691] pnp 00:05: [irq 8]
[ 0.435691] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.435691] pnp 00:06: [io 0x0061]
[ 0.435691] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.435691] pnp 00:07: [io 0x0010-0x001f]
[ 0.435691] pnp 00:07: [io 0x0022-0x003f]
[ 0.435691] pnp 00:07: [io 0x0044-0x005f]
[ 0.435691] pnp 00:07: [io 0x0062-0x0063]
[ 0.435691] pnp 00:07: [io 0x0065-0x006f]
[ 0.435691] pnp 00:07: [io 0x0072-0x007f]
[ 0.435691] pnp 00:07: [io 0x0080]
[ 0.435691] pnp 00:07: [io 0x0084-0x0086]
[ 0.435691] pnp 00:07: [io 0x0088]
[ 0.435691] pnp 00:07: [io 0x008c-0x008e]
[ 0.435691] pnp 00:07: [io 0x0090-0x009f]
[ 0.435691] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.435691] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.435691] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.435691] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.435691] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.435691] pnp 00:08: [io 0x00f0-0x00ff]
[ 0.435691] pnp 00:08: [irq 13]
[ 0.435691] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.435691] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.435691] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.435691] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.435691] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.435691] pnp 00:0b: [mem 0xfec20000-0xfec200ff]
[ 0.435691] system 00:0b: [mem 0xfec20000-0xfec200ff] could not be
reserved
[ 0.435691] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.435691] pnp 00:0c: [mem 0xfed00000-0xfed003ff]
[ 0.435691] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.435691] pnp: PnP ACPI: found 13 devices
[ 0.435691] ACPI: ACPI bus type pnp unregistered
[ 0.441454] PCI: max bus depth: 1 pci_try_num: 2
[ 0.441471] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.441473] pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
[ 0.441476] pci 0000:00:03.0: bridge window [mem 0xf2000000-0xf40fffff]
[ 0.441478] pci 0000:00:03.0: bridge window [mem
0xd0000000-0xdbffffff 64bit pref]
[ 0.441481] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.441483] pci 0000:00:04.0: bridge window [mem 0xf5000000-0xf62fffff]
[ 0.441486] pci 0000:00:05.0: PCI bridge to [bus 07-07]
[ 0.441488] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
[ 0.441491] pci 0000:00:05.0: bridge window [mem
0xdc100000-0xdc1fffff 64bit pref]
[ 0.441493] pci 0000:00:06.0: PCI bridge to [bus 04-04]
[ 0.441495] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
[ 0.441497] pci 0000:00:06.0: bridge window [mem 0xf6500000-0xf65fffff]
[ 0.441500] pci 0000:00:07.0: PCI bridge to [bus 05-05]
[ 0.441503] pci 0000:00:07.0: bridge window [mem 0xf6400000-0xf64fffff]
[ 0.441506] pci 0000:00:14.4: PCI bridge to [bus 06-06]
[ 0.441520] pci 0000:00:03.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
[ 0.441523] pci 0000:00:03.0: setting latency timer to 64
[ 0.441526] pci 0000:00:04.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
[ 0.441528] pci 0000:00:04.0: setting latency timer to 64
[ 0.441531] pci 0000:00:05.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
[ 0.441533] pci 0000:00:05.0: setting latency timer to 64
[ 0.441538] pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 0.441540] pci 0000:00:06.0: setting latency timer to 64
[ 0.441543] pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 0.441545] pci 0000:00:07.0: setting latency timer to 64
[ 0.441550] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.441551] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.441553] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.441554] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.441556] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.441557] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.441558] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xf7ffffff]
[ 0.441560] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.441561] pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf40fffff]
[ 0.441563] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdbffffff
64bit pref]
[ 0.441564] pci_bus 0000:02: resource 1 [mem 0xf5000000-0xf62fffff]
[ 0.441566] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
[ 0.441567] pci_bus 0000:07: resource 2 [mem 0xdc100000-0xdc1fffff
64bit pref]
[ 0.441569] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.441570] pci_bus 0000:04: resource 1 [mem 0xf6500000-0xf65fffff]
[ 0.441572] pci_bus 0000:05: resource 1 [mem 0xf6400000-0xf64fffff]
[ 0.441574] pci_bus 0000:06: resource 4 [io 0x0000-0x03af]
[ 0.441575] pci_bus 0000:06: resource 5 [io 0x03e0-0x0cf7]
[ 0.441576] pci_bus 0000:06: resource 6 [io 0x03b0-0x03df]
[ 0.441578] pci_bus 0000:06: resource 7 [io 0x0d00-0xffff]
[ 0.441579] pci_bus 0000:06: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.441581] pci_bus 0000:06: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.441582] pci_bus 0000:06: resource 10 [mem 0xd0000000-0xf7ffffff]
[ 0.441659] NET: Registered protocol family 2
[ 0.441862] IP route cache hash table entries: 262144 (order: 9,
2097152 bytes)
[ 0.442873] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 0.444458] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.444647] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.444648] TCP reno registered
[ 0.444661] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.444697] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.444819] NET: Registered protocol family 1
[ 0.444846] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.528023] pci 0000:00:12.0: PCI INT A disabled
[ 0.528034] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.528060] pci 0000:00:12.2: PCI INT B disabled
[ 0.528065] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.608022] pci 0000:00:13.0: PCI INT A disabled
[ 0.608030] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.608055] pci 0000:00:13.2: PCI INT B disabled
[ 0.608065] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.688023] pci 0000:00:14.5: PCI INT C disabled
[ 0.688030] pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.768022] pci 0000:00:16.0: PCI INT A disabled
[ 0.768029] pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.768055] pci 0000:00:16.2: PCI INT B disabled
[ 0.768075] pci 0000:01:00.0: Boot video device
[ 0.768096] pci 0000:05:00.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50
[ 0.768119] pci 0000:05:00.0: PCI INT A disabled
[ 0.768121] PCI: CLS 64 bytes, default 64
[ 0.768162] Unpacking initramfs...
