The only notable: GregKH wanted the pci_reenable_device() change
associated with ata_piix to go in before the release, to avoiding
release with an imperfect API.
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/ata/ata_piix.c | 74 +++++++++++++++++++++++++--------------------
drivers/ata/libata-core.c | 1 +
drivers/ata/libata-sff.c | 4 ++
drivers/ata/pata_cmd64x.c | 8 ++--
drivers/ata/pata_sis.c | 20 +++++-------
drivers/pci/pci-driver.c | 2 +-
drivers/pci/pci.c | 7 ++--
include/linux/pci.h | 2 +-
8 files changed, 64 insertions(+), 54 deletions(-)
Alan Cox (2):
pata_cmd64x: Correct the speed ranges
libata-sff; Unbreak non DMA capable controllers again
Bartlomiej Zolnierkiewicz (1):
pata_sis: fix MWDMA for <= UDMA66 chipsets and UDMA for UDMA33 chipsets
Tejun Heo (4):
pci: rename __pci_reenable_device() to pci_reenable_device()
ata_piix: implement piix_borken_suspend()
ata_piix: add Tecra M3 to broken suspend blacklist
libata: blacklist SAMSUNG HD401LJ / ZZ100-15 for NCQ
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index ad07086..a78832e 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -890,37 +890,46 @@ static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev)
}
#ifdef CONFIG_PM
-static struct dmi_system_id piix_broken_suspend_dmi_table[] = {
- {
- .ident = "TECRA M5",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
- DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M5"),
- },
- },
- {
- .ident = "Satellite U200",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U200"),
+static int piix_broken_suspend(void)
+{
+ static struct dmi_system_id sysids[] = {
+ {
+ .ident = "TECRA M5",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M5"),
+ },
},
- },
- {
- .ident = "Satellite U205",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U205"),
+ {
+ .ident = "Satellite U205",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U205"),
+ },
},
- },
- {
- .ident = "Portege M500",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
- DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE M500"),
+ {
+ .ident = "Portege M500",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE M500"),
+ },
},
- },
- { }
-};
+ { }
+ };
+ static const char *oemstrs[] = {
+ "Tecra M3,",
+ };
+ int i;
+
+ if (dmi_check_system(sysids))
+ return 1;
+
+ for (i = 0; i < ARRAY_SIZE(oemstrs); i++)
+ if (dmi_find_device(DMI_DEV_TYPE_OEM_STRING, oemstrs[i], NULL))
+ return 1;
+
+ return 0;
+}
static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
{
@@ -937,8 +946,7 @@ static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
* cycles and power trying to do something to the sleeping
* beauty.
*/
- if (dmi_check_system(piix_broken_suspend_dmi_table) &&
- mesg.event == PM_EVENT_SUSPEND) {
+ if (piix_broken_suspend() && mesg.event == PM_EVENT_SUSPEND) {
pci_save_state(pdev);
/* mark its power state as "unknown", since we don't
@@ -973,10 +981,10 @@ static int piix_pci_device_resume(struct pci_dev *pdev)
pci_restore_state(pdev);
/* PCI device wasn't disabled during suspend. Use
- * __pci_reenable_device() to avoid affecting the
- * enable count.
+ * pci_reenable_device() to avoid affecting the enable
+ * count.
*/
- rc = __pci_reenable_device(pdev);
+ rc = pci_reenable_device(pdev);
if (rc)
dev_printk(KERN_ERR, &pdev->dev, "failed to enable "
"device after resume (%d)\n", rc);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 6001aae..60e78be 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3788,6 +3788,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, },
{ "FUJITSU MHV2080BH", "00840028", ATA_HORKAGE_NONCQ, },
{ "ST9160821AS", "3.CLF", ATA_HORKAGE_NONCQ, },
+ { "SAMSUNG HD401LJ", "ZZ100-15", ATA_HORKAGE_NONCQ, },
/* Devices with NCQ limits */
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 6c289c7..1cce219 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -573,6 +573,10 @@ int ata_pci_init_bmdma(struct ata_host *host)
struct pci_dev *pdev = to_pci_dev(gdev);
int i, rc;
+ /* No BAR4 allocation: No DMA */
+ if (pci_resource_start(pdev, 4) == 0)
+ return 0;
+
/* TODO: If we get no DMA mask we should fall back to PIO */
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index dc443e7..e34b632 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -31,7 +31,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_cmd64x"
-#define DRV_VERSION "0.2.3"
+#define DRV_VERSION "0.2.4"
/*
* CMD64x specific registers definition.
