Linux IDE Archive

• Thread Index

• [Bug 10216] kernel from different versions hangs with some CD/DVD drives
  • From: bugme-daemon
• [Bug 10216] kernel from different versions hangs with some CD/DVD drives
  • From: bugme-daemon
• Re: request to revert libata-convert-to-block-tagging patches
  • From: Jeff Garzik
• Re: Problem w/ hotplug on sata_sil24 w/ PMP (sil3726)
  • From: Lars Michael Jogback
• Re: request to revert libata-convert-to-block-tagging patches
  • From: Jens Axboe
• Re: [PATCHSET #upstream] libata: improve timeout handling for EH commands
  • From: saeed bishara
• Re: request to revert libata-convert-to-block-tagging patches
  • From: Linus Torvalds
• Re: request to revert libata-convert-to-block-tagging patches
  • From: Linus Torvalds
• Re: Fwd: [PATCH #upstream-fixes 1/4] libata: fix device iteration bugs
  • From: Mark Lord
• Re: request to revert libata-convert-to-block-tagging patches
  • From: Tejun Heo
• Re: request to revert libata-convert-to-block-tagging patches
  • From: Jens Axboe
• Re: request to revert libata-convert-to-block-tagging patches
  • From: Jens Axboe
• Re: Bug 11581
  • From: Santiago Vila
• Re: Odd behaviour of device in response to idleimmediate with unload
  • From: Elias Oltmanns
• Re: Odd behaviour of device in response to idleimmediate with unload
  • From: Evgeni Golov
• Re: Fwd: [PATCH #upstream-fixes 1/4] libata: fix device iteration bugs
  • From: Tejun Heo
• Re: Fwd: [PATCH #upstream-fixes 1/4] libata: fix device iteration bugs
  • From: Michael Guntsche
• Re: [libata/sata_sil] Error on startup
  • From: Alex Gonzalez
• Re: Odd behaviour of device in response to idleimmediate with unload
  • From: Tejun Heo
• Re: [git patches] libata hibernation fixes
  • From: Tejun Heo
• Re: Fwd: [PATCH #upstream-fixes 1/4] libata: fix device iteration bugs
  • From: Tejun Heo
• Re: Problem w/ hotplug on sata_sil24 w/ PMP (sil3726)
  • From: Tejun Heo
• Re: Bug 11581
  • From: Borislav Petkov
• [PATCH] libata: revert convert-to-block-tagging patches
  • From: Tejun Heo
• Re: request to revert libata-convert-to-block-tagging patches
  • From: Tejun Heo
• request to revert libata-convert-to-block-tagging patches
  • From: Tejun Heo
• [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
  • From: bugme-daemon
• [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
  • From: bugme-daemon
• [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
  • From: bugme-daemon
• [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
  • From: bugme-daemon
• [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
  • From: bugme-daemon
• [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
  • From: bugme-daemon
• [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
  • From: bugme-daemon
• [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
  • From: bugme-daemon
• [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
  • From: bugme-daemon
• [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
  • From: bugme-daemon
• [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
  • From: bugme-daemon
• Re: [PATCH] pata_pcmcia: another memory card support
  • From: Dominik Brodowski
• [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
  • From: bugme-daemon
• [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
  • From: bugme-daemon
• Re: [RFC PATCH] falconide: remove needless ST-DMA locking
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 11/11] ide: push local_irq_{save,restore}() to do_identify()
  • From: Sergei Shtylyov
• Re: [PATCH 03/11] ide: remove dead code from drive_is_ready()
  • From: Sergei Shtylyov
• Re: [PATCH 07/11] ide: use ATA_DMA_* defines in ide-dma-sff.c
  • From: Sergei Shtylyov
• [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
  • From: bugme-daemon
• [PATCH 11/11] ide: push local_irq_{save,restore}() to do_identify()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/11] ide: remove superfluous local_irq_{save,restore}() from ide_dump_status()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 09/11] ide: move legacy ISA/VLB ports handling to ide-legacy.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 08/11] ide: move Power Management support to ide-pm.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 07/11] ide: use ATA_DMA_* defines in ide-dma-sff.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 06/11] ide: checkpatch.pl fixes for ide-lib.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 05/11] ide: remove inline tags from ide-probe.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 04/11] ide: remove redundant code from ide_end_drive_cmd()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 03/11] ide: remove dead code from drive_is_ready()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 02/11] ide: fix build for DEBUG_PM
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 01/11] ide: respect current DMA setting during resume
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide-cd: remove dead dsc_overlap setting
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 6/6] ide: rework handling of serialized ports
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/6] rz1000: apply chipset quirks early
  • From: Bartlomiej Zolnierkiewicz
• [Bug 11732] Oops while mounting a DVD-ROM
  • From: bugme-daemon
• [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
  • From: bugme-daemon
• [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
  • From: bugme-daemon
• [Bug 10216] kernel from different versions hangs with some CD/DVD drives
  • From: bugme-daemon
• 2.6.28-rc3 libata: still "failed to IDENTIFY" on bootup
  • From: Andreas Mohr
• Re: 2.6.28-rc3: OOPS libata-eh.c:3259
  • From: Tejun Heo
• 2.6.28-rc3: OOPS libata-eh.c:3259
  • From: Parag Warudkar
• [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
  • From: bugme-daemon
• [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
  • From: bugme-daemon
• Re: [PATCH] pata_sch slave devices
  • From: Jeff Garzik
• Re: [PATCH] pata_sch slave devices
  • From: Alan Cox
• Re: [PATCH] ata: ata_id_is_ssd() bugfix
  • From: KueiHuan Chen
• Re: Odd behaviour of device in response to idleimmediate with unload
  • From: Evgeni Golov
• Re: Odd behaviour of device in response to idleimmediate with unload
  • From: Tejun Heo
• [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
  • From: bugme-daemon
• Re: [PATCH] pata_pcmcia: another memory card support
  • From: Komuro
• Re: [PATCH #hibern_regress] libata: add missing dummy dmi_first_match()
  • From: Rafael J. Wysocki
• [PATCH] pata_sch slave devices
  • From: Mark Salter
• Re: Odd behaviour of device in response to idleimmediate with unload
  • From: Elias Oltmanns
• Re: [PATCH] pata_pcmcia: another memory card support
  • From: Marc Pignat
• Re: [PATCH] pata_pcmcia: another memory card support
  • From: Komuro
• Re: Odd behaviour of device in response to idleimmediate with unload
  • From: Elias Oltmanns
• Re: Odd behaviour of device in response to idleimmediate with unload
  • From: Evgeni Golov
• [PATCH] pata_pcmcia: another memory card support
  • From: Marc Pignat
• Re: Odd behaviour of device in response to idleimmediate with unload
  • From: Evgeni Golov
• Re: Odd behaviour of device in response to idleimmediate with unload
  • From: Elias Oltmanns
• [PATCH #hibern_regress] libata: add missing dummy dmi_first_match()
  • From: Tejun Heo
• Re: [git patches] libata hibernation fixes
  • From: Robert Hancock
• Re: Odd behaviour of device in response to idleimmediate with unload
  • From: Tejun Heo
• Re: Odd behaviour of device in response to idleimmediate with unload
  • From: Elias Oltmanns
• Re: [PATCH] pata-rb532-cf: read and write data in 4-byte blocks
  • From: Phil Sutter
• Re: [PATCH] pata-rb532-cf: read and write data in 4-byte blocks
  • From: Sergei Shtylyov
• Re: [git patches] libata hibernation fixes
  • From: Tejun Heo
• Re: Odd behaviour of device in response to idleimmediate with unload
  • From: Tejun Heo
• Re: [git patches] libata hibernation fixes
  • From: Elias Oltmanns
• Re: Subject: [PATCH] block: fix __blkdev_get() for removable devices
  • From: Jens Axboe
• Re: Subject: [PATCH] block: fix __blkdev_get() for removable devices
  • From: Borislav Petkov
• Re: trouble with seagate 1.5TB - 2.6.27.4
  • From: kyle
• Re: trouble with seagate 1.5TB - 2.6.27.4
  • From: Mark Lord
• Re: trouble with seagate 1.5TB - 2.6.27.4
  • From: James Andrewartha
• Re: [git patches] libata hibernation fixes
  • From: Tejun Heo
