Linux IDE Archive

• Thread Index

• Re: Disk spin down issue on shut down/suspend to disk
  • From: Michael Sedkowski
• Re: ASUS P5W motherboard PMP
  • From: Tejun Heo
• [PATCH 05/14] libata-link: linkify reset
  • From: Tejun Heo
• [PATCH 14/14] libata-link: update Power Management to handle PMP links
  • From: Tejun Heo
• [PATCH 13/14] libata-link: update hotplug to handle PMP links
  • From: Tejun Heo
• [PATCH 12/14] libata-link: update EH to deal with PMP links
  • From: Tejun Heo
• [PATCH 10/14] libata-link: add PMP links
  • From: Tejun Heo
• [PATCH 11/14] libata-link: update ata_scsi_error() to handle PMP links
  • From: Tejun Heo
• [PATCH 09/14] libata-link: implement ata_link_abort()
  • From: Tejun Heo
• [PATCH 06/14] libata-link: linkify config/EH related functions
  • From: Tejun Heo
• [PATCH 01/14] libata-link: introduce ata_link
  • From: Tejun Heo
• [PATCH 07/14] libata-link: make two port flags HRST_TO_RESUME and SKIP_D2H_BSY link flags
  • From: Tejun Heo
• [PATCH 08/14] libata-link: separate out link initialization functions
  • From: Tejun Heo
• [PATCH 04/14] libata-link: linkify EH action helpers
  • From: Tejun Heo
• [PATCH 03/14] libata-link: linkify PHY-related functions
  • From: Tejun Heo
• [PATCH 02/14] libata-link: implement and use link/device iterators
  • From: Tejun Heo
• [PATCHSET 2/4] libata: implement ata_link, take 7
  • From: Tejun Heo
• Re: 2.6.23-rc2 regression: check_irq_resend() warning from cmd64x
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.6.23-rc2: check_irq_resend on resume (ali15x3)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCHSET] libata: implement ata_link, take 6
  • From: Tejun Heo
• Re: Disk spin down issue on shut down/suspend to disk
  • From: Tejun Heo
• Disk spin down issue on shut down/suspend to disk
  • From: Michał sed
• Re: Disk spin down issue on shut down/suspend to disk
  • From: Michał sed
• 2.6.23-rc2 regression: check_irq_resend() warning from cmd64x
  • From: Mikael Pettersson
• Re: [PATCH 5/11] ide: remove drive->init_speed zeroing
  • From: Sergei Shtylyov
• [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
  • From: Sergei Shtylyov
• [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
  • From: Sergei Shtylyov
• Re: [PATCH] ST340823A, HPA and libata
  • From: Alan Cox
• Re: [PATCH 1/2] pata_hpt37x: actually clock HPT374 by 50 MHz DPLL
  • From: Alan Cox
• [PATCH 1/2] pata_hpt37x: actually clock HPT374 by 50 MHz DPLL
  • From: Sergei Shtylyov
• [PATCH] ST340823A, HPA and libata
  • From: Mikko Rapeli
• [PATCH 2/2] pata_hpt{37x|3x2n}: fix clock reporting
  • From: Sergei Shtylyov
• Re: hpt374 sata (Highpoint Rocket 1540)
  • From: Sergei Shtylyov
• Re: [PATCH 2/11] it8213/piix/slc90e66: remove {it8213,piix,slc90e66}_dma_2_pio()
  • From: Sergei Shtylyov
• Re: libata git tree, mbox queue status and contents
  • From: Sergei Shtylyov
• Re: [PATCH] ide: move ide_config_drive_speed() calls to upper layers
  • From: Sergei Shtylyov
• Re: SiS driver K2.4 for 180/182/965/966....
  • From: Uwe Koziolek
• [PATCH 9/10] ide-cris: add PIO autotune fallback to ->ide_dma_check
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/11] ide: remove ->ide_dma_check
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 8/11] sl82c105: add PIO autotune fallback to ->ide_dma_check
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/11] ide-pmac: add PIO autotune fallback to ->ide_dma_check
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 7/11] cs5530/sc1200: add PIO autotune fallback to ->ide_dma_check
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/11] ide: remove ide_use_fast_pio()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/11] ide: remove drive->init_speed zeroing
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/11] hpt34x: fix CONFIG_HPT34X_AUTODMA=n handling
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/11] it8213/piix/slc90e66: remove {it8213,piix,slc90e66}_dma_2_pio()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/11] au1xxx-ide: use ide_tune_dma()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/11] atiixp: DMA setup fixes
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide-pmac: use ide_tune_dma() (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] hook ACPI _PSx method to IDE power on/off
  • From: Bartlomiej Zolnierkiewicz
• Re: ASUS P5W motherboard PMP
  • From: David Madsen
• 2.6.23-rc2: check_irq_resend on resume (ali15x3)
  • From: Andrey Borzenkov
• Re: [PATCHSET] libata: implement ata_link, take 6
  • From: James Bottomley
• Re: 2.6.23-rc1: pata_via cable detection differs from via82cxxx
  • From: Mikael Pettersson
• Marvell 6141 - Am I too early?
  • From: Micael Beronius
• Re: ASUS P5W motherboard PMP
  • From: Tejun Heo
• [PATCH 13/14] libata-link: update hotplug to handle PMP links
  • From: Tejun Heo
• [PATCH 12/14] libata-link: update EH to deal with PMP links
  • From: Tejun Heo
• [PATCH 10/14] libata-link: add PMP links
  • From: Tejun Heo
• [PATCH 09/14] libata-link: implement ata_link_abort()
  • From: Tejun Heo
• [PATCH 14/14] libata-link: update Power Management to handle PMP links
  • From: Tejun Heo
• [PATCH 11/14] libata-link: update ata_scsi_error() to handle PMP links
  • From: Tejun Heo
• [PATCH 06/14] libata-link: linkify config/EH related functions
  • From: Tejun Heo
• [PATCH 05/14] libata-link: linkify reset
  • From: Tejun Heo
• [PATCH 07/14] libata-link: make two port flags HRST_TO_RESUME and SKIP_D2H_BSY link flags
  • From: Tejun Heo
• [PATCH 03/14] libata-link: linkify PHY-related functions
  • From: Tejun Heo
• [PATCH 08/14] libata-link: separate out link initialization functions
  • From: Tejun Heo
• [PATCH 02/14] libata-link: implement and use link/device iterators
  • From: Tejun Heo
• [PATCH 01/14] libata-link: introduce ata_link
  • From: Tejun Heo
• [PATCH 04/14] libata-link: linkify EH action helpers
  • From: Tejun Heo
• [PATCHSET] libata: implement ata_link, take 6
  • From: Tejun Heo
• Re: libata git tree, mbox queue status and contents
  • From: Tejun Heo
• Re: [PATCH] hook ACPI _PSx method to IDE power on/off
  • From: Tejun Heo
• Re: Boot fails on Intel SATA controller
  • From: Tejun Heo
• Re: ASUS P5W motherboard PMP
  • From: David Madsen
• Re: ICH8 CF timeout (regression)...
  • From: Tejun Heo
• Re: [PATCH -mm] libata: add human-readable error value decoding v3
  • From: Chuck Ebbert
• Re: 2.6.23-rc1: pata_via cable detection differs from via82cxxx
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: move ide_config_drive_speed() calls to upper layers
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: move ide_config_drive_speed() calls to upper layers
  • From: Bartlomiej Zolnierkiewicz
• Re: ICH8 CF timeout (regression)...