@@ -397,7 +397,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
- .udma_mask = ATA_UDMA1,
+ .udma_mask = ATA_UDMA2,
.port_ops = &cmd64x_port_ops
},
{ /* CMD 646 rev 1 */
@@ -412,7 +412,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
- .udma_mask = ATA_UDMA2,
+ .udma_mask = ATA_UDMA4,
.port_ops = &cmd648_port_ops
},
{ /* CMD 649 */
@@ -420,7 +420,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
- .udma_mask = ATA_UDMA3,
+ .udma_mask = ATA_UDMA5,
.port_ops = &cmd648_port_ops
}
};
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 9a829a7..66bd0e8 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -2,6 +2,7 @@
* pata_sis.c - SiS ATA driver
*
* (C) 2005 Red Hat <alan@xxxxxxxxxx>
+ * (C) 2007 Bartlomiej Zolnierkiewicz
*
* Based upon linux/drivers/ide/pci/sis5513.c
* Copyright (C) 1999-2000 Andre Hedrick <andre@xxxxxxxxxxxxx>
@@ -35,7 +36,7 @@
#include "sis.h"
#define DRV_NAME "pata_sis"
-#define DRV_VERSION "0.5.1"
+#define DRV_VERSION "0.5.2"
struct sis_chipset {
u16 device; /* PCI host ID */
@@ -237,7 +238,7 @@ static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev)
}
/**
- * sis_100_set_pioode - Initialize host controller PATA PIO timings
+ * sis_100_set_piomode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
* @adev: Device we are configuring for.
*
@@ -262,7 +263,7 @@ static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev)
}
/**
- * sis_133_set_pioode - Initialize host controller PATA PIO timings
+ * sis_133_set_piomode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
* @adev: Device we are configuring for.
*
@@ -334,7 +335,7 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev)
int drive_pci = sis_old_port_base(adev);
u16 timing;
- const u16 mwdma_bits[] = { 0x707, 0x202, 0x202 };
+ const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
const u16 udma_bits[] = { 0xE000, 0xC000, 0xA000 };
pci_read_config_word(pdev, drive_pci, &timing);
@@ -342,15 +343,15 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev)
if (adev->dma_mode < XFER_UDMA_0) {
/* bits 3-0 hold recovery timing bits 8-10 active timing and
the higer bits are dependant on the device */
- timing &= ~ 0x870F;
+ timing &= ~0x870F;
timing |= mwdma_bits[speed];
- pci_write_config_word(pdev, drive_pci, timing);
} else {
/* Bit 15 is UDMA on/off, bit 13-14 are cycle time */
speed = adev->dma_mode - XFER_UDMA_0;
timing &= ~0x6000;
timing |= udma_bits[speed];
}
+ pci_write_config_word(pdev, drive_pci, timing);
}
/**
@@ -373,7 +374,7 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
int drive_pci = sis_old_port_base(adev);
u16 timing;
- const u16 mwdma_bits[] = { 0x707, 0x202, 0x202 };
+ const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000};
pci_read_config_word(pdev, drive_pci, &timing);
@@ -432,8 +433,7 @@ static void sis_100_set_dmamode (struct ata_port *ap, struct ata_device *adev)
* @adev: Device to program
*
* Set UDMA/MWDMA mode for device, in host controller PCI config space.
- * Handles early SiS 961 bridges. Supports MWDMA as well unlike
- * the old ide/pci driver.
+ * Handles early SiS 961 bridges.
*
* LOCKING:
* None (inherited from caller).
@@ -467,8 +467,6 @@ static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *a
* @adev: Device to program
*
* Set UDMA/MWDMA mode for device, in host controller PCI config space.
- * Handles early SiS 961 bridges. Supports MWDMA as well unlike
- * the old ide/pci driver.
*
* LOCKING:
* None (inherited from caller).
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 8e58ea3..004bc24 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -310,7 +310,7 @@ static int pci_default_resume(struct pci_dev *pci_dev)
/* restore the PCI config space */
pci_restore_state(pci_dev);
/* if the device was enabled before suspend, reenable */
- retval = __pci_reenable_device(pci_dev);
+ retval = pci_reenable_device(pci_dev);
/* if the device was busmaster before the suspend, make it busmaster again */
if (pci_dev->is_busmaster)
pci_set_master(pci_dev);
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 1ee9cd9..37c00f6 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -695,14 +695,13 @@ static int do_pci_enable_device(struct pci_dev *dev, int bars)
}
/**
- * __pci_reenable_device - Resume abandoned device
+ * pci_reenable_device - Resume abandoned device
* @dev: PCI device to be resumed
*
* Note this function is a backend of pci_default_resume and is not supposed
* to be called by normal code, write proper resume handler and use it instead.
*/
-int
-__pci_reenable_device(struct pci_dev *dev)
+int pci_reenable_device(struct pci_dev *dev)
{
if (atomic_read(&dev->enable_cnt))
return do_pci_enable_device(dev, (1 << PCI_NUM_RESOURCES) - 1);
@@ -1604,7 +1603,7 @@ early_param("pci", pci_setup);
device_initcall(pci_init);
EXPORT_SYMBOL_GPL(pci_restore_bars);
-EXPORT_SYMBOL(__pci_reenable_device);
+EXPORT_SYMBOL(pci_reenable_device);
EXPORT_SYMBOL(pci_enable_device_bars);
EXPORT_SYMBOL(pci_enable_device);
EXPORT_SYMBOL(pcim_enable_device);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index d8f8a3a..e7d8d4e 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -534,7 +534,7 @@ static inline int pci_write_config_dword(struct pci_dev *dev, int where, u32 val
int __must_check pci_enable_device(struct pci_dev *dev);
int __must_check pci_enable_device_bars(struct pci_dev *dev, int mask);
-int __must_check __pci_reenable_device(struct pci_dev *);
+int __must_check pci_reenable_device(struct pci_dev *);
int __must_check pcim_enable_device(struct pci_dev *pdev);
void pcim_pin_device(struct pci_dev *pdev);
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
