From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
Subject: [PATCH] ide: move Power Management support to ide-pm.c
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
drivers/ide/Makefile | 2
drivers/ide/ide-io.c | 157 ----------------------------------
drivers/ide/ide-pm.c | 233 +++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/ide/ide.c | 74 ----------------
include/linux/ide.h | 8 +
5 files changed, 242 insertions(+), 232 deletions(-)
Index: b/drivers/ide/Makefile
===================================================================
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -5,7 +5,7 @@
EXTRA_CFLAGS += -Idrivers/ide
ide-core-y += ide.o ide-ioctls.o ide-io.o ide-iops.o ide-lib.o ide-probe.o \
- ide-taskfile.o ide-park.o ide-pio-blacklist.o
+ ide-taskfile.o ide-pm.o ide-park.o ide-pio-blacklist.o
# core IDE code
ide-core-$(CONFIG_IDE_TIMINGS) += ide-timings.o
Index: b/drivers/ide/ide-io.c
===================================================================
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -120,96 +120,6 @@ int ide_end_request (ide_drive_t *drive,
}
EXPORT_SYMBOL(ide_end_request);
-static void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
-{
- struct request_pm_state *pm = rq->data;
-
-#ifdef DEBUG_PM
- printk(KERN_INFO "%s: complete_power_step(step: %d)\n",
- drive->name, pm->pm_step);
-#endif
- if (drive->media != ide_disk)
- return;
-
- switch (pm->pm_step) {
- case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */
- if (pm->pm_state == PM_EVENT_FREEZE)
- pm->pm_step = IDE_PM_COMPLETED;
- else
- pm->pm_step = IDE_PM_STANDBY;
- break;
- case IDE_PM_STANDBY: /* Suspend step 2 (standby) */
- pm->pm_step = IDE_PM_COMPLETED;
- break;
- case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */
- pm->pm_step = IDE_PM_IDLE;
- break;
- case IDE_PM_IDLE: /* Resume step 2 (idle)*/
- pm->pm_step = IDE_PM_RESTORE_DMA;
- break;
- }
-}
-
-static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
-{
- struct request_pm_state *pm = rq->data;
- ide_task_t *args = rq->special;
-
- memset(args, 0, sizeof(*args));
-
- switch (pm->pm_step) {
- case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */
- if (drive->media != ide_disk)
- break;
- /* Not supported? Switch to next step now. */
- if (ata_id_flush_enabled(drive->id) == 0 ||
- (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
- ide_complete_power_step(drive, rq);
- return ide_stopped;
- }
- if (ata_id_flush_ext_enabled(drive->id))
- args->tf.command = ATA_CMD_FLUSH_EXT;
- else
- args->tf.command = ATA_CMD_FLUSH;
- goto out_do_tf;
- case IDE_PM_STANDBY: /* Suspend step 2 (standby) */
- args->tf.command = ATA_CMD_STANDBYNOW1;
- goto out_do_tf;
- case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */
- ide_set_max_pio(drive);
- /*
- * skip IDE_PM_IDLE for ATAPI devices
- */
- if (drive->media != ide_disk)
- pm->pm_step = IDE_PM_RESTORE_DMA;
- else
- ide_complete_power_step(drive, rq);
- return ide_stopped;
- case IDE_PM_IDLE: /* Resume step 2 (idle) */
- args->tf.command = ATA_CMD_IDLEIMMEDIATE;
- goto out_do_tf;
- case IDE_PM_RESTORE_DMA: /* Resume step 3 (restore DMA) */
- /*
- * Right now, all we do is call ide_set_dma(drive),
- * we could be smarter and check for current xfer_speed
- * in struct drive etc...
- */
- if (drive->hwif->dma_ops == NULL)
- break;
- if (drive->dev_flags & IDE_DFLAG_USING_DMA)
- ide_set_dma(drive);
- break;
- }
-
- pm->pm_step = IDE_PM_COMPLETED;
- return ide_stopped;
-
-out_do_tf:
- args->tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
- args->data_phase = TASKFILE_NO_DATA;
- return do_rw_taskfile(drive, args);
-}
-
/**
* ide_end_dequeued_request - complete an IDE I/O
* @drive: IDE device for the I/O
@@ -234,39 +144,6 @@ int ide_end_dequeued_request(ide_drive_t
}
EXPORT_SYMBOL_GPL(ide_end_dequeued_request);
-
-/**
- * ide_complete_pm_request - end the current Power Management request
- * @drive: target drive
- * @rq: request
- *
- * This function cleans up the current PM request and stops the queue
- * if necessary.