  • From: Daniel J Blueman
• Re: 2.6.23-rc1: pata_via cable detection differs from via82cxxx
  • From: Alan Cox
• Re: [PATCH -mm] libata: add human-readable error value decoding v3
  • From: Alan Cox
• 2.6.23-rc1: pata_via cable detection differs from via82cxxx
  • From: Mikael Pettersson
• Re: [PATCH] slc90e66: always tune PIO
  • From: Sergei Shtylyov
• [PATCH -mm] libata: add human-readable error value decoding v3
  • From: Robert Hancock
• Re: libata git tree, mbox queue status and contents
  • From: Alan Cox
• libata git tree, mbox queue status and contents
  • From: Jeff Garzik
• Re: [PATCH] sata_qstor, pdc_adma, sata_sx4: convert to new EH
  • From: Jeff Garzik
• Re: [PATCH] sata_qstor, pdc_adma, sata_sx4: convert to new EH
  • From: Tejun Heo
• Re: Boot fails on Intel SATA controller
  • From: Tejun Heo
• Re: ICH8 CF timeout (regression)...
  • From: Tejun Heo
• Re: ICH8 CF timeout (regression)...
  • From: Daniel J Blueman
• RE: [PATCH] ide-cris: always tune PIO
  • From: Mikael Starvik
• Re: [PATCH] hook ACPI _PSx method to IDE power on/off
  • From: Shaohua Li
• Re: [PATCH] cs5530: always tune PIO
  • From: Alan Cox
• Re: ST340823A disk size issue
  • From: Bartlomiej Zolnierkiewicz
• Re: ST340823A disk size issue
  • From: Mikko Rapeli
• [PATCH] sc1200: always tune PIO
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] cs5530: always tune PIO
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] slc90e66: always tune PIO
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide-cris: always tune PIO
  • From: Bartlomiej Zolnierkiewicz
• Re: ST340823A disk size issue
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: add cable detection for early UDMA66 devices (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: ICH8 CF timeout (regression)...
  • From: Mark Lord
• Re: ICH8 CF timeout (regression)...
  • From: Daniel J Blueman
• Re: Early ATA devices
  • From: Alan Cox
• Re: ST340823A disk size issue
  • From: Alan Cox
• Re: ST340823A disk size issue
  • From: Mikko Rapeli
• Re: [PATCH 2/3] sis5513: always tune PIO
  • From: Sergei Shtylyov
• Re: Libata Sil3124 hybrid drive failure
  • From: Jeff Garzik
• Re: [PATCH] block: add protocol discriminators to requests and queues
  • From: James Bottomley
• [PATCH] Optional libata LED trigger for PowerMac G5
  • From: Tony Vroon
• Re: [PATCH] block: add protocol discriminators to requests and queues
  • From: Matthew Wilcox
• Libata Sil3124 hybrid drive failure
  • From: Fajun Chen
• [PATCH] block: add protocol discriminators to requests and queues
  • From: James Bottomley
• Re: ICH8 CF timeout (regression)...
  • From: Tejun Heo
• Re: Boot fails on Intel SATA controller
  • From: Quel Qun
• Re: [PATCH 1/3] sis5513: DMA setup fixes
  • From: Sergei Shtylyov
• Re: hpt374 sata (Highpoint Rocket 1540)
  • From: Alan Cox
• Re: [PATCH] hook ACPI _PSx method to IDE power on/off
  • From: Matthew Garrett
• Re: ST340823A disk size issue
  • From: Alan Cox
• Re: [PATCH] sata_qstor, pdc_adma, sata_sx4: convert to new EH
  • From: Tejun Heo
• Re: hpt374 sata (Highpoint Rocket 1540)
  • From: Sergei Shtylyov
• Re: ST340823A disk size issue
  • From: Sergei Shtylyov
• Re: ST340823A disk size issue
  • From: Mikko Rapeli
• Re: ST340823A disk size issue
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] sata_qstor, pdc_adma, sata_sx4: convert to new EH
  • From: Mark Lord
• Re: No equivalent for ide-scsi available with the new PATA drivers?
  • From: Mark Lord
• Re: ST340823A disk size issue
  • From: Sergei Shtylyov
• Re: [PATCH UPDATED] libata: add support for ATA_16 on ATAPI
  • From: Mark Lord
• Re: [PATCH] pata_isapnp: use MODULE_DEVICE_TABLE()
  • From: Alan Cox
• Re: ST340823A disk size issue
  • From: Alan Cox
• [PATCH] pata_isapnp: use MODULE_DEVICE_TABLE()
  • From: Jeff Garzik
• ICH8 CF timeout (regression)...
  • From: Daniel J Blueman
• SiS driver K2.4 for 180/182/965/966....
  • From: Franck Bourdonnec
• [PATCH] Add a PCI ID for santa rosa's PATA controller.
  • From: Tejun Heo
• [PATCH] hook ACPI _PSx method to IDE power on/off
  • From: Shaohua Li
• Re: [patch 3/4] Enable link power management for ata drivers
  • From: Tejun Heo
• Re: ST340823A disk size issue
  • From: Bartlomiej Zolnierkiewicz
• Re: ST340823A disk size issue
  • From: Bartlomiej Zolnierkiewicz
• Re: hpt374 sata (Highpoint Rocket 1540)
  • From: Alan Cox
• Re: hpt374 sata (Highpoint Rocket 1540)
  • From: Alan Cox
• Re: ST340823A disk size issue
  • From: Alan Cox
• Re: ST340823A disk size issue
  • From: Bartlomiej Zolnierkiewicz
• Re: ST340823A disk size issue
  • From: Alan Cox
• [git patches] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: ST340823A disk size issue
  • From: Mikko Rapeli
• [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
  • From: Kristen Carlson Accardi
• [patch 2/3] Enable link power management for ata drivers
  • From: Kristen Carlson Accardi
• [patch 1/3] Store interrupt value
  • From: Kristen Carlson Accardi
• [patch 0/3] Updated ALPM patches
  • From: Kristen Carlson Accardi
• Re: hpt374 sata (Highpoint Rocket 1540)
  • From: Bartlomiej Zolnierkiewicz
• Re: Marvell 7042 (sata_mv) fails to initialize drive
  • From: Markus Gutschke
• Re: [patch 1/4] Store interrupt value
  • From: Kristen Carlson Accardi
• Re: [patch 2/4] Expose Power Management Policy option to users
  • From: Kristen Carlson Accardi
• Re: [PATCH 12/12] hpt366: always tune PIO
  • From: Sergei Shtylyov
• Re: [patch 3/4] Enable link power management for ata drivers
  • From: Kristen Carlson Accardi
• Re: hpt374 sata (Highpoint Rocket 1540)
  • From: Sergei Shtylyov
• Re: [patch 2/4] Expose Power Management Policy option to users
  • From: Kristen Carlson Accardi
• Re: hpt374 sata (Highpoint Rocket 1540)
  • From: Bartlomiej Zolnierkiewicz
• Re: hpt374 sata (Highpoint Rocket 1540)
  • From: Sergei Shtylyov
• Re: hpt374 sata (Highpoint Rocket 1540)
  • From: Bob Ham
• Re: [PATCH] fix runtogether printk's in cmd64x IDE driver
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/3] sis5513: always tune PIO
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/3] aec62xx: always tune PIO
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/3] sis5513: DMA setup fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: ST340823A disk size issue
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.6.23-rc1-mm2 (checks-for-80wire-cable-use-in-pata_via)
  • From: Laurent Riffard
• Re: Marvell 7042 (sata_mv) fails to initialize drive
  • From: Michal Piotrowski
• Re: hpt374 sata (Highpoint Rocket 1540)
  • From: Sergei Shtylyov
• Re: hpt374 sata (Highpoint Rocket 1540)
  • From: Bob Ham
• Re: Early ATA devices
  • From: Alan Cox
• Re: [patch 2/4] Expose Power Management Policy option to users
  • From: James Bottomley
• Re: NV Cache Feature Support in libata
  • From: Fajun Chen
• Re: [patch 2/4] Expose Power Management Policy option to users
  • From: Matthew Wilcox
• Re: [patch 2/4] Expose Power Management Policy option to users
  • From: Kristen Carlson Accardi