[ 0.941262] Freeing initrd memory: 11156k freed
[ 0.943733] PCI-DMA: Disabling AGP.
[ 0.943796] PCI-DMA: aperture base @ f8000000 size 65536 KB
[ 0.943798] init_memory_mapping: 00000000f8000000-00000000fc000000
[ 0.943800] 00f8000000 - 00fc000000 page 2M
[ 0.943803] PCI-DMA: using GART IOMMU.
[ 0.943805] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.947370] perf: AMD IBS detected (0x000000ff)
[ 0.947523] audit: initializing netlink socket (disabled)
[ 0.947535] type=2000 audit(1348298373.940:1): initialized
[ 0.968427] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.992729] VFS: Disk quotas dquot_6.5.2
[ 0.992760] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.992817] msgmni has been set to 16077
[ 0.992971] alg: No test for stdrng (krng)
[ 0.993002] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.993004] io scheduler noop registered
[ 0.993005] io scheduler deadline registered
[ 0.993028] io scheduler cfq registered (default)
[ 0.993202] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.993221] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.993222] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.993451] ERST: Table is not found!
[ 0.993452] GHES: HEST is not enabled!
[ 0.993506] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.172307] Linux agpgart interface v0.103
[ 1.172388] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.172701] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.172706] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.172798] mousedev: PS/2 mouse device common for all mice
[ 1.172823] rtc_cmos 00:05: RTC can wake from S4
[ 1.172905] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.172923] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.172932] cpuidle: using governor ladder
[ 1.172934] cpuidle: using governor menu
[ 1.173070] TCP cubic registered
[ 1.173137] NET: Registered protocol family 10
[ 1.173491] Mobile IPv6
[ 1.173493] NET: Registered protocol family 17
[ 1.173496] Registering the dns_resolver key type
[ 1.173594] PM: Hibernation image not present or could not be loaded.
[ 1.173600] registered taskstats version 1
[ 1.185896] rtc_cmos 00:05: setting system clock to 2012-09-22
07:19:35 UTC (1348298375)
[ 1.185951] Initializing network drop monitor service
[ 1.186775] Freeing unused kernel memory: 572k freed
[ 1.186868] Write protecting the kernel read-only data: 6144k
[ 1.188671] Freeing unused kernel memory: 668k freed
[ 1.190547] Freeing unused kernel memory: 684k freed
[ 1.234649] udevd[66]: starting version 175
[ 1.250603] usbcore: registered new interface driver usbfs
[ 1.250623] usbcore: registered new interface driver hub
[ 1.253152] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 1.253154] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 1.253175] e1000e 0000:04:00.0: Disabling ASPM L0s L1
[ 1.253194] e1000e 0000:04:00.0: PCI INT A -> GSI 51 (level, low) ->
IRQ 51
[ 1.253210] e1000e 0000:04:00.0: setting latency timer to 64
[ 1.253364] e1000e 0000:04:00.0: irq 72 for MSI/MSI-X
[ 1.253369] e1000e 0000:04:00.0: irq 73 for MSI/MSI-X
[ 1.253373] e1000e 0000:04:00.0: irq 74 for MSI/MSI-X
[ 1.257530] SCSI subsystem initialized
[ 1.260741] usbcore: registered new device driver usb
[ 1.261258] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.261279] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low)
-> IRQ 17
[ 1.261296] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.261315] ehci_hcd 0000:00:12.2: new USB bus registered, assigned
bus number 1
[ 1.261324] ehci_hcd 0000:00:12.2: applying AMD
SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.261345] QUIRK: Enable AMD PLL fix
[ 1.261354] ehci_hcd 0000:00:12.2: debug port 1
[ 1.261376] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf4105000
[ 1.263231] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 50 (level, low)
-> IRQ 50
[ 1.263247] xhci_hcd 0000:05:00.0: setting latency timer to 64
[ 1.263250] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1.263258] xhci_hcd 0000:05:00.0: new USB bus registered, assigned
bus number 2
[ 1.263375] xhci_hcd 0000:05:00.0: irq 50, io mem 0xf6400000
[ 1.263414] xhci_hcd 0000:05:00.0: irq 75 for MSI/MSI-X
[ 1.263421] xhci_hcd 0000:05:00.0: irq 76 for MSI/MSI-X
[ 1.263427] xhci_hcd 0000:05:00.0: irq 77 for MSI/MSI-X
[ 1.263431] xhci_hcd 0000:05:00.0: irq 78 for MSI/MSI-X
[ 1.263435] xhci_hcd 0000:05:00.0: irq 79 for MSI/MSI-X
[ 1.263501] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.263504] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.263506] usb usb2: Product: xHCI Host Controller
[ 1.263508] usb usb2: Manufacturer: Linux 3.2.0-3-amd64 xhci_hcd
[ 1.263510] usb usb2: SerialNumber: 0000:05:00.0
[ 1.263580] xHCI xhci_add_endpoint called for root hub
[ 1.263582] xHCI xhci_check_bandwidth called for root hub
[ 1.263610] hub 2-0:1.0: USB hub found
[ 1.263615] hub 2-0:1.0: 2 ports detected
[ 1.263669] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1.263675] xhci_hcd 0000:05:00.0: new USB bus registered, assigned
bus number 3
[ 1.266837] libata version 3.00 loaded.