- */
-static void ide_complete_pm_request (ide_drive_t *drive, struct request *rq)
-{
- struct request_queue *q = drive->queue;
- unsigned long flags;
-
-#ifdef DEBUG_PM
- printk("%s: completing PM request, %s\n", drive->name,
- blk_pm_suspend_request(rq) ? "suspend" : "resume");
-#endif
- spin_lock_irqsave(q->queue_lock, flags);
- if (blk_pm_suspend_request(rq)) {
- blk_stop_queue(q);
- } else {
- drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
- blk_start_queue(q);
- }
- spin_unlock_irqrestore(q->queue_lock, flags);
-
- drive->hwif->hwgroup->rq = NULL;
-
- if (blk_end_request(rq, 0, 0))
- BUG();
-}
-
/**
* ide_end_drive_cmd - end an explicit drive command
* @drive: command
@@ -695,40 +572,6 @@ static ide_startstop_t ide_special_rq(id
}
}
-static void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
-{
- struct request_pm_state *pm = rq->data;
-
- if (blk_pm_suspend_request(rq) &&
- pm->pm_step == IDE_PM_START_SUSPEND)
- /* Mark drive blocked when starting the suspend sequence. */
- drive->dev_flags |= IDE_DFLAG_BLOCKED;
- else if (blk_pm_resume_request(rq) &&
- pm->pm_step == IDE_PM_START_RESUME) {
- /*
- * The first thing we do on wakeup is to wait for BSY bit to
- * go away (with a looong timeout) as a drive on this hwif may
- * just be POSTing itself.
- * We do that before even selecting as the "other" device on
- * the bus may be broken enough to walk on our toes at this
- * point.
- */
- ide_hwif_t *hwif = drive->hwif;
- int rc;
-#ifdef DEBUG_PM
- printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
-#endif
- rc = ide_wait_not_busy(hwif, 35000);
- if (rc)
- printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
- SELECT_DRIVE(drive);
- hwif->tp_ops->set_irq(hwif, 1);
- rc = ide_wait_not_busy(hwif, 100000);
- if (rc)
- printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
- }
-}
-
/**
* start_request - start of I/O and command issuing for IDE
*
Index: b/drivers/ide/ide-pm.c
===================================================================
--- /dev/null
+++ b/drivers/ide/ide-pm.c
@@ -0,0 +1,233 @@
+#include <linux/kernel.h>
+#include <linux/ide.h>
+#include <linux/hdreg.h>
+
+int generic_ide_suspend(struct device *dev, pm_message_t mesg)
+{
+ ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive);
+ ide_hwif_t *hwif = HWIF(drive);
+ struct request *rq;
+ struct request_pm_state rqpm;
+ ide_task_t args;
+ int ret;
+
+ /* call ACPI _GTM only once */
+ if ((drive->dn & 1) == 0 || pair == NULL)
+ ide_acpi_get_timing(hwif);
+
+ memset(&rqpm, 0, sizeof(rqpm));
+ memset(&args, 0, sizeof(args));
+ rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
+ rq->cmd_type = REQ_TYPE_PM_SUSPEND;
+ rq->special = &args;
+ rq->data = &rqpm;
+ rqpm.pm_step = IDE_PM_START_SUSPEND;
+ if (mesg.event == PM_EVENT_PRETHAW)
+ mesg.event = PM_EVENT_FREEZE;
+ rqpm.pm_state = mesg.event;
+
+ ret = blk_execute_rq(drive->queue, NULL, rq, 0);
+ blk_put_request(rq);
+
+ /* call ACPI _PS3 only after both devices are suspended */
+ if (ret == 0 && ((drive->dn & 1) || pair == NULL))
+ ide_acpi_set_state(hwif, 0);
+
+ return ret;
+}
+
+int generic_ide_resume(struct device *dev)
+{
+ ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive);
+ ide_hwif_t *hwif = HWIF(drive);
+ struct request *rq;
+ struct request_pm_state rqpm;
+ ide_task_t args;
+ int err;
+
+ /* call ACPI _PS0 / _STM only once */
+ if ((drive->dn & 1) == 0 || pair == NULL) {
+ ide_acpi_set_state(hwif, 1);
+ ide_acpi_push_timing(hwif);
+ }
+
+ ide_acpi_exec_tfs(drive);
+
+ memset(&rqpm, 0, sizeof(rqpm));
+ memset(&args, 0, sizeof(args));
+ rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
+ rq->cmd_type = REQ_TYPE_PM_RESUME;
+ rq->cmd_flags |= REQ_PREEMPT;
+ rq->special = &args;
+ rq->data = &rqpm;
+ rqpm.pm_step = IDE_PM_START_RESUME;
+ rqpm.pm_state = PM_EVENT_ON;
+
+ err = blk_execute_rq(drive->queue, NULL, rq, 1);
+ blk_put_request(rq);
+
+ if (err == 0 && dev->driver) {