• Re: hdparm-9.2 now available: w/ DCO and firmware support
  • From: Mark Lord
• Re: [git patches] libata hibernation fixes
  • From: Tejun Heo
• Re: [git patches] libata hibernation fixes
  • From: Robert Hancock
• Re: [git patches] libata hibernation fixes
  • From: Tejun Heo
• Re: [git patches] libata hibernation fixes
  • From: Tejun Heo
• Re: [git patches] libata hibernation fixes
  • From: Mark Lord
• Re: [git patches] libata hibernation fixes
  • From: Elias Oltmanns
• Re: [git patches] libata hibernation fixes
  • From: Robert Hancock
• Re: [git patches] libata hibernation fixes
  • From: Robert Hancock
• Re: hdparm-9.2 now available: w/ DCO and firmware support
  • From: Greg Freemyer
• Re: [git patches] libata hibernation fixes
  • From: Linus Torvalds
• Re: hdparm-9.2 now available: w/ DCO and firmware support
  • From: Greg Freemyer
• Re: [git patches] libata hibernation fixes
  • From: Rafael J. Wysocki
• Re: [git patches] libata hibernation fixes
  • From: Pavel Machek
• Re: Odd behaviour of device in response to idleimmediate with unload
  • From: Mark Lord
• Re: hdparm-9.2 now available: w/ DCO and firmware support
  • From: Mark Lord
• Re: [PATCH 3/6] rz1000: apply chipset quirks early
  • From: Sergei Shtylyov
• Re: Odd behaviour of device in response to idleimmediate with unload
  • From: Evgeni Golov
• Re: [PATCH 6/6] ide: rework handling of serialized ports
  • From: Sergei Shtylyov
• Re: [PATCH 6/6] ide: rework handling of serialized ports
  • From: Sergei Shtylyov
• 2.6.28-rc3: WARN_ON(ap->nr_active_links) in ata_eh_finish() with pata_ali DMA CD-ROM
  • From: Andrey Borzenkov
• Re: hdparm-9.2 now available: w/ DCO and firmware support
  • From: Greg Freemyer
• Re: Odd behaviour of device in response to idleimmediate with unload
  • From: Mark Lord
• Re: hdparm-9.2 now available: w/ DCO and firmware support
  • From: Mark Lord
• hdparm-9.3 now available: --idle-immediate & --idle-unload flags
  • From: Mark Lord
• Re: hdparm-9.2 now available: w/ DCO and firmware support
  • From: Greg Freemyer
• Re: Odd behaviour of device in response to idleimmediate with unload
  • From: Mark Lord
• Re: [PATCH 4/6] trm290: add IDE_HFLAG_TRM290 host flag
  • From: Sergei Shtylyov
• Re: [PATCH 3/6] rz1000: apply chipset quirks early
  • From: Sergei Shtylyov
• Re: Odd behaviour of device in response to idleimmediate with unload
  • From: Mark Lord
• Re: WD3200BEVT frequent head unload
  • From: Mark Lord
• Re: Odd behaviour of device in response to idleimmediate with unload
  • From: Mark Lord
• Re: [git patches] libata hibernation fixes
  • From: Rafael J. Wysocki
• Re: [git patches] libata hibernation fixes
  • From: Mark Lord
• Re: [git patches] libata hibernation fixes
  • From: Rafael J. Wysocki
• Re: [git patches] libata hibernation fixes
  • From: Linus Torvalds
• Re: Odd behaviour of device in response to idleimmediate with unload
  • From: Evgeni Golov
• Re: [PATCH] pata-rb532-cf: read and write data in 4-byte blocks
  • From: Phil Sutter
• Re: sata error on ICH8M (Dell Vostro 1710 laptop)
  • From: Tim Connors
• sata error on ICH8M
  • From: Tim Connors
• Re: Odd behaviour of device in response to idleimmediate with unload
  • From: Tejun Heo
• Odd behaviour of device in response to idleimmediate with unload
  • From: Elias Oltmanns
• [PATCH #upstream-fixes UPDATED] libata: fix last_reset timestamp handling
  • From: Tejun Heo
• [PATCH #upstream-fixes] libata: fix last_reset timestamp handling
  • From: Tejun Heo
• [git patches] libata hibernation fixes
  • From: Jeff Garzik
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH 1/8] Hibernation: Introduce system_entering_hibernation
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] libata: mask off DET when restoring SControl for detach
  • From: Jeff Garzik
• Re: [PATCH 8/8] libata: implement ATA_HORKAGE_ATAPI_MOD16_DMA and apply it
  • From: Jeff Garzik
• Re: [PATCH 7/8] libata: Fix a potential race condition in ata_scsi_park_show()
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes UPDATED] sata_nv: fix generic, nf2/3 detection regression
  • From: Jeff Garzik
• Re: [PATCH] sata_via: restore vt*_prepare_host error handling
  • From: Jeff Garzik
• Re: [PATCH 2.6.28-rc2] sata_promise: add ATA engine reset to reset ops
  • From: Jeff Garzik
• Re: [PATCH] pata-rb532-cf: read and write data in 4-byte blocks
  • From: Jeff Garzik
• Re: [PATCHSET #upstream] libata: separate out SFF and BMDMA
  • From: Tejun Heo
• Re: [PATCHSET #upstream] libata: separate out SFF and BMDMA
  • From: Jeff Garzik
• Subject: [PATCH] block: fix __blkdev_get() for removable devices
  • From: Tejun Heo
• WD3200BEVT frequent head unload
  • From: Aleksei Kazantsev
• [PATCH 6/6] ide: rework handling of serialized ports
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/6] cy82c693: remove superfluous ide_cy82c693 chipset type
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/6] trm290: add IDE_HFLAG_TRM290 host flag
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/6] rz1000: apply chipset quirks early
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/6] ide: always set nIEN on idle devices
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/6] ide: fix ->quirk_list checking in ide_do_request()
  • From: Bartlomiej Zolnierkiewicz
• hdparm-9.2 now available: w/ DCO and firmware support
  • From: Mark Lord
• [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
  • From: bugme-daemon
• [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
  • From: bugme-daemon
• Re: [RFC PATCH] ide-floppy partitions
  • From: Borislav Petkov
• Re: [RFC PATCH] ide-floppy partitions
  • From: Tejun Heo
• Re: [PATCHSET #upstream] libata: separate out SFF and BMDMA
  • From: Tejun Heo
• Re: [PATCH] pata-rb532-cf: read and write data in 4-byte blocks
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] pata-rb532-cf: read and write data in 4-byte blocks
  • From: Phil Sutter
• [Bug 10370] mount failed on ubuntu-8.04_ppc
  • From: bugme-daemon
• [Bug 11540] hda lost irq on boot
  • From: bugme-daemon
• [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
  • From: bugme-daemon
• [Bug 11943] Boot fails at scsi0:MESH with hde: lost interrupt, AEC6260
  • From: bugme-daemon
• [PATCH #upstream 3/3] libata: perform port detach in EH
  • From: Tejun Heo
• [PATCH #upstream 2/3] libata: when restoring SControl during detach do the PMP links first
  • From: Tejun Heo
• [PATCH #upstream 1/3] libata: beef up iterators
  • From: Tejun Heo
• [PATCH #upstream-fixes] libata: mask off DET when restoring SControl for detach
  • From: Tejun Heo
• [PATCH 8/8] libata: implement ATA_HORKAGE_ATAPI_MOD16_DMA and apply it
  • From: Tejun Heo
• [PATCH 7/8] libata: Fix a potential race condition in ata_scsi_park_show()
  • From: Tejun Heo
• [PATCH 5/8] SATA Sil: Blacklist system that spins off disks during ACPI power off
  • From: Tejun Heo
• [PATCH 6/8] SATA PIIX: Blacklist system that spins off disks during ACPI power off
  • From: Tejun Heo
• [PATCH 3/8] SATA: Blacklisting of systems that spin off disks during ACPI power off (rev. 2)
  • From: Tejun Heo
• [PATCH 4/8] SATA AHCI: Blacklist system that spins off disks during ACPI power off
  • From: Tejun Heo
• [PATCH 1/8] Hibernation: Introduce system_entering_hibernation
  • From: Tejun Heo
• [PATCH 2/8] DMI: Introduce dmi_first_match to make the interface more flexible
  • From: Tejun Heo
• [PATCHSET #upstream-fixes] patches which fell off the crack during maintainership handover
  • From: Tejun Heo
• Re: libata: Fix a potential race condition in ata_scsi_park_show()
  • From: Tejun Heo
• [Frequent Head Unloads] ASUS A6B00U Notebook affected
  • From: Michał Gołębiowski
• [PATCH #upstream-fixes UPDATED] sata_nv: fix generic, nf2/3 detection regression
  • From: Tejun Heo
• [PATCH #upstream-fixes] sata_nv: fix generic, nf2/3 detection regression
  • From: Tejun Heo
• Re: [PATCH] sata_via: restore vt*_prepare_host error handling
  • From: Tejun Heo
• Re: [git patches] libata fixes
  • From: Mark Lord
• Re: [PATCH] fix pata-rb532-cf
  • From: Phil Sutter
• Re: [PATCH] fix pata-rb532-cf
  • From: Sergei Shtylyov
• Re: [PATCH] read and write data in 4-byte blocks
  • From: Sergei Shtylyov
• [PATCH] sata_via: restore vt*_prepare_host error handling
  • From: Marcin Slusarz
• [git pull] IDE fixes #1
  • From: Bartlomiej Zolnierkiewicz
• Re: [git patches] libata fixes
  • From: Greg Freemyer
• Port multiplier resets
  • From: Yan Seiner
• Re: [git patches] libata fixes
  • From: Jeff Garzik
• what does it meam: stex invalid tag ?
