Hi, On Mon, Sep 24, 2012 at 6:45 PM, Rob Herring <robherring2@xxxxxxxxx> wrote: > On 09/06/2012 09:57 AM, Kishon Vijay Abraham I wrote: >> All phy related programming like enabling/disabling the clocks, powering >> on/off the phy is taken care of by this driver. It is also used for OTG >> related functionality like srp. >> >> This also includes device tree support for usb2 phy driver and >> the documentation with device tree binding information is updated. >> >> Currently writing to control module register is taken care in this >> driver which will be removed once the control module driver is in place. >> >> Cc: Felipe Balbi <balbi@xxxxxx> >> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> >> --- >> Documentation/devicetree/bindings/usb/usb-phy.txt | 17 ++ >> drivers/usb/phy/Kconfig | 9 + >> drivers/usb/phy/Makefile | 1 + >> drivers/usb/phy/omap-usb2.c | 271 +++++++++++++++++++++ >> include/linux/usb/omap_usb.h | 46 ++++ >> include/linux/usb/phy_companion.h | 34 +++ >> 6 files changed, 378 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/usb/usb-phy.txt >> create mode 100644 drivers/usb/phy/omap-usb2.c >> create mode 100644 include/linux/usb/omap_usb.h >> create mode 100644 include/linux/usb/phy_companion.h >> >> diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/usb/usb-phy.txt >> new file mode 100644 >> index 0000000..80d4148 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/usb/usb-phy.txt > > This is a very generic name... > >> @@ -0,0 +1,17 @@ >> +USB PHY >> + >> +OMAP USB2 PHY >> + >> +Required properties: >> + - compatible: Should be "ti,omap-usb2" > > ...for a specific phy. However, I do think a generic binding to describe > host ctrlr to phy connections is needed. > >> + - reg : Address and length of the register set for the device. Also >> +add the address of control module dev conf register until a driver for >> +control module is added > > The dts should describe the h/w, not what you need for the current > driver. The 2nd reg field does not belong here. Indeed. This was discussed and agreed upon as a interim solution till we have a control module driver in place to write to the control module register. > >> + >> +This is usually a subnode of ocp2scp to which it is connected. > > How is usb port to phy connection described? Currently the usb controller to phy connection is established only by type. We have a couple of patches being currently discussed in the list to establish the connection by phandle. https://patchwork.kernel.org/patch/1457801/ (Generic PHY Framework: devm_of_phy_get()) http://www.spinics.net/lists/linux-usb/msg69547.html Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