+ ide_driver_t *drv = to_ide_driver(dev->driver);
+
+ if (drv->resume)
+ drv->resume(drive);
+ }
+
+ return err;
+}
+
+void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
+{
+ struct request_pm_state *pm = rq->data;
+
+#ifdef DEBUG_PM
+ printk(KERN_INFO "%s: complete_power_step(step: %d)\n",
+ drive->name, pm->pm_step);
+#endif
+ if (drive->media != ide_disk)
+ return;
+
+ switch (pm->pm_step) {
+ case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */
+ if (pm->pm_state == PM_EVENT_FREEZE)
+ pm->pm_step = IDE_PM_COMPLETED;
+ else
+ pm->pm_step = IDE_PM_STANDBY;
+ break;
+ case IDE_PM_STANDBY: /* Suspend step 2 (standby) */
+ pm->pm_step = IDE_PM_COMPLETED;
+ break;
+ case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */
+ pm->pm_step = IDE_PM_IDLE;
+ break;
+ case IDE_PM_IDLE: /* Resume step 2 (idle)*/
+ pm->pm_step = IDE_PM_RESTORE_DMA;
+ break;
+ }
+}
+
+ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
+{
+ struct request_pm_state *pm = rq->data;
+ ide_task_t *args = rq->special;
+
+ memset(args, 0, sizeof(*args));
+
+ switch (pm->pm_step) {
+ case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */
+ if (drive->media != ide_disk)
+ break;
+ /* Not supported? Switch to next step now. */
+ if (ata_id_flush_enabled(drive->id) == 0 ||
+ (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
+ ide_complete_power_step(drive, rq);
+ return ide_stopped;
+ }
+ if (ata_id_flush_ext_enabled(drive->id))
+ args->tf.command = ATA_CMD_FLUSH_EXT;
+ else
+ args->tf.command = ATA_CMD_FLUSH;
+ goto out_do_tf;
+ case IDE_PM_STANDBY: /* Suspend step 2 (standby) */
+ args->tf.command = ATA_CMD_STANDBYNOW1;
+ goto out_do_tf;
+ case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */
+ ide_set_max_pio(drive);
+ /*
+ * skip IDE_PM_IDLE for ATAPI devices
+ */
+ if (drive->media != ide_disk)
+ pm->pm_step = IDE_PM_RESTORE_DMA;
+ else
+ ide_complete_power_step(drive, rq);
+ return ide_stopped;
+ case IDE_PM_IDLE: /* Resume step 2 (idle) */
+ args->tf.command = ATA_CMD_IDLEIMMEDIATE;
+ goto out_do_tf;
+ case IDE_PM_RESTORE_DMA: /* Resume step 3 (restore DMA) */
+ /*
+ * Right now, all we do is call ide_set_dma(drive),
+ * we could be smarter and check for current xfer_speed
+ * in struct drive etc...
+ */
+ if (drive->hwif->dma_ops == NULL)
+ break;
+ if (drive->dev_flags & IDE_DFLAG_USING_DMA)
+ ide_set_dma(drive);
+ break;
+ }
+
+ pm->pm_step = IDE_PM_COMPLETED;
+ return ide_stopped;
+
+out_do_tf:
+ args->tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ args->data_phase = TASKFILE_NO_DATA;
+ return do_rw_taskfile(drive, args);
+}
+
+/**
+ * ide_complete_pm_request - end the current Power Management request
+ * @drive: target drive
+ * @rq: request
+ *
+ * This function cleans up the current PM request and stops the queue
+ * if necessary.
+ */
+void ide_complete_pm_request(ide_drive_t *drive, struct request *rq)
+{
+ struct request_queue *q = drive->queue;
+ unsigned long flags;
+
+#ifdef DEBUG_PM
+ printk("%s: completing PM request, %s\n", drive->name,
+ blk_pm_suspend_request(rq) ? "suspend" : "resume");
+#endif
+ spin_lock_irqsave(q->queue_lock, flags);
+ if (blk_pm_suspend_request(rq)) {
+ blk_stop_queue(q);
+ } else {
+ drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
+ blk_start_queue(q);
+ }
+ spin_unlock_irqrestore(q->queue_lock, flags);
+
+ drive->hwif->hwgroup->rq = NULL;
+
+ if (blk_end_request(rq, 0, 0))
+ BUG();
+}
+
+void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
+{
+ struct request_pm_state *pm = rq->data;
+
+ if (blk_pm_suspend_request(rq) &&
+ pm->pm_step == IDE_PM_START_SUSPEND)
+ /* Mark drive blocked when starting the suspend sequence. */
+ drive->dev_flags |= IDE_DFLAG_BLOCKED;
+ else if (blk_pm_resume_request(rq) &&
+ pm->pm_step == IDE_PM_START_RESUME) {
+ /*
+ * The first thing we do on wakeup is to wait for BSY bit to
+ * go away (with a looong timeout) as a drive on this hwif may
+ * just be POSTing itself.