[ 1.266858] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.266861] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.266863] usb usb3: Product: xHCI Host Controller
[ 1.266865] usb usb3: Manufacturer: Linux 3.2.0-3-amd64 xhci_hcd
[ 1.266866] usb usb3: SerialNumber: 0000:05:00.0
[ 1.266936] xHCI xhci_add_endpoint called for root hub
[ 1.266938] xHCI xhci_check_bandwidth called for root hub
[ 1.266969] hub 3-0:1.0: USB hub found
[ 1.266975] hub 3-0:1.0: 2 ports detected
[ 1.272055] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.272076] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.272078] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.272080] usb usb1: Product: EHCI Host Controller
[ 1.272082] usb usb1: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
[ 1.272083] usb usb1: SerialNumber: 0000:00:12.2
[ 1.272191] hub 1-0:1.0: USB hub found
[ 1.272201] hub 1-0:1.0: 5 ports detected
[ 1.272269] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low)
-> IRQ 17
[ 1.272291] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.272297] ehci_hcd 0000:00:13.2: new USB bus registered, assigned
bus number 4
[ 1.272305] ehci_hcd 0000:00:13.2: applying AMD
SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.272323] ehci_hcd 0000:00:13.2: debug port 1
[ 1.272334] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf4103000
[ 1.276817] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 1.284034] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.284058] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.284060] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.284062] usb usb4: Product: EHCI Host Controller
[ 1.284064] usb usb4: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
[ 1.284066] usb usb4: SerialNumber: 0000:00:13.2
[ 1.284164] hub 4-0:1.0: USB hub found
[ 1.284168] hub 4-0:1.0: 5 ports detected
[ 1.284241] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low)
-> IRQ 17
[ 1.284265] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.284272] ehci_hcd 0000:00:16.2: new USB bus registered, assigned
bus number 5
[ 1.284279] ehci_hcd 0000:00:16.2: applying AMD
SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.284295] ehci_hcd 0000:00:16.2: debug port 1
[ 1.284308] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf4100000
[ 1.284595] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.296049] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.296066] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.296068] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.296070] usb usb5: Product: EHCI Host Controller
[ 1.296072] usb usb5: Manufacturer: Linux 3.2.0-3-amd64 ehci_hcd
[ 1.296073] usb usb5: SerialNumber: 0000:00:16.2
[ 1.296325] hub 5-0:1.0: USB hub found
[ 1.296328] hub 5-0:1.0: 4 ports detected
[ 1.296386] ahci 0000:00:11.0: version 3.0
[ 1.296402] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.296502] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps
0x3f impl SATA mode
[ 1.296505] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo
pmp pio slum part
[ 1.297096] scsi0 : ahci
[ 1.297181] scsi1 : ahci
[ 1.297243] scsi2 : ahci
[ 1.297302] scsi3 : ahci
[ 1.297363] scsi4 : ahci
[ 1.297422] scsi5 : ahci
[ 1.297462] ata1: SATA max UDMA/133 abar m1024@0xf4107000 port
0xf4107100 irq 19
[ 1.297465] ata2: SATA max UDMA/133 abar m1024@0xf4107000 port
0xf4107180 irq 19
[ 1.297467] ata3: SATA max UDMA/133 abar m1024@0xf4107000 port
0xf4107200 irq 19
[ 1.297469] ata4: SATA max UDMA/133 abar m1024@0xf4107000 port
0xf4107280 irq 19
[ 1.297471] ata5: SATA max UDMA/133 abar m1024@0xf4107000 port
0xf4107300 irq 19
[ 1.297473] ata6: SATA max UDMA/133 abar m1024@0xf4107000 port
0xf4107380 irq 19
[ 1.297500] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low)
-> IRQ 18
[ 1.297521] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.297531] ohci_hcd 0000:00:12.0: new USB bus registered, assigned
bus number 6
[ 1.297558] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf4106000
[ 1.356029] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.356031] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.356033] usb usb6: Product: OHCI Host Controller
[ 1.356034] usb usb6: Manufacturer: Linux 3.2.0-3-amd64 ohci_hcd
[ 1.356035] usb usb6: SerialNumber: 0000:00:12.0
[ 1.356141] hub 6-0:1.0: USB hub found
[ 1.356150] hub 6-0:1.0: 5 ports detected
[ 1.356324] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low)
-> IRQ 18
[ 1.356350] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.356356] ohci_hcd 0000:00:13.0: new USB bus registered, assigned
bus number 7
[ 1.356373] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf4104000
[ 1.359187] e1000e 0000:04:00.0: eth0: (PCI Express:2.5GT/s:Width x1)
68:05:ca:07:de:2d
[ 1.359189] e1000e 0000:04:00.0: eth0: Intel(R) PRO/1000 Network