  • From: Raz
• Re: [RFC PATCH] ide-floppy partitions
  • From: Borislav Petkov
• [PATCH] read and write data in 4-byte blocks
  • From: Phil Sutter
• [PATCH] read and write data in 4-byte blocks
  • From: Phil Sutter
• [PATCH] fix pata-rb532-cf
  • From: Phil Sutter
• Re: [PATCH] fix pata-rb532-cf
  • From: Sergei Shtylyov
• Re: [PATCH] fix pata-rb532-cf
  • From: Phil Sutter
• Re: [PATCH] fix pata-rb532-cf
  • From: Sergei Shtylyov
• Re: [PATCH] fix pata-rb532-cf
  • From: Sergei Shtylyov
• [PATCH] fix pata-rb532-cf
  • From: Phil Sutter
• Re: [PATCH] fix pata-rb532-cf
  • From: Phil Sutter
• Re: [PATCH 2/2] cmd64x: set IDE_HFLAG_SERIALIZE explictly for CMD646
  • From: Mark Lord
• Kernel 2.6.27: Problems with DVD drive/nVidia MCP51
  • From: Elad Lahav
• Re: [git patches] libata fixes
  • From: Greg Freemyer
• Re: [PATCH] fix pata-rb532-cf
  • From: Sergei Shtylyov
• Re: [PATCH] fix pata-rb532-cf
  • From: Sergei Shtylyov
• Re: [PATCH 0/1] sata_sil: Option to use IO space to access TF registers.
  • From: Alan Cox
• [PATCH 2.6.28-rc2] sata_promise: add ATA engine reset to reset ops
  • From: Mikael Pettersson
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH 5/7] ATA: remove excess kernel-doc notation
  • From: Jeff Garzik
• Re: [PATCH 1/2 #upstream-fixes] sata_via: fix support for 5287
  • From: Jeff Garzik
• Re: libata bridge limits
  • From: Jeff Garzik
• Re: libata: Fix a potential race condition in ata_scsi_park_show()
  • From: Jeff Garzik
• trouble with seagate 1.5TB - 2.6.27.4
  • From: kyle
• Re: libata: Fix a potential race condition in ata_scsi_park_show()
  • From: Tejun Heo
• Re: [PATCH 0/1] sata_sil: Option to use IO space to access TF registers.
  • From: Tejun Heo
• Re: [PATCH] fix pata-rb532-cf
  • From: Phil Sutter
• reenable DMA
  • From: kenneth johansson
• Re: [PATCH] fix pata-rb532-cf
  • From: Sergei Shtylyov
• Re: [PATCH] fix pata-rb532-cf
  • From: Florian Fainelli
• Re: [PATCH 0/1] sata_sil: Option to use IO space to access TF registers.
  • From: Chris Dearman
• [PATCH] fix pata-rb532-cf
  • From: Phil Sutter
• Re: libata: Fix a potential race condition in ata_scsi_park_show()
  • From: Elias Oltmanns
• Re: Linux 2.6.28-rc2 lost IDE disk on old laptop
  • From: Borislav Petkov
• Re: [PATCH] block: add timer on blkdev_dequeue_request() not elv_next_request()
  • From: Jens Axboe
• Re: [PATCH] block: add timer on blkdev_dequeue_request() not elv_next_request()
  • From: Tejun Heo
• Re: [PATCH] block: add timer on blkdev_dequeue_request() not elv_next_request()
  • From: Tejun Heo
• Re: [PATCH] block: add timer on blkdev_dequeue_request() not elv_next_request()
  • From: Mike Anderson
• Re: [PATCH] block: add timer on blkdev_dequeue_request() not elv_next_request()
  • From: Jens Axboe
• Re: [PATCH] block: add timer on blkdev_dequeue_request() not elv_next_request()
  • From: Tejun Heo
• Re: [PATCH] block: add timer on blkdev_dequeue_request() not elv_next_request()
  • From: Jens Axboe
• [PATCH 5/7] ATA: remove excess kernel-doc notation
  • From: Randy Dunlap
• [PATCH] block: add timer on blkdev_dequeue_request() not elv_next_request()
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes 2/4] libata: beef up iterators
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes 2/4] libata: beef up iterators
  • From: Mark Lord
• Re: Timeout regression introduced by 242f9dcb8ba6f68fcd217a119a7648a4f69290e9
  • From: Tejun Heo
• Re: [PATCH 2/2] cmd64x: set IDE_HFLAG_SERIALIZE explictly for CMD646
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/2] cmd64x: set IDE_HFLAG_SERIALIZE explictly for CMD646
  • From: Sergei Shtylyov
• Re: [PATCH 2/2] cmd64x: set IDE_HFLAG_SERIALIZE explictly for CMD646
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/2] cmd64x: set IDE_HFLAG_SERIALIZE explictly for CMD646
  • From: Sergei Shtylyov
• Re: [PATCH 2/2] cmd64x: set IDE_HFLAG_SERIALIZE explictly for CMD646
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/2] cmd64x: set IDE_HFLAG_SERIALIZE explictly for CMD646
  • From: Sergei Shtylyov
• Re: [PATCH] include old-style rb532 CompactFlash support
  • From: Phil Sutter
• Re: [PATCH] ide-gd: re-get floppy capacity on revalidate
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/2] cmd64x: set IDE_HFLAG_SERIALIZE explictly for CMD646
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] include old-style rb532 CompactFlash support
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] tx4938ide: Avoid underflow on calculation of a wait cycle
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/2] tx4938ide: Do not call devm_ioremap for whole 128KB
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] tx4938ide: Check minimum cycle time and SHWT range
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] include old-style rb532 CompactFlash support
  • From: Phil Sutter
• Re: Timeout regression introduced by 242f9dcb8ba6f68fcd217a119a7648a4f69290e9
  • From: Mike Anderson
• [Bug 11735] delkin_cb fails after resume
  • From: bugme-daemon
• [PATCH] include old-style rb532 CompactFlash support
  • From: Phil Sutter
• Re: Timeout regression introduced by 242f9dcb8ba6f68fcd217a119a7648a4f69290e9
  • From: James Bottomley
• Re: Timeout regression introduced by 242f9dcb8ba6f68fcd217a119a7648a4f69290e9
  • From: Jens Axboe
• [PATCH] ide-gd: re-get floppy capacity on revalidate
  • From: Borislav Petkov
• [RFC PATCH] ide-floppy partitions
  • From: Borislav Petkov
• Re: [PATCH 4/4] libata: clean up the SFF code for coding style
  • From: Tejun Heo
• [PATCH 1/5] storage-fixup: add ASUS F6S with seagate devices
  • From: Kel Modderman
• [PATCH 0/5] storage-fixup: add a new drive and some extras
  • From: Kel Modderman
• [PATCH 3/5] storage-fixup: make a quiet/silent mode work
  • From: Kel Modderman
• [PATCH 2/5] storage-fixup: fix typo of configuration filename
  • From: Kel Modderman
• [PATCH 4/5] storage-fixup: manual page
  • From: Kel Modderman
• [PATCH 5/5] storage-fixup: a Makefile
  • From: Kel Modderman
• [PATCH] tx4938ide: Avoid underflow on calculation of a wait cycle
  • From: Atsushi Nemoto
• Re: [PATCH 2.6.28-rc2] sata_promise: proper hardreset
  • From: Mikael Pettersson
• Re: Bug 11581
  • From: Santiago Vila
• Re: [PATCH 4/4] libata: clean up the SFF code for coding style
  • From: Elias Oltmanns
• Re: [PATCH 1/4] pata_ninja32: suspend/resume support
  • From: Alan Cox
