Got the below oopses while trying to burn a CDRW.
libata-eh.c:3259 is -
/* make sure nr_active_links is zero after EH */
WARN_ON(ap->nr_active_links);
That's followed by few softlockups.
[ 0.000000] BIOS EBDA/lowmem at: 00096400/00096400
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-rc3 (parag@parag-desktop) (gcc
version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #4 SMP Thu Nov 6 14:11:37 EST
2008
[ 0.000000] Command line:
root=UUID=823f14ad-a071-4b20-b903-1175b0152d49 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000096400 (usable)
[ 0.000000] BIOS-e820: 0000000000096400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffc2840 (usable)
[ 0.000000] BIOS-e820: 00000000bffc2840 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000002c0000000 (usable)
[ 0.000000] DMI 2.5 present.
[ 0.000000] last_pfn = 0x2c0000 max_arch_pfn = 0x3ffffffff
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbffc2 max_arch_pfn = 0x3ffffffff
[ 0.000000] Scanning 2 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000008000 (usable)
[ 0.000000] modified: 0000000000008000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000089400 (usable)
[ 0.000000] modified: 0000000000096400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bffc2840 (usable)
[ 0.000000] modified: 00000000bffc2840 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 00000002c0000000 (usable)
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bffc2000
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bffc2000 page 4k
[ 0.000000] kernel direct mapping tables up to bffc2000 @ 10000-15000
[ 0.000000] last_map_addr: bffc2000 end: bffc2000
[ 0.000000] init_memory_mapping: 0000000100000000-00000002c0000000
[ 0.000000] 0100000000 - 02c0000000 page 2M
[ 0.000000] kernel direct mapping tables up to 2c0000000 @ 13000-1f000
[ 0.000000] last_map_addr: 2c0000000 end: 2c0000000
[ 0.000000] RAMDISK: 3796e000 - 37fef14e
[ 0.000000] ACPI: RSDP 000E9810, 0024 (r2 HPQOEM)
[ 0.000000] ACPI: XSDT BFFC52EC, 006C (r1 HPQOEM SLIC-WKS 20081015
0)
[ 0.000000] ACPI: FACP BFFC5494, 00F4 (r3 HPQOEM SEABURG 1
0)
[ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match
PM1_EVT_LEN (4)
[ 0.000000] ACPI Error (tbfadt-0471): 32/64X address mismatch in
"Gpe0Block": [0000F828] [000000000001F030], using 64X [20080926]
[ 0.000000] ACPI: DSDT BFFC5A6E, 26A4 (r1 HPQOEM DSDT 1
MSFT 100000E)
[ 0.000000] ACPI: FACS BFFC5200, 0040
[ 0.000000] ACPI: SSDT BFFC8112, 6AB8 (r1 HPQOEM PROJECT 1
MSFT 100000E)
[ 0.000000] ACPI: APIC BFFC5588, 00C8 (r1 HPQOEM SEABURG 1
0)
[ 0.000000] ACPI: ASF! BFFC5650, 006A (r32 HPQOEM SEABURG 1
0)
[ 0.000000] ACPI: MCFG BFFC5852, 003C (r1 HPQOEM SEABURG 1
0)
[ 0.000000] ACPI: SLIC BFFC588E, 0176 (r1 HPQOEM SLIC-WKS 1
0)
[ 0.000000] ACPI: HPET BFFC5A04, 0038 (r1 HPQOEM SEABURG 1
0)
[ 0.000000] ACPI: TCPA BFFC5A3C, 0032 (r1 HPQOEM SEABURG 1
0)
[ 0.000000] ACPI: DMAR BFFC56BA, 0108 (r1 HPQOEM SEABURG 1
0)
[ 0.000000] ACPI: DMI detected: Hewlett-Packard
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 02c0000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 0000683b38] TEXT DATA BSS ==>
[0000200000 - 0000683b38]
[ 0.000000] #3 [003796e000 - 0037fef14e] RAMDISK ==>
[003796e000 - 0037fef14e]
[ 0.000000] #4 [0000096400 - 0000100000] BIOS reserved ==>
[0000096400 - 0000100000]
[ 0.000000] #5 [0000010000 - 0000013000] PGTABLE ==>
[0000010000 - 0000013000]
[ 0.000000] #6 [0000013000 - 000001a000] PGTABLE ==>
[0000013000 - 000001a000]
[ 0.000000] [ffffe20000000000-ffffe200099fffff] PMD ->
[ffff880028200000-ffff880031bfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x002c0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x00000008
[ 0.000000] 0: 0x00000010 -> 0x00000089
[ 0.000000] 0: 0x00000100 -> 0x000bffc2
[ 0.000000] 0: 0x00100000 -> 0x002c0000
[ 0.000000] On node 0 totalpages: 2621246
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1273 pages reserved
[ 0.000000] DMA zone: 2635 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767994 pages, LIFO batch:31
[ 0.000000] Normal zone: 25088 pages used for memmap
[ 0.000000] Normal zone: 1809920 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0xf808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x09] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0b] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec89000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 2, version 0, address 0xfec89000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000008000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 0000000000089000 - 0000000000097000
[ 0.000000] PM: Registered nosave memory: 0000000000097000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bffc2000 - 00000000bffc3000
[ 0.000000] PM: Registered nosave memory: 00000000bffc3000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c2000000 (gap:
c0000000:20000000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 8, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 2580549
[ 0.000000] Kernel command line:
root=UUID=823f14ad-a071-4b20-b903-1175b0152d49 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2333.269 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 2097152 (order: 12,
16777216 bytes)
[ 0.004000] Inode-cache hash table entries: 1048576 (order: 11,
8388608 bytes)
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.004000] Placing software IO TLB between 0x20000000 - 0x24000000
[ 0.004000] Memory: 10223772k/11534336k available (2376k kernel
code, 1049352k absent, 260260k reserved, 1159k data, 392k init)
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated
using timer frequency.. 4666.53 BogoMIPS (lpj=9333076)
[ 0.004000] Security Framework initialized
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys devices
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] CPU0: Thermal monitoring enabled (TM2)
[ 0.004000] using mwait in idle threads.
[ 0.004000] ACPI: Core revision 20080926
[ 0.012040] Setting APIC routing to flat
[ 0.012416] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.055210] CPU0: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06
[ 0.056001] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine..
4666.86 BogoMIPS (lpj=9333736)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 2
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.141962] CPU1: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06
[ 0.141981] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.144082] Booting processor 2 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#2
[ 0.004000] Calibrating delay using timer specific routine..
4666.81 BogoMIPS (lpj=9333634)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] CPU2: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.237789] CPU2: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06
[ 0.237808] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.240132] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.004000] Initializing CPU#3
[ 0.004000] Calibrating delay using timer specific routine..
4666.84 BogoMIPS (lpj=9333682)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 6144K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 3
[ 0.004000] CPU3: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.333967] CPU3: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz stepping 06
[ 0.333985] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.336010] Brought up 4 CPUs
[ 0.336012] Total of 4 processors activated (18667.06 BogoMIPS).
[ 0.336058] CPU0 attaching sched-domain:
[ 0.336060] domain 0: span 0,2 level MC
[ 0.336061] groups: 0 2
[ 0.336064] domain 1: span 0-3 level CPU
[ 0.336066] groups: 0,2 1,3
[ 0.336070] CPU1 attaching sched-domain:
[ 0.336071] domain 0: span 1,3 level MC
[ 0.336072] groups: 1 3
[ 0.336075] domain 1: span 0-3 level CPU
[ 0.336076] groups: 1,3 0,2
[ 0.336079] CPU2 attaching sched-domain:
[ 0.336081] domain 0: span 0,2 level MC
[ 0.336082] groups: 2 0
[ 0.336084] domain 1: span 0-3 level CPU
[ 0.336086] groups: 0,2 1,3
[ 0.336089] CPU3 attaching sched-domain:
[ 0.336090] domain 0: span 1,3 level MC
[ 0.336091] groups: 3 1
[ 0.336094] domain 1: span 0-3 level CPU
[ 0.336095] groups: 1,3 0,2
[ 0.336197] net_namespace: 1400 bytes
[ 0.336197] Booting paravirtualized kernel on bare hardware
[ 0.336197] NET: Registered protocol family 16
[ 0.336197] ACPI: bus type pci registered
[ 0.336197] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.336197] PCI: MCFG area at e0000000 reserved in E820
[ 0.352646] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.352648] PCI: Using configuration type 1 for base access
[ 0.352665] ACPI: EC: Look up EC in DSDT
[ 0.359736] ACPI: Interpreter enabled
[ 0.359738] ACPI: (supports S0 S3 S4 S5)
[ 0.359753] ACPI: Using IOAPIC for interrupt routing
[ 0.364135] ACPI: No dock devices found.
[ 0.364135] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.364144] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.364144] pci 0000:00:00.0: PME# disabled
[ 0.364144] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.364144] pci 0000:00:01.0: PME# disabled
[ 0.364144] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.364144] pci 0000:00:05.0: PME# disabled
[ 0.364154] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.364156] pci 0000:00:09.0: PME# disabled
[ 0.364405] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf3200000-0xf3203fff]
[ 0.364429] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.364433] pci 0000:00:1b.0: PME# disabled
[ 0.364472] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.364475] pci 0000:00:1c.0: PME# disabled
[ 0.364518] pci 0000:00:1d.0: reg 20 io port: [0x3000-0x301f]
[ 0.364558] pci 0000:00:1d.1: reg 20 io port: [0x3020-0x303f]
[ 0.364599] pci 0000:00:1d.2: reg 20 io port: [0x3040-0x305f]
[ 0.364639] pci 0000:00:1d.3: reg 20 io port: [0x3060-0x307f]
[ 0.364684] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf3204000-0xf32043ff]
[ 0.364717] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.364721] pci 0000:00:1d.7: PME# disabled
[ 0.364834] pci 0000:00:1f.2: reg 10 io port: [0x30c0-0x30c7]
[ 0.364839] pci 0000:00:1f.2: reg 14 io port: [0x30d0-0x30d3]
[ 0.364844] pci 0000:00:1f.2: reg 18 io port: [0x30c8-0x30cf]
[ 0.364848] pci 0000:00:1f.2: reg 1c io port: [0x30d4-0x30d7]
[ 0.364853] pci 0000:00:1f.2: reg 20 io port: [0x3080-0x309f]
[ 0.364858] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf3204400-0xf32047ff]
[ 0.364868] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.364871] pci 0000:00:1f.2: PME# disabled
[ 0.364905] pci 0000:80:00.0: reg 10 32bit mmio: [0xf2000000-0xf2ffffff]
[ 0.364913] pci 0000:80:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.364920] pci 0000:80:00.0: reg 1c 64bit mmio: [0xf0000000-0xf1ffffff]
[ 0.364925] pci 0000:80:00.0: reg 24 io port: [0x1000-0x107f]
[ 0.364930] pci 0000:80:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.365043] pci 0000:00:01.0: bridge io port: [0x1000-0x1fff]
[ 0.365046] pci 0000:00:01.0: bridge 32bit mmio: [0xf0000000-0xf2ffffff]
[ 0.365050] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.365075] pci 0000:60:00.0: reg 10 64bit mmio: [0xc0000000-0xcfffffff]
[ 0.365083] pci 0000:60:00.0: reg 18 64bit mmio: [0xf3000000-0xf300ffff]
[ 0.365088] pci 0000:60:00.0: reg 20 io port: [0x2000-0x20ff]
[ 0.365095] pci 0000:60:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.365102] pci 0000:60:00.0: supports D1 D2
[ 0.365128] pci 0000:60:00.1: reg 10 64bit mmio: [0xf3010000-0xf301ffff]
[ 0.365150] pci 0000:60:00.1: supports D1 D2
[ 0.365165] pci 0000:60:00.0: disabling ASPM on pre-1.1 PCIe
device. You can enable it with 'pcie_aspm=force'
[ 0.365193] pci 0000:00:05.0: bridge io port: [0x2000-0x2fff]
[ 0.365196] pci 0000:00:05.0: bridge 32bit mmio: [0xf3000000-0xf30fffff]
[ 0.365200] pci 0000:00:05.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.368274] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
[ 0.368365] pci 0000:10:00.0: PME# disabled
[ 0.369555] pci 0000:10:00.3: PME# supported from D0 D3hot D3cold
[ 0.369600] pci 0000:10:00.3: PME# disabled
[ 0.370102] pci 0000:10:00.0: disabling ASPM on pre-1.1 PCIe
device. You can enable it with 'pcie_aspm=force'
[ 0.370132] pci 0000:00:09.0: bridge 32bit mmio: [0xf3300000-0xf33fffff]
[ 0.371702] pci 0000:1e:00.0: PME# supported from D0 D3hot D3cold
[ 0.371794] pci 0000:1e:00.0: PME# disabled
[ 0.373738] pci 0000:1e:01.0: PME# supported from D0 D3hot D3cold
[ 0.373829] pci 0000:1e:01.0: PME# disabled
[ 0.380426] pci 0000:0e:00.0: reg 10 64bit mmio: [0xf3100000-0xf310ffff]
[ 0.380466] pci 0000:0e:00.0: PME# supported from D3hot D3cold
[ 0.380470] pci 0000:0e:00.0: PME# disabled
[ 0.380710] pci 0000:00:1c.0: bridge 32bit mmio: [0xf3100000-0xf31fffff]
[ 0.380755] pci 0000:00:1e.0: transparent bridge
[ 0.380778] bus 00 -> node 0
[ 0.380784] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.381338] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MCH1._PRT]
[ 0.381470] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MCH5._PRT]
[ 0.381603] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MCH9.MUPP._PRT]
[ 0.381791] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.MCH9.MUPP.PTE1._PRT]
[ 0.381921] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.MCH9.MUPP.PTE2._PRT]
[ 0.382052] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
[ 0.382186] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[ 0.400813] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 14 15)
[ 0.400813] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.404022] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15)
[ 0.404129] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.404235] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11
14 15) *0, disabled.
[ 0.404342] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 14 15)
[ 0.404449] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.404556] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11
14 15) *0, disabled.
[ 0.404614] usbcore: registered new interface driver usbfs
[ 0.404614] usbcore: registered new interface driver hub
[ 0.404614] usbcore: registered new device driver usb
[ 0.404614] PCI: Using ACPI for IRQ routing
[ 0.420026] PCI-GART: No AMD GART found.
[ 0.420037] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.420041] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.428128] ACPI Error (dsfield-0139): [CAPD] Namespace lookup
failure, AE_ALREADY_EXISTS
[ 0.428133] ACPI Error (psparse-0524): Method parse/execution
failed [\_SB_.PCI0._OSC] (Node ffff8802bf85a490), AE_ALREADY_EXISTS
[ 0.428138] ACPI: Marking method _OSC as Serialized because of
AE_ALREADY_EXISTS error
[ 0.440009] pnp: PnP ACPI init
[ 0.440017] ACPI: bus type pnp registered
[ 0.442831] pnp: PnP ACPI: found 17 devices
[ 0.442833] ACPI: ACPI bus type pnp unregistered
[ 0.442846] system 00:0c: ioport range 0x4d0-0x4d1 has been reserved
[ 0.442853] system 00:0d: ioport range 0x400-0x41f has been reserved
[ 0.442857] system 00:0d: ioport range 0x420-0x43f has been reserved
[ 0.442859] system 00:0d: ioport range 0x440-0x45f has been reserved
[ 0.442861] system 00:0d: ioport range 0x460-0x47f has been reserved
[ 0.442864] system 00:0d: ioport range 0x480-0x48f has been reserved
[ 0.442866] system 00:0d: ioport range 0x490-0x49f has been reserved
[ 0.442869] system 00:0d: ioport range 0xf800-0xf81f has been reserved
[ 0.442871] system 00:0d: ioport range 0xf820-0xf83f has been reserved
[ 0.442873] system 00:0d: ioport range 0xf840-0xf85f has been reserved
[ 0.442876] system 00:0d: ioport range 0xf860-0xf87f has been reserved
[ 0.442878] system 00:0d: ioport range 0xfa00-0xfa3f has been reserved
[ 0.442881] system 00:0d: ioport range 0xfc00-0xfc7f has been reserved
[ 0.442883] system 00:0d: ioport range 0xfc80-0xfcff has been reserved
[ 0.442885] system 00:0d: ioport range 0xfe00-0xfe7f has been reserved
[ 0.442888] system 00:0d: ioport range 0xfe80-0xfeff has been reserved
[ 0.442893] system 00:0e: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.442896] system 00:0e: iomem range 0xffe00000-0xffffffff has been reserved
[ 0.442898] system 00:0e: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.442901] system 00:0e: iomem range 0xfe700000-0xfe7003ff has been reserved
[ 0.442903] system 00:0e: iomem range 0xfe600000-0xfe6fffff has been reserved
[ 0.442906] system 00:0e: iomem range 0xfe000000-0xfe01ffff has been reserved
[ 0.442911] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 0.442919] system 00:0f: iomem range 0xc0000-0xe7fff has been reserved
[ 0.442921] system 00:0f: iomem range 0xe8000-0xeffff could not be reserved
[ 0.442923] system 00:0f: iomem range 0xf0000-0xfffff could not be reserved
[ 0.442925] system 00:0f: iomem range 0x100000-0xbfffffff could not
be reserved
[ 0.442928] system 00:0f: iomem range 0xfeda0000-0xfedbffff has been reserved
[ 0.442932] system 00:10: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.448275] pci 0000:80:00.0: BAR 6: can't allocate mem resource
[0xe0000000-0xdfffffff]
[ 0.448311] pci 0000:00:01.0: PCI bridge, secondary bus 0000:80
[ 0.448313] pci 0000:00:01.0: IO window: 0x1000-0x1fff
[ 0.448316] pci 0000:00:01.0: MEM window: 0xf0000000-0xf2ffffff
[ 0.448319] pci 0000:00:01.0: PREFETCH window:
0x000000d0000000-0x000000dfffffff
[ 0.448324] pci 0000:00:05.0: PCI bridge, secondary bus 0000:60
[ 0.448326] pci 0000:00:05.0: IO window: 0x2000-0x2fff
[ 0.448329] pci 0000:00:05.0: MEM window: 0xf3000000-0xf30fffff
[ 0.448332] pci 0000:00:05.0: PREFETCH window:
0x000000c0000000-0x000000cfffffff
[ 0.448336] pci 0000:1e:00.0: PCI bridge, secondary bus 0000:20
[ 0.448338] pci 0000:1e:00.0: IO window: disabled
[ 0.448447] pci 0000:1e:00.0: MEM window: disabled
[ 0.448539] pci 0000:1e:00.0: PREFETCH window: disabled
[ 0.448722] pci 0000:1e:01.0: PCI bridge, secondary bus 0000:40
[ 0.448723] pci 0000:1e:01.0: IO window: disabled
[ 0.448859] pci 0000:1e:01.0: MEM window: disabled
[ 0.448950] pci 0000:1e:01.0: PREFETCH window: disabled
[ 0.449133] pci 0000:10:00.0: PCI bridge, secondary bus 0000:1e
[ 0.449134] pci 0000:10:00.0: IO window: disabled
[ 0.449270] pci 0000:10:00.0: MEM window: disabled
[ 0.449362] pci 0000:10:00.0: PREFETCH window: disabled
[ 0.449545] pci 0000:10:00.3: PCI bridge, secondary bus 0000:11
[ 0.449546] pci 0000:10:00.3: IO window: disabled
[ 0.449636] pci 0000:10:00.3: MEM window: disabled
[ 0.449682] pci 0000:10:00.3: PREFETCH window: disabled
[ 0.449774] pci 0000:00:09.0: PCI bridge, secondary bus 0000:10
[ 0.449775] pci 0000:00:09.0: IO window: disabled
[ 0.449778] pci 0000:00:09.0: MEM window: 0xf3300000-0xf33fffff
[ 0.449781] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.449785] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0e
[ 0.449786] pci 0000:00:1c.0: IO window: disabled
[ 0.449790] pci 0000:00:1c.0: MEM window: 0xf3100000-0xf31fffff
[ 0.449793] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.449798] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.449799] pci 0000:00:1e.0: IO window: disabled
[ 0.449803] pci 0000:00:1e.0: MEM window: disabled
[ 0.449806] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.449818] pci 0000:00:01.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 0.449821] pci 0000:00:01.0: setting latency timer to 64
[ 0.449827] pci 0000:00:05.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[ 0.449830] pci 0000:00:05.0: setting latency timer to 64
[ 0.449836] pci 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 0.449839] pci 0000:00:09.0: setting latency timer to 64
[ 0.449957] pci 0000:10:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 0.450047] pci 0000:10:00.0: setting latency timer to 64
[ 0.450231] pci 0000:1e:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 0.450322] pci 0000:1e:00.0: setting latency timer to 64
[ 0.450507] pci 0000:1e:01.0: PCI INT A -> GSI 46 (level, low) -> IRQ 46
[ 0.450596] pci 0000:1e:01.0: setting latency timer to 64
[ 0.450779] pci 0000:10:00.3: setting latency timer to 64
[ 0.450828] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.450832] pci 0000:00:1c.0: setting latency timer to 64
[ 0.450837] pci 0000:00:1e.0: setting latency timer to 64
[ 0.450839] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.450841] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 0.450843] bus: 80 index 0 io port: [0x1000-0x1fff]
[ 0.450845] bus: 80 index 1 mmio: [0xf0000000-0xf2ffffff]
[ 0.450846] bus: 80 index 2 mmio: [0xd0000000-0xdfffffff]
[ 0.450848] bus: 80 index 3 mmio: [0x0-0x0]
[ 0.450849] bus: 60 index 0 io port: [0x2000-0x2fff]
[ 0.450851] bus: 60 index 1 mmio: [0xf3000000-0xf30fffff]
[ 0.450852] bus: 60 index 2 mmio: [0xc0000000-0xcfffffff]
[ 0.450854] bus: 60 index 3 mmio: [0x0-0x0]
[ 0.450855] bus: 10 index 0 mmio: [0x0-0x0]
[ 0.450857] bus: 10 index 1 mmio: [0xf3300000-0xf33fffff]
[ 0.450858] bus: 10 index 2 mmio: [0x0-0x0]
[ 0.450859] bus: 10 index 3 mmio: [0x0-0x0]
[ 0.450861] bus: 1e index 0 mmio: [0x0-0x0]
[ 0.450862] bus: 1e index 1 mmio: [0x0-0x0]
[ 0.450863] bus: 1e index 2 mmio: [0x0-0x0]
[ 0.450865] bus: 1e index 3 mmio: [0x0-0x0]
[ 0.450866] bus: 20 index 0 mmio: [0x0-0x0]
[ 0.450867] bus: 20 index 1 mmio: [0x0-0x0]
[ 0.450869] bus: 20 index 2 mmio: [0x0-0x0]
[ 0.450870] bus: 20 index 3 mmio: [0x0-0x0]
[ 0.450871] bus: 40 index 0 mmio: [0x0-0x0]
[ 0.450872] bus: 40 index 1 mmio: [0x0-0x0]
[ 0.450874] bus: 40 index 2 mmio: [0x0-0x0]
[ 0.450875] bus: 40 index 3 mmio: [0x0-0x0]
[ 0.450876] bus: 11 index 0 mmio: [0x0-0x0]
[ 0.450878] bus: 11 index 1 mmio: [0x0-0x0]
[ 0.450879] bus: 11 index 2 mmio: [0x0-0x0]
[ 0.450880] bus: 11 index 3 mmio: [0x0-0x0]
[ 0.450882] bus: 0e index 0 mmio: [0x0-0x0]
[ 0.450883] bus: 0e index 1 mmio: [0xf3100000-0xf31fffff]
[ 0.450884] bus: 0e index 2 mmio: [0x0-0x0]
[ 0.450886] bus: 0e index 3 mmio: [0x0-0x0]
[ 0.450887] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.450888] bus: 01 index 1 mmio: [0x0-0x0]
[ 0.450890] bus: 01 index 2 mmio: [0x0-0x0]
[ 0.450891] bus: 01 index 3 io port: [0x00-0xffff]
[ 0.450893] bus: 01 index 4 mmio: [0x000000-0xffffffffffffffff]
[ 0.450926] NET: Registered protocol family 2
[ 0.488102] IP route cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.488947] TCP established hash table entries: 262144 (order: 10,
4194304 bytes)
[ 0.490740] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.491217] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.491220] TCP reno registered
[ 0.501844] Switched to high resolution mode on CPU 2
[ 0.501990] Switched to high resolution mode on CPU 1
[ 0.501992] Switched to high resolution mode on CPU 3
[ 0.504016] Switched to high resolution mode on CPU 0
[ 0.508151] NET: Registered protocol family 1
[ 0.508247] checking if image is initramfs... it is
[ 0.979892] Freeing initrd memory: 6660k freed
[ 0.983207] audit: initializing netlink socket (disabled)
[ 0.983227] type=2000 audit(1226170317.980:1): initialized
[ 0.984115] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.984339] VFS: Disk quotas dquot_6.5.1
[ 0.984372] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.984480] msgmni has been set to 19983
[ 0.984619] alg: No test for stdrng (krng)
[ 0.984677] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[ 0.984680] io scheduler noop registered
[ 0.984681] io scheduler anticipatory registered
[ 0.984683] io scheduler deadline registered (default)
[ 0.984701] io scheduler cfq registered
[ 0.984832] pci 0000:60:00.0: Boot video device
[ 0.984984] ACPI Error (dsfield-0139): [CAPD] Namespace lookup
failure, AE_ALREADY_EXISTS
[ 0.984991] ACPI Error (psparse-0524): Method parse/execution
failed [\_SB_.PCI0._OSC] (Node ffff8802bf85a490), AE_ALREADY_EXISTS
[ 0.985865] ACPI Error (dsfield-0139): [CAPD] Namespace lookup
failure, AE_ALREADY_EXISTS
[ 0.985870] ACPI Error (psparse-0524): Method parse/execution
failed [\_SB_.PCI0._OSC] (Node ffff8802bf85a490), AE_ALREADY_EXISTS
[ 0.986752] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.986780] pcieport-driver 0000:00:01.0: found MSI capability
[ 0.986799] pcieport-driver 0000:00:01.0: irq 95 for MSI/MSI-X
[ 0.986807] pci_express 0000:00:01.0:pcie00: allocate port service
[ 0.986845] pci_express 0000:00:01.0:pcie01: allocate port service
[ 0.986919] pcieport-driver 0000:00:05.0: setting latency timer to 64
[ 0.986946] pcieport-driver 0000:00:05.0: found MSI capability
[ 0.986961] pcieport-driver 0000:00:05.0: irq 94 for MSI/MSI-X
[ 0.986969] pci_express 0000:00:05.0:pcie00: allocate port service
[ 0.987004] pci_express 0000:00:05.0:pcie01: allocate port service
[ 0.987076] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 0.987103] pcieport-driver 0000:00:09.0: found MSI capability
[ 0.987118] pcieport-driver 0000:00:09.0: irq 93 for MSI/MSI-X
[ 0.987126] pci_express 0000:00:09.0:pcie00: allocate port service
[ 0.987161] pci_express 0000:00:09.0:pcie01: allocate port service
[ 0.987234] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.987263] pcieport-driver 0000:00:1c.0: found MSI capability
[ 0.987284] pcieport-driver 0000:00:1c.0: irq 92 for MSI/MSI-X
[ 0.987295] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 0.987330] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 0.987632] pcieport-driver 0000:10:00.0: setting latency timer to 64
[ 0.989006] pci_express 0000:10:00.0:pcie11: allocate port service
[ 0.991155] pcieport-driver 0000:1e:00.0: setting latency timer to 64
[ 0.992480] pcieport-driver 0000:1e:00.0: found MSI capability
[ 0.993448] pcieport-driver 0000:1e:00.0: irq 91 for MSI/MSI-X
[ 0.993859] pci_express 0000:1e:00.0:pcie21: allocate port service
[ 0.995873] pcieport-driver 0000:1e:01.0: setting latency timer to 64
[ 0.997204] pcieport-driver 0000:1e:01.0: found MSI capability
[ 0.998164] pcieport-driver 0000:1e:01.0: irq 90 for MSI/MSI-X
[ 0.998575] pci_express 0000:1e:01.0:pcie21: allocate port service
[ 1.000467] ACPI Error (dsfield-0139): [CAPD] Namespace lookup
failure, AE_ALREADY_EXISTS
[ 1.000473] ACPI Error (psparse-0524): Method parse/execution
failed [\_SB_.PCI0._OSC] (Node ffff8802bf85a490), AE_ALREADY_EXISTS
[ 1.001335] ACPI Error (dsfield-0139): [CAPD] Namespace lookup
failure, AE_ALREADY_EXISTS
[ 1.001341] ACPI Error (psparse-0524): Method parse/execution
failed [\_SB_.PCI0._OSC] (Node ffff8802bf85a490), AE_ALREADY_EXISTS
[ 1.001370] aer 0000:00:01.0:pcie01: AER service couldn't init
device: _OSC failed
[ 1.001464] ACPI Error (dsfield-0139): [CAPD] Namespace lookup
failure, AE_ALREADY_EXISTS
[ 1.001469] ACPI Error (psparse-0524): Method parse/execution
failed [\_SB_.PCI0._OSC] (Node ffff8802bf85a490), AE_ALREADY_EXISTS
[ 1.002318] ACPI Error (dsfield-0139): [CAPD] Namespace lookup
failure, AE_ALREADY_EXISTS
[ 1.002323] ACPI Error (psparse-0524): Method parse/execution
failed [\_SB_.PCI0._OSC] (Node ffff8802bf85a490), AE_ALREADY_EXISTS
[ 1.002352] aer 0000:00:05.0:pcie01: AER service couldn't init
device: _OSC failed
[ 1.002445] ACPI Error (dsfield-0139): [CAPD] Namespace lookup
failure, AE_ALREADY_EXISTS
[ 1.002450] ACPI Error (psparse-0524): Method parse/execution
failed [\_SB_.PCI0._OSC] (Node ffff8802bf85a490), AE_ALREADY_EXISTS
[ 1.003299] ACPI Error (dsfield-0139): [CAPD] Namespace lookup
failure, AE_ALREADY_EXISTS
[ 1.003304] ACPI Error (psparse-0524): Method parse/execution
failed [\_SB_.PCI0._OSC] (Node ffff8802bf85a490), AE_ALREADY_EXISTS
[ 1.003333] aer 0000:00:09.0:pcie01: AER service couldn't init
device: _OSC failed
[ 1.006548] Linux agpgart interface v0.103
[ 1.006551] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.006679] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.007150] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.008956] brd: module loaded
[ 1.009151] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at
0x60,0x64 irq 1,12
[ 1.011878] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.011882] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.012006] mice: PS/2 mouse device common for all mice
[ 1.012071] rtc_cmos 00:04: RTC can wake from S4
[ 1.012135] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.012158] rtc0: alarms up to one month, y3k, 114 bytes nvram, ,
hpet irqs irqs
[ 1.012198] cpuidle: using governor ladder
[ 1.012200] cpuidle: using governor menu
[ 1.012207] No iBFT detected.
[ 1.012498] TCP cubic registered
[ 1.012501] NET: Registered protocol family 17
[ 1.012650] registered taskstats version 1
[ 1.012824] rtc_cmos 00:04: setting system clock to 2008-11-08
18:51:58 UTC (1226170318)
[ 1.012858] Freeing unused kernel memory: 392k freed
[ 1.079370] fuse init (API version 7.10)
[ 1.088614] ACPI: SSDT BFFD07F4, 08C4 (r1 HPQOEM CPU_TM2 1
MSFT 100000E)
[ 1.089070] processor ACPI0007:00: registered as cooling_device0
[ 1.089075] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.089362] processor ACPI0007:01: registered as cooling_device1
[ 1.089366] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.089630] processor ACPI0007:02: registered as cooling_device2
[ 1.089635] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 1.089874] processor ACPI0007:03: registered as cooling_device3
[ 1.089878] ACPI: Processor [CPU3] (supports 8 throttling states)
[ 1.248362] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.248413] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.248422] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.248425] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.248510] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 1
[ 1.248550] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003000
[ 1.248642] usb usb1: configuration #1 chosen from 1 choice
[ 1.248671] hub 1-0:1.0: USB hub found
[ 1.248678] hub 1-0:1.0: 2 ports detected
[ 1.248805] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.248807] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.248809] usb usb1: Product: UHCI Host Controller
[ 1.248811] usb usb1: Manufacturer: Linux 2.6.28-rc3 uhci_hcd
[ 1.248812] usb usb1: SerialNumber: 0000:00:1d.0
[ 1.248835] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.248840] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.248843] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.248880] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 2
[ 1.248908] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003020
[ 1.248972] usb usb2: configuration #1 chosen from 1 choice
[ 1.248995] hub 2-0:1.0: USB hub found
[ 1.249001] hub 2-0:1.0: 2 ports detected
[ 1.249069] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.249072] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.249074] usb usb2: Product: UHCI Host Controller
[ 1.249075] usb usb2: Manufacturer: Linux 2.6.28-rc3 uhci_hcd
[ 1.249077] usb usb2: SerialNumber: 0000:00:1d.1
[ 1.249095] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.249100] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.249103] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.249141] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 3
[ 1.249167] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
[ 1.249232] usb usb3: configuration #1 chosen from 1 choice
[ 1.249256] hub 3-0:1.0: USB hub found
[ 1.249261] hub 3-0:1.0: 2 ports detected
[ 1.249330] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.249332] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.249334] usb usb3: Product: UHCI Host Controller
[ 1.249336] usb usb3: Manufacturer: Linux 2.6.28-rc3 uhci_hcd
[ 1.249338] usb usb3: SerialNumber: 0000:00:1d.2
[ 1.249356] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[ 1.249362] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.249364] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.249404] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 4
[ 1.249432] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00003060
[ 1.249496] usb usb4: configuration #1 chosen from 1 choice
[ 1.249520] hub 4-0:1.0: USB hub found
[ 1.249525] hub 4-0:1.0: 2 ports detected
[ 1.249595] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.249597] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.249599] usb usb4: Product: UHCI Host Controller
[ 1.249600] usb usb4: Manufacturer: Linux 2.6.28-rc3 uhci_hcd
[ 1.249602] usb usb4: SerialNumber: 0000:00:1d.3
[ 1.262695] tg3.c:v3.94 (August 14, 2008)
[ 1.262710] tg3 0000:0e:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.262718] tg3 0000:0e:00.0: setting latency timer to 64
[ 1.264006] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.264008] Warning! ehci_hcd should always be loaded before
uhci_hcd and ohci_hcd, not after
[ 1.264044] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.264068] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.264071] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.264140] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 5
[ 1.268057] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.268062] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.268069] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xf3204000
[ 1.280152] eth0: Tigon3 [partno(BCM95755) rev a002 PHY(5755)] (PCI
Express) 10/100/1000Base-T Ethernet 00:1f:29:00:ee:67
[ 1.280157] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0]
WireSpeed[1] TSOcap[1]
[ 1.280159] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.280992] SCSI subsystem initialized
[ 1.284016] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.284087] usb usb5: configuration #1 chosen from 1 choice
[ 1.284112] hub 5-0:1.0: USB hub found
[ 1.284118] hub 5-0:1.0: 8 ports detected
[ 1.284207] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.284209] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.284210] usb usb5: Product: EHCI Host Controller
[ 1.284212] usb usb5: Manufacturer: Linux 2.6.28-rc3 ehci_hcd
[ 1.284213] usb usb5: SerialNumber: 0000:00:1d.7
[ 1.290195] libata version 3.00 loaded.
[ 1.292283] ahci 0000:00:1f.2: version 3.0
[ 1.292295] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.292385] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3
Gbps 0x3f impl RAID mode
[ 1.292388] ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part
[ 1.292391] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.308297] scsi0 : ahci
[ 1.308499] scsi1 : ahci
[ 1.308619] scsi2 : ahci
[ 1.308742] scsi3 : ahci
[ 1.308855] scsi4 : ahci
[ 1.308968] scsi5 : ahci
[ 1.308999] ata1: SATA max UDMA/133 abar m1024@0xf3204400 port
0xf3204500 irq 19
[ 1.309002] ata2: SATA max UDMA/133 irq_stat 0x00000040, connection
status changed
[ 1.309004] ata3: SATA max UDMA/133 irq_stat 0x00400040, connection
status changed
[ 1.309006] ata4: SATA max UDMA/133 irq_stat 0x00400040, connection
status changed
[ 1.309009] ata5: SATA max UDMA/133 abar m1024@0xf3204400 port
0xf3204700 irq 19
[ 1.309011] ata6: SATA max UDMA/133 abar m1024@0xf3204400 port
0xf3204780 irq 19
[ 1.632265] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.637548] ata1.00: ATA-7: SAMSUNG HD161HJ, JF100-23, max UDMA/100
[ 1.637551] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.642906] ata1.00: configured for UDMA/100
[ 1.648759] usb 5-3: new high speed USB device using ehci_hcd and address 3
[ 1.780472] usb 5-3: configuration #1 chosen from 1 choice
[ 1.780684] hub 5-3:1.0: USB hub found
[ 1.780775] hub 5-3:1.0: 3 ports detected
[ 1.781594] usb 5-3: New USB device found, idVendor=05ac, idProduct=9121
[ 1.781596] usb 5-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.244008] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 2.380017] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.382535] ata2.00: ATAPI: ATAPI DVD A DH16A3L, 8H3D, max UDMA/100
[ 2.385556] ata2.00: configured for UDMA/100
[ 2.425733] usb 1-1: configuration #1 chosen from 1 choice
[ 2.428811] usb 1-1: New USB device found, idVendor=045e, idProduct=00db
[ 2.428813] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.428815] usb 1-1: Product: Natural(R) Ergonomic Keyboard 4000
[ 2.428816] usb 1-1: Manufacturer: Microsoft
[ 2.437315] usbcore: registered new interface driver hiddev
[ 2.437376] usbcore: registered new interface driver usbhid
[ 2.437378] usbhid: v2.6:USB HID core driver
[ 2.672009] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 2.846361] usb 3-2: configuration #1 chosen from 1 choice
[ 2.850531] usb 3-2: New USB device found, idVendor=0a12, idProduct=0001
[ 2.850533] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.936107] usb 5-3.2: new low speed USB device using ehci_hcd and address 6
[ 3.054654] usb 5-3.2: configuration #1 chosen from 1 choice
[ 3.070413] generic-usb 0003:05AC:921D.0003: hiddev96,hidraw0: USB
HID v1.11 Device [Apple Cinema Display] on usb-0000:00:1d.7-3.2/input0
[ 3.070482] usb 5-3.2: New USB device found, idVendor=05ac, idProduct=921d
[ 3.070484] usb 5-3.2: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 3.070485] usb 5-3.2: Product: Apple Cinema Display
[ 3.124019] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.156121] usb 5-3.3: new high speed USB device using ehci_hcd and address 7
[ 3.167452] ata3.00: ATA-7: ST3300620AS, 3.AAC, max UDMA/133
[ 3.167455] ata3.00: 586072368 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.225767] ata3.00: configured for UDMA/133
[ 3.268677] usb 5-3.3: configuration #1 chosen from 1 choice
[ 3.274499] usb 5-3.3: New USB device found, idVendor=0bc2, idProduct=3000
[ 3.274501] usb 5-3.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 3.274503] usb 5-3.3: Product: FreeAgentDesktop
[ 3.274505] usb 5-3.3: Manufacturer: Seagate
[ 3.274506] usb 5-3.3: SerialNumber: 5QM0G4AQ
[ 3.279352] Initializing USB Mass Storage driver...
[ 3.279619] scsi6 : SCSI emulation for USB Mass Storage devices
[ 3.279782] usb-storage: device found at 7
[ 3.279784] usb-storage: waiting for device to settle before scanning
[ 3.279792] usbcore: registered new interface driver usb-storage
[ 3.279795] USB Mass Storage support registered.
[ 3.512007] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 3.694670] usb 4-1: configuration #1 chosen from 1 choice
[ 3.702832] input: Logitech USB Receiver as /class/input/input0
[ 3.720799] generic-usb 0003:046D:C525.0004: input,hidraw1: USB HID
v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-1/input0
[ 3.726714] input: Logitech USB Receiver as /class/input/input1
[ 3.744069] generic-usb 0003:046D:C525.0005:
input,hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver]
on usb-0000:00:1d.3-1/input1
[ 3.744147] usb 4-1: New USB device found, idVendor=046d, idProduct=c525
[ 3.744148] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.744150] usb 4-1: Product: USB Receiver
[ 3.744152] usb 4-1: Manufacturer: Logitech
[ 3.964016] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.965676] ata4.00: ATA-8: WDC WD3200BEKT-00F3T0, 11.01A11, max UDMA/133
[ 3.965679] ata4.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.967402] ata4.00: configured for UDMA/133
[ 4.300012] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.636763] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.652102] scsi 0:0:0:0: Direct-Access ATA SAMSUNG
HD161HJ JF10 PQ: 0 ANSI: 5
[ 4.653233] scsi 1:0:0:0: CD-ROM ATAPI DVD A DH16A3L
8H3D PQ: 0 ANSI: 5
[ 4.653340] scsi 2:0:0:0: Direct-Access ATA ST3300620AS
3.AA PQ: 0 ANSI: 5
[ 4.653433] scsi 3:0:0:0: Direct-Access ATA WDC
WD3200BEKT-0 11.0 PQ: 0 ANSI: 5
[ 4.658759] Driver 'sr' needs updating - please use bus_type methods
[ 4.660738] Driver 'sd' needs updating - please use bus_type methods
[ 4.660796] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors:
(160 GB/149 GiB)
[ 4.660808] sd 0:0:0:0: [sda] Write Protect is off
[ 4.660810] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.660827] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.660875] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors:
(160 GB/149 GiB)
[ 4.660886] sd 0:0:0:0: [sda] Write Protect is off
[ 4.660887] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.660904] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.660908] sda:sr0: scsi3-mmc drive: 4x/40x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 4.663854] Uniform CD-ROM driver Revision: 3.20
[ 4.663920] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.667310] sda1
[ 4.667383] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.667439] sd 2:0:0:0: [sdb] 586072368 512-byte hardware sectors:
(300 GB/279 GiB)
[ 4.667450] sd 2:0:0:0: [sdb] Write Protect is off
[ 4.667452] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.667470] sd 2:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.667501] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.667527] sd 2:0:0:0: [sdb] 586072368 512-byte hardware sectors:
(300 GB/279 GiB)
[ 4.667531] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.667539] sd 2:0:0:0: [sdb] Write Protect is off
[ 4.667541] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.667559] sd 2:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.667561] sdb:<5>sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 4.667585] scsi 3:0:0:0: Attached scsi generic sg3 type 0
[ 4.681474] sdb1 sdb2 < sdb5 >
[ 4.698143] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 4.698873] sd 3:0:0:0: [sdc] 625142448 512-byte hardware sectors:
(320 GB/298 GiB)
[ 4.698889] sd 3:0:0:0: [sdc] Write Protect is off
[ 4.698891] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 4.698912] sd 3:0:0:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.698957] sd 3:0:0:0: [sdc] 625142448 512-byte hardware sectors:
(320 GB/298 GiB)
[ 4.698969] sd 3:0:0:0: [sdc] Write Protect is off
[ 4.698971] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 4.699102] sd 3:0:0:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.699105] sdc: sdc1
[ 4.729683] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 5.795744] sr 1:0:0:0: [sr0] Device not ready: Sense Key : Not
Ready [current]
[ 5.795749] sr 1:0:0:0: [sr0] Device not ready: Add. Sense: Medium
not present
[ 5.795755] end_request: I/O error, dev sr0, sector 0
[ 5.795758] Buffer I/O error on device sr0, logical block 0
[ 5.795761] Buffer I/O error on device sr0, logical block 1
[ 5.795766] Buffer I/O error on device sr0, logical block 2
[ 5.795768] Buffer I/O error on device sr0, logical block 3
[ 5.795770] Buffer I/O error on device sr0, logical block 4
[ 5.795772] Buffer I/O error on device sr0, logical block 5
[ 5.795774] Buffer I/O error on device sr0, logical block 6
[ 5.795777] Buffer I/O error on device sr0, logical block 7
[ 6.789156] sr 1:0:0:0: [sr0] Device not ready: Sense Key : Not
Ready [current]
[ 6.789161] sr 1:0:0:0: [sr0] Device not ready: Add. Sense: Medium
not present
[ 6.789166] end_request: I/O error, dev sr0, sector 0
[ 6.789170] Buffer I/O error on device sr0, logical block 0
[ 6.789173] Buffer I/O error on device sr0, logical block 1
[ 6.833355] PM: Starting manual resume from disk
[ 6.873269] kjournald starting. Commit interval 5 seconds
[ 6.873289] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.277501] usb-storage: device scan complete
[ 8.278961] scsi 6:0:0:0: Direct-Access Seagate
FreeAgentDesktop 100F PQ: 0 ANSI: 4
[ 8.281448] sd 6:0:0:0: [sdd] 976773168 512-byte hardware sectors:
(500 GB/465 GiB)
[ 8.282946] sd 6:0:0:0: [sdd] Write Protect is off
[ 8.282948] sd 6:0:0:0: [sdd] Mode Sense: 1c 00 00 00
[ 8.282950] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 8.284944] sd 6:0:0:0: [sdd] 976773168 512-byte hardware sectors:
(500 GB/465 GiB)
[ 8.286319] sd 6:0:0:0: [sdd] Write Protect is off
[ 8.286321] sd 6:0:0:0: [sdd] Mode Sense: 1c 00 00 00
[ 8.286323] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 8.286326] sdd: sdd1
[ 8.296408] sd 6:0:0:0: [sdd] Attached SCSI disk
[ 8.296478] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 11.837114] udevd version 124 started
[ 12.376558] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.390400] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.406750] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 12.406891] iTCO_wdt: Found a 631xESB/632xESB TCO device
(Version=2, TCOBASE=0xf860)
[ 12.406948] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.421725] input: Power Button (FF) as /class/input/input2
[ 12.429991] ACPI: WMI: Mapper loaded
[ 12.451491] input: PC Speaker as /class/input/input3
[ 12.456070] ACPI: Power Button (FF) [PWRF]
[ 12.456139] input: Power Button (CM) as /class/input/input4
[ 12.463852] intel_rng: Firmware space is locked read-only. If you can't or
[ 12.463854] intel_rng: don't want to disable this in firmware setup, and if
[ 12.463855] intel_rng: you are certain that your system has a functional
[ 12.463856] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 12.488059] ACPI: Power Button (CM) [PBTN]
[ 12.753883] Bluetooth: Core ver 2.13
[ 12.754064] NET: Registered protocol family 31
[ 12.754066] Bluetooth: HCI device and connection manager initialized
[ 12.754069] Bluetooth: HCI socket layer initialized
[ 12.780523] usbcore: registered new interface driver appledisplay
[ 12.788201] Bluetooth: HCI USB driver ver 2.10
[ 12.800488] usbcore: registered new interface driver hci_usb
[ 12.825698] input: Microsoft Natural(R) Ergonomic Keyboard 4000 as
/class/input/input5
[ 12.860114] microsoft 0003:045E:00DB.0001: input,hidraw3: USB HID
v1.11 Keyboard [Microsoft Natural(R) Ergonomic Keyboard 4000] on
usb-0000:00:1d.0-1/input0
[ 12.880469] input: Microsoft Natural(R) Ergonomic Keyboard 4000 as
/class/input/input6
[ 12.912587] microsoft 0003:045E:00DB.0002: input,hidraw4: USB HID
v1.11 Device [Microsoft Natural(R) Ergonomic Keyboard 4000] on
usb-0000:00:1d.0-1/input1
[ 13.011457] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level,
low) -> IRQ 21
[ 13.011542] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.579648] input: ImPS/2 Generic Wheel Mouse as /class/input/input7
[ 13.717009] lp: driver loaded but no devices found
[ 13.804966] Adding 11904124k swap on /dev/sdb5. Priority:-1
extents:1 across:11904124k
[ 14.345116] EXT3 FS on sdb1, internal journal
[ 15.428910] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.972654] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[ 16.831485] warning: `avahi-daemon' uses 32-bit capabilities
(legacy support in use)
[ 17.151135] NET: Registered protocol family 10
[ 17.151527] lo: Disabled Privacy Extensions
[ 17.368668] ppdev: user-space parallel port driver
[ 18.840547] Bluetooth: L2CAP ver 2.11
[ 18.840549] Bluetooth: L2CAP socket layer initialized
[ 18.853843] Bluetooth: SCO (Voice Link) ver 0.6
[ 18.853846] Bluetooth: SCO socket layer initialized
[ 18.871404] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.871406] Bluetooth: BNEP filters: protocol multicast
[ 18.904493] Bluetooth: RFCOMM socket layer initialized
[ 18.904502] Bluetooth: RFCOMM TTY layer initialized
[ 18.904503] Bluetooth: RFCOMM ver 1.10
[ 18.920048] Bridge firewalling registered
[ 20.766747] [drm] Initialized drm 1.1.0 20060810
[ 20.783689] pci 0000:60:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[ 20.783694] pci 0000:60:00.0: setting latency timer to 64
[ 20.783790] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 20.930544] [drm] Setting GART location based on new memory map
[ 20.934043] [drm] Loading R500 Microcode
[ 20.934092] [drm] Num pipes: 1
[ 20.934099] [drm] writeback test succeeded in 1 usecs
[ 23.064584] tg3 0000:0e:00.0: irq 89 for MSI/MSI-X
[ 23.123986] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.682010] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 24.682013] tg3: eth0: Flow control is off for TX and off for RX.
[ 24.684258] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 35.664754] eth0: no IPv6 routers present
[ 304.532593] UDF-fs: No VRS found
[ 304.671688] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 304.699705] ISO 9660 Extensions: RRIP_1991A
[ 880.792065] ------------[ cut here ]------------
[ 880.792068] WARNING: at drivers/ata/libata-eh.c:3259
ata_eh_finish+0x9f/0xb6 [libata]()
[ 880.792070] Modules linked in: isofs zlib_inflate udf nls_base
crc_itu_t binfmt_misc radeon drm bridge stp rfcomm llc bnep sco l2cap
kvm_intel kvm ppdev ipv6 acpi_cpufreq cpufreq_powersave cpufreq_stats
cpufreq_userspace cpufreq_ondemand freq_table cpufreq_conservative
rfkill input_polldev video output container sbs sbshc battery
iptable_filter ip_tables x_tables ac parport_pc lp parport
snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy
snd_seq_oss psmouse snd_seq_midi snd_rawmidi snd_seq_midi_event
hid_microsoft hci_usb appledisplay snd_seq bluetooth serio_raw
snd_timer snd_seq_device rng_core pcspkr snd wmi button soundcore
iTCO_wdt joydev shpchp pci_hotplug evdev snd_page_alloc sg sd_mod
sr_mod crc_t10dif cdrom usb_storage usbhid hid ahci libata scsi_mod
ehci_hcd tg3 libphy uhci_hcd thermal processor fan thermal_sys fuse
[ 880.792123] Pid: 1006, comm: scsi_eh_1 Not tainted 2.6.28-rc3 #4
[ 880.792125] Call Trace:
[ 880.792132] [<ffffffff8023a89d>] warn_on_slowpath+0x51/0x75
[ 880.792141] [<ffffffffa00d3761>] ahci_postreset+0x0/0x5a [ahci]
[ 880.792146] [<ffffffffa00d2d88>] ahci_hardreset+0x0/0x138 [ahci]
[ 880.792152] [<ffffffffa00d2ccb>] ahci_softreset+0x0/0x37 [ahci]
[ 880.792167] [<ffffffffa00a418d>] ata_std_prereset+0x0/0xac [libata]
[ 880.792183] [<ffffffffa00ae4ac>] ata_eh_link_autopsy+0x3b9/0x665 [libata]
[ 880.792188] [<ffffffff80231d8b>] find_busiest_group+0x327/0x7d4
[ 880.792202] [<ffffffffa00af8bb>] ata_eh_finish+0x9f/0xb6 [libata]
[ 880.792217] [<ffffffffa00b3ed8>] sata_pmp_error_handler+0x9c4/0xa08 [libata]
[ 880.792222] [<ffffffff8020a777>] __switch_to+0xb4/0x3fe
[ 880.792226] [<ffffffff80249e0c>] __cancel_work_timer+0xb1/0x190
[ 880.792230] [<ffffffff80222665>] default_spin_lock_flags+0x5/0x8
[ 880.792234] [<ffffffff8044e8a1>] _spin_lock_irqsave+0x24/0x2c
[ 880.792237] [<ffffffff80243699>] lock_timer_base+0x26/0x4b
[ 880.792252] [<ffffffffa00a2b9d>] ata_wait_register+0x34/0x71 [libata]
[ 880.792280] [<ffffffffa00b020a>] ata_scsi_error+0x32b/0x595 [libata]
[ 880.792301] [<ffffffffa0074149>] scsi_device_put+0x2f/0x3e [scsi_mod]
[ 880.792305] [<ffffffff8044e8a1>] _spin_lock_irqsave+0x24/0x2c
[ 880.792320] [<ffffffffa0074328>] __scsi_iterate_devices+0x5e/0x6a [scsi_mod]
[ 880.792336] [<ffffffffa00785f9>] scsi_error_handler+0xd7/0x520 [scsi_mod]
[ 880.792352] [<ffffffffa0078522>] scsi_error_handler+0x0/0x520 [scsi_mod]
[ 880.792356] [<ffffffff8024ca63>] kthread+0x47/0x73
[ 880.792360] [<ffffffff80238255>] schedule_tail+0x27/0x5f
[ 880.792363] [<ffffffff8020d329>] child_rip+0xa/0x11
[ 880.792366] [<ffffffff8024ca1c>] kthread+0x0/0x73
[ 880.792369] [<ffffffff8020d31f>] child_rip+0x0/0x11
[ 880.792371] ---[ end trace e600147933842793 ]---
[ 945.968497] BUG: soft lockup - CPU#2 stuck for 61s! [kblockd/2:88]
[ 945.968501] Modules linked in: isofs zlib_inflate udf nls_base
crc_itu_t binfmt_misc radeon drm bridge stp rfcomm llc bnep sco l2cap
kvm_intel kvm ppdev ipv6 acpi_cpufreq cpufreq_powersave cpufreq_stats
cpufreq_userspace cpufreq_ondemand freq_table cpufreq_conservative
rfkill input_polldev video output container sbs sbshc battery
iptable_filter ip_tables x_tables ac parport_pc lp parport
snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy
snd_seq_oss psmouse snd_seq_midi snd_rawmidi snd_seq_midi_event
hid_microsoft hci_usb appledisplay snd_seq bluetooth serio_raw
snd_timer snd_seq_device rng_core pcspkr snd wmi button soundcore
iTCO_wdt joydev shpchp pci_hotplug evdev snd_page_alloc sg sd_mod
sr_mod crc_t10dif cdrom usb_storage usbhid hid ahci libata scsi_mod
ehci_hcd tg3 libphy uhci_hcd thermal processor fan thermal_sys fuse
[ 945.968501] CPU 2:
[ 945.968501] Modules linked in: isofs zlib_inflate udf nls_base
crc_itu_t binfmt_misc radeon drm bridge stp rfcomm llc bnep sco l2cap
kvm_intel kvm ppdev ipv6 acpi_cpufreq cpufreq_powersave cpufreq_stats
cpufreq_userspace cpufreq_