Connection
[ 1.359200] e1000e 0000:04:00.0: eth0: MAC: 3, PHY: 8, PBA No: E46981-007
[ 1.416016] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.416019] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.416020] usb usb7: Product: OHCI Host Controller
[ 1.416021] usb usb7: Manufacturer: Linux 3.2.0-3-amd64 ohci_hcd
[ 1.416023] usb usb7: SerialNumber: 0000:00:13.0
[ 1.416107] hub 7-0:1.0: USB hub found
[ 1.416111] hub 7-0:1.0: 5 ports detected
[ 1.416160] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 1.416172] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.416177] ohci_hcd 0000:00:14.5: new USB bus registered, assigned
bus number 8
[ 1.416189] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf4102000
[ 1.476032] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.476034] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.476036] usb usb8: Product: OHCI Host Controller
[ 1.476037] usb usb8: Manufacturer: Linux 3.2.0-3-amd64 ohci_hcd
[ 1.476038] usb usb8: SerialNumber: 0000:00:14.5
[ 1.476119] hub 8-0:1.0: USB hub found
[ 1.476123] hub 8-0:1.0: 2 ports detected
[ 1.476169] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low)
-> IRQ 18
[ 1.476181] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.476186] ohci_hcd 0000:00:16.0: new USB bus registered, assigned
bus number 9
[ 1.476197] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf4101000
[ 1.536043] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.536045] usb usb9: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.536046] usb usb9: Product: OHCI Host Controller
[ 1.536047] usb usb9: Manufacturer: Linux 3.2.0-3-amd64 ohci_hcd
[ 1.536049] usb usb9: SerialNumber: 0000:00:16.0
[ 1.536126] hub 9-0:1.0: USB hub found
[ 1.536130] hub 9-0:1.0: 4 ports detected
[ 1.572041] usb 2-1: new full-speed USB device number 2 using xhci_hcd
[ 1.597849] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
[ 1.599848] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
[ 1.601848] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
[ 1.617853] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 1.624850] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 1.628853] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 1.629860] usb 2-1: New USB device found, idVendor=1532, idProduct=002f
[ 1.629862] usb 2-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 1.629864] usb 2-1: Product: Razer Imperator
[ 1.629865] usb 2-1: Manufacturer: Razer
[ 1.690978] input: Razer Razer Imperator as
/devices/pci0000:00/0000:00:07.0/0000:05:00.0/usb2/2-1/2-1:1.0/input/input0
[ 1.691044] generic-usb 0003:1532:002F.0001: input,hidraw0: USB HID
v1.11 Mouse [Razer Razer Imperator] on usb-0000:05:00.0-1/input0
[ 1.710851] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
[ 1.712851] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
[ 1.714850] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
[ 1.714955] input: Razer Razer Imperator as
/devices/pci0000:00/0000:00:07.0/0000:05:00.0/usb2/2-1/2-1:1.1/input/input1
[ 1.715004] generic-usb 0003:1532:002F.0002: input,hidraw1: USB HID
v1.11 Keyboard [Razer Razer Imperator] on usb-0000:05:00.0-1/input1
[ 1.715016] usbcore: registered new interface driver usbhid
[ 1.715017] usbhid: USB HID core driver
[ 1.744029] usb 2-2: new low-speed USB device number 3 using xhci_hcd
[ 1.783931] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 1.788043] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.788063] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.788082] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.788795] ata1.00: ATA-8: ST2000DL003-9VT166, CC3C, max UDMA/133
[ 1.788798] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth
31/32)
[ 1.789589] ata1.00: configured for UDMA/133
[ 1.789698] scsi 0:0:0:0: Direct-Access ATA ST2000DL003-9VT1
CC3C PQ: 0 ANSI: 5
[ 1.789916] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 1.791464] ata5.00: ATAPI: HL-DT-ST DVDRAM GH22NS90, HN00S300, max
UDMA/100
[ 1.792026] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.792041] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.792337] ata6.00: ATA-8: WDC WD30EZRX-00MMMB0, 80.00A80, max UDMA/133
[ 1.792339] ata6.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 1.792825] ata5.00: configured for UDMA/100
[ 1.793451] ata4.00: ATA-8: MAXTOR STM3500320AS, MX15, max UDMA/133
[ 1.793453] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.794916] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 1.795250] ata4.00: configured for UDMA/133
[ 1.795924] usb 2-2: New USB device found, idVendor=046d, idProduct=c31d
[ 1.795926] usb 2-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 1.795927] usb 2-2: Product: USB Keyboard
[ 1.795928] usb 2-2: Manufacturer: Logitech
[ 1.795993] usb 2-2: ep 0x81 - rounding interval to 64 microframes,