• Re: [PATCH] ahci: Add support for Promise PDC42819
  • From: Mark Nelson
• Re: [PATCH] ahci: Add support for Promise PDC42819
  • From: Mark Nelson
• [PATCH v2] ahci: Add support for Promise PDC42819 (T3 controller)
  • From: Mark Nelson
• [git patches] libata updates
  • From: Jeff Garzik
• Re: [PATCH 1/4] pata_ninja32: suspend/resume support
  • From: Jeff Garzik
• Re: [PATCH] libata: ahci enclosure management led sync
  • From: Jeff Garzik
• Re: [PATCH] libata: ahci enclosure management bit mask
  • From: Jeff Garzik
• [PATCH 04/22 DESC UPDATED] libata-sff: clear IRQ from ata_sff_error_handler() only when necessary
  • From: Tejun Heo
• Re: [PATCH 04/22] libata-sff: clear IRQ from ata_sff_error_handler() only when necessary
  • From: Tejun Heo
• Re: [PATCH] ata: ata_id_is_ssd() bugfix
  • From: Jeff Garzik
• Re: [PATCHSET #upstream] libata: separate out SFF and BMDMA
  • From: Jeff Garzik
• Re: [PATCH 10/22] libata-sff: clean up BMDMA initialization
  • From: Jeff Garzik
• Re: [PATCH 04/22] libata-sff: clear IRQ from ata_sff_error_handler() only when necessary
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes 4/4] libata: perform port detach in EH
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes 2/4] libata: beef up iterators
  • From: Jeff Garzik
• Re: [patch, resend] libata: Fix LBA48 on pata_it821x RAID volumes.
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] libata: clear saved xfer_mode and ncq_enabled on device detach
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] sata_sil24: configure max read request size to 4k
  • From: Jeff Garzik
• Re: [PATCH] libata: add missing kernel-doc
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes 1/4 UPDATED] libata: fix device iteration bugs
  • From: Jeff Garzik
• Re: [PATCH] ahci: Add support for Promise PDC42819
  • From: Jeff Garzik
• Re: [PATCH 2.6.28-rc2] sata_promise: proper hardreset
  • From: Tejun Heo
• Re: Accessing 3.4 TB RAID Drive
  • From: Tejun Heo
• Re: [PATCH 0/1] sata_sil: Option to use IO space to access TF registers.
  • From: Tejun Heo
• Re: possible bug related to wodim / scsi
  • From: Tejun Heo
• Re: [PATCH 4/4] libata: clean up the SFF code for coding style
  • From: Tejun Heo
• Re: Timeout regression introduced by 242f9dcb8ba6f68fcd217a119a7648a4f69290e9
  • From: Tejun Heo
• Re: [PATCHSET #upstream] libata: separate out SFF and BMDMA
  • From: Tejun Heo
• Re: [PATCH 2/2] tx4938ide: Do not call devm_ioremap for whole 128KB
  • From: Sergei Shtylyov
• Re: [PATCH 2/2] cmd64x: set IDE_HFLAG_SERIALIZE explictly for CMD646
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] tx4938ide: Check minimum cycle time and SHWT range
  • From: Sergei Shtylyov
• Re: [PATCH 2/4] libata: Drain data on errors
  • From: Alan Cox
• Re: Timeout regression introduced by 242f9dcb8ba6f68fcd217a119a7648a4f69290e9
  • From: Mike Anderson
• Re: [PATCH] irq handler must disable the handled irq
  • From: Phil Sutter
• [PATCH] gayle: set IDE_HFLAG_SERIALIZE explictly
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/2] cmd64x: set IDE_HFLAG_SERIALIZE explictly for CMD646
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/2] ali14xx: doesn't use shared IRQs
  • From: Bartlomiej Zolnierkiewicz
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] irq handler must disable the handled irq
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] Switch to a common address
  • From: Bartlomiej Zolnierkiewicz
• Re: Problem w/ hotplug on sata_sil24 w/ PMP (sil3726)
  • From: Lars Michael Jogback
• Re: [PATCHSET #upstream] libata: separate out SFF and BMDMA
  • From: Mark Lord
• Re: [PATCH 2/4] libata: Drain data on errors
  • From: Mark Lord
• Fwd: [PATCH #upstream-fixes 1/4] libata: fix device iteration bugs
  • From: Guntsche Michael
• Re: [PATCH] irq handler must disable the handled irq
  • From: Phil Sutter
• [PATCH] Switch to a common address
  • From: Alan Cox
• Re: Timeout regression introduced by 242f9dcb8ba6f68fcd217a119a7648a4f69290e9
  • From: James Bottomley
• Re: [PATCH] libata: ahci enclosure management led sync
  • From: Tejun Heo
• Re: warning report
  • From: Tejun Heo
• Re: [PATCH 1/2] tx4938ide: Check minimum cycle time and SHWT range
  • From: Atsushi Nemoto
• Re: [PATCH] irq handler must disable the handled irq
  • From: Alan Cox
• [PATCH] irq handler must disable the handled irq
  • From: Phil Sutter
• Re: [PATCH 1/2] tx4938ide: Check minimum cycle time and SHWT range
  • From: Sergei Shtylyov
• [PATCH 2/2] tx4938ide: Do not call devm_ioremap for whole 128KB
  • From: Atsushi Nemoto
• [PATCH 1/2] tx4938ide: Check minimum cycle time and SHWT range
  • From: Atsushi Nemoto
• Re: Bug 11581
  • From: Boris Petkov
• Re: [PATCH #upstream-fixes 2/4] libata: beef up iterators
  • From: Elias Oltmanns
• Re: Bug 11581
  • From: Santiago Vila
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Sergei Shtylyov
• [PATCH #upstream-fixes 1/4 UPDATED] libata: fix device iteration bugs
  • From: Tejun Heo
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Boris Petkov
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Sergei Shtylyov
• Re: [PATCH #upstream-fixes 2/4] libata: beef up iterators
  • From: Tejun Heo
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Valerio Passini
• Re: [PATCH #upstream-fixes 2/4] libata: beef up iterators
  • From: Elias Oltmanns
• Re: [PATCH #upstream-fixes 1/4] libata: fix device iteration bugs
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes 2/4] libata: beef up iterators
  • From: Tejun Heo
• Re: Problem w/ hotplug on sata_sil24 w/ PMP (sil3726)
  • From: Lars Michael Jogback
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: FUJITA Tomonori
• Re: Problem w/ hotplug on sata_sil24 w/ PMP (sil3726)
  • From: Tejun Heo
• Re: Problem w/ hotplug on sata_sil24 w/ PMP (sil3726)
  • From: Tejun Heo
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Borislav Petkov
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: FUJITA Tomonori
• [PATCH] libata: add missing kernel-doc
  • From: Randy Dunlap
• Re: Timeout regression introduced by 242f9dcb8ba6f68fcd217a119a7648a4f69290e9
  • From: Tejun Heo
• Re: 2.6.27-rc1 (2fca5c): libata: kernel cant boot
  • From: Petr Vandrovec
• [PATCH 2.6.28-rc2] sata_promise: proper hardreset
  • From: Mikael Pettersson
• [patch, resend] libata: Fix LBA48 on pata_it821x RAID volumes.
