Linux USB Users

• Thread Index

• [PATCH 06/24 v2] USB: EHCI: add no_io_watchdog platform_data parameter to ehci-platform
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 05/24 v2] USB: EHCI: remove Netlogic XLS EHCI driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 07/24 v2] MIPS: Alchemy: use the ehci platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 09/24 v2] ARM: cns3xxx: use ehci platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 13/24] USB: ohci: remove check for RH already suspended in ohci_suspend
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 12/24] USB: ohci: move ohci_pci_{suspend,resume} to ohci-hcd.c
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 15/24 v2] MIPS: PNX8550: use OHCI platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 11/24 v2] USB: ohci: allow platform driver to specify the number of ports
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 17/24 v2] ARM: cns3xxx: use OHCI platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 10/24 v2] USB: EHCI: remove CNS3xxx EHCI platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 16/24 v2] USB: OHCI: remove PNX8550 OHCI driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 14/24] USB: ohci: merge ohci_finish_controller_resume with ohci_resume
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 18/24 v2] USB: OHCI: remove CNS3xxx OHCI platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 19/24 v2] MIPS: Netlogic: convert to use OHCI platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 22/24 v2] USB: OHCI: remove OHCI SH platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 23/24 v2] MIPS: Alchemy: use the OHCI platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 24/24 v2] USB: OHCI: remove Alchemy OHCI platform driver.
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 21/24 v2] sh: convert boards to use the OHCI platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 20/24 v2] USB: OHCI: remove Netlogic XLS OHCI platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 08/24 v2] USB: EHCI: remove Alchemy EHCI driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 04/24 v2] MIPS: Netlogic: use ehci-platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 00/24 v2] USB: OHCI and EHCI platform driver conversions
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH 04/25] MIPS: Netlogic: use ehci-platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: some question about xhci spec
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: musb: am35xx: drop spurious unplugging a device
  • From: Stefano Babic <sbabic@xxxxxxx>
• some question about xhci spec
  • From: loody <miloody@xxxxxxxxx>
• Re: [PATCH 20/25] MIPS: Netlogic: convert to use OHCI platform driver
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• Re: [PATCH 04/25] MIPS: Netlogic: use ehci-platform driver
  • From: Jonas Gorski <jonas.gorski@xxxxxxxxx>
• [PATCH] USB: ohci-exynos: use devm_clk_get()
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: Query: usbtest: Test 13: Endpoint Halt Test: At Super Speed does not work
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• RE: [PATCH] usb: ohci-exynos: use clk_prepare_enable and clk_disable_unprepare
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• RE: [PATCH] usb: ehci-s5p: use clk_prepare_enable and clk_disable_unprepare
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• some question about xhci ep0 setting
  • From: loody <miloody@xxxxxxxxx>
• Re: [PATCH 1/1] usb: Include generic_interrupt for OMAP2_PLUS
  • From: Praveena Nadahally <praveen.nadahally@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] USB webcam gadget driver fix for linux-next
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] MAINTAINERS: Add maintainer entry for the USB webcam gadget
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 0/2] USB webcam gadget driver fix for linux-next
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 1/2] usb: gadget: Make webcam gadget select USB_LIBCOMPOSITE
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3] Enable USB peripheral on dm365 EVM
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3] Enable USB peripheral on dm365 EVM
  • From: const@xxxxxxxxxxxxx
• Re: [RFC 1/2] Convert ehci-hcd to a library
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Mouse and keyboard freeze on Ivy Bridge platform
  • From: Jonathan Nieder <jrnieder@xxxxxxxxx>
• Re: [RFT] usb: Don't enable LPM if the exit latency is zero.
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• Re: [PATCH 09/25] MIPS: Octeon: use ehci-platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [RFT] usb: Don't enable LPM if the exit latency is zero.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC 1/2] Convert ehci-hcd to a library
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFT] usb: Fix TX errors on devices with unsupported LPM states.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 18/25] MIPS: Octeon: use OHCI platform driver
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH 04/25] MIPS: Netlogic: use ehci-platform driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 25/25] USB: ohci: remove Alchemy OHCI platform driver.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 09/25] MIPS: Octeon: use ehci-platform driver
  • From: David Daney <ddaney.cavm@xxxxxxxxx>
• Re: [PATCH 12/25] USB: ehci: remove CNS3xxx EHCI platform driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 24/25] MIPS: Alchemy: use the OHCI platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH 06/25] USB: ehci: allow need_io_watchdog to be passed to ehci-platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH 24/25] MIPS: Alchemy: use the OHCI platform driver
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxx>
• Re: [PATCH 06/25] USB: ehci: allow need_io_watchdog to be passed to ehci-platform driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 00/25] USB: EHCI and OHCI platform driver conversions
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH 00/25] USB: EHCI and OHCI platform driver conversions
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 24/25] MIPS: Alchemy: use the OHCI platform driver
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxx>
• Re: [PATCH 24/25] MIPS: Alchemy: use the OHCI platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 19/25] USB: ohci: remove Octeon OHCI platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH 24/25] MIPS: Alchemy: use the OHCI platform driver
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxx>
• Re: [PATCH 07/25] MIPS: Alchemy: use the ehci platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 00/25] USB: EHCI and OHCI platform driver conversions
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 25/25] USB: ohci: remove Alchemy OHCI platform driver.