ep desc says 80 microframes
[ 1.795996] usb 2-2: ep 0x82 - rounding interval to 1024 microframes,
ep desc says 2040 microframes
[ 1.796347] ata6.00: configured for UDMA/133
[ 1.798456] ata2.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 1.798459] ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 1.802923] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 1.804930] ata2.00: configured for UDMA/133
[ 1.805017] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD154UI
1AG0 PQ: 0 ANSI: 5
[ 1.808924] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 1.823065] input: Logitech USB Keyboard as
/devices/pci0000:00/0000:00:07.0/0000:05:00.0/usb2/2-2/2-2:1.0/input/input2
[ 1.823109] generic-usb 0003:046D:C31D.0003: input,hidraw2: USB HID
v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:05:00.0-2/input0
[ 1.830922] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 1.857923] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 1.860924] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 1.863933] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 1.864971] input: Logitech USB Keyboard as
/devices/pci0000:00/0000:00:07.0/0000:05:00.0/usb2/2-2/2-2:1.1/input/input3
[ 1.865015] generic-usb 0003:046D:C31D.0004: input,hidraw3: USB HID
v1.10 Device [Logitech USB Keyboard] on usb-0000:05:00.0-2/input1
[ 1.944023] Refined TSC clocksource calibration: 4200.272 MHz.
[ 1.944031] Switching to clocksource tsc
[ 1.960026] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.960815] ata3.00: ATA-8: WDC WD10EACS-00D6B0, 01.01A01, max UDMA/133
[ 1.960817] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 1.961663] ata3.00: configured for UDMA/133
[ 1.961742] scsi 2:0:0:0: Direct-Access ATA WDC WD10EACS-00D
01.0 PQ: 0 ANSI: 5
[ 1.961892] scsi 3:0:0:0: Direct-Access ATA MAXTOR STM350032
MX15 PQ: 0 ANSI: 5
[ 1.965032] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS90
HN00 PQ: 0 ANSI: 5
[ 1.965182] scsi 5:0:0:0: Direct-Access ATA WDC WD30EZRX-00M
80.0 PQ: 0 ANSI: 5
[ 1.970503] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks:
(2.00 TB/1.81 TiB)
[ 1.970505] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.970509] sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks:
(1.50 TB/1.36 TiB)
[ 1.970557] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.970560] sd 0:0:0:0: [sda] Write Protect is off
[ 1.970562] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.970566] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.970581] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.970586] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.970985] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks:
(1.00 TB/931 GiB)
[ 1.971029] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.971031] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.971049] sd 2:0:0:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.971269] sd 3:0:0:0: [sdd] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 1.971313] sd 3:0:0:0: [sdd] Write Protect is off
[ 1.971315] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.971333] sd 3:0:0:0: [sdd] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.971576] sd 5:0:0:0: [sde] 5860533168 512-byte logical blocks:
(3.00 TB/2.72 TiB)
[ 1.971579] sd 5:0:0:0: [sde] 4096-byte physical blocks
[ 1.971619] sd 5:0:0:0: [sde] Write Protect is off
[ 1.971621] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 1.971637] sd 5:0:0:0: [sde] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.972814] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.972850] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.972888] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.972922] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.972956] scsi 4:0:0:0: Attached scsi generic sg4 type 5
[ 1.972999] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 1.973088] sdb: sdb1
[ 1.973283] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.980710] sdd: sdd1
[ 1.980906] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 1.995630] sdc: sdc1
[ 1.995801] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 2.020382] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10
sda11 sda12 sda13 sda14 sda15
[ 2.020945] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.415018] sde: sde1 sde2 sde3 sde4
[ 2.415315] sd 5:0:0:0: [sde] Attached SCSI disk
[ 2.420834] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 2.420836] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.420938] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.019233] PM: Starting manual resume from disk
[ 4.019236] PM: Hibernation image partition 8:2 present
[ 4.019237] PM: Looking for hibernation image.
[ 4.046414] PM: Image not found (code -22)
[ 4.046416] PM: Hibernation image not present or could not be loaded.