  • From: Chuck Ebbert
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Valerio Passini
• Re: 2.6.27-rc1 (2fca5c): libata: kernel cant boot
  • From: Jens Axboe
• Re: Bug 11581
  • From: Borislav Petkov
• Re: Timeout regression introduced by 242f9dcb8ba6f68fcd217a119a7648a4f69290e9
  • From: James Bottomley
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Borislav Petkov
• Re: [PATCH #upstream-fixes 2/4] libata: beef up iterators
  • From: Elias Oltmanns
• Re: [PATCH #upstream-fixes 1/4] libata: fix device iteration bugs
  • From: Sergei Shtylyov
• Timeout regression introduced by 242f9dcb8ba6f68fcd217a119a7648a4f69290e9
  • From: Tejun Heo
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Valerio Passini
• [PATCH #upstream-fixes 4/4] libata: perform port detach in EH
  • From: Tejun Heo
• [PATCH #upstream-fixes 3/4] libata: when restoring SControl during detach do the PMP links first
  • From: Tejun Heo
• [PATCH #upstream-fixes 2/4] libata: beef up iterators
  • From: Tejun Heo
• [PATCH #upstream-fixes 1/4] libata: fix device iteration bugs
  • From: Tejun Heo
• Re: [PATCH 1/2 #upstream-fixes] sata_via: fix support for 5287
  • From: Tejun Heo
• [PATCH #upstream-fixes] libata: clear saved xfer_mode and ncq_enabled on device detach
  • From: Tejun Heo
• Re: linux-next: Tree for October 24 - powerpc - build failure with !CONFIG_BLK_DEV_IDEDMA_PMAC
  • From: Bartlomiej Zolnierkiewicz
• Re: linux-next: Tree for October 24 - powerpc - build failure with !CONFIG_BLK_DEV_IDEDMA_PMAC
  • From: Sergei Shtylyov
• Re: 2.6.27-rc1 (2fca5c): libata: kernel cant boot
  • From: Jens Axboe
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Borislav Petkov
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Sergei Shtylyov
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Sergei Shtylyov
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Borislav Petkov
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Borislav Petkov
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Sergei Shtylyov
• Re: linux-next: Tree for October 24 - powerpc - build failure with !CONFIG_BLK_DEV_IDEDMA_PMAC
  • From: Bartlomiej Zolnierkiewicz
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Bartlomiej Zolnierkiewicz
• Re: [smartmontools-support] SMART to USB/sata dock in 2.6.27-rc5 doesn't work
  • From: Mark Lord
• Re: 2.6.27-rc1 (2fca5c): libata: kernel cant boot
  • From: Petr Vandrovec
• [PATCH #upstream-fixes] sata_sil24: configure max read request size to 4k
  • From: Tejun Heo
• Re: linux-next: Tree for October 24 - powerpc - build failure with !CONFIG_BLK_DEV_IDEDMA_PMAC
  • From: Benjamin Herrenschmidt
• Re: linux-next: Tree for October 24 - powerpc - build failure with !CONFIG_BLK_DEV_IDEDMA_PMAC
  • From: Sergei Shtylyov
• Re: linux-next: Tree for October 24 - powerpc - build failure with !CONFIG_BLK_DEV_IDEDMA_PMAC
  • From: Benjamin Herrenschmidt
• Re: [PATCH] TXx9: Add TX4938 ATA support (v2)
  • From: Ralf Baechle
• Re: [PATCH] TXx9: Add TX4938 ATA support (v2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [Re: Linux 2.6.28-rc1] scsi 4:0:0:0: timing out command, waited 22s
  • From: Alan Cox
• Re: [smartmontools-support] SMART to USB/sata dock in 2.6.27-rc5 doesn't work
  • From: matthieu castet
• Re: [Re: Linux 2.6.28-rc1] scsi 4:0:0:0: timing out command, waited 22s
  • From: Maciej Rutecki
• Re: [Re: Linux 2.6.28-rc1] scsi 4:0:0:0: timing out command, waited 22s
  • From: James Bottomley
• Re: [Re: Linux 2.6.28-rc1] scsi 4:0:0:0: timing out command, waited 22s
  • From: Linus Torvalds
• Re: [Re: Linux 2.6.28-rc1] scsi 4:0:0:0: timing out command, waited 22s
  • From: Rafael J. Wysocki
• [Re: Linux 2.6.28-rc1] scsi 4:0:0:0: timing out command, waited 22s
  • From: Maciej Rutecki
• Re: [PATCH] ide: Add tx4938ide driver (v2)
  • From: Atsushi Nemoto
• Re: [PATCH] ide: Add tx4938ide driver (v2)
  • From: Atsushi Nemoto
• Re: [PATCH] ide: Add tx4938ide driver (v2)
  • From: Atsushi Nemoto
• Accessing 3.4 TB RAID Drive
  • From: PairOfTwins
• Promise PDC20376
  • From: David Ellingsworth
• Re: linux-next: Tree for October 24 - powerpc - build failure with !CONFIG_BLK_DEV_IDEDMA_PMAC
  • From: Sergei Shtylyov
• linux-next: Tree for October 24 - powerpc - build failure with !CONFIG_BLK_DEV_IDEDMA_PMAC
  • From: Kamalesh Babulal
• Re: [PATCH] ide: Add tx4938ide driver (v2)
  • From: Sergei Shtylyov
• Re: [Regression] 2.6.28-rc1 (2fca5c): libata: kernel cant boot (was: Re: 2.6.27-rc1 (2fca5c): libata: kernel cant boot)
  • From: Rafael J. Wysocki
• Re: 2.6.27-rc1 (2fca5c): libata: kernel cant boot
  • From: Jens Axboe
• Re: 2.6.27-rc1 (2fca5c): libata: kernel cant boot
  • From: Elias Oltmanns
• Re: [Regression] 2.6.28-rc1 (2fca5c): libata: kernel cant boot (was: Re: 2.6.27-rc1 (2fca5c): libata: kernel cant boot)
  • From: Jens Axboe
• Re: [PATCH 1/2] libata: get rid of ATA_MAX_QUEUE loop in ata_qc_complete_multiple()
  • From: Jens Axboe
• Re: [Regression] 2.6.28-rc1 (2fca5c): libata: kernel cant boot (was: Re: 2.6.27-rc1 (2fca5c): libata: kernel cant boot)
  • From: Rafael J. Wysocki
• Re: 2.6.27-rc1 (2fca5c): libata: kernel cant boot
  • From: Dave Young
• Re: [Regression] 2.6.28-rc1 (2fca5c): libata: kernel cant boot (was: Re: 2.6.27-rc1 (2fca5c): libata: kernel cant boot)
  • From: Jens Axboe
• [Regression] 2.6.28-rc1 (2fca5c): libata: kernel cant boot (was: Re: 2.6.27-rc1 (2fca5c): libata: kernel cant boot)
  • From: Rafael J. Wysocki
• Re: 2.6.27-rc1 (2fca5c): libata: kernel cant boot
  • From: Paul Mundt
• Re: 2.6.27-rc1 (2fca5c): libata: kernel cant boot
  • From: Jens Axboe
• Re: 2.6.27-rc1 (2fca5c): libata: kernel cant boot
  • From: Paul Mundt
• Re: 2.6.27-rc1 (2fca5c): libata: kernel cant boot
  • From: Jens Axboe
• Re: 2.6.27-rc1 (2fca5c): libata: kernel cant boot
  • From: Jens Axboe
• Re: [PATCH 2/2] libata: switch to using block layer tagging support
  • From: Paul Mundt