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 12/25] USB: ehci: remove CNS3xxx EHCI platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 18/25] MIPS: Octeon: use OHCI platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 02/25] MIPS: Loongson 1B: use ehci-platform instead of ehci-ls1x.
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 22/25] sh: convert boards to use the OHCI platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 09/25] MIPS: Octeon: use ehci-platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 14/25] MIPS: PNX8550: useOHCI platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 05/25] USB: ehci: remove Netlogic XLS EHCI driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 13/25] USB: ohci: allow platform driver to specify the number of ports
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 10/25] USB: ehci: remove Octeon EHCI driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 24/25] MIPS: Alchemy: use the OHCI platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 21/25] USB: ohci: remove Netlogic XLS OHCI platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 07/25] MIPS: Alchemy: use the ehci platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 06/25] USB: ehci: allow need_io_watchdog to be passed to ehci-platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 01/25] USB: ehci: remove IXP4xx EHCI driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 11/25] ARM: cns3xxx: use ehci platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 14/25] MIPS: PNX8550: use OHCI platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH 07/25] MIPS: Alchemy: use the ehci platform driver
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxx>
• [PATCH 16/25] ARM: cns3xxx: use OHCI platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 03/25] USB: ehci: remove Loongson 1B EHCI driver.
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 15/25] USB: ohci: remove PNX8550 OHCI driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 08/25] USB: ehci: remove Alchemy EHCI driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 23/25] USB: ohci: remove OHCI SH platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 17/25] USB: ohci: remove CNS3xxx OHCI platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 20/25] MIPS: Netlogic: convert to use OHCI platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 04/25] MIPS: Netlogic: use ehci-platform driver
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: Linux xHCI driver problems (reset ep)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/7] usb: core: reuse kbasename()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Mouse and keyboard freeze on Ivy Bridge platform
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] umc-bus.c: fix usage of device_trylock
  • From: Claudio Scordino <claudio@xxxxxxxxxxxxxxx>
• RE: [PATCH 1/1] usb: Include generic_interrupt for OMAP2_PLUS
  • From: Philippe De Swert <philippe.deswert@xxxxxxxxxxxxxxx>
• Re: [RFT] usb: Fix TX errors on devices with unsupported LPM states.
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• Re: [PATCH 6/7] usb: core: reuse kbasename()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Mouse and keyboard freeze on Ivy Bridge platform
  • From: sebastien.dinot@xxxxxxx
• [PATCH] usb: renesas_usbhs: use devm_request_irq()
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• RE: [PATCH] usb: phy: tegra remove include of <mach/iomap.h>
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• RE: [PATCH] usb: host: tegra remove include of <mach/iomap.h>
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• Sequence number not incremented for large control transfer
  • From: Yuliya T <yuliyat001@xxxxxxxxx>
• Re: Linux xHCI driver problems (reset ep)
  • From: Yuliya T <yuliyat001@xxxxxxxxx>
• [PATCH] usb: ohci-exynos: use clk_prepare_enable and clk_disable_unprepare
  • From: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
• [PATCH] usb: ehci-s5p: use clk_prepare_enable and clk_disable_unprepare
  • From: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
• [PATCH] usb: phy: tegra remove include of <mach/iomap.h>
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• [PATCH] usb: host: tegra remove include of <mach/iomap.h>
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [RFT] usb: Fix TX errors on devices with unsupported LPM states.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFT] usb: Fix TX errors on devices with unsupported LPM states.
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• Re: linux-next: Tree for Oct 2 (usb/gadget/webcam.c)
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
• Re: [patch 2/2] target: strlen() doesn't count the terminator
  • From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
• Re: [patch 1/2] target: remove duplicate initialization
  • From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
• Re: [RFT] usb: Fix TX errors on devices with unsupported LPM states.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC 1/2] Convert ehci-hcd to a library
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFT] usb: Fix TX errors on devices with unsupported LPM states.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [RFT] usb: Fix TX errors on devices with unsupported LPM states.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• FTDI USB-to-UART converters and tcdrain()
  • From: Jarkko Huijts <jarkko.huijts@xxxxxxxxxxxxxxxxx>
• [PATCH 6/7] usb: core: reuse kbasename()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC 2/2] Convert ehci-pci to a separate module
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC 1/2] Convert ehci-hcd to a library
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: serial: ftdi_sio: option to hide selected interfaces of multiple interfaces convertes
  • From: Robert Ryszard Paciorek <R.Paciorek@xxxxxxxxxx>
• [patch] orinoco_usb: clean up some signedness issues
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [patch] WUSB: remove an unnused variable
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [patch 1/2] target: remove duplicate initialization
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [patch 2/2] target: strlen() doesn't count the terminator
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v5] can: kvaser_usb: Add support for Kvaser CAN/USB devices
  • From: Olivier Sobrie <olivier@xxxxxxxxx>
• Re: [PATCH v4] can: kvaser_usb: Add support for Kvaser CAN/USB devices
  • From: Olivier Sobrie <olivier@xxxxxxxxx>
• [PATCH 12/12] usbnet: make device out of suspend before calling usbnet_read/write_cmd
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 11/12] usbnet: smsc95xx: apply introduced usb command APIs
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 10/12] usbnet: smsc75xx: apply introduced usb command APIs
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 09/12] usbnet: sierra_net: apply introduced usb command APIs
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 08/12] usbnet: plusb: apply introduced usb command APIs
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 07/12] usbnet: net1080: apply introduced usb command APIs
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 06/12] usbnet: mcs7830: apply introduced usb command APIs
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 05/12] usbnet: int51x1: apply introduced usb command APIs
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 04/12] usbnet: dm9601: apply introduced usb command APIs
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 03/12] usbnet: cdc-ncm: apply introduced usb command APIs
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 02/12] usbnet: asix: apply introduced usb command APIs
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 01/12] usbnet: introduce usbnet 3 command helpers
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH 00/12] usbnet: usb_control_msg cleanup
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] Adds support for Lenovo 10/100 USB dongle.