[ 4.052957] SGI XFS with ACLs, security attributes, realtime, large
block/inode numbers, no debug enabled
[ 4.053232] SGI XFS Quota Management subsystem
[ 4.054404] XFS (sda3): Mounting Filesystem
[ 4.158156] XFS (sda3): Ending clean mount
[ 5.236510] udevd[458]: starting version 175
[ 5.627251] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 5.627256] ACPI: Power Button [PWRB]
[ 5.627299] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 5.627302] ACPI: Power Button [PWRF]
[ 5.636650] ACPI: acpi_idle registered with cpuidle
[ 5.645749] wmi: Mapper loaded
[ 5.682436] powernow-k8: Found 1 AMD FX(tm)-4170 Quad-Core Processor
(4 cpu cores) (version 2.20.00)
[ 5.682447] powernow-k8: Core Performance Boosting: on.
[ 5.682492] powernow-k8: 0 : pstate 0 (4200 MHz)
[ 5.682493] powernow-k8: 1 : pstate 1 (4100 MHz)
[ 5.682494] powernow-k8: 2 : pstate 2 (3700 MHz)
[ 5.682495] powernow-k8: 3 : pstate 3 (2900 MHz)
[ 5.682496] powernow-k8: 4 : pstate 4 (2100 MHz)
[ 5.682497] powernow-k8: 5 : pstate 5 (1400 MHz)
[ 5.731323] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 5.839745] EDAC MC: Ver: 2.1.0
[ 5.957162] MCE: In-kernel MCE decoding enabled.
[ 5.958540] AMD64 EDAC driver v3.4.0
[ 5.958652] EDAC amd64: DRAM ECC disabled.
[ 5.958669] EDAC amd64: ECC disabled in the BIOS or no ECC
capability, module will not load.
[ 5.958672] Either enable ECC checking or force module loading by
setting 'ecc_enable_override'.
[ 5.958674] (Note that use of the override may cause unknown side
effects.)
[ 6.135169] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00,
revision 0
[ 6.179229] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 6.179355] SP5100 TCO timer: mmio address 0xbafe00 already in use
[ 6.372184] nvidia: module license 'NVIDIA' taints kernel.
[ 6.372190] Disabling lock debugging due to kernel taint
[ 6.555586] nvidia 0000:01:00.0: PCI INT A -> GSI 28 (level, low) ->
IRQ 28
[ 6.555593] nvidia 0000:01:00.0: setting latency timer to 64
[ 6.555596] vgaarb: device changed decodes:
PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 6.555707] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 302.17
Tue Jun 12 16:03:22 PDT 2012
[ 6.571381] snd_ctxfi 0000:02:00.0: PCI INT A -> GSI 44 (level, low)
-> IRQ 44
[ 6.572250] snd_ctxfi 0000:02:00.0: setting latency timer to 64
[ 9.009251] Adding 3906244k swap on /dev/sda2. Priority:-1 extents:1
across:3906244k
[ 9.827522] device-mapper: uevent: version 1.0.3
[ 9.827671] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19)
initialised: dm-devel@xxxxxxxxxx
[ 9.944321] loop: module loaded
[ 9.986256] f71882fg: Found f71889a chip at 0x480, revision 49
[ 9.986530] f71882fg f71882fg.1152: Fan: 1 is in duty-cycle mode
[ 9.986610] f71882fg f71882fg.1152: Fan: 2 is in duty-cycle mode
[ 9.986729] f71882fg f71882fg.1152: Fan: 3 is in duty-cycle mode
[ 11.467069] XFS (sda5): Mounting Filesystem
[ 11.711797] XFS (sda5): Ending clean mount
[ 11.758999] XFS (sda11): Mounting Filesystem
[ 11.886912] XFS (sda11): Ending clean mount
[ 12.000391] XFS (sda10): Mounting Filesystem
[ 12.154873] XFS (sda10): Ending clean mount
[ 12.222153] XFS (sda12): Mounting Filesystem
[ 12.360111] XFS (sda12): Ending clean mount
[ 12.423230] XFS (sda9): Mounting Filesystem
[ 12.529115] XFS (sda9): Ending clean mount
[ 12.587614] XFS (sda4): Mounting Filesystem
[ 12.677550] XFS (sda4): Ending clean mount
[ 12.743291] XFS (sda6): Mounting Filesystem
[ 12.835955] XFS (sda6): Ending clean mount
[ 12.891104] XFS (sda7): Mounting Filesystem
[ 12.978670] XFS (sda7): Ending clean mount
[ 13.044916] XFS (sda8): Mounting Filesystem
[ 13.190196] XFS (sda8): Ending clean mount
[ 13.236447] XFS (sda14): Mounting Filesystem
[ 13.352863] XFS (sda14): Ending clean mount
[ 13.380494] XFS (sda15): Mounting Filesystem
[ 13.560058] XFS (sda15): Ending clean mount
[ 13.560953] XFS (sdd1): Mounting Filesystem
[ 13.737997] XFS (sdd1): Ending clean mount
[ 13.738564] XFS (sde2): Mounting Filesystem
[ 13.868243] XFS (sde2): Ending clean mount
[ 13.868706] XFS (sde3): Mounting Filesystem
[ 13.984628] XFS (sde3): Ending clean mount
[ 15.826358] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.757516] fuse init (API version 7.17)
[ 18.435320] thinkpad_ec: no ThinkPad embedded controller!