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: hpt374 sata (Highpoint Rocket 1540)
  • From: Alan Cox
• Re: Access beyond end of device
  • From: Alan Cox
• Re: hpt374 sata (Highpoint Rocket 1540)
  • From: Sergei Shtylyov
• Re: [patch 2/4] Expose Power Management Policy option to users
  • From: Kristen Carlson Accardi
• Re: hpt374 sata (Highpoint Rocket 1540)
  • From: Bob Ham
• Re: [PATCH] mark PCI resource with start 0 as unassigned
  • From: Alan Cox
• Re: [PATCH] sata_mv: Test patch for Hightpoint RocketRaid 1740/1742
  • From: Alan Cox
• Re: Early ATA devices
  • From: Alan Cox
• Re: Boot fails on Intel SATA controller
  • From: Luiz Fernando N. Capitulino
• Re: Boot fails on Intel SATA controller
  • From: Tejun Heo
• Re: [PATCH] mark PCI resource with start 0 as unassigned
  • From: Sergei Shtylyov
• Re: Boot fails on Intel SATA controller
  • From: Quel Qun
• Re: Access beyond end of device
  • From: Luiz Fernando N. Capitulino
• Re: [PATCH UPDATED] libata: add support for ATA_16 on ATAPI
  • From: Tejun Heo
• Re: [PATCH] pata_sis: fix MWDMA for <= UDMA66 chipsets and UDMA for UDMA33 chipsets
  • From: Jeff Garzik
• Re: [PATCH] libata: blacklist SAMSUNG HD401LJ / ZZ100-15 for NCQ
  • From: Jeff Garzik
• Re: [PATCH] pci: rename __pci_reenable_device() to pci_reenable_device()
  • From: Jeff Garzik
• Re: [PATCH] libata-sff; Unbreak non DMA capable controllers again
  • From: Jeff Garzik
• Re: [PATCH] pata_cmd64x: Correct the speed ranges
  • From: Jeff Garzik
• Re: [patch 1/4] Store interrupt value
  • From: Jeff Garzik
• Re: [PATCH UPDATED] libata: add support for ATA_16 on ATAPI
  • From: Jeff Garzik
• Re: [PATCH] sata_mv: Test patch for Hightpoint RocketRaid 1740/1742
  • From: Jeff Garzik
• Re: Early ATA devices
  • From: Jeff Garzik
• Re: hpt374 sata (Highpoint Rocket 1540)
  • From: Sergei Shtylyov
• Re: [PATCH 2/2] [POWERPC] MPC8349E-mITX: use platform IDE driver for CF interface
  • From: Sergei Shtylyov
• Re: ST340823A disk size issue
  • From: Alan Cox
• Re: [PATCH 1/2] [IDE] Platform IDE driver
  • From: Sergei Shtylyov
• Re: [patch 3/4] Enable link power management for ata drivers
  • From: edwintorok
• ST340823A disk size issue
  • From: Mikko Rapeli
• Re: [patch 2/4] Expose Power Management Policy option to users
  • From: Tejun Heo
• Re: [patch 3/4] Enable link power management for ata drivers
  • From: Tejun Heo
• Re: [patch 1/4] Store interrupt value
  • From: Tejun Heo
• [PATCH UPDATED] libata: add support for ATA_16 on ATAPI
  • From: Tejun Heo
• Re: Boot fails on Intel SATA controller
  • From: Tejun Heo
• Re: Early ATA devices
  • From: Tejun Heo
• Re: [PATCH libata-dev#upstream 1/2] libata: don't skip EH report if action is pending
  • From: Tejun Heo
• Re: IRQ Delivery Problem for MCP65
  • From: Tejun Heo
• Re: errors on shutdown with PMP
  • From: Tejun Heo
• Re: [PATCH libata-dev#upstream 2/2] libata: move EH repeat reporting into ata_eh_report()
  • From: Tejun Heo
• Re: [patch 2/4] Expose Power Management Policy option to users
  • From: Tejun Heo
• Re: [patch 2/4] Expose Power Management Policy option to users
  • From: Tejun Heo
• Re: IRQ Delivery Problem for MCP65
  • From: Craig Block
• Early ATA devices
  • From: Alan Cox
• Re: Access beyond end of device
  • From: Alan Cox
• Re: [PATCH 2/2] [POWERPC] MPC8349E-mITX: use platform IDE driver for CF interface
  • From: Alan Cox
• Re: [PATCH 2/2] [POWERPC] MPC8349E-mITX: use platform IDE driver for CF interface
  • From: Segher Boessenkool
• Re: [PATCH 2/2] [POWERPC] MPC8349E-mITX: use platform IDE driver for CF interface
  • From: Segher Boessenkool
• Re: [PATCH 1/2] [IDE] Platform IDE driver
  • From: Segher Boessenkool
• Re: hpt374 sata (Highpoint Rocket 1540)
  • From: Bob Ham
• Re: hpt374 sata (Highpoint Rocket 1540)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH libata-dev#upstream 2/2] libata: move EH repeat reporting into ata_eh_report()
  • From: Mikael Pettersson
• Re: hpt374 sata (Highpoint Rocket 1540)
  • From: Bob Ham
• Re: hpt374 sata (Highpoint Rocket 1540)
  • From: Bob Ham
• Re: [patch 2/4] Expose Power Management Policy option to users
  • From: Kristen Carlson Accardi
• Re: Time Problems with 2.6.23-rc1-gf695baf2
  • From: Eric Sesterhenn / Snakebyte
• [PATCH] pata_sis: fix MWDMA for <= UDMA66 chipsets and UDMA for UDMA33 chipsets
  • From: Bartlomiej Zolnierkiewicz
• Re: [patch 2/4] Expose Power Management Policy option to users
  • From: Kristen Carlson Accardi
• Re: Time Problems with 2.6.23-rc1-gf695baf2
  • From: Venki Pallipadi
• Re: [patch 2/4] Expose Power Management Policy option to users
  • From: Tejun Heo
• Re: Access beyond end of device
  • From: Luiz Fernando N. Capitulino
• Access beyond end of device
  • From: Luiz Fernando N. Capitulino
• Re: [patch 2/4] Expose Power Management Policy option to users
  • From: Tejun Heo
• Re: hpt374 sata (Highpoint Rocket 1540)
  • From: Sergei Shtylyov
• Re: [patch 2/4] Expose Power Management Policy option to users
  • From: Tejun Heo
• Re: [patch 2/4] Expose Power Management Policy option to users
  • From: Kristen Carlson Accardi
• Re: errors on shutdown with PMP
  • From: Marc Bejarano
• Re: [patch 2/4] Expose Power Management Policy option to users
  • From: Kristen Carlson Accardi
• Re: [patch 2/4] Expose Power Management Policy option to users
  • From: Arjan van de Ven
• Re: Time Problems with 2.6.23-rc1-gf695baf2
  • From: Eric Sesterhenn / Snakebyte
• Re: [PATCH] libata: Correct IORDY handling
  • From: Alan Cox
• Re: hpt374 sata (Highpoint Rocket 1540)
  • From: Brad Campbell
• RE: Time Problems with 2.6.23-rc1-gf695baf2
  • From: Pallipadi, Venkatesh
• Re: [patch 2/4] Expose Power Management Policy option to users
  • From: Tejun Heo
• Re: Time Problems with 2.6.23-rc1-gf695baf2
  • From: Eric Sesterhenn / Snakebyte
• Re: [patch 2/4] Expose Power Management Policy option to users
  • From: Tejun Heo
• Re: [patch 2/4] Expose Power Management Policy option to users
  • From: James Bottomley
• Re: [PATCH] libata: Correct IORDY handling
  • From: Sergei Shtylyov
• Re: [patch 2/4] Expose Power Management Policy option to users
  • From: Arjan van de Ven
• Boot fails on Intel SATA controller
  • From: Luiz Fernando N. Capitulino
• Re: hpt374 sata (Highpoint Rocket 1540)
  • From: Sergei Shtylyov
• [PATCH] libata: Correct IORDY handling
  • From: Alan Cox
• Re: hpt374 sata (Highpoint Rocket 1540)
  • From: Alan Cox
• hpt374 sata (Highpoint Rocket 1540)
  • From: Bob Ham
• Re: errors on shutdown with PMP
  • From: Petr Vandrovec
• [PATCH libata-dev#upstream 2/2] libata: move EH repeat reporting into ata_eh_report()
  • From: Tejun Heo
• [PATCH libata-dev#upstream 1/2] libata: don't skip EH report if action is pending
  • From: Tejun Heo
• Re: [patch 2/4] Expose Power Management Policy option to users
  • From: Tejun Heo
• Re: errors on shutdown with PMP
  • From: Tejun Heo
• Re: errors on shutdown with PMP
  • From: Marc Bejarano
• [PATCHSET/RFC] Refactor block layer to improve support for stacked devices.