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [RFC 2/2] Convert ehci-pci to a separate module
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [RFC 1/2] Convert ehci-hcd to a library
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: xhci: LPM issues using Western Digital harddrive
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: xhci: LPM issues using Western Digital harddrive
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb hub: send clear_tt_buffer_complete events when canceling TT clear work
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: xhci: LPM issues using Western Digital harddrive
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH v2] usb hub: send clear_tt_buffer_complete events when canceling TT clear work
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: [PATCH 4/4] OHCI: implement new semantics for URB_ISO_ASAP
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [GIT PATCH] USB patches for 3.7-rc1
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb hub: send clear_tt_buffer_complete events when canceling TT clear work
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: [PATCH 4/4] OHCI: implement new semantics for URB_ISO_ASAP
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v2 6/7] usb: dwc3-omap: Minor fixes to get dt working
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] usb hub: send clear_tt_buffer_complete events when canceling TT clear work
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: PROBLEM: USB2 oopses with stable kernels
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb hub: send clear_tt_buffer_complete events when canceling TT clear work
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: xhci: LPM issues using Western Digital harddrive
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• PROBLEM: USB2 oopses with stable kernels
  • From: Tuomas Jorma Juhani Räsänen <tuomasjjrasanen@xxxxxxxxxx>
• [PATCH] usb hub: send clear_tt_buffer_complete events when canceling TT clear work
  • From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
• Re: xhci: LPM issues using Western Digital harddrive
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Fresco USB 3.0 Issue
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 4/4] OHCI: implement new semantics for URB_ISO_ASAP
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/4] UHCI: implement new semantics for URB_ISO_ASAP
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/4] EHCI: implement new semantics for URB_ISO_ASAP
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/4] USB: update documentation for URB_ISO_ASAP
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/4] USB: Define and implement URB_ISO_ASAP
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 6/7] usb: dwc3-omap: Minor fixes to get dt working
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 4/7] usb: dwc3-omap: Remove explicit writes to SYSCONFIG register
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 0/7] usb: dwc3-omap: add dt support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 1/7] usb: dwc3-omap: use device_for_each_child to handle child removal
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 5/7] usb: dwc3-omap: Add an API to write to dwc mailbox
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 2/7] usb: dwc3-omap: use of_platform API to create dwc3 core pdev
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 7/7] usb: dwc3: core: add dt support for dwc3 core
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 3/7] usb: dwc3-omap: use runtime API's to enable clocks
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] usb: otg: Resolving a config conflict between omap4030_usb/omap6030 and usb_musb_omap2plus
  • From: Peter Meerwald <pmeerw@xxxxxxxxxx>
• Re: USBDEVFS_BULK
  • From: Sedki <bougatas@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: otg: Resolving a config conflict between omap4030_usb/omap6030 and usb_musb_omap2plus
  • From: jrm.kurtz@xxxxxxxxx
• Re: [PATCH 1/6] usb: dwc3-omap: use of_platform API to create dwc3 core pdev
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 6/6] usb: dwc3: core: add dt support for dwc3 core
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: cannot submit urb 0, error -22: internal error followed by USB hung tasks
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: cannot submit urb 0, error -22: internal error followed by USB hung tasks
  • From: Lassi Väätämöinen <lassi.vaatamoinen@xxxxxx>
• Re: [PATCH 6/6] usb: dwc3: core: add dt support for dwc3 core
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: cannot submit urb 0, error -22: internal error followed by USB hung tasks
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: cannot submit urb 0, error -22: internal error followed by USB hung tasks
  • From: Lassi Väätämöinen <lassi.vaatamoinen@xxxxxx>
• Re: cannot submit urb 0, error -22: internal error followed by USB hung tasks
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Bug 43279] No USB 3.0 support for Prolific PL2773
  • From: paul sorenson <paul@xxxxxxxxxx>
• Re: cannot submit urb 0, error -22: internal error followed by USB hung tasks
  • From: Peter Stuge <peter@xxxxxxxx>
• Re: cannot submit urb 0, error -22: internal error followed by USB hung tasks
  • From: Lassi Väätämöinen <lassi.vaatamoinen@xxxxxxxxx>
• Re: [usb-storage] Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Theodore Kilgore <kilgota@xxxxxxxxxxxxxxxxxxxxxx>
• Re: cannot submit urb 0, error -22: internal error followed by USB hung tasks
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [usb-storage] Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Peter Stuge <peter@xxxxxxxx>
• Re: [usb-storage] Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Adrian Sandu <dexter@xxxxxxxxxxx>
• Re: [usb-storage] Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Theodore Kilgore <kilgota@xxxxxxxxxxxxxxxxxxxxxx>
• Re: USBDEVFS_BULK
  • From: Sedki <bougatas@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: USBDEVFS_BULK