• 2.6.27-rc1 (2fca5c): libata: kernel cant boot
  • From: Alexander Beregalov
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Borislav Petkov
• Re: PIIX4: DMA timeout issue
  • From: gshan
• Re: [PATCH] TXx9: Add TX4938 ATA support (v2)
  • From: Sergei Shtylyov
• Re: [git pull] IDE updates #4
  • From: Sergei Shtylyov
• [git pull] IDE updates #5
  • From: Bartlomiej Zolnierkiewicz
• Re: [git pull] IDE updates #4
  • From: Bartlomiej Zolnierkiewicz
• Re: [git pull] IDE updates #4
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] cdrom: add TEAC CD-224E to the NO_AUTOCLOSE list
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: Add tx4938ide driver (v2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] TXx9: Add TX4938 ATA support (v2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: Add tx4939ide driver (v6)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: Add tx4939ide driver (v5)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] pci: use pci_ioremap_bar() in drivers/ide
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] pci: use pci_ioremap_bar() in drivers/ide
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/2] sgiioc4: use ide_host_add() (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] sgiioc4: fix error cleanup path (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [smartmontools-support] SMART to USB/sata dock in 2.6.27-rc5 doesn't work
  • From: Mark Lord
• Re: [smartmontools-support] SMART to USB/sata dock in 2.6.27-rc5 doesn't work
  • From: Mark Lord
• Re: [smartmontools-support] SMART to USB/sata dock in 2.6.27-rc5 doesn't work
  • From: matthieu castet
• Re: Problem w/ hotplug on sata_sil24 w/ PMP (sil3726)
  • From: Lars Michael Jogback
• Re: [PATCH] ide: Add tx4938ide driver (v2)
  • From: Sergei Shtylyov
• Re: [PATCH] TXx9: Add TX4938 ATA support (v2)
  • From: Sergei Shtylyov
• Re: sata_mv, io stucks
  • From: Bokhan Artem
• Re: sata_mv, io stucks
  • From: Mark Lord
• Re: [smartmontools-support] SMART to USB/sata dock in 2.6.27-rc5 doesn't work
  • From: Mark Lord
• Re: SMART to USB/sata dock in 2.6.27-rc5 doesn't work
  • From: Mark Lord
• Re: [git pull] IDE updates #4
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] libata: get rid of ATA_MAX_QUEUE loop in ata_qc_complete_multiple()
  • From: Elias Oltmanns
• Re: [PATCH] TXx9: Add TX4938 ATA support (v2)
  • From: Atsushi Nemoto
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Valerio Passini
• Re: [PATCH 1/2] libata: get rid of ATA_MAX_QUEUE loop in ata_qc_complete_multiple()
  • From: Jens Axboe
• Re: sata_mv, io stucks
  • From: Harri Olin
• Re: [PATCH] TXx9: Add TX4938 ATA support (v2)
  • From: Sergei Shtylyov
• Re: [PATCH] cdrom: add TEAC CD-224E to the NO_AUTOCLOSE list
  • From: Boris Petkov
• [PATCH] cdrom: add TEAC CD-224E to the NO_AUTOCLOSE list
  • From: Németh Márton
• Re: sata_mv, io stucks
  • From: Artem Bokhan
• Re: [PATCH 1/2] libata: get rid of ATA_MAX_QUEUE loop in ata_qc_complete_multiple()
  • From: Jens Axboe
• Re: [PATCH 0/1] sata_sil: Option to use IO space to access TF registers.
  • From: Alan Cox
• Re: [PATCH 1/2] libata: get rid of ATA_MAX_QUEUE loop in ata_qc_complete_multiple()
  • From: Jens Axboe
• Re: [PATCH 1/2] libata: get rid of ATA_MAX_QUEUE loop in ata_qc_complete_multiple()
  • From: Jens Axboe
• Re: [PATCH 2/2] libata: switch to using block layer tagging support
  • From: Jens Axboe
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Borislav Petkov
• Re: [PATCH 1/2] libata: get rid of ATA_MAX_QUEUE loop in ata_qc_complete_multiple()
  • From: Tejun Heo
• Re: [PATCH 2/2] libata: switch to using block layer tagging support
  • From: Tejun Heo
• [PATCH] ahci: Add support for Promise PDC42819
  • From: Mark Nelson
• Re: [PATCH #upstream-fixes] libata: set device class to NONE if phys_offline
  • From: Tejun Heo
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH 2/2] libata: switch to using block layer tagging support
  • From: Jeff Garzik
• Re: [PATCH 1/2 #upstream-fixes] sata_via: load DEVICE register when CTL changes
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] libata: set device class to NONE if phys_offline
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes, UDPATED] libata-eh: fix slave link EH action mask handling
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] libata: transfer EHI control flags to slave ehc.i
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] libata-sff: fix ata_sff_post_internal_cmd()
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] libata: initialize port_task when !CONFIG_ATA_SFF
  • From: Jeff Garzik
• Re: [PATCH] ata: Fix experimental tags
  • From: Jeff Garzik
• Re: [PATCH 4/4] libata: clean up the SFF code for coding style
  • From: Jeff Garzik
• Re: [PATCH 0/1] sata_sil: Option to use IO space to access TF registers.
  • From: Chris Dearman
• Re: [git pull] IDE updates #4
  • From: Sergei Shtylyov
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Valerio Passini
• Re: [git pull] IDE updates #4
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 0/1] sata_sil: Option to use IO space to access TF registers.
  • From: Alan Cox
• Re: [PATCH] ide: don't execute the next queued command from the hard-IRQ context
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] pci: use pci_ioremap_bar() in drivers/ide
  • From: Sergei Shtylyov
• Re: [PATCH] pci: use pci_ioremap_bar() in drivers/ide
  • From: Sergei Shtylyov
• Re: [PATCH] pci: use pci_ioremap_bar() in drivers/ide
  • From: Arjan van de Ven
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Bartlomiej Zolnierkiewicz
• Re: Smart plugging of multiple devices connected to a single controller
  • From: Elias Oltmanns
• [PATCH 1/1] sata_sil: Option to use IO space to access TF registers.
  • From: Chris Dearman
• [PATCH 0/1] sata_sil: Option to use IO space to access TF registers.