  • From: Neil Brown
• Re: [Qemu-devel] fedora 7, cdrom and GPCMD_GET_EVENT_STATUS_NOTIFICATION
  • From: Matthew Kent
• Re: [patch 2/4] Expose Power Management Policy option to users
  • From: Jeff Garzik
• Re: Time Problems with 2.6.23-rc1-gf695baf2
  • From: Michal Piotrowski
• Re: [PATCH] ide: add cable detection for early UDMA66 devices (take 2)
  • From: Sergei Shtylyov
• Re: [2.6.23-rc1] ata_piix: EH pending after completion, repeating EH (cnt=4)
  • From: Mikael Pettersson
• Re: [PATCH libata-dev#upstream 3/3] libata: implement and use ata_port_desc() to report port configuration
  • From: Alan Cox
• Re: ATA scsi driver misbehavior under kdump capture kernel
  • From: Tejun Heo
• Re: [2.6.23-rc1] ata_piix: EH pending after completion, repeating EH (cnt=4)
  • From: Tejun Heo
• [PATCH libata-dev#upstream 3/3] libata: implement and use ata_port_desc() to report port configuration
  • From: Tejun Heo
• [PATCH libata-dev#upstream 2/3] libata: add printf format attribute to ehi desc functions
  • From: Tejun Heo
• [PATCH libata-dev#upstream 1/3] libata: use ata_port_printk() in ata_wait_idle()
  • From: Tejun Heo
• Re: [PATCH libata-dev#upstream] libata: implement and use ata_port_desc() to report port configuration
  • From: Tejun Heo
• [PATCH] fix runtogether printk's in cmd64x IDE driver
  • From: Meelis Roos
• Re: [PATCH 4/12] cs5535: add missing ->dma_base check
  • From: Sergei Shtylyov
• Re: [PATCH 6/12] pdc202xx_old: add missing ->dma_base check
  • From: Sergei Shtylyov
• Re: [PATCH 8/12] triflex: add missing ->dma_base check
  • From: Sergei Shtylyov
• [PATCH 11/12] alim15x3: remove redundant m5229_revision check
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 12/12] hpt366: always tune PIO
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/12] sc1200: fix ->dma_base equal zero handling
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 9/12] cs5520: fix ->dma_base equal zero handling
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 8/12] triflex: add missing ->dma_base check
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 7/12] sgiioc4: add missing ->dma_base check
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/12] pdc202xx_old: add missing ->dma_base check
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/12] pdc202xx_new: add missing ->dma_base check
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/12] cs5530: add missing ->dma_base check
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/12] cs5535: add missing ->dma_base check
  • From: Bartlomiej Zolnierkiewicz
• Re: 40-wire/80-wire detection
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/12] ide: remove CONFIG_IDEDMA_IVB config option
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/12] ide: change master/slave IDENTIFY order
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: add cable detection for early UDMA66 devices (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: ide patches
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] amd74xx/via82cxxx: check ide_config_drive_speed() return value
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH libata-dev#upstream] libata: implement and use ata_port_desc() to report port configuration
  • From: Alan Cox
• Re: [PATCH 1/11] ide-pmac: don't check kauai_lookup_timing() return value
  • From: Sergei Shtylyov
• Re: [PATCH libata-dev#upstream] libata: implement and use ata_port_desc() to report port configuration
  • From: Tejun Heo
• [-mm patch] make scsi_host_link_pm_policy() static
  • From: Adrian Bunk
• Re: [PATCH libata-dev#upstream] libata: implement and use ata_port_desc() to report port configuration
  • From: Alan Cox
• Re: [PATCH] ide: move ide_config_drive_speed() calls to upper layers
  • From: Sergei Shtylyov
• Re: ide patches
  • From: Sergei Shtylyov
• Re: [PATCH] pdc202xx_new: check ide_config_drive_speed() return value
  • From: Sergei Shtylyov
• [PATCH libata-dev#upstream] libata: implement and use ata_port_desc() to report port configuration
  • From: Tejun Heo
• Re: [PATCH] pdc202xx_new: check ide_config_drive_speed() return value
  • From: Sergei Shtylyov
• Re: [PATCH] cs5535: check ide_config_drive_speed() return value
  • From: Sergei Shtylyov
• Re: [PATCH] amd74xx/via82cxxx: check ide_config_drive_speed() return value
  • From: Sergei Shtylyov
• [PATCH libata-dev#upstream] libata: add printf format attribute to ehi desc functions
  • From: Tejun Heo
• Re: [PATCH] fix IDE legacy mode resource
  • From: Yoichi Yuasa
• Re: [2/3] 2.6.23-rc1: known regressions v2
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] alim15x3: Correct HP detect
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: make CONFIG_IDE_GENERIC default to N
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] cs5535: check ide_config_drive_speed() return value
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] pdc202xx_new: check ide_config_drive_speed() return value
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] au1xxx: fix au1xxx_set_pio_mode()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH -mm] Fix libata warnings with CONFIG_PM=n
  • From: Gabriel C
• Re: [PATCH] ide: move ide_config_drive_speed() calls to upper layers
  • From: Sergei Shtylyov
• Re: [PATCH] fix IDE legacy mode resource
  • From: Jeff Garzik
• Re: [PATCH] ide: make CONFIG_IDE_GENERIC default to N
  • From: Jeff Garzik
• [PATCH] fix IDE legacy mode resource
  • From: Yoichi Yuasa
• Re: [PATCH] libata: Store bus addresses (versus -mm for testing)
  • From: Alan Cox
• Re: [PATCH] use ARRAY_SIZE in ide-cd.c
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: move ide_config_drive_speed() calls to upper layers
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] libata: Store bus addresses (versus -mm for testing)
  • From: Tejun Heo
• [PATCH] ide: make CONFIG_IDE_GENERIC default to N
  • From: Tejun Heo
• Re: errors on shutdown with PMP
  • From: Tejun Heo
• [PATCH] libata: blacklist SAMSUNG HD401LJ / ZZ100-15 for NCQ
  • From: Tejun Heo
• IRQ Delivery Problem for MCP65
  • From: Craig Block
• errors on shutdown with PMP
  • From: Marc Bejarano
• Re: [2/3] 2.6.23-rc1: known regressions v2
  • From: Michal Piotrowski
• Re: [PATCH 1/4] libata: ACPI checks for 80wire cable
  • From: Jeff Garzik
• [PATCH] use ARRAY_SIZE in ide-cd.c
  • From: Mark Hindley
• Re: [PATCH] pata_cmd64x: Correct the speed ranges
  • From: Sergei Shtylyov
• Re: [PATCH] pata_cmd64x: Correct the speed ranges
  • From: Jeff Garzik