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [usb-storage] Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Adrian Sandu <dexter@xxxxxxxxxxx>
• Re: USBDEVFS_BULK
  • From: Peter Stuge <peter@xxxxxxxx>
• Re: USBDEVFS_BULK
  • From: Sedki <bougatas@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: USBDEVFS_BULK
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• USBDEVFS_BULK
  • From: Sedki <bougatas@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: PROBLEM: kernel 3.6.rc6 bug report (usb 3.0 external hard drive problem)
  • From: Gabor Takacs <gbrtakacs@xxxxxxxxx>
• Re: PROBLEM: kernel 3.6.rc6 bug report (usb 3.0 external hard drive problem)
  • From: Gabor Takacs <gbrtakacs@xxxxxxxxx>
• Re: PROBLEM: kernel 3.6.rc6 bug report (usb 3.0 external hard drive problem)
  • From: Gabor Takacs <gbrtakacs@xxxxxxxxx>
• Re: cannot submit urb 0, error -22: internal error followed by USB hung tasks
  • From: Lassi Väätämöinen <lassi.vaatamoinen@xxxxxxxxx>
• Re: cannot submit urb 0, error -22: internal error followed by USB hung tasks
  • From: Lassi Väätämöinen <lassi.vaatamoinen@xxxxxxxxx>
• [PATCH 1/1] Adds support for Lenovo 10/100 USB dongle.
  • From: Quinlan Pfiffer <qpfiffer@xxxxxxxxx>
• Re: xhci: LPM issues using Western Digital harddrive
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: cannot submit urb 0, error -22: internal error followed by USB hung tasks
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 02/12] usb: chipidea: udc: add pullup fuction, needed by the uvc gadget
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: xhci: LPM issues using Western Digital harddrive
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: cannot submit urb 0, error -22: internal error followed by USB hung tasks
  • From: Lassi Väätämöinen <lassi.vaatamoinen@xxxxxxxxx>
• Re: PROBLEM: kernel 3.6.rc6 bug report (usb 3.0 external hard drive problem)
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: xhci: LPM issues using Western Digital harddrive
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: xhci: LPM issues using Western Digital harddrive
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• [PATCH 3/3] EHCI: replace mult/div with bit-mask operation
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] EHCI: use the isochronous scheduling threshold
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] EHCI: improved logic for isochronous scheduling
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/3] EHCI isochronous scheduling improvements
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] drivers: usb: phy: add a new driver for omap usb2 phy
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: xhci: LPM issues using Western Digital harddrive
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB3 port not detected in 'vanilla' kernel, works with etxhci_hcd module in original firmware
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: xhci: LPM issues using Western Digital harddrive
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• Re: xhci: LPM issues using Western Digital harddrive
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• RE: [PATCH 02/12] usb: chipidea: udc: add pullup fuction, needed by the uvc gadget
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: xhci: LPM issues using Western Digital harddrive
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] arm: omap: move OMAP USB platform data to <linux/platform_data/omap-usb.h>
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/5] drivers: usb: phy: add a new driver for omap usb2 phy
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: xhci: LPM issues using Western Digital harddrive
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• [PATCH] Add CDC-ACM support for the CX93010-2x UCMxx USB Modem
  • From: jc@xxxxxxxx
• Re: PROBLEM: kernel 3.6.rc6 bug report (usb 3.0 external hard drive problem)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: PROBLEM: kernel 3.6.rc6 bug report (usb 3.0 external hard drive problem)
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: cannot submit urb 0, error -22: internal error followed by USB hung tasks
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] usb: dwc3: core: add dt support for dwc3 core
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH 4/6] usb: dwc3-omap: Add an API to write to dwc mailbox
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH 2/6] usb: dwc3-omap: use runtime API's to enable clocks
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH 1/6] usb: dwc3-omap: use of_platform API to create dwc3 core pdev
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH 6/6] usb: dwc3: core: add dt support for dwc3 core
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/6] usb: dwc3-omap: Add an API to write to dwc mailbox
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/6] usb: dwc3-omap: use runtime API's to enable clocks
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/6] usb: dwc3-omap: use of_platform API to create dwc3 core pdev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 5/6] usb: dwc3-omap: Minor fixes to get dt working
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 0/6] usb: dwc3-omap: add dt support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 1/6] usb: dwc3-omap: use of_platform API to create dwc3 core pdev
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 6/6] usb: dwc3: core: add dt support for dwc3 core
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 4/6] usb: dwc3-omap: Add an API to write to dwc mailbox
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 3/6] usb: dwc3-omap: Remove explicit writes to SYSCONFIG register
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 2/6] usb: dwc3-omap: use runtime API's to enable clocks
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 1/5] drivers: usb: phy: add a new driver for omap usb2 phy
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH v2 1/2] usb: phy: add a new driver for usb3 phy
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH usb:usb-next] USB: ezusb: make some vars/funcs static