  • From: Chris Dearman
• Smart plugging of multiple devices connected to a single controller
  • From: Elias Oltmanns
• Re: [PATCH 1/2] libata: get rid of ATA_MAX_QUEUE loop in ata_qc_complete_multiple()
  • From: Elias Oltmanns
• Re: [PATCH] pci: use pci_ioremap_bar() in drivers/ide
  • From: Sergei Shtylyov
• Re: [PATCH] pci: use pci_ioremap_bar() in drivers/ide
  • From: Arjan van de Ven
• Re: [PATCH] pci: use pci_ioremap_bar() in drivers/ide
  • From: Sergei Shtylyov
• Re: [PATCH 2/4] libata: Drain data on errors
  • From: Alan Cox
• [PATCH] ide: Add tx4938ide driver (v2)
  • From: Atsushi Nemoto
• [PATCH] TXx9: Add TX4938 ATA support (v2)
  • From: Atsushi Nemoto
• [PATCH] ide: Add tx4939ide driver (v6)
  • From: Atsushi Nemoto
• Re: [PATCH 3/4] libata: Improve timeout handling
  • From: Alan Cox
• Re: [PATCH 4/4] libata: clean up the SFF code for coding style
  • From: Alan Cox
• Re: [PATCH] ide: Add tx4939ide driver (v5)
  • From: Atsushi Nemoto
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Boris Petkov
• Re: [PATCH 4/4] libata: clean up the SFF code for coding style
  • From: Elias Oltmanns
• Re: [PATCH 3/4] libata: Improve timeout handling
  • From: Elias Oltmanns
• Re: [PATCH 2/4] libata: Drain data on errors
  • From: Elias Oltmanns
• Re: [PATCH] ide: don't execute the next queued command from the hard-IRQ context
  • From: Elias Oltmanns
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Valerio Passini
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Valerio Passini
• Re: [git pull] IDE updates #4
  • From: Sergei Shtylyov
• Re: [git pull] IDE updates #4
  • From: Bartlomiej Zolnierkiewicz
• Re: [git pull] IDE updates #4
  • From: Sergei Shtylyov
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Boris Petkov
• Re: [PATCH #upstream-fixes] libata: set device class to NONE if phys_offline
  • From: Sergei Shtylyov
• [PATCH 2/2] libata: switch to using block layer tagging support
  • From: Jens Axboe
• [PATCH 1/2] libata: get rid of ATA_MAX_QUEUE loop in ata_qc_complete_multiple()
  • From: Jens Axboe
• [PATCH 0/2] libata tag patches
  • From: Jens Axboe
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: FUJITA Tomonori
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Borislav Petkov
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: FUJITA Tomonori
• Re: [git pull] IDE updates #4
  • From: Sergei Shtylyov
• [git pull] IDE updates #4
  • From: Bartlomiej Zolnierkiewicz
• Re: [Bugme-new] [Bug 11789] New: [sata_sil] failed to IDENTIFY (I/O error, err_mask=0x3)
  • From: Andrew Morton
• possible bug related to wodim / scsi
  • From: Mike Steiner
• Re: [stable] [PATCH #upstream-fixes] libata-eh: fix slave link EH action mask handling
  • From: Greg KH
• Re: [PATCH] ide: Add tx4939ide driver (v5)
  • From: Sergei Shtylyov
• [PATCH 20/22 UPDATED] libata-sff: separate out BMDMA init
  • From: Tejun Heo
• [PATCH 1/2 #upstream-fixes] sata_via: fix support for 5287
  • From: Tejun Heo
• [PATCH 1/2 #upstream-fixes] sata_via: load DEVICE register when CTL changes
  • From: Tejun Heo
• [PATCH #upstream-fixes] libata: set device class to NONE if phys_offline
  • From: Tejun Heo
• Re: [PATCH] ata: Fix experimental tags
  • From: Jeff Garzik
• Re: [PATCH] ata: Fix experimental tags
  • From: Sergei Shtylyov
• [PATCH] ata: Fix experimental tags
  • From: Alan Cox
• [PATCH 04/22, UPDATED] libata-sff: clear IRQ from ata_sff_error_handler() only when necessary
  • From: Tejun Heo
• Re: [PATCHSET #upstream] libata: separate out SFF and BMDMA
  • From: Tejun Heo
• [PATCH #upstream-fixes, UDPATED] libata-eh: fix slave link EH action mask handling
  • From: Tejun Heo
• Re: [PATCHSET #upstream] libata: separate out SFF and BMDMA
  • From: Sergei Shtylyov
• Re: [PATCH 21/22] sata_qstor: kill dummy BMDMA ops
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes] libata-eh: fix slave link EH action mask handling
  • From: Sergei Shtylyov
• Re: [PATCH 21/22] sata_qstor: kill dummy BMDMA ops
  • From: Sergei Shtylyov
• Re: [PATCH] pci: use pci_ioremap_bar() in drivers/ide
  • From: Sergei Shtylyov
• Re: [PATCH 04/22] libata-sff: clear IRQ from ata_sff_error_handler() only when necessary
  • From: Sergei Shtylyov
• Re: [smartmontools-support] inactive SATA drives won't stay in standby or sleep, PATA models did. (fwd)
  • From: Mikael Pettersson
• Re: [PATCHSET #upstream] libata: separate out SFF and BMDMA
  • From: Tejun Heo
• [PATCH 20/22] libata-sff: separate out BMDMA init
  • From: Tejun Heo
• [PATCH 22/22] libata-sff: make BMDMA optional
  • From: Tejun Heo
• [PATCH 19/22] libata-sff: separate out BMDMA irq handler
  • From: Tejun Heo
• [PATCH 16/22] libata-sff: prd is BMDMA specific
  • From: Tejun Heo
• [PATCH 21/22] sata_qstor: kill dummy BMDMA ops
  • From: Tejun Heo
• [PATCH 18/22] libata-sff: ata_sff_irq_clear() is BMDMA specific
  • From: Tejun Heo
• [PATCH 15/22] libata-sff: ata_sff_[dumb_]qc_prep are BMDMA specific
  • From: Tejun Heo
• [PATCH 10/22] libata-sff: clean up BMDMA initialization
  • From: Tejun Heo
• [PATCH 17/22] libata-sff: separate out BMDMA qc_issue
  • From: Tejun Heo
• [PATCH 13/22] libata-sff: port_task is SFF specific
  • From: Tejun Heo
• [PATCH 06/22] libata: kill ATA_FLAG_DISABLED
  • From: Tejun Heo
• [PATCH 08/22] libata-sff: reorder SFF/BMDMA functions
  • From: Tejun Heo
• [PATCH 14/22] libata-sff: separate out BMDMA EHs
  • From: Tejun Heo
• [PATCH 07/22] sata_inic162x: kill PORT_PRD_ADDR initialization
  • From: Tejun Heo
• [PATCH 11/22] libata-sff: introduce ata_sff_init/exit() and ata_sff_port_init()
  • From: Tejun Heo
• [PATCH 09/22] pata_cmd640/bf54x/icside: fix inheritance
  • From: Tejun Heo
• [PATCH 12/22] libata-sff: ap->[last_]ctl are SFF specific
  • From: Tejun Heo
• [PATCHSET #upstream] libata: separate out SFF and BMDMA
  • From: Tejun Heo
• [PATCH 05/22] libata-sff: kill unused prototype and make ata_dev_select() static
  • From: Tejun Heo
• [PATCH 03/22] sata_mv: remove unnecessary initialization
  • From: Tejun Heo
• [PATCH 02/22] sata_inic162x: inic162x is not dependent on CONFIG_ATA_SFF
  • From: Tejun Heo
• [PATCH 01/22] pata_sch: use ata_pci_sff_init_one()
  • From: Tejun Heo
• [PATCH 04/22] libata-sff: clear IRQ from ata_sff_error_handler() only when necessary
  • From: Tejun Heo
• Re: [smartmontools-support] inactive SATA drives won't stay in standby or sleep, PATA models did. (fwd)
  • From: Tejun Heo
• Re: [smartmontools-support] inactive SATA drives won't stay in standby or sleep, PATA models did. (fwd)
  • From: Tejun Heo
• Re: [smartmontools-support] inactive SATA drives won't stay in standby or sleep, PATA models did. (fwd)
  • From: Mikael Pettersson
• Re: [smartmontools-support] inactive SATA drives won't stay in standby or sleep, PATA models did. (fwd)
  • From: Mikael Pettersson
• Re: Can you please test the attached patch for nv hardreset problem?
