Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/ata/ata_piix.c | 113 ++++++++++++++++++++++++++++++++++++++++++++-
drivers/ata/pata_ali.c | 2 +-
drivers/ata/pata_hpt37x.c | 14 +++---
drivers/pci/pci.c | 1 +
drivers/pci/pci.h | 1 -
include/linux/libata.h | 2 +
include/linux/pci.h | 1 +
7 files changed, 123 insertions(+), 11 deletions(-)
Alan Cox (2):
pata_ali: Correct HP detect
pata_hpt37x: Fix 2.6.22 clock PLL regression
Tejun Heo (2):
PCI: export __pci_reenable_device()
ata_piix: fix suspend/resume for some TOSHIBA laptops
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index d9fa329..ad07086 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -91,6 +91,7 @@
#include <linux/device.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
+#include <linux/dmi.h>
#define DRV_NAME "ata_piix"
#define DRV_VERSION "2.11"
@@ -140,6 +141,9 @@ enum {
RV = -3, /* reserved */
PIIX_AHCI_DEVICE = 6,
+
+ /* host->flags bits */
+ PIIX_HOST_BROKEN_SUSPEND = (1 << 24),
};
struct piix_map_db {
@@ -159,6 +163,10 @@ static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev);
static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev);
static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev);
static int ich_pata_cable_detect(struct ata_port *ap);
+#ifdef CONFIG_PM
+static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
+static int piix_pci_device_resume(struct pci_dev *pdev);
+#endif
static unsigned int in_module_init = 1;
@@ -255,8 +263,8 @@ static struct pci_driver piix_pci_driver = {
.probe = piix_init_one,
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
- .suspend = ata_pci_device_suspend,
- .resume = ata_pci_device_resume,
+ .suspend = piix_pci_device_suspend,
+ .resume = piix_pci_device_resume,
#endif
};
@@ -881,6 +889,107 @@ static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev)
do_pata_set_dmamode(ap, adev, 1);
}
+#ifdef CONFIG_PM
+static struct dmi_system_id piix_broken_suspend_dmi_table[] = {
+ {
+ .ident = "TECRA M5",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M5"),
+ },
+ },
+ {
+ .ident = "Satellite U200",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U200"),
+ },
+ },
+ {
+ .ident = "Satellite U205",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U205"),
+ },
+ },
+ {
+ .ident = "Portege M500",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE M500"),
+ },
+ },
+ { }
+};
+
+static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ unsigned long flags;
+ int rc = 0;
+
+ rc = ata_host_suspend(host, mesg);
+ if (rc)
+ return rc;
+
+ /* Some braindamaged ACPI suspend implementations expect the
+ * controller to be awake on entry; otherwise, it burns cpu
+ * cycles and power trying to do something to the sleeping
+ * beauty.
+ */
+ if (dmi_check_system(piix_broken_suspend_dmi_table) &&
+ mesg.event == PM_EVENT_SUSPEND) {
+ pci_save_state(pdev);
+
+ /* mark its power state as "unknown", since we don't
+ * know if e.g. the BIOS will change its device state
+ * when we suspend.
+ */
+ if (pdev->current_state == PCI_D0)
+ pdev->current_state = PCI_UNKNOWN;
+
+ /* tell resume that it's waking up from broken suspend */
+ spin_lock_irqsave(&host->lock, flags);
+ host->flags |= PIIX_HOST_BROKEN_SUSPEND;
+ spin_unlock_irqrestore(&host->lock, flags);
+ } else
+ ata_pci_device_do_suspend(pdev, mesg);
+
+ return 0;
+}
+
+static int piix_pci_device_resume(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ unsigned long flags;
+ int rc;
+
+ if (host->flags & PIIX_HOST_BROKEN_SUSPEND) {
+ spin_lock_irqsave(&host->lock, flags);
+ host->flags &= ~PIIX_HOST_BROKEN_SUSPEND;
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+
+ /* PCI device wasn't disabled during suspend. Use
+ * __pci_reenable_device() to avoid affecting the
+ * enable count.
+ */
+ rc = __pci_reenable_device(pdev);
+ if (rc)
+ dev_printk(KERN_ERR, &pdev->dev, "failed to enable "
+ "device after resume (%d)\n", rc);
+ } else
+ rc = ata_pci_device_do_resume(pdev);
+
+ if (rc == 0)
+ ata_host_resume(host);
+
+ return rc;
+}
+#endif
+
#define AHCI_PCI_BAR 5
#define AHCI_GLOBAL_CTL 0x04
#define AHCI_ENABLE (1 << 31)
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 0104367..e8a28e9 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -45,7 +45,7 @@ static struct dmi_system_id cable_dmi_table[] = {
.ident = "HP Pavilion N5430",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_BOARD_NAME, "OmniBook N32N-736"),
+ DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"),
},
},
{ }
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index b0af65a..84d9c55 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -26,7 +26,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt37x"
-#define DRV_VERSION "0.6.6"
+#define DRV_VERSION "0.6.7"
struct hpt_clock {
u8 xfer_speed;
@@ -1103,17 +1103,17 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
/* Select the DPLL clock. */
pci_write_config_byte(dev, 0x5b, 0x21);
- pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
+ pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low | 0x100);
for(adjust = 0; adjust < 8; adjust++) {
if (hpt37x_calibrate_dpll(dev))
break;
/* See if it'll settle at a fractionally different clock */
- if ((adjust & 3) == 3) {
- f_low --;
- f_high ++;
- }
- pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
+ if (adjust & 1)
+ f_low -= adjust >> 1;
+ else
+ f_high += adjust >> 1;
+ pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low | 0x100);
}
if (adjust == 8) {
printk(KERN_WARNING "hpt37x: DPLL did not stabilize.\n");
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 03fd59e..c954853 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1604,6 +1604,7 @@ early_param("pci", pci_setup);
device_initcall(pci_init);
EXPORT_SYMBOL_GPL(pci_restore_bars);
+EXPORT_SYMBOL(__pci_reenable_device);
EXPORT_SYMBOL(pci_enable_device_bars);
EXPORT_SYMBOL(pci_enable_device);
EXPORT_SYMBOL(pcim_enable_device);
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 3fec13d..7b696cd 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -1,6 +1,5 @@
/* Functions internal to the PCI core code */
-extern int __must_check __pci_reenable_device(struct pci_dev *);
extern int pci_uevent(struct device *dev, char **envp, int num_envp,
char *buffer, int buffer_size);
extern int pci_create_sysfs_dev_files(struct pci_dev *pdev);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 9aa6c10..41978a5 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -216,6 +216,8 @@ enum {
ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host only */
ATA_HOST_STARTED = (1 << 1), /* Host started */
+ /* bits 24:31 of host->flags are reserved for LLD specific flags */
+
/* various lengths of time */
ATA_TMOUT_BOOT = 30 * HZ, /* heuristic */
ATA_TMOUT_BOOT_QUICK = 7 * HZ, /* heuristic */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 5e84f2e..d8f8a3a 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -534,6 +534,7 @@ static inline int pci_write_config_dword(struct pci_dev *dev, int where, u32 val
int __must_check pci_enable_device(struct pci_dev *dev);
int __must_check pci_enable_device_bars(struct pci_dev *dev, int mask);
+int __must_check __pci_reenable_device(struct pci_dev *);
int __must_check pcim_enable_device(struct pci_dev *pdev);
void pcim_pin_device(struct pci_dev *pdev);
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