  • From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
• Re: [usb-storage] Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Adrian Sandu <dexter@xxxxxxxxxxx>
• [PATCH] usb: dwc3: exynos: use devm_ functions
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH] arm: omap: move OMAP USB platform data to <linux/platform_data/omap-usb.h>
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [usb-storage] Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Adrian Sandu <dexter@xxxxxxxxxxx>
• Re: [PATCH 10/29] PCI, USB: remove find_bridge in acpi_bus_type
  • From: Lan Tianyu <lantianyu1986@xxxxxxxxx>
• Re: cannot submit urb 0, error -22: internal error followed by USB hung tasks
  • From: Lassi Väätämöinen <lassi.vaatamoinen@xxxxxxxxx>
• Re: [usb-storage] Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Theodore Kilgore <kilgota@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] drivers: usb: phy: add a new driver for omap usb2 phy
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: cannot submit urb 0, error -22: internal error followed by USB hung tasks
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: xhci: LPM issues using Western Digital harddrive
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [usb-storage] Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Adrian Sandu <dexter@xxxxxxxxxxx>
• Re: [PATCH 10/29] PCI, USB: remove find_bridge in acpi_bus_type
  • From: Yinghai Lu <yinghai@xxxxxxxxxx>
• Re: xhci: LPM issues using Western Digital harddrive
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [usb-storage] Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: cannot submit urb 0, error -22: internal error followed by USB hung tasks
  • From: Lassi Väätämöinen <lassi.vaatamoinen@xxxxxxxxx>
• Re: [usb-storage] Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Adrian Sandu <dexter@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] USB: check port changes before hub runtime suspend for some bug device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [usb-storage] Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb/xhci: release xhci->lock during turning on/off usb port's acpi power resource
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [usb-storage] Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Adrian Sandu <dexter@xxxxxxxxxxx>
• Re: [PATCH usb:usb-next] USB: ezusb: make some vars/funcs static
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [usb-storage] Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Adrian Sandu <dexter@xxxxxxxxxxx>
• [GIT PATCH] USB fixes for 3.6-rc7
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [usb-storage] Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Peter Stuge <peter@xxxxxxxx>
• [PATCH v3 2/2] USB: set hub's default autosuspend delay as 0
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH v3 1/2] USB: check port changes before hub runtime suspend for some bug device
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH v3 0/2] USB: USB: two changes on hub autosuspend
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [usb-storage] Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [usb-storage] Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] USB: check port changes before hub runtime suspend for some bug device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] drivers: usb: phy: add a new driver for omap usb2 phy
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [usb-storage] Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Adrian Sandu <dexter@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] USB: check port changes before hub runtime suspend for some bug device
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [usb-storage] Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [usb-storage] Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Adrian Sandu <dexter@xxxxxxxxxxx>
• Re: [usb-storage] Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] USB: check port changes before hub runtime suspend for some bug device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] drivers: usb: phy: add a new driver for omap usb2 phy
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH v2 2/2] USB: set hub's default autosuspend delay as 0
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: proposal for switching off stuff for external ports
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: phy: add a new driver for usb3 phy
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH v2 1/2] usb: phy: add a new driver for usb3 phy
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 2/2] usb: phy: omap-usb2: enable 960Mhz clock for omap5
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 0/2] usb: phy: add usb3 phy driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [usb-storage] Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Adrian Sandu <dexter@xxxxxxxxxxx>
• Re: [PATCH] USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• [PATCH usb:usb-next] USB: ezusb: make some vars/funcs static
  • From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
• [PATCH 1/3] usb: otg: nop: add dt support
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH 3/3] usb: musb: dsps: document dt bindings properly
  • From: Afzal Mohammed <afzal@xxxxxx>
• [PATCH 2/3] usb: musb: dsps: remove nop unregister
  • From: Afzal Mohammed <afzal@xxxxxx>
• RE: [PATCH 02/12] usb: chipidea: udc: add pullup fuction, needed by the uvc gadget
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] usb: phy: omap-usb2: enable 960Mhz clock for omap5
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/4] usb: phy: omap-usb2: enable 960Mhz clock for omap5
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• [PATCH v2 2/2] USB: set hub's default autosuspend delay as 0
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH v2 1/2] USB: check port changes before hub runtime suspend for some bug device
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH v2 0/2] USB: USB: two changes on hub autosuspend