[ 18.873069] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: Rx/Tx
[ 18.874826] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 30.592846] lp: driver loaded but no devices found
[ 30.707567] ppdev: user-space parallel port driver
[ 31.331954] FS-Cache: Loaded
[ 31.346505] FS-Cache: Netfs 'cifs' registered for caching
[ 32.669025] CIFS VFS: default security mechanism requested. The
default security mechanism will be upgraded from ntlm to ntlmv2 in
kernel release 3.3
[ 762.304127] usb 4-4: new high-speed USB device number 2 using ehci_hcd
[ 762.416154] usb 4-4: device descriptor read/64, error -32
[ 762.632127] usb 4-4: device descriptor read/64, error -32
[ 762.848112] usb 4-4: new high-speed USB device number 3 using ehci_hcd
[ 762.960111] usb 4-4: device descriptor read/64, error -32
[ 763.176186] usb 4-4: device descriptor read/64, error -32
[ 763.392185] usb 4-4: new high-speed USB device number 4 using ehci_hcd
[ 763.800176] usb 4-4: device not accepting address 4, error -32
[ 763.912182] usb 4-4: new high-speed USB device number 5 using ehci_hcd
[ 764.320172] usb 4-4: device not accepting address 5, error -32
[ 764.320195] hub 4-0:1.0: unable to enumerate USB device on port 4
[ 764.652124] usb 7-4: new full-speed USB device number 2 using ohci_hcd
[ 764.792122] usb 7-4: device descriptor read/64, error -32
[ 765.036105] usb 7-4: device descriptor read/64, error -32
[ 765.276182] usb 7-4: new full-speed USB device number 3 using ohci_hcd
[ 765.416182] usb 7-4: device descriptor read/64, error -32
[ 765.660182] usb 7-4: device descriptor read/64, error -32
[ 765.900184] usb 7-4: new full-speed USB device number 4 using ohci_hcd
[ 766.308173] usb 7-4: device not accepting address 4, error -32
[ 766.444140] usb 7-4: new full-speed USB device number 5 using ohci_hcd
[ 766.852174] usb 7-4: device not accepting address 5, error -32
[ 766.852219] hub 7-0:1.0: unable to enumerate USB device on port 4
==========
output from: lspci -vvv
==========
00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to
PCI bridge (external gfx0 port B) (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device 7640
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx+
Capabilities: <access denied>
00:03.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to
PCI bridge (PCI express gpp port C) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f2000000-f40fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to
PCI bridge (PCI express gpp port D) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f5000000-f62fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to
PCI bridge (PCI express gpp port E) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000dc100000-00000000dc1fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to
PCI bridge (PCI express gpp port F) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f6500000-f65fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD890 PCI to
PCI bridge (PCI express gpp port G) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f6400000-f64fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI
1.0])
Subsystem: Micro-Star International Co., Ltd. Device 7640
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at f040 [size=8]
Region 1: I/O ports at f030 [size=4]
Region 2: I/O ports at f020 [size=8]
Region 3: I/O ports at f010 [size=4]
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at f4107000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device 7640
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f4106000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device 7640
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f4105000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device 7640
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f4104000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device 7640
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f4103000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus
Controller (rev 42)
Subsystem: Micro-Star International Co., Ltd. Device 7640
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: piix4_smbus
00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
Subsystem: Micro-Star International Co., Ltd. Device 7640
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to
PCI Bridge (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=06, subordinate=06, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI2 Controller (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device 7640
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f4102000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:16.0 USB controller: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device 7640
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f4101000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:16.2 USB controller: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device 7640
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f4100000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor
Function 0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor
Function 1
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor
Function 2
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor
Function 3
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor
Function 4
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: fam15h_power
00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 15h Processor
Function 5
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
01:00.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX
560] (rev a1) (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f2000000 (32-bit, non-prefetchable) [size=32M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at d8000000 (64-bit, prefetchable) [size=64M]
Region 5: I/O ports at e000 [size=128]
[virtual] Expansion ROM at f4000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
01:00.1 Audio device: NVIDIA Corporation GF110 High Definition Audio
Controller (rev a1)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 10
