Jens Axboe wrote:
On Fri, Oct 24 2008, Elias Oltmanns wrote:
Jens Axboe <jens.axboe@xxxxxxxxxx> wrote:
From e598055dde1951c47c8b3522616f6ebff0ed9847 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@xxxxxxxxxx>
Date: Fri, 24 Oct 2008 09:22:42 +0200
Subject: [PATCH] libata: fix bug with non-ncq devices
The recent commit 201f1b98822078c808b5e2d379a6ddbfc0a06ee1 to enable
Wouldn't that be commit 2fca5ccf97d2c28bcfce44f5b07d85e74e3cd18e?
Yes that is correct, the other commit is actually a private one in my
tree for other libata changes. Updated patch below, thanks for checking!
From e598055dde1951c47c8b3522616f6ebff0ed9847 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@xxxxxxxxxx>
Date: Fri, 24 Oct 2008 09:22:42 +0200
Subject: [PATCH] libata: fix bug with non-ncq devices
Hello,
this fixes my DVD, but unfortunately NCQ devices connected to PMP are
still dead - apparently as soon as mount() tries to do serious I/O on
the drive. Backing out both post-2.6.28-rc1 fix as well as your
original change brings storage back. I suspect that problem is that
with PMP same tag cannot be (should not be? must not be?) used on
multiple devices behind PMP - and before your change tags were allocated
per-port, while now they are allocated per-device.
Petr
P.S.: And disk connected to port #0 required poweroff/poweron cycle to
get back to life.
Oct 25 02:21:54 gwy kernel: sata_sil24 0000:05:00.0: version 1.1
Oct 25 02:21:54 gwy kernel: ACPI: PCI Interrupt Link [APC5] enabled at
IRQ 16
Oct 25 02:21:54 gwy kernel: sata_sil24 0000:05:00.0: PCI INT A ->
Link[APC5] -> GSI 16 (level, low) -> IRQ 16
Oct 25 02:21:54 gwy kernel: sata_sil24 0000:05:00.0: setting latency
timer to 64
Oct 25 02:21:54 gwy kernel: scsi6 : sata_sil24
Oct 25 02:21:54 gwy kernel: scsi7 : sata_sil24
Oct 25 02:21:54 gwy kernel: ata7: SATA max UDMA/100 host m128@0xfdaff000
port 0xfdaf8000 irq 16
Oct 25 02:21:54 gwy kernel: ata8: SATA max UDMA/100 host m128@0xfdaff000
port 0xfdafa000 irq 16
Oct 25 02:21:54 gwy kernel: ata8: SATA link up 3.0 Gbps (SStatus 123
SControl 0)
Oct 25 02:21:54 gwy kernel: ata8.15: Port Multiplier 1.1, 0x1095:0x3726
r23, 6 ports, feat 0x1/0x9
Oct 25 02:21:54 gwy kernel: ata8.00: hard resetting link
Oct 25 02:21:54 gwy kernel: ata8.00: SATA link up 3.0 Gbps (SStatus 123
SControl 320)
Oct 25 02:21:54 gwy kernel: ata8.01: hard resetting link
Oct 25 02:21:54 gwy kernel: ata8.01: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 25 02:21:54 gwy kernel: ata8.02: hard resetting link
Oct 25 02:21:54 gwy kernel: ata8.02: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 25 02:21:54 gwy kernel: ata8.03: hard resetting link
Oct 25 02:21:54 gwy kernel: ata8.03: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 25 02:21:54 gwy kernel: ata8.04: hard resetting link
Oct 25 02:21:54 gwy kernel: ata8.04: SATA link down (SStatus 0 SControl 320)
Oct 25 02:21:54 gwy kernel: ata8.05: hard resetting link
Oct 25 02:21:54 gwy kernel: ata8.05: SATA link up 1.5 Gbps (SStatus 113
SControl 320)
Oct 25 02:21:54 gwy kernel: ata8.00: failed to IDENTIFY (I/O error,
err_mask=0x11)
Oct 25 02:21:54 gwy kernel: ata8.15: hard resetting link
Oct 25 02:21:54 gwy kernel: ata8: controller in dubious state,
performing PORT_RST
Oct 25 02:21:54 gwy kernel: ata8.15: SATA link up 3.0 Gbps (SStatus 123
SControl 0)
Oct 25 02:21:54 gwy kernel: ata8.00: hard resetting link
Oct 25 02:21:54 gwy kernel: ata8.00: SATA link up 3.0 Gbps (SStatus 123
SControl 320)
Oct 25 02:21:54 gwy kernel: ata8.01: hard resetting link
Oct 25 02:21:54 gwy kernel: ata8.01: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 25 02:21:54 gwy kernel: ata8.02: hard resetting link
Oct 25 02:21:54 gwy kernel: ata8.02: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 25 02:21:54 gwy kernel: ata8.03: hard resetting link
Oct 25 02:21:54 gwy kernel: ata8.03: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 25 02:21:54 gwy kernel: ata8.05: hard resetting link
Oct 25 02:21:54 gwy kernel: ata8.05: SATA link up 1.5 Gbps (SStatus 113
SControl 320)
Oct 25 02:21:54 gwy kernel: ata8.00: failed to IDENTIFY (I/O error,
err_mask=0x11)
Oct 25 02:21:54 gwy kernel: ata8.15: hard resetting link
Oct 25 02:21:54 gwy kernel: ata8: controller in dubious state,
performing PORT_RST
Oct 25 02:21:54 gwy kernel: ata8.15: SATA link up 3.0 Gbps (SStatus 123
SControl 0)
Oct 25 02:21:54 gwy kernel: ata8.00: hard resetting link
Oct 25 02:21:54 gwy kernel: ata8.00: SATA link up 3.0 Gbps (SStatus 123
SControl 320)
Oct 25 02:21:54 gwy kernel: ata8.01: hard resetting link
Oct 25 02:21:54 gwy kernel: ata8.01: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 25 02:21:54 gwy kernel: ata8.02: hard resetting link
Oct 25 02:21:54 gwy kernel: ata8.02: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 25 02:21:54 gwy kernel: ata8.03: hard resetting link
Oct 25 02:21:54 gwy kernel: ata8.03: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 25 02:21:54 gwy kernel: ata8.04: hard resetting link
Oct 25 02:21:54 gwy kernel: ata8.04: SATA link down (SStatus 0 SControl 320)
Oct 25 02:21:54 gwy kernel: ata8.05: hard resetting link
Oct 25 02:21:54 gwy kernel: ata8.05: SATA link up 1.5 Gbps (SStatus 113
SControl 320)
Oct 25 02:21:54 gwy kernel: ata8.00: failed to IDENTIFY (I/O error,
err_mask=0x11)
Oct 25 02:21:54 gwy kernel: ata8.00: failed to recover link after 3
tries, disabling
Oct 25 02:21:54 gwy kernel: ata8.15: hard resetting link
Oct 25 02:21:54 gwy kernel: ata8: controller in dubious state,
performing PORT_RST
Oct 25 02:21:54 gwy kernel: ata8.15: SATA link up 3.0 Gbps (SStatus 123
SControl 0)
Oct 25 02:21:54 gwy kernel: ata8.01: hard resetting link
Oct 25 02:21:54 gwy kernel: ata8.01: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 25 02:21:54 gwy kernel: ata8.02: hard resetting link
Oct 25 02:21:54 gwy kernel: ata8.02: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 25 02:21:54 gwy kernel: ata8.03: hard resetting link
Oct 25 02:21:54 gwy kernel: ata8.03: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 25 02:21:54 gwy kernel: ata8.05: hard resetting link
Oct 25 02:21:54 gwy kernel: ata8.05: SATA link up 1.5 Gbps (SStatus 113
SControl 320)
Oct 25 02:21:54 gwy kernel: ata8.01: ATA-7: Hitachi HDS721010KLA330,
GKAOA70M, max UDMA/133
Oct 25 02:21:54 gwy kernel: ata8.01: 1953525168 sectors, multi 16: LBA48
NCQ (depth 31/32)
Oct 25 02:21:54 gwy kernel: ata8.01: configured for UDMA/100
Oct 25 02:21:54 gwy kernel: ata8.02: ATA-7: Hitachi HDS721010KLA330,
GKAOA70F, max UDMA/133
Oct 25 02:21:54 gwy kernel: ata8.02: 1953525168 sectors, multi 16: LBA48
NCQ (depth 31/32)
Oct 25 02:21:54 gwy kernel: ata8.02: configured for UDMA/100
Oct 25 02:21:54 gwy kernel: ata8.03: ATA-7: Hitachi HDS721010KLA330,
GKAOA70M, max UDMA/133
Oct 25 02:21:54 gwy kernel: ata8.03: 1953525168 sectors, multi 16: LBA48
NCQ (depth 31/32)
Oct 25 02:21:54 gwy kernel: ata8.03: configured for UDMA/100
Oct 25 02:21:54 gwy kernel: ata8: EH complete
Oct 25 02:21:54 gwy kernel: scsi 7:1:0:0: Direct-Access ATA
Hitachi HDS72101 GKAO PQ: 0 ANSI: 5
Oct 25 02:21:54 gwy kernel: sd 7:1:0:0: [sdh] 1953525168 512-byte
hardware sectors: (1000GB/931GiB)
Oct 25 02:21:54 gwy kernel: sd 7:1:0:0: [sdh] Write Protect is off
Oct 25 02:21:54 gwy kernel: sd 7:1:0:0: [sdh] Mode Sense: 00 3a 00 00
Oct 25 02:21:54 gwy kernel: sd 7:1:0:0: [sdh] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA
Oct 25 02:21:54 gwy kernel: sd 7:1:0:0: [sdh] 1953525168 512-byte
hardware sectors: (1000GB/931GiB)
Oct 25 02:21:54 gwy kernel: sd 7:1:0:0: [sdh] Write Protect is off
Oct 25 02:21:54 gwy kernel: sd 7:1:0:0: [sdh] Mode Sense: 00 3a 00 00
Oct 25 02:21:54 gwy kernel: sd 7:1:0:0: [sdh] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA
Oct 25 02:21:54 gwy kernel: sdh: sdh1
Oct 25 02:21:54 gwy kernel: sd 7:1:0:0: [sdh] Attached SCSI disk
Oct 25 02:21:54 gwy kernel: sd 7:1:0:0: Attached scsi generic sg9 type 0
Oct 25 02:21:54 gwy kernel: scsi 7:2:0:0: Direct-Access ATA
Hitachi HDS72101 GKAO PQ: 0 ANSI: 5
Oct 25 02:21:54 gwy kernel: sd 7:2:0:0: [sdi] 1953525168 512-byte
hardware sectors: (1000GB/931GiB)
Oct 25 02:21:54 gwy kernel: sd 7:2:0:0: [sdi] Write Protect is off
Oct 25 02:21:54 gwy kernel: sd 7:2:0:0: [sdi] Mode Sense: 00 3a 00 00
Oct 25 02:21:54 gwy kernel: sd 7:2:0:0: [sdi] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA
Oct 25 02:21:54 gwy kernel: sd 7:2:0:0: [sdi] 1953525168 512-byte
hardware sectors: (1000GB/931GiB)
Oct 25 02:21:54 gwy kernel: sd 7:2:0:0: [sdi] Write Protect is off
Oct 25 02:21:54 gwy kernel: sd 7:2:0:0: [sdi] Mode Sense: 00 3a 00 00
Oct 25 02:21:54 gwy kernel: sd 7:2:0:0: [sdi] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA
Oct 25 02:21:54 gwy kernel: sdi: sdi1
Oct 25 02:21:54 gwy kernel: sd 7:2:0:0: [sdi] Attached SCSI disk
Oct 25 02:21:54 gwy kernel: sd 7:2:0:0: Attached scsi generic sg10 type 0
Oct 25 02:21:54 gwy kernel: scsi 7:3:0:0: Direct-Access ATA
Hitachi HDS72101 GKAO PQ: 0 ANSI: 5
Oct 25 02:21:54 gwy kernel: sd 7:3:0:0: [sdj] 1953525168 512-byte
hardware sectors: (1000GB/931GiB)
Oct 25 02:21:54 gwy kernel: sd 7:3:0:0: [sdj] Write Protect is off
Oct 25 02:21:54 gwy kernel: sd 7:3:0:0: [sdj] Mode Sense: 00 3a 00 00
Oct 25 02:21:54 gwy kernel: sd 7:3:0:0: [sdj] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA
Oct 25 02:21:54 gwy kernel: sd 7:3:0:0: [sdj] 1953525168 512-byte
hardware sectors: (1000GB/931GiB)
Oct 25 02:21:54 gwy kernel: sd 7:3:0:0: [sdj] Write Protect is off
Oct 25 02:21:54 gwy kernel: sd 7:3:0:0: [sdj] Mode Sense: 00 3a 00 00
Oct 25 02:21:54 gwy kernel: sd 7:3:0:0: [sdj] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA
Oct 25 02:21:54 gwy kernel: sdj: sdj1
Oct 25 02:21:54 gwy kernel: sd 7:3:0:0: [sdj] Attached SCSI disk
Oct 25 02:21:54 gwy kernel: sd 7:3:0:0: Attached scsi generic sg11 type 0
Oct 25 02:23:09 gwy kernel: ata8.03: exception Emask 0x10 SAct 0x0 SErr
0x4010000 action 0xf
Oct 25 02:23:09 gwy kernel: ata8.03: SError: { PHYRdyChg DevExch }
Oct 25 02:23:09 gwy kernel: ata8.00: failed to read SCR 2 (Emask=0x40)
Oct 25 02:23:09 gwy kernel: ata8.00: COMRESET failed (errno=-5)
Oct 25 02:23:09 gwy kernel: ata8.00: failed to write SCR 1 (Emask=0x40)
Oct 25 02:23:09 gwy kernel: ata8.00: failed to clear SError.N (errno=-5)
Oct 25 02:23:09 gwy kernel: ata8.15: hard resetting link
Oct 25 02:23:11 gwy kernel: ata8.15: SATA link down (SStatus 0 SControl 0)
Oct 25 02:23:14 gwy kernel: ata8.15: failed to read PMP GSCR[0] (Emask=0x1)
Oct 25 02:23:14 gwy kernel: ata8.15: PMP revalidation failed (errno=-5)
Oct 25 02:23:16 gwy kernel: ata8.15: hard resetting link
Oct 25 02:23:18 gwy kernel: ata8.15: SATA link up 3.0 Gbps (SStatus 123
SControl 0)
Oct 25 02:23:18 gwy kernel: ata8.01: hard resetting link
Oct 25 02:23:19 gwy kernel: ata8.01: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 25 02:23:19 gwy kernel: ata8.02: hard resetting link
Oct 25 02:23:19 gwy kernel: ata8.02: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 25 02:23:19 gwy kernel: ata8.03: hard resetting link
Oct 25 02:23:20 gwy kernel: ata8.03: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 25 02:23:20 gwy kernel: ata8.04: hard resetting link
Oct 25 02:23:20 gwy kernel: ata8.04: SATA link down (SStatus 0 SControl 320)
Oct 25 02:23:20 gwy kernel: ata8.05: hard resetting link
Oct 25 02:23:21 gwy kernel: ata8.05: SATA link up 1.5 Gbps (SStatus 113
SControl 320)
Oct 25 02:23:21 gwy kernel: ata8.01: failed to IDENTIFY (I/O error,
err_mask=0x11)
Oct 25 02:23:21 gwy kernel: ata8.01: revalidation failed (errno=-5)
Oct 25 02:23:23 gwy kernel: ata8.15: hard resetting link
Oct 25 02:23:23 gwy kernel: ata8: controller in dubious state,
performing PORT_RST
Oct 25 02:23:25 gwy kernel: ata8.15: SATA link up 3.0 Gbps (SStatus 123
SControl 0)
Oct 25 02:23:26 gwy kernel: ata8.01: hard resetting link
Oct 25 02:23:26 gwy kernel: ata8.01: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 25 02:23:26 gwy kernel: ata8.02: hard resetting link
Oct 25 02:23:26 gwy kernel: ata8.02: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 25 02:23:26 gwy kernel: ata8.03: hard resetting link
Oct 25 02:23:27 gwy kernel: ata8.03: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 25 02:23:27 gwy kernel: ata8.05: hard resetting link
Oct 25 02:23:27 gwy kernel: ata8.05: SATA link up 1.5 Gbps (SStatus 113
SControl 320)
Oct 25 02:23:27 gwy kernel: ata8.01: failed to IDENTIFY (I/O error,
err_mask=0x11)
Oct 25 02:23:27 gwy kernel: ata8.01: revalidation failed (errno=-5)
Oct 25 02:23:30 gwy kernel: ata8.15: hard resetting link
Oct 25 02:23:30 gwy kernel: ata8: controller in dubious state,
performing PORT_RST
Oct 25 02:23:33 gwy kernel: ata8.15: SATA link up 3.0 Gbps (SStatus 123
SControl 0)
Oct 25 02:23:33 gwy kernel: ata8.01: hard resetting link
Oct 25 02:23:33 gwy kernel: ata8.01: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 25 02:23:33 gwy kernel: ata8.02: hard resetting link
Oct 25 02:23:34 gwy kernel: ata8.02: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 25 02:23:34 gwy kernel: ata8.03: hard resetting link
Oct 25 02:23:34 gwy kernel: ata8.03: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 25 02:23:34 gwy kernel: ata8.04: hard resetting link
Oct 25 02:23:34 gwy kernel: ata8.04: SATA link down (SStatus 0 SControl 320)
Oct 25 02:23:34 gwy kernel: ata8.05: hard resetting link
Oct 25 02:23:35 gwy kernel: ata8.05: SATA link up 1.5 Gbps (SStatus 113
SControl 320)
Oct 25 02:23:35 gwy kernel: ata8.01: configured for UDMA/100
Oct 25 02:23:35 gwy kernel: ata8.02: failed to IDENTIFY (I/O error,
err_mask=0x11)
Oct 25 02:23:35 gwy kernel: ata8.02: revalidation failed (errno=-5)
Oct 25 02:23:38 gwy kernel: ata8.15: hard resetting link
Oct 25 02:23:38 gwy kernel: ata8: controller in dubious state,
performing PORT_RST
Oct 25 02:23:40 gwy kernel: ata8.15: SATA link up 3.0 Gbps (SStatus 123
SControl 0)
Oct 25 02:23:40 gwy kernel: ata8.01: hard resetting link
Oct 25 02:23:40 gwy kernel: ata8.01: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 25 02:23:40 gwy kernel: ata8.02: hard resetting link
Oct 25 02:23:41 gwy kernel: ata8.02: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 25 02:23:41 gwy kernel: ata8.03: hard resetting link
Oct 25 02:23:41 gwy kernel: ata8.03: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 25 02:23:41 gwy kernel: ata8.05: hard resetting link
Oct 25 02:23:42 gwy kernel: ata8.05: SATA link up 1.5 Gbps (SStatus 113
SControl 320)
Oct 25 02:23:42 gwy kernel: ata8.01: configured for UDMA/100
Oct 25 02:23:42 gwy kernel: ata8.02: configured for UDMA/100
Oct 25 02:23:42 gwy kernel: ata8.03: configured for UDMA/100
Oct 25 02:23:42 gwy kernel: ata8.15: exception Emask 0x10 SAct 0x0 SErr
0x0 action 0x9 t4
Oct 25 02:23:42 gwy kernel: ata8.15: irq_stat 0x00060002
Oct 25 02:23:42 gwy kernel: ata8: EH complete
Oct 25 02:23:42 gwy kernel: sd 7:1:0:0: [sdh] 1953525168 512-byte
hardware sectors: (1000GB/931GiB)
Oct 25 02:23:42 gwy kernel: sd 7:1:0:0: [sdh] Write Protect is off
Oct 25 02:23:42 gwy kernel: sd 7:1:0:0: [sdh] Mode Sense: 00 3a 00 00
Oct 25 02:23:42 gwy kernel: sd 7:1:0:0: [sdh] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA
Oct 25 02:23:42 gwy kernel: sd 7:2:0:0: [sdi] 1953525168 512-byte
hardware sectors: (1000GB/931GiB)
Oct 25 02:23:42 gwy kernel: sd 7:2:0:0: [sdi] Write Protect is off
Oct 25 02:23:42 gwy kernel: sd 7:2:0:0: [sdi] Mode Sense: 00 3a 00 00
Oct 25 02:23:42 gwy kernel: sd 7:2:0:0: [sdi] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA
Oct 25 02:23:42 gwy kernel: sd 7:3:0:0: [sdj] 1953525168 512-byte
hardware sectors: (1000GB/931GiB)
Oct 25 02:23:42 gwy kernel: sd 7:3:0:0: [sdj] Write Protect is off
Oct 25 02:23:42 gwy kernel: sd 7:3:0:0: [sdj] Mode Sense: 00 3a 00 00
Oct 25 02:23:42 gwy kernel: sd 7:3:0:0: [sdj] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA
Oct 25 02:23:42 gwy kernel: sd 7:1:0:0: [sdh] 1953525168 512-byte
hardware sectors: (1000GB/931GiB)
Oct 25 02:23:42 gwy kernel: sd 7:1:0:0: [sdh] Write Protect is off
Oct 25 02:23:42 gwy kernel: sd 7:1:0:0: [sdh] Mode Sense: 00 3a 00 00
Oct 25 02:23:42 gwy kernel: sd 7:1:0:0: [sdh] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA
Oct 25 02:23:42 gwy kernel: sd 7:2:0:0: [sdi] 1953525168 512-byte
hardware sectors: (1000GB/931GiB)
Oct 25 02:23:42 gwy kernel: sd 7:2:0:0: [sdi] Write Protect is off
Oct 25 02:23:42 gwy kernel: sd 7:2:0:0: [sdi] Mode Sense: 00 3a 00 00
Oct 25 02:23:42 gwy kernel: sd 7:2:0:0: [sdi] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA
Oct 25 02:23:42 gwy kernel: sd 7:3:0:0: [sdj] 1953525168 512-byte
hardware sectors: (1000GB/931GiB)
Oct 25 02:23:42 gwy kernel: sd 7:3:0:0: [sdj] Write Protect is off
Oct 25 02:23:42 gwy kernel: sd 7:3:0:0: [sdj] Mode Sense: 00 3a 00 00
Oct 25 02:23:42 gwy kernel: sd 7:3:0:0: [sdj] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA
Oct 25 02:23:51 gwy kernel: kjournald starting. Commit interval 5 seconds
Oct 25 02:23:51 gwy kernel: EXT3 FS on sdi1, internal journal
Oct 25 02:23:51 gwy kernel: EXT3-fs: mounted filesystem with ordered
data mode.
Oct 25 02:23:51 gwy kernel: kjournald starting. Commit interval 5 seconds
Oct 25 02:23:51 gwy kernel: EXT3 FS on sdh1, internal journal
Oct 25 02:23:51 gwy kernel: EXT3-fs: mounted filesystem with ordered
data mode.
Oct 25 02:23:51 gwy kernel: kjournald starting. Commit interval 5 seconds
Oct 25 02:23:51 gwy kernel: EXT3 FS on sdj1, internal journal
Oct 25 02:23:51 gwy kernel: EXT3-fs: mounted filesystem with ordered
data mode.
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