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: Kirkwood: ehci-orion: Add device tree binding
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [Patch v5] ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
  • From: Rene Buergel <rene.buergel@xxxxxxxxx>
• Re: [Patch v5] ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
  • From: Greg KH <greg@xxxxxxxxx>
• Re: proposal for switching off stuff for external ports
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [Patch v5] ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
  • From: Peter Stuge <peter@xxxxxxxx>
• Re: [PATCH 1/2] USB: uas: fix locking
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [Patch v5] ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [Patch v5] ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
  • From: Rene Buergel <rene.buergel@xxxxxxxxx>
• Re: [PATCH] drivers: phy: add generic PHY framework
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: proposal for switching off stuff for external ports
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] usb: dwc3: workaround: unexpected transtion U3 -> RESUME
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/2] usb: dwc3: core: define more revisions
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 01/10] usb: otg: msm: Convert to clk_prepare/unprepare
  • From: Pankaj Jangra <jangra.pankaj9@xxxxxxxxx>
• Re: [PATCH 01/10] usb: otg: msm: Convert to clk_prepare/unprepare
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] usb: phy: omap-usb2: enable 960Mhz clock for omap5
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: proposal for switching off stuff for external ports
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] drivers: phy: add generic PHY framework
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• xhci: LPM issues using Western Digital harddrive
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• Re: [PATCH] drivers: phy: add generic PHY framework
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 3/3] xhci: Intel Panther Point BEI quirk.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [usb-storage] Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Adrian Sandu <dexter@xxxxxxxxxxx>
• [PATCH] USB: Fix race condition when removing host controllers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] drivers: phy: add generic PHY framework
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] drivers: phy: add generic PHY framework
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [usb-storage] Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Adrian Sandu <dexter@xxxxxxxxxxx>
• Re: [PATCH 01/10] usb: otg: msm: Convert to clk_prepare/unprepare
  • From: Pankaj Jangra <jangra.pankaj9@xxxxxxxxx>
• Re: [PATCH] drivers: phy: add generic PHY framework
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] usb/core: Fix race condition when removing EHCI PCI devices
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• Re: [PATCH] usb/core: Fix race condition when removing EHCI PCI devices
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [BUG] FTDI driver framing error with even parity (cont)
  • From: Andrew <andrew@xxxxxxxxxx>
• Re: [PATCH] usb/core: Fix race condition when removing EHCI PCI devices
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• Re: proposal for switching off stuff for external ports
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: proposal for switching off stuff for external ports
  • From: Felipe Balbi <balbi@xxxxxx>
• proposal for switching off stuff for external ports
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH 02/12] usb: chipidea: udc: add pullup fuction, needed by the uvc gadget
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: 152d:0539 JMicron Technology USB -> eSata and sata port multiplier
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Remote wakeup vs. hub suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] drivers: phy: add generic PHY framework
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [usb-storage] Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 1/1] usb: Include generic_interrupt for OMAP2_PLUS
  • From: Philippe De Swert <philippe.deswert@xxxxxxxxxxxxxxx>
• Re: The USB is not working with SM502 Graphics, but working with Intel Pc graphics
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Query: usbtest: Test 13: Endpoint Halt Test: At Super Speed does not work
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [BUG] FTDI driver framing error with even parity (cont)
  • From: Andrew <andrew@xxxxxxxxxx>
• Re: [BUG] FTDI driver framing error with even parity (cont)
  • From: Uwe Bonnes <bon@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [BUG] FTDI driver framing error with even parity (cont)
  • From: Uwe Bonnes <bon@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [BUG] FTDI driver framing error with even parity
  • From: Uwe Bonnes <bon@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: removing the timer from cdc-ncm
  • From: Alexey ORISHKO <alexey.orishko@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] drivers: phy: add generic PHY framework
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] drivers: phy: add generic PHY framework
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: removing the timer from cdc-ncm
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: Remote wakeup vs. hub suspend
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• [PATCH 2/2] uas: fix gcc warning
  • From: Gerd Hoffmann <kraxel@xxxxxxxxxx>
• [PATCH 1/2] uas: fix locking
  • From: Gerd Hoffmann <kraxel@xxxxxxxxxx>
• Re: [PATCH v6 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• Loading CDC composite device ACM and MassStorage: g_acm_ms failed
  • From: "info@xxxxxxxxxxxxxxxxxx" <info@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• Re: [usb:usb-next 66/70] drivers/usb/storage/uas.c:638:12: sparse: context imbalance in 'uas_eh_task_mgmt' - wrong count at exit
  • From: Gerd Hoffmann <kraxel@xxxxxxxxxx>
• Re: [PATCH 3/3] xhci: Intel Panther Point BEI quirk.