  • From: gettinther
• [PATCH #upstream-fixes] libata: transfer EHI control flags to slave ehc.i
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes] libata-eh: fix slave link EH action mask handling
  • From: Tejun Heo
• [PATCH #upstream-fixes] libata-eh: fix slave link EH action mask handling
  • From: Tejun Heo
• [PATCH] pci: use pci_ioremap_bar() in drivers/ide
  • From: Arjan van de Ven
• Re: [smartmontools-support] inactive SATA drives won't stay in standby or sleep, PATA models did. (fwd)
  • From: Tejun Heo
• Re: ide/hpt366: remove unused variable
  • From: Sergei Shtylyov
• Re: ide/hpt366: remove unused variable
  • From: Sergei Shtylyov
• ide/hpt366: remove unused variable
  • From: Alexander Beregalov
• Re: [PATCH] ide: Add tx4938ide driver
  • From: Sergei Shtylyov
• Re: [PATCH] TXx9: Add TX4938 ATA support
  • From: Atsushi Nemoto
• Re: [PATCH] TXx9: Add TX4938 ATA support
  • From: Sergei Shtylyov
• Re: [PATCH] ide: Add tx4938ide driver
  • From: Atsushi Nemoto
• Re: [PATCH] TXx9: Add TX4938 ATA support
  • From: Atsushi Nemoto
• [PATCH 2/2] sgiioc4: use ide_host_add() (take 2)
  • From: Sergei Shtylyov
• [PATCH 1/2] sgiioc4: fix error cleanup path (take 2)
  • From: Sergei Shtylyov
• [PATCH] ide: Add tx4939ide driver (v5)
  • From: Atsushi Nemoto
• Re: [PATCH] ide: Add tx4939ide driver (v4)
  • From: Atsushi Nemoto
• Re: [PATCH 1/2] sgiioc4: fix error cleanup path
  • From: Sergei Shtylyov
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Borislav Petkov
• [PATCH #upstream-fixes] libata: initialize port_task when !CONFIG_ATA_SFF
  • From: Tejun Heo
• [PATCH #upstream-fixes] libata-sff: fix ata_sff_post_internal_cmd()
  • From: Tejun Heo
• Re: http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: FUJITA Tomonori
• Re: [smartmontools-support] inactive SATA drives won't stay in standby or sleep, PATA models did. (fwd)
  • From: Mikael Pettersson
• Re: [PATCH] ata: ata_id_is_ssd() bugfix
  • From: Jens Axboe
• Re: [PATCH] ata: ata_id_is_ssd() bugfix
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] TXx9: Add TX4938 ATA support
  • From: Sergei Shtylyov
• [PATCH 2/2] sgiioc4: use ide_host_add()
  • From: Sergei Shtylyov
• [PATCH 1/2] sgiioc4: fix error cleanup path
  • From: Sergei Shtylyov
• Re: [PATCH] ata: ata_id_is_ssd() bugfix
  • From: Jens Axboe
• Re: A USB enclosure that supports SCSI-ATA-Passthru (cheap!)
  • From: Mark Lord
• Re: [PATCH] ide: Add tx4938ide driver
  • From: Sergei Shtylyov
• A USB enclosure that supports SCSI-ATA-Passthru (cheap!)
  • From: Mark Lord
• Re: [PATCH] ide: Add tx4939ide driver (v4)
  • From: Sergei Shtylyov
• [PATCH] ide-disk: set non-rotational queue flag for SSD and CF devices
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ata: ata_id_is_ssd() bugfix
  • From: Bartlomiej Zolnierkiewicz
• http://bugzilla.kernel.org/show_bug.cgi?id=11742
  • From: Borislav Petkov
• Re: Problem w/ hotplug on sata_sil24 w/ PMP (sil3726)
  • From: Lars Michael Jogback
• Re: powerpc allmodconfig
  • From: Johannes Berg
• Re: [PATCH] ide: Add tx4939ide driver (v4)
  • From: Ralf Baechle
• Re: [RFC PATCH] falconide: remove needless ST-DMA locking
  • From: Bartlomiej Zolnierkiewicz
• Re: [RFC PATCH] falconide: remove needless ST-DMA locking
  • From: Geert Uytterhoeven
• Re: [RFC PATCH] falconide: remove needless ST-DMA locking
  • From: Michael Schmitz
• Re: UDMA with CS5530 using IBM Netvista N2200 (8363)
  • From: Alan Cox
• [RFC PATCH] falconide: remove needless ST-DMA locking
  • From: Bartlomiej Zolnierkiewicz
• Re: VIA SATA/PATA problem
  • From: Alan Hourihane
• [PATCH 4/4] libata: clean up the SFF code for coding style
  • From: Alan Cox
• [PATCH 3/4] libata: Improve timeout handling
  • From: Alan Cox
• [PATCH 2/4] libata: Drain data on errors
  • From: Alan Cox
• [PATCH 1/4] pata_ninja32: suspend/resume support
  • From: Alan Cox
• [PATCH 0/4] Small set of further libata patches
  • From: Alan Cox
• Re: how to limit number of sectors each time
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: Add tx4939ide driver (v4)
  • From: Bartlomiej Zolnierkiewicz
• [git pull] IDE updates #3
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: Add tx4939ide driver (v4)
  • From: Alan Cox
• Re: [PATCH] ide: Add tx4939ide driver (v4)
  • From: Ralf Baechle
• [PATCH] ide: Add tx4938ide driver
  • From: Atsushi Nemoto
• [PATCH] TXx9: Add TX4938 ATA support
  • From: Atsushi Nemoto
• [PATCH] ide: Add tx4939ide driver (v4)
  • From: Atsushi Nemoto
• sata_mv, io stucks
  • From: Artem Bokhan
• Re: powerpc allmodconfig
  • From: Ingo Molnar
• Re: Can you please test the attached patch for nv hardreset problem?
  • From: gettinther
• Re: ide-dma: fix ide_build_dmatable() for TRM290
  • From: Sergei Shtylyov
• Re: [PATCH] stop gcc warning about uninitialized 'dev' in ata_scsi_scan_host
  • From: Randy.Dunlap
• Re: [PATCH] stop gcc warning about uninitialized 'dev' in ata_scsi_scan_host
  • From: Alex Chiang
• Re: [PATCH] stop gcc warning about uninitialized 'dev' in ata_scsi_scan_host
  • From: Alex Chiang
• Re: powerpc allmodconfig
  • From: Arjan van de Ven
• Re: [PATCH] ide-cd: remove obsolete seek optimization
  • From: Bartlomiej Zolnierkiewicz
• Re: ide-dma: fix ide_build_dmatable() for TRM290
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] scc_pata: kill unused variables
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] sgiioc4: kill useless address checks
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] delkin_cb: add PM support
  • From: Bartlomiej Zolnierkiewicz
• Re: powerpc allmodconfig
  • From: David Miller
• [PATCH] scc_pata: kill unused variables
  • From: Sergei Shtylyov
• Re: powerpc allmodconfig
  • From: Atsushi Nemoto
• Re: [PATCH] ide: Add tx4939ide driver (v3)
  • From: Atsushi Nemoto
• Re: [PATCH] ide: Add tx4939ide driver (v3)
  • From: Sergei Shtylyov
• [Bug 11742] Device buffer on a DVD multi standard writer runs out burning a CD
  • From: bugme-daemon
• [Bug 11742] Device buffer on a DVD multi standard writer runs out burning a CD
  • From: bugme-daemon
• [Bug 11742] Device buffer on a DVD multi standard writer runs out burning a CD
  • From: bugme-daemon
• Re: [PATCH] ide: Add tx4939ide driver (v3)
  • From: Atsushi Nemoto
• Re: powerpc allmodconfig
  • From: Jesse Brandeburg
• Re: powerpc allmodconfig
  • From: Johannes Berg
• [Bug 11742] Device buffer on a DVD multi standard writer runs out burning a CD
  • From: bugme-daemon
• [Bug 11742] Device buffer on a DVD multi standard writer runs out burning a CD
  • From: bugme-daemon
• [Bug 11742] Device buffer on a DVD multi standard writer runs out burning a CD
  • From: bugme-daemon
• [PATCH] libata: ahci enclosure management led sync
  • From: David Milburn
• [Bug 11735] delkin_cb fails after resume
  • From: bugme-daemon
• [Bug 11742] Device buffer on a DVD multi standard writer runs out burning a CD
  • From: bugme-daemon
• Re: [PATCH] ide: Add tx4939ide driver (v3)
  • From: Sergei Shtylyov
• [Bug 11742] Device buffer on a DVD multi standard writer runs out burning a CD
  • From: bugme-daemon