+ * We do that before even selecting as the "other" device on
+ * the bus may be broken enough to walk on our toes at this
+ * point.
+ */
+ ide_hwif_t *hwif = drive->hwif;
+ int rc;
+#ifdef DEBUG_PM
+ printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
+#endif
+ rc = ide_wait_not_busy(hwif, 35000);
+ if (rc)
+ printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
+ SELECT_DRIVE(drive);
+ hwif->tp_ops->set_irq(hwif, 1);
+ rc = ide_wait_not_busy(hwif, 100000);
+ if (rc)
+ printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
+ }
+}
Index: b/drivers/ide/ide.c
===================================================================
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -388,80 +388,6 @@ ide_ext_devset_rw_sync(unmaskirq, unmask
ide_ext_devset_rw_sync(using_dma, using_dma);
__IDE_DEVSET(pio_mode, DS_SYNC, NULL, set_pio_mode);
-static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
-{
- ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive);
- ide_hwif_t *hwif = HWIF(drive);
- struct request *rq;
- struct request_pm_state rqpm;
- ide_task_t args;
- int ret;
-
- /* call ACPI _GTM only once */
- if ((drive->dn & 1) == 0 || pair == NULL)
- ide_acpi_get_timing(hwif);
-
- memset(&rqpm, 0, sizeof(rqpm));
- memset(&args, 0, sizeof(args));
- rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
- rq->cmd_type = REQ_TYPE_PM_SUSPEND;
- rq->special = &args;
- rq->data = &rqpm;
- rqpm.pm_step = IDE_PM_START_SUSPEND;
- if (mesg.event == PM_EVENT_PRETHAW)
- mesg.event = PM_EVENT_FREEZE;
- rqpm.pm_state = mesg.event;
-
- ret = blk_execute_rq(drive->queue, NULL, rq, 0);
- blk_put_request(rq);
-
- /* call ACPI _PS3 only after both devices are suspended */
- if (ret == 0 && ((drive->dn & 1) || pair == NULL))
- ide_acpi_set_state(hwif, 0);
-
- return ret;
-}
-
-static int generic_ide_resume(struct device *dev)
-{
- ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive);
- ide_hwif_t *hwif = HWIF(drive);
- struct request *rq;
- struct request_pm_state rqpm;
- ide_task_t args;
- int err;
-
- /* call ACPI _PS0 / _STM only once */
- if ((drive->dn & 1) == 0 || pair == NULL) {
- ide_acpi_set_state(hwif, 1);
- ide_acpi_push_timing(hwif);
- }
-
- ide_acpi_exec_tfs(drive);
-
- memset(&rqpm, 0, sizeof(rqpm));
- memset(&args, 0, sizeof(args));
- rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
- rq->cmd_type = REQ_TYPE_PM_RESUME;
- rq->cmd_flags |= REQ_PREEMPT;
- rq->special = &args;
- rq->data = &rqpm;
- rqpm.pm_step = IDE_PM_START_RESUME;
- rqpm.pm_state = PM_EVENT_ON;
-
- err = blk_execute_rq(drive->queue, NULL, rq, 1);
- blk_put_request(rq);
-
- if (err == 0 && dev->driver) {
- ide_driver_t *drv = to_ide_driver(dev->driver);
-
- if (drv->resume)
- drv->resume(drive);
- }
-
- return err;
-}
-
/**
* ide_device_get - get an additional reference to a ide_drive_t
* @drive: device to get a reference to
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1109,6 +1109,14 @@ enum {
IDE_PM_COMPLETED,
};
+int generic_ide_suspend(struct device *, pm_message_t);
+int generic_ide_resume(struct device *);
+
+void ide_complete_power_step(ide_drive_t *, struct request *);
+ide_startstop_t ide_start_power_step(ide_drive_t *, struct request *);
+void ide_complete_pm_request(ide_drive_t *, struct request *);
+void ide_check_pm_state(ide_drive_t *, struct request *);
+
/*
* Subdrivers support.
*
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