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH 1/1] usb: Include generic_interrupt for OMAP2_PLUS
  • From: Praveena Nadahally <praveen.nadahally@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] usb: phy: omap-usb2: enable 960Mhz clock for omap5
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• 152d:0539 JMicron Technology USB -> eSata and sata port multiplier
  • From: Harry McGregor <hmcgregor@xxxxxxxxxxxx>
• Re: XHCI Bug discovered in 3.6-RC6 (solution included)
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• [usb:usb-next 66/70] drivers/usb/storage/uas.c:638:12: sparse: context imbalance in 'uas_eh_task_mgmt' - wrong count at exit
  • From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
• libusbx-1.0.14 has been released
  • From: Pete Batard <pbatard@xxxxxxxxx>
• Re: [Pull Request] xHCI bug fixes for 3.7
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] uas: bug fixes
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] usb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86 systems
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [Pull Request] xHCI bug fixes for 3.7
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 3/3] xhci: Intel Panther Point BEI quirk.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 1/3] Increase XHCI suspend timeout to 16ms
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC] xhci: Intel Panther Point BEI quirk.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Andiry Xu <andiry@xxxxxxxxx>
• Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Adrian Sandu <dexter@xxxxxxxxxxx>
• Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Adrian Sandu <dexter@xxxxxxxxxxx>
• Re: [BUG] FTDI driver framing error with even parity
  • From: Andrew <andrew@xxxxxxxxxx>
• Re: [BUG] FTDI driver framing error with even parity
  • From: Andrew <andrew@xxxxxxxxxx>
• Re: [PATCH 10/29] PCI, USB: remove find_bridge in acpi_bus_type
  • From: Yinghai Lu <yinghai@xxxxxxxxxx>
• Re: Query: usbtest: Test 13: Endpoint Halt Test: At Super Speed does not work
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB tree closed for 3.7
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] xhci: Intel Panther Point BEI quirk.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: [PATCH 2/3] usb: gadget: Add USB functions gadget
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: Query: usbtest: Test 13: Endpoint Halt Test: At Super Speed does not work
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [BUG] FTDI driver framing error with even parity
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB tree closed for 3.7
  • From: Gerd Hoffmann <kraxel@xxxxxxxxxx>
• Re: [PATCH v1 2/2] USB: set hub's default autosuspend delay as 0
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] USB: check port changes before hub runtime suspend for some bug device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Remote wakeup vs. hub suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [BUG] FTDI driver framing error with even parity
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Question about dev_uevent_filter
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] How to handle delays in isochronous transfers?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] xhci: Intel Panther Point BEI quirk.
  • From: Greg KH <greg@xxxxxxxxx>
• Re: usb-audio: Increasing MAX_QUEUE to prevent hiccups in the audio stream?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] xhci: Intel Panther Point BEI quirk.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] xhci: Intel Panther Point BEI quirk.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• USB tree closed for 3.7
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: XHCI Bug discovered in 3.6-RC6 (solution included)
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v6 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [RFC] How to handle delays in isochronous transfers?
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: Query: usbtest: Test 13: Endpoint Halt Test: At Super Speed does not work
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Query: usbtest: Test 13: Endpoint Halt Test: At Super Speed does not work
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• RE: removing the timer from cdc-ncm
  • From: Alexey ORISHKO <alexey.orishko@xxxxxxxxxxxxxx>
• Re: [PATCH v6 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: Query: usbtest: Test 13: Endpoint Halt Test: At Super Speed does not work
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• RE: [PATCH v3] USB: PHY: Re-organize Tegra USB PHY driver
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• Query: usbtest: Test 13: Endpoint Halt Test: At Super Speed does not work
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• RE: query on [PATCH 2/3] usb: otg: add device tree support to otg library
  • From: "Mohammed, Afzal" <afzal@xxxxxx>
• Re: query on [PATCH 2/3] usb: otg: add device tree support to otg library
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH v1 2/2] USB: set hub's default autosuspend delay as 0
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH 1/5] drivers: usb: phy: add a new driver for omap usb2 phy
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH] USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: XHCI Bug discovered in 3.6-RC6 (solution included)
  • From: Vivek Gautam <gautamvivek1987@xxxxxxxxx>
• Re: [BUG] FTDI driver framing error with even parity
  • From: Andrew <andrew@xxxxxxxxxx>
• Re: [PATCH 1/1] usb: Include generic_interrupt for OMAP2_PLUS
  • From: Philippe De Swert <philippedeswert@xxxxxxxxx>
• Re: query on [PATCH 2/3] usb: otg: add device tree support to otg library
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [BUG] FTDI driver framing error with even parity
  • From: Uwe Bonnes <bon@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 4/5] uas: fix abort
  • From: Gerd Hoffmann <kraxel@xxxxxxxxxx>
• [PATCH v2 5/5] uas: add locking
  • From: Gerd Hoffmann <kraxel@xxxxxxxxxx>
• [PATCH v2 1/5] uas: keep track of command urbs
  • From: Gerd Hoffmann <kraxel@xxxxxxxxxx>
• [PATCH v2 3/5] uas: remove aborted field, replace with status bit.
  • From: Gerd Hoffmann <kraxel@xxxxxxxxxx>
• [PATCH v2 2/5] uas: fix task management
  • From: Gerd Hoffmann <kraxel@xxxxxxxxxx>
• [PATCH v2 0/5] uas: bug fixes
  • From: Gerd Hoffmann <kraxel@xxxxxxxxxx>
• query on [PATCH 2/3] usb: otg: add device tree support to otg library
  • From: "Mohammed, Afzal" <afzal@xxxxxx>
• Re: usb-audio: Increasing MAX_QUEUE to prevent hiccups in the audio stream?