• Re: [PATCH] ide: make CONFIG_IDE_GENERIC default to N
  • From: Jeff Garzik
• Re: [PATCH] pata_cmd64x: Correct the speed ranges
  • From: Sergei Shtylyov
• Re: [PATCH] ide: move ide_config_drive_speed() calls to upper layers
  • From: Alan Cox
• Re: [PATCH] pci: rename __pci_reenable_device() to pci_reenable_device()
  • From: Greg KH
• [PATCH] ata_piix: add Tecra M3 to broken suspend blacklist
  • From: Tejun Heo
• [PATCH] ata_piix: implement piix_borken_suspend()
  • From: Tejun Heo
• [PATCH] pci: rename __pci_reenable_device() to pci_reenable_device()
  • From: Tejun Heo
• Re: Problems with nVidia nForce 520 Chipset
  • From: Tejun Heo
• [PATCH] ide: make CONFIG_IDE_GENERIC default to N
  • From: Tejun Heo
• Re: [PATCH] ide: move ide_config_drive_speed() calls to upper layers
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: move ide_config_drive_speed() calls to upper layers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: move ide_config_drive_speed() calls to upper layers
  • From: Bartlomiej Zolnierkiewicz
• Problem with size after growing a device on 3ware-9500
  • From: Lars Michael Jogbäck
• Re: [PATCH] pata_cmd64x: Correct the speed ranges
  • From: Jeff Garzik
• Re: [PATCH 11/11] ide-pmac: remove pmac_ide_do_setfeature() (take 2)
  • From: Benjamin Herrenschmidt
• Re: [PATCH] pata_cmd64x: Correct the speed ranges
  • From: Sergei Shtylyov
• Re: [PATCH] pata_cmd64x: Correct the speed ranges
  • From: Mikael Pettersson
• Re: [PATCH] cs5535: check ide_config_drive_speed() return value
  • From: Sergei Shtylyov
• Re: [PATCH] pdc202xx_new: check ide_config_drive_speed() return value
  • From: Sergei Shtylyov
• Re: [PATCH] au1xxx: fix au1xxx_set_pio_mode()
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] [IDE] Platform IDE driver (was: MMIO IDE driver)
  • From: Guennadi Liakhovetski
• Re: [PATCH 1/2] [IDE] Platform IDE driver (was: MMIO IDE driver)
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] pdc202xx_new: check ide_config_drive_speed() return value
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] cs5535: check ide_config_drive_speed() return value
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] amd74xx/via82cxxx: check ide_config_drive_speed() return value
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] au1xxx: fix au1xxx_set_pio_mode()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] icside: use ide_tune_dma()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] icside: fix ->speedproc to return on unsupported modes (take 5)
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: add ide_set{_max}_pio() (take 4)
  • From: Bartlomiej Zolnierkiewicz
• Re: CONFIG_IDE_PROC_FS: /sys is not full replacement of /proc
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] [IDE] Platform IDE driver (was: MMIO IDE driver)
  • From: Bartlomiej Zolnierkiewicz
• Re: Re+: SATA hard drive no longer comes up as /dev/sda on 2.6.22 with Intel ICH6M
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] [IDE] Platform IDE driver (was: MMIO IDE driver)
  • From: Bartlomiej Zolnierkiewicz
• Re: drivers/ide/pci/cs5535.c: array overrun
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 11/11] ide-pmac: remove pmac_ide_do_setfeature() (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] [IDE] Platform IDE driver (was: MMIO IDE driver)
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] [IDE] Platform IDE driver (was: MMIO IDE driver)
  • From: Guennadi Liakhovetski
• [PATCH] pata_mpiix: Forget a conversion
  • From: Alan Cox
• [PATCH] libata: Store bus addresses (versus -mm for testing)
  • From: Alan Cox
• Re: sata_nv or port issue?
  • From: Zivago Lee
• Re: [PATCH] pata_cmd64x: Correct the speed ranges
  • From: Sergei Shtylyov
• Re: [PATCH 2/2] [POWERPC] MPC8349E-mITX: use platform IDE driver for CF interface
  • From: Sergei Shtylyov
• [PATCH] pata_cmd64x: Correct the speed ranges
  • From: Alan Cox
• [PATCH] libata-sff; Unbreak non DMA capable controllers again
  • From: Alan Cox
• Re: [PATCH 2/2] [POWERPC] MPC8349E-mITX: use platform IDE driver for CF interface
  • From: Vitaly Bordug
• Re: [PATCH 2/2] [POWERPC] MPC8349E-mITX: use platform IDE driver for CF interface
  • From: Vitaly Bordug
• [PATCH 4/4] libata: ACPI checks for 80wire cable
  • From: Alan Cox
• [PATCH 3/4] libata: ACPI checks for 80wire cable
  • From: Alan Cox
• [PATCH 2/4] libata: ACPI checks for 80wire cable
  • From: Alan Cox
• [PATCH 1/4] libata: ACPI checks for 80wire cable
  • From: Alan Cox
• Re: Problems with nVidia nForce 520 Chipset
  • From: Craig Block
• Re: [PATCH 2/2] [POWERPC] MPC8349E-mITX: use platform IDE driver for CF interface
  • From: Sergei Shtylyov
• Re: [2.6.23-rc1] ata_piix: EH pending after completion, repeating EH (cnt=4)
  • From: Mikael Pettersson
• Please pull for stable ATA
  • From: Jeff Garzik
• Re: Problems with nVidia nForce 520 Chipset
  • From: Tejun Heo
• Re: sata_nv or port issue?
  • From: Tejun Heo
• Re: [2.6.23-rc1] ata_piix: EH pending after completion, repeating EH (cnt=4)
  • From: Tejun Heo
• Re: Re+: SATA hard drive no longer comes up as /dev/sda on 2.6.22 with Intel ICH6M
  • From: Tejun Heo
• Problems with nVidia nForce 520 Chipset
  • From: Craig Block
• Re: Time Problems with 2.6.23-rc1-gf695baf2
  • From: Eric Sesterhenn / Snakebyte
• Re: [PATCH 1/2] [IDE] Platform IDE driver (was: MMIO IDE driver)
  • From: Alan Cox
• sata_nv or port issue?
  • From: Zivago Lee
• Re: [PATCH 1/2] [IDE] Platform IDE driver (was: MMIO IDE driver)
  • From: Guennadi Liakhovetski
• Re: [PATCH 1/2] [IDE] Platform IDE driver (was: MMIO IDE driver)
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] [IDE] Platform IDE driver (was: MMIO IDE driver)
  • From: Guennadi Liakhovetski
• Re: [PATCH 1/2] [IDE] Platform IDE driver (was: MMIO IDE driver)
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] [IDE] Platform IDE driver (was: MMIO IDE driver)
  • From: Guennadi Liakhovetski
• Re: [PATCH 1/2] [IDE] Platform IDE driver
  • From: Sergei Shtylyov
• Re: [PATCH 2/2] [POWERPC] MPC8349E-mITX: use platform IDE driver for CF interface
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] [IDE] Platform IDE driver
  • From: Scott Wood
• Re: libata problem or hard drive failure?
  • From: Alan Cox
• Re: [PATCH 1/2] [IDE] Platform IDE driver (was: MMIO IDE driver)
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] [IDE] Platform IDE driver (was: MMIO IDE driver)
  • From: Scott Wood
• libata problem or hard drive failure?