Region 0: Memory at f4080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
02:00.0 Audio device: Creative Labs X-Fi Titanium series [EMU20k2] (rev 04)
Subsystem: Creative Labs SB X-Fi Titanium PCI-e [SB0880]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f6200000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at f6000000 (64-bit, non-prefetchable) [size=2M]
Region 4: Memory at f5000000 (64-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: snd_ctxfi
04:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network
Connection
Subsystem: Intel Corporation Gigabit CT Desktop Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 51
Region 0: Memory at f65c0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f6500000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at c000 [size=32]
Region 3: Memory at f65e0000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at f6580000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: e1000e
05:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host
Controller (rev 04) (prog-if 30 [XHCI])
Subsystem: Micro-Star International Co., Ltd. Device 7640
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at f6400000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
==========
output from: lsusb -vvv:
==========
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.02
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 3
bMaxPacketSize0 9
idVendor 0x1d6b Linux Foundation
idProduct 0x0003 3.0 root hub
bcdDevice 3.02
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 31
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
bMaxBurst 0
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.02
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.02
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.02
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.02
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.02
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.02
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.02
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Bus 002 Device 002: ID 1532:002f Razer USA, Ltd
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x1532 Razer USA, Ltd
idProduct 0x002f
bcdDevice 2.00
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 88
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 107
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Bus 002 Device 003: ID 046d:c31d Logitech, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc31d
bcdDevice 66.00
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 3
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 90mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 2
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 65
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 2
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 159
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 255
==========
output from: /var/log/syslog:
==========
Sep 22 09:32:16 entropia kernel: [ 762.304127] usb 4-4: new high-speed
USB device number 2 using ehci_hcd
Sep 22 09:32:16 entropia kernel: [ 762.416154] usb 4-4: device
descriptor read/64, error -32
Sep 22 09:32:16 entropia kernel: [ 762.632127] usb 4-4: device
descriptor read/64, error -32
Sep 22 09:32:17 entropia kernel: [ 762.848112] usb 4-4: new high-speed
USB device number 3 using ehci_hcd
Sep 22 09:32:17 entropia kernel: [ 762.960111] usb 4-4: device
descriptor read/64, error -32
Sep 22 09:32:17 entropia kernel: [ 763.176186] usb 4-4: device
descriptor read/64, error -32
Sep 22 09:32:17 entropia kernel: [ 763.392185] usb 4-4: new high-speed
USB device number 4 using ehci_hcd
Sep 22 09:32:18 entropia kernel: [ 763.800176] usb 4-4: device not
accepting address 4, error -32
Sep 22 09:32:18 entropia kernel: [ 763.912182] usb 4-4: new high-speed
USB device number 5 using ehci_hcd
Sep 22 09:32:18 entropia kernel: [ 764.320172] usb 4-4: device not
accepting address 5, error -32
Sep 22 09:32:18 entropia kernel: [ 764.320195] hub 4-0:1.0: unable to
enumerate USB device on port 4
Sep 22 09:32:18 entropia kernel: [ 764.652124] usb 7-4: new full-speed
USB device number 2 using ohci_hcd
Sep 22 09:32:19 entropia kernel: [ 764.792122] usb 7-4: device
descriptor read/64, error -32
Sep 22 09:32:19 entropia kernel: [ 765.036105] usb 7-4: device
descriptor read/64, error -32
Sep 22 09:32:19 entropia kernel: [ 765.276182] usb 7-4: new full-speed
USB device number 3 using ohci_hcd
Sep 22 09:32:19 entropia kernel: [ 765.416182] usb 7-4: device
descriptor read/64, error -32
Sep 22 09:32:19 entropia kernel: [ 765.660182] usb 7-4: device
descriptor read/64, error -32
Sep 22 09:32:20 entropia kernel: [ 765.900184] usb 7-4: new full-speed
USB device number 4 using ohci_hcd
Sep 22 09:32:20 entropia kernel: [ 766.308173] usb 7-4: device not
accepting address 4, error -32
Sep 22 09:32:20 entropia kernel: [ 766.444140] usb 7-4: new full-speed
USB device number 5 using ohci_hcd
Sep 22 09:32:21 entropia kernel: [ 766.852174] usb 7-4: device not
accepting address 5, error -32
Sep 22 09:32:21 entropia kernel: [ 766.852219] hub 7-0:1.0: unable to
enumerate USB device on port 4
==========
output from: /var/log/messages:
==========
Sep 22 09:32:16 entropia kernel: [ 762.304127] usb 4-4: new high-speed
USB device number 2 using ehci_hcd
Sep 22 09:32:17 entropia kernel: [ 762.848112] usb 4-4: new high-speed
USB device number 3 using ehci_hcd
Sep 22 09:32:17 entropia kernel: [ 763.392185] usb 4-4: new high-speed
USB device number 4 using ehci_hcd
Sep 22 09:32:18 entropia kernel: [ 763.912182] usb 4-4: new high-speed
USB device number 5 using ehci_hcd
Sep 22 09:32:18 entropia kernel: [ 764.652124] usb 7-4: new full-speed
USB device number 2 using ohci_hcd
Sep 22 09:32:19 entropia kernel: [ 765.276182] usb 7-4: new full-speed
USB device number 3 using ohci_hcd
Sep 22 09:32:20 entropia kernel: [ 765.900184] usb 7-4: new full-speed
USB device number 4 using ohci_hcd
Sep 22 09:32:20 entropia kernel: [ 766.444140] usb 7-4: new full-speed
USB device number 5 using ohci_hcd
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