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• Re: [PATCH 10/29] PCI, USB: remove find_bridge in acpi_bus_type
  • From: Lan Tianyu <lantianyu1986@xxxxxxxxx>
• [PATCH 10/29] PCI, USB: remove find_bridge in acpi_bus_type
  • From: Yinghai Lu <yinghai@xxxxxxxxxx>
• Re: [PATCH 1/1] usb: Include generic_interrupt for OMAP2_PLUS
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [Libusbx-devel] libusbx-1.0.13 has been released
  • From: Ludovic Rousseau <ludovic.rousseau@xxxxxxxxx>
• Re: USB port power off discussion
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [BUG] FTDI driver framing error with even parity
  • From: Andrew <andrew@xxxxxxxxxx>
• [PATCH 2/2] usb/xhci: Remove (__force__ __u16) before assigning DeviceRemovable and assign directly.
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH 1/2] usb/xhci: release xhci->lock during turning on/off usb port's acpi power resource
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Adrian Sandu <dexter@xxxxxxxxxxx>
• Re: [PATCH v1 2/2] USB: set hub's default autosuspend delay as 0
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] USB: set hub's default autosuspend delay as 0
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [RFC] xhci: Intel Panther Point BEI quirk.
  • From: Andiry Xu <andiry@xxxxxxxxx>
• Re: [PATCH v1 1/2] USB: check port changes before hub runtime suspend for some bug device
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: Remote wakeup vs. hub suspend
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [Patch v4] ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
  • From: Rene Buergel <rene.buergel@xxxxxxxxx>
• Re: [RFC] xhci: Intel Panther Point BEI quirk.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: USB port power off discussion
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Linux xHCI driver problems
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: USB port power off discussion
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH v3] HID: keep dev_rdesc unmodified and use it for comparisons
  • From: Randy Levensalor <randyl@xxxxxx>
• Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Linux xHCI driver problems
  • From: Yuliya T <yuliyat001@xxxxxxxxx>
• Re: USB port power off discussion
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Libusbx-devel] libusbx-1.0.13 has been released
  • From: Nathan Hjelm <hjelmn@xxxxxxx>
• Re: USB port power off discussion
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: USB port power off discussion
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: USB port power off discussion
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] xhci: Intel Panther Point BEI quirk.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [Libusbx-devel] libusbx-1.0.13 has been released
  • From: Pete Batard <pete@xxxxxxx>
• Re: [Libusbx-devel] libusbx-1.0.13 has been released
  • From: Jure Menart <jure.menart@xxxxxxxxx>
• Re: [RFC] xhci: Intel Panther Point BEI quirk.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Libusbx-devel] libusbx-1.0.13 has been released
  • From: Kustaa Nyholm <Kustaa.Nyholm@xxxxxxxxxxxx>
• Re: [Libusbx-devel] libusbx-1.0.13 has been released
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [Libusbx-devel] libusbx-1.0.13 has been released
  • From: Pete Batard <pete@xxxxxxx>
• Re: [PATCH v1 1/2] USB: check port changes before hub runtime suspend for some bug device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Libusbx-devel] libusbx-1.0.13 has been released
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [Libusbx-devel] libusbx-1.0.13 has been released
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [RFC] xhci: Intel Panther Point BEI quirk.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [Libusbx-devel] libusbx-1.0.13 has been released
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v1 2/2] USB: set hub's default autosuspend delay as 0
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Libusbx-devel] libusbx-1.0.13 has been released
  • From: "Sean McBride" <sean@xxxxxxxxxxxxxxxxxx>
• Re: [Libusbx-devel] libusbx-1.0.13 has been released
  • From: Kustaa Nyholm <Kustaa.Nyholm@xxxxxxxxxxxx>
• Re: [Libusbx-devel] libusbx-1.0.13 has been released
  • From: Pete Batard <pete@xxxxxxx>
• Re: [Libusbx-devel] libusbx-1.0.13 has been released
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [Libusbx-devel] libusbx-1.0.13 has been released
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: libusbx-1.0.13 has been released
  • From: Greg KH <greg@xxxxxxxxx>
• Re: xhci: Etron XHCI_TRUST_TX_LENGTH quirk
  • From: Matthew Hall <mhall@xxxxxxxxxxxxxxx>
• Re: [Libusbx-devel] libusbx-1.0.13 has been released
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: libusbx-1.0.13 has been released
  • From: Pete Batard <pete@xxxxxxx>
• Re: libusbx-1.0.13 has been released
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Adrian Sandu <dexter@xxxxxxxxxxx>
• Re: usb3 fails to write when using usb3 hub in usb3 port
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: USB port power off discussion
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: libusbx-1.0.13 has been released
  • From: Kustaa Nyholm <Kustaa.Nyholm@xxxxxxxxxxxx>
• Re: [PATCH v3] powerpc/usb: fix bug of CPU hang when missing USB PHY clock
  • From: Greg KH <greg@xxxxxxxxx>
• Re: libusbx-1.0.13 has been released
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] USB: check port changes before hub runtime suspend for some bug device
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] USB: set hub's default autosuspend delay as 0
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• RE: XHCI: URB not cancelled during disconnect of a MSC device
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• Re: [RFC PATCH 0/3] usbnet: support runtime PM triggered by link change
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH] usb/core: Fix race condition when removing EHCI PCI devices
  • From: Don Zickus <dzickus@xxxxxxxxxx>
• Re: [PATCH v1 2/2] USB: set hub's default autosuspend delay as 0
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>