  • From: cyrix12
• Re: [PATCH 1/2] [IDE] Platform IDE driver (was: MMIO IDE driver)
  • From: Sergei Shtylyov
• Re: [PATCH 2/2] [POWERPC] MPC8349E-mITX: use platform IDE driver for CF interface
  • From: Scott Wood
• Re: [PATCH 2/2] [POWERPC] MPC8349E-mITX: use platform IDE driver for CF interface
  • From: Scott Wood
• Re: [PATCH 2/2] [POWERPC] MPC8349E-mITX: use platform IDE driver for CF interface
  • From: Sergei Shtylyov
• Re: [PATCH 2/2] [POWERPC] MPC8349E-mITX: use platform IDE driver for CF interface
  • From: Sergei Shtylyov
• PROBLEM: First SATA drive, /dev/sda in RAID 5 stops working a few times a year
  • From: Kyle Brooks
• Re: [PATCH 2/2] [POWERPC] MPC8349E-mITX: use platform IDE driver for CF interface
  • From: Scott Wood
• Re: [PATCH 1/2] [IDE] Platform IDE driver (was: MMIO IDE driver)
  • From: Kumar Gala
• Re: [PATCH 2/2] [POWERPC] MPC8349E-mITX: use platform IDE driver for CF interface
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] [IDE] Platform IDE driver (was: MMIO IDE driver)
  • From: Alan Cox
• Re: [PATCH 2/2] [POWERPC] MPC8349E-mITX: use platform IDE driver for CF interface
  • From: Scott Wood
• Re: [PATCH 2/2] [POWERPC] MPC8349E-mITX: use platform IDE driver for CF interface
  • From: Sergei Shtylyov
• [PATCH 2/2] [POWERPC] MPC8349E-mITX: use platform IDE driver for CF interface
  • From: Vitaly Bordug
• [PATCH 1/2] [IDE] Platform IDE driver (was: MMIO IDE driver)
  • From: Vitaly Bordug
• Re: Time Problems with 2.6.23-rc1-gf695baf2
  • From: Len Brown
• Re: unexpected scsi timeout
  • From: James Bottomley
• Re: Time Problems with 2.6.23-rc1-gf695baf2
  • From: Eric Sesterhenn / Snakebyte
• Re: unexpected scsi timeout
  • From: Tejun Heo
• Re: unexpected scsi timeout
  • From: Vasily Averin
• Re: unexpected scsi timeout
  • From: Albert Lee
• Re: Time Problems with 2.6.23-rc1-gf695baf2
  • From: Bartlomiej Zolnierkiewicz
• Re: Time Problems with 2.6.23-rc1-gf695baf2
  • From: Bartlomiej Zolnierkiewicz
• Re: Time Problems with 2.6.23-rc1-gf695baf2
  • From: Michal Piotrowski
• Re: [PATCH] pata_hpt37x: Fix 2.6.22 clock PLL regression
  • From: Linus Torvalds
• Re: [PATCH 1/6] icside: fix ->speedproc to return on unsupported modes
  • From: Russell King
• Re: [PATCH 2/2] ata_piix: fix suspend/resume for some TOSHIBA laptops
  • From: Jeff Garzik
• Re: [PATCH 2/2] ata_piix: fix suspend/resume for some TOSHIBA laptops
  • From: Alan Cox
• Re: [PATCH 2/2] ata_piix: fix suspend/resume for some TOSHIBA laptops
  • From: Jeff Garzik
• Re: [PATCH] pata_ali: Correct HP detect
  • From: Jeff Garzik
• Re: [PATCH] pata_hpt37x: Fix 2.6.22 clock PLL regression
  • From: Jeff Garzik
• [git patches] libata fixes
  • From: Jeff Garzik
• Re+: SATA hard drive no longer comes up as /dev/sda on 2.6.22 with Intel ICH6M
  • From: P.C.Chan
• Re: [2.6.23-rc1] ata_piix: EH pending after completion, repeating EH (cnt=4)
  • From: Mikael Pettersson
• Re: drivers/ide/pci/cs5535.c: array overrun
  • From: Jordan Crouse
• Re: [PATCH] pata_hpt37x: Fix 2.6.22 clock PLL regression
  • From: Sergei Shtylyov
• Re: 40-wire/80-wire detection
  • From: Sergei Shtylyov
• [PATCH] pata_hpt37x: Fix 2.6.22 clock PLL regression
  • From: Alan Cox
• drivers/ide/pci/cs5535.c: array overrun
  • From: Adrian Bunk
• Re: unexpected scsi timeout
  • From: Vasily Averin
• Re: [2.6.23-rc1] ata_piix: EH pending after completion, repeating EH (cnt=4)
  • From: Tejun Heo
• Re: unexpected scsi timeout
  • From: Tejun Heo
• [PATCH] sata_qstor, pdc_adma, sata_sx4: convert to new EH
  • From: Jeff Garzik
• [PATCH] sata_mv: non-working NCQ support
  • From: Jeff Garzik
• Re: [PATCH 11/11] ide-pmac: remove pmac_ide_do_setfeature() (take 2)
  • From: Benjamin Herrenschmidt
• [PATCH 12/11] ide-pmac: use ide_tune_dma()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/11] ide-pmac: remove pmac_ide_do_setfeature() (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: ide patches
  • From: Benjamin Herrenschmidt
• Re: ide patches
  • From: Sergei Shtylyov
• Re: ide patches
  • From: Benjamin Herrenschmidt
• Re: [PATCH 4/4] ide: use only ->set_pio_mode method for programming PIO modes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 4/4] ide: use only ->set_pio_mode method for programming PIO modes
  • From: Bartlomiej Zolnierkiewicz
• Re: ide patches
  • From: Benjamin Herrenschmidt
• Re: ide patches
  • From: Benjamin Herrenschmidt
• Re: [PATCH 10/11] ide-pmac: remove nIEN clearing from pmac_ide_do_setfeature()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 7/11] ide: add __ide_wait_stat() helper
  • From: Bartlomiej Zolnierkiewicz
• Re: ide patches
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 6/11] ide: ide_config_drive_speed() bugfixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 9/11] ide-pmac: use __ide_wait_stat()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/11] ide-pmac: remove pmac_ide_{m,u}dma_enable() (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/11] ide-pmac: fix set_timings_mdma()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/11] ide-pmac: pmac_ide_tune_chipset() fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/11] ide-pmac: don't check kauai_lookup_timing() return value
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide-pmac: PIO mode setup fixes (take 3)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide-pmac: fix drive->init_speed reporting
  • From: Bartlomiej Zolnierkiewicz
• Re: PATA driver for Atmel AVR32
  • From: Alan Cox
• Re: PATA driver for Atmel AVR32
  • From: Sergei Shtylyov
• Re: [PATCH 4/4] ide: use only ->set_pio_mode method for programming PIO modes
  • From: Sergei Shtylyov
• Re: No equivalent for ide-scsi available with the new PATA drivers?
  • From: James Bottomley
• Re: No equivalent for ide-scsi available with the new PATA drivers?
  • From: Chuck Ebbert
• Re: No equivalent for ide-scsi available with the new PATA drivers?
  • From: James Bottomley
• Re: No equivalent for ide-scsi available with the new PATA drivers?
  • From: Alan Cox
• No equivalent for ide-scsi available with the new PATA drivers?
  • From: Chuck Ebbert
• Re: ide patches
  • From: Sergei Shtylyov
• Re: [PATCH 7/11] ide: add __ide_wait_stat() helper
  • From: Sergei Shtylyov
• Re: ide patches
  • From: Sergei Shtylyov
• [2.6.23-rc1] ata_piix: EH pending after completion, repeating EH (cnt=4)
  • From: Mikael Pettersson
• Re: ide patches
  • From: Benjamin Herrenschmidt
• Re: ide patches
  • From: Benjamin Herrenschmidt
• Re: ide patches
  • From: Benjamin Herrenschmidt
• ide patches
  • From: Benjamin Herrenschmidt
• Re: [PATCH 5/11] ide-pmac: remove pmac_ide_{m,u}dma_enable()
  • From: Benjamin Herrenschmidt
• Re: [PATCH 11/11] ide-pmac: remove pmac_ide_do_setfeature()
  • From: Benjamin Herrenschmidt
• Re: [PATCH 10/11] ide-pmac: remove nIEN clearing from pmac_ide_do_setfeature()
  • From: Benjamin Herrenschmidt
• Re: [PATCH 9/11] ide-pmac: use __ide_wait_stat()
  • From: Benjamin Herrenschmidt
• Re: [PATCH 8/11] ide-pmac: remove extra good status wait from pmac_ide_do_setfeature()
  • From: Benjamin Herrenschmidt
• Re: [PATCH 5/11] ide-pmac: remove pmac_ide_{m,u}dma_enable()
  • From: Benjamin Herrenschmidt
• Re: [PATCH 4/11] ide-pmac: remove control register messing from pmac_ide_dma_check()
  • From: Benjamin Herrenschmidt
• Re: [PATCH 3/11] ide-pmac: fix set_timings_mdma()
  • From: Benjamin Herrenschmidt
• Re: [PATCH 2/11] ide-pmac: pmac_ide_tune_chipset() fixes
  • From: Benjamin Herrenschmidt
• Re: [PATCH 1/11] ide-pmac: don't check kauai_lookup_timing() return value
  • From: Benjamin Herrenschmidt
• Re: [PATCH] ide-pmac: PIO mode setup fixes (take 2)
  • From: Benjamin Herrenschmidt
• Re: [PATCH] ide-pmac: fix drive->init_speed reporting
  • From: Benjamin Herrenschmidt
• Re: [PATCH 4/4] ide: use only ->set_pio_mode method for programming PIO modes
  • From: Sergei Shtylyov
• Re: [PATCH 10/11] ide-pmac: remove nIEN clearing from pmac_ide_do_setfeature()
  • From: Sergei Shtylyov
• Re: [PATCH 6/11] ide: ide_config_drive_speed() bugfixes
  • From: Sergei Shtylyov
• Re: [PATCH 1/4] alim15x3: PIO mode setup fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/4] it8213/piix/slc90e66: don't change DMA settings when programming PIO
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/4] sis5513: don't change UDMA settings when programming PIO
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/11] ide-pmac: remove pmac_ide_do_setfeature()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/11] ide-pmac: remove nIEN clearing from pmac_ide_do_setfeature()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 9/11] ide-pmac: use __ide_wait_stat()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 8/11] ide-pmac: remove extra good status wait from pmac_ide_do_setfeature()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 7/11] ide: add __ide_wait_stat() helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/11] ide: ide_config_drive_speed() bugfixes
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/11] ide-pmac: remove pmac_ide_{m,u}dma_enable()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/11] ide-pmac: remove control register messing from pmac_ide_dma_check()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/11] ide-pmac: fix set_timings_mdma()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/11] ide-pmac: pmac_ide_tune_chipset() fixes
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/11] ide-pmac: don't check kauai_lookup_timing() return value
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide-pmac: PIO mode setup fixes (take 2)
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide-pmac: fix drive->init_speed reporting
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] icside: fix ->speedproc to return on unsupported modes (take 4)
  • From: Bartlomiej Zolnierkiewicz
• Re: Recommendations on user-space soft/hardreset
  • From: Tejun Heo
• Re: libata [ata_piix] still no resume from S3 ?
  • From: Tejun Heo
• [BUG] Open Kernel Bugs
  • From: Natalie Protasevich
• Re: libata [ata_piix] still no resume from S3 ?
  • From: Rúben Fonseca
• Re: pata_via with software raid1: "attempt to access beyond end of device"
  • From: Alan Cox
• Re: pata_via with software raid1: "attempt to access beyond end of device"
  • From: Dâniel Fraga
• [PATCH] fix remaining scr_read/write users and the documentation
  • From: James Bottomley
• Re: [PATCH 3/4] sis5513: don't change UDMA settings when programming PIO
  • From: Sergei Shtylyov
• [git patches] libata updates
  • From: Jeff Garzik
• Re: [PATCH 2/4] it8213/piix/slc90e66: don't change DMA settings when programming PIO
  • From: Sergei Shtylyov
• [PATCH broken-out-2007-07-20-00-22] drivers/ata/libata-core.c build fix
  • From: Michal Piotrowski
• Re: pata_via with software raid1: "attempt to access beyond end of device"
  • From: Alan Cox
• Recommendations on user-space soft/hardreset
  • From: Fajun Chen
• [PATCH] iomap: Allow space for 64bit I/O ports
  • From: Alan Cox
• Re: [PATCH 1/1] ide: pdc202xx_new PLL input clock fix
  • From: Bahadir Balban
• PATCH: iomap (Corrected - ignore last one)
  • From: Alan Cox
• [PATCH] pata_cs5520: Fix probe bug introduced by 2.6.22 (regression)
  • From: Alan Cox
• [PATCH] pata_ali: Correct HP detect
  • From: Alan Cox
• [PATCH] pata_acpi: Rework the ACPI drivers based upon experience of what the BIOS can do
  • From: Alan Cox
• Re: [PATCH 1/4] alim15x3: PIO mode setup fixes
  • From: Sergei Shtylyov
• Re: [PATCH 17/21] libata: improve SCSI scan failure handling
  • From: Tejun Heo
• Re: [PATCH 17/21] libata: improve SCSI scan failure handling
  • From: Jeff Garzik
• Re: [patch 10/11] iomap: sort out the broken address reporting caused by the iomap layer
  • From: Jeff Garzik
• Re: [PATCH 02/21] libata: add @is_cmd to ata_tf_to_fis()
  • From: Jeff Garzik
• Re: [PATCH] ahci: reimplement port_map handling
  • From: Tejun Heo
• Re: [PATCH 15/21] libata: improve SATA PHY speed down logic
  • From: Jeff Garzik
• Re: [PATCH 02/21] libata: add @is_cmd to ata_tf_to_fis()
  • From: Tejun Heo
• Re: [patch 10/11] iomap: sort out the broken address reporting caused by the iomap layer
  • From: Alan Cox
• Re: PATA driver for Atmel AVR32
  • From: Kristoffer Nyborg Gregertsen
• Re: [patch 11/11] ata: use iomap_name()
  • From: Jeff Garzik
• Re: [patch 10/11] iomap: sort out the broken address reporting caused by the iomap layer
  • From: Jeff Garzik
• Re: [PATCH] ahci: reimplement port_map handling
  • From: Jeff Garzik
• Re: [patch] add more device IDs for supporting SB700 (resend)
  • From: Jeff Garzik
• unexpected scsi timeout
  • From: Vasily Averin
• Re: [PATCH 02/21] libata: add @is_cmd to ata_tf_to_fis()
  • From: Jeff Garzik
• Re: [PATCH 12/21] libata: make ->scr_read/write callbacks return error code
  • From: Jeff Garzik
• Re: [PATCH 02/21] libata: add @is_cmd to ata_tf_to_fis()
  • From: Jeff Garzik
• Re: [PATCH] pata_scc.c: small fixes (Workaround for errata A308)
  • From: Jeff Garzik
• Re: [PATCH] ahci.c: fix CONFIG_PM=n compilation
  • From: Jeff Garzik
• Re: [PATCH 2.6.22-git13] libata: add ST9160821AS 3.CLF to NONCQ blacklist
  • From: Jeff Garzik
• Re: [patch] libata: fix last_ctl caching in ata_tf_read()
  • From: Jeff Garzik
• Re: [PATCH] Fix SMART reporting on 2.6.22
  • From: Jeff Garzik
• Re: PATA driver for Atmel AVR32
  • From: Alan Cox
• Re: PATA driver for Atmel AVR32
  • From: Kristoffer Nyborg Gregertsen
• [PATCH 4/4] ide: use only ->set_pio_mode method for programming PIO modes
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/4] sis5513: don't change UDMA settings when programming PIO
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/4] it8213/piix/slc90e66: don't change DMA settings when programming PIO
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/4] alim15x3: PIO mode setup fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: PATA driver for Atmel AVR32
  • From: Kristoffer Nyborg Gregertsen
• Re: [PATCH] ahci: reimplement port_map handling
  • From: Tejun Heo
• PATA driver for Atmel AVR32
  • From: Kristoffer Nyborg Gregertsen
• [PATCH] ahci: reimplement port_map handling
  • From: Tejun Heo
• Re: libata [ata_piix] still no resume from S3 ?
  • From: Tejun Heo
• [PATCH 2.6.22-git13] libata: add ST9160821AS 3.CLF to NONCQ blacklist
  • From: Tejun Heo
• Re: pata_via with software raid1: "attempt to access beyond end of device"
  • From: Dâniel Fraga
• Re: pata_via with software raid1: "attempt to access beyond end of device"
  • From: Dâniel Fraga
• [git patches] IDE updates
  • From: Bartlomiej Zolnierkiewicz
• Re: pata_via with software raid1: "attempt to access beyond end of device"
  • From: Alan Cox
• Re: [Bugme-new] [Bug 8784] New: ata_piix cannot see ICHx IDE devices
  • From: Andrew Morton
• Re: [2/2] 2.6.22-git: known regressions
  • From: Michal Piotrowski
• Re: [2/2] 2.6.22-git: known regressions
  • From: Bartlomiej Zolnierkiewicz
• Re: [2/2] 2.6.22-git: known regressions
  • From: Michal Piotrowski
• Re: shutdown problem with 2.6.22 and debian 4.0
  • From: Jindrich Makovicka
• Re: [2/2] 2.6.22-git: known regressions
  • From: Mingming Caoc
• Re: [2/2] 2.6.22-git: known regressions
  • From: Satyam Sharma
• Re: [2/2] 2.6.22-git: known regressions
  • From: Greg KH
• Re: [2/2] 2.6.22-git: known regressions
  • From: Michal Piotrowski
• Re: libata [ata_piix] still no resume from S3 ?
  • From: Rúben Fonseca
• Re: libata [ata_piix] still no resume from S3 ?
  • From: Tejun Heo
• Re: libata [ata_piix] still no resume from S3 ?
  • From: Rúben Fonseca
• Re: [RFT][PATCH v7] sata_mv: convert to new EH
  • From: Pasi Kärkkäinen
• Re: Possible data corruption sata_sil24?
  • From: Tejun Heo
• Re: ALi SATA problem
  • From: Tejun Heo
• Re: ata bustage with CONFIG_PM=n
  • From: Tejun Heo
• ata bustage with CONFIG_PM=n
  • From: Andrew Morton
• The surprise and a lot of pleasures are waiting for you! RoRCNk
  • From: Mike
• Re: block/bsg.c
  • From: FUJITA Tomonori
• pata_via with software raid1: "attempt to access beyond end of device"
  • From: Dâniel Fraga
• linux 2.6.22 ide regression
  • From: Stephen Clark
• Re: [git patches 1/2] warnings: attack valid cases spotted by warnings
  • From: Greg KH
• Re: [PATCH] scc_pata.c: Workaround for errata A308 (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: 40-wire/80-wire detection
  • From: Bartlomiej Zolnierkiewicz
• Re: block/bsg.c
  • From: James Bottomley
• Re: [PATCH] siimage: fix ->set_pio_mode method to select PIO data transfer
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/6] icside: fix ->speedproc to return on unsupported modes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] cs5520: don't enable VDMA in ->speedproc
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] piix/slc90e66: fix PIO1 handling in ->speedproc method (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] it8213: PIO fixes (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] sc1200: remove redundant warning message from sc1200_tune_chipset()
  • From: Bartlomiej Zolnierkiewicz
• Re: block/bsg.c
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] scc_pata.c: Workaround for errata A308 (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: compile error if CONFIG_BLOCK not enabled related to linux/ide.h include
  • From: Bartlomiej Zolnierkiewicz
• Re: block/bsg.c
  • From: Bartlomiej Zolnierkiewicz
• Re: [git patches 1/2] warnings: attack valid cases spotted by warnings
  • From: Jeff Garzik
• Re: [git patches 1/2] warnings: attack valid cases spotted by warnings
  • From: Linus Torvalds
• Re: [git patches 1/2] warnings: attack valid cases spotted by warnings
  • From: Roland Dreier
• Re: Recommendations on user-space soft/hardreset
  • From: Yasha Okshtein
• Re: [RFT][PATCH v7] sata_mv: convert to new EH
  • From: dean gaudet
• Re: [git patches 1/2] warnings: attack valid cases spotted by warnings
  • From: Greg KH
• sata kernel problems, hang for 40 sec
  • From: Farkas Levente
• Re: compile error if CONFIG_BLOCK not enabled related to linux/ide.h include
  • From: Kumar Gala
• Re: Recommendations on user-space soft/hardreset
  • From: Alan Cox
• Re: Possible data corruption sata_sil24?
  • From: David Shaw
• Re: ALi SATA problem
  • From: Pavel Mateja
• Re: [git patches 2/2] warnings: use uninitialized_var()
  • From: Adrian Bunk
• Re: compile error if CONFIG_BLOCK not enabled related to linux/ide.h include
  • From: Bartlomiej Zolnierkiewicz
• Re: [RFT][PATCH v7] sata_mv: convert to new EH
  • From: Pasi Kärkkäinen
• Re: ALi SATA problem
  • From: Tejun Heo
• Re: ALi SATA problem
  • From: Pavel Mateja
• Re: ALi SATA problem
  • From: Tejun Heo
• Re: [PATCH] pata_platform: Fix NULL pointer dereference
  • From: Magnus Damm
• ALi SATA problem
  • From: Pavel Mateja
• Re: Possible data corruption sata_sil24?
  • From: Tejun Heo
• Re: libata [ata_piix] still no resume from S3 ?
  • From: Tejun Heo
• Re: Kernel bug in Fedora 7.
  • From: Thorsten Leemhuis
• Kernel bug in Fedora 7.
  • From: Serguei Miridonov
• Re: Recommendations on user-space soft/hardreset
  • From: Yasha Okshtein
• Re: [git patches 1/2] warnings: attack valid cases spotted by warnings
  • From: Linus Torvalds
• Re: Recommendations on user-space soft/hardreset
  • From: Tejun Heo
• compile error if CONFIG_BLOCK not enabled related to linux/ide.h include
  • From: Kumar Gala
• Re: Recommendations on user-space soft/hardreset
  • From: Yasha Okshtein
• Re: [git patches 1/2] warnings: attack valid cases spotted by warnings
  • From: Roland Dreier
• Re: Recommendations on user-space soft/hardreset
  • From: Tejun Heo
• Re: Recommendations on user-space soft/hardreset
  • From: Yasha Okshtein
• Re: [git patches 1/2] warnings: attack valid cases spotted by warnings
  • From: Linus Torvalds
• CONFIG_IDE_PROC_FS: /sys is not full replacement of /proc
  • From: Andrey Borzenkov
• Re: Recommendations on user-space soft/hardreset
  • From: Tejun Heo
• Re: [git patches 1/2] warnings: attack valid cases spotted by warnings
  • From: Jeff Garzik
• Re: [git patches 1/2] warnings: attack valid cases spotted by warnings
  • From: Roland Dreier
• Re: [PATCH] Fix SMART reporting on 2.6.22
  • From: Tejun Heo
• Re: [git patches 1/2] warnings: attack valid cases spotted by warnings
  • From: Linus Torvalds
• Re: [git patches 1/2] warnings: attack valid cases spotted by warnings
  • From: Roland Dreier
• Re: [git patches 1/2] warnings: attack valid cases spotted by warnings
  • From: Roland Dreier
• Re: Recommendations on user-space soft/hardreset
  • From: Yasha Okshtein
• Re: Recommendations on user-space soft/hardreset
  • From: Yasha Okshtein
• Re: Recommendations on user-space soft/hardreset
  • From: Alan Cox
• Re: Recommendations on user-space soft/hardreset
  • From: Yasha Okshtein
• Re: block/bsg.c
  • From: Bartlomiej Zolnierkiewicz
• Re: block/bsg.c
  • From: FUJITA Tomonori
• Re: [git patches 1/2] warnings: attack valid cases spotted by warnings
  • From: Linus Torvalds
• Re: [git patches 1/2] warnings: attack valid cases spotted by warnings
  • From: Andrew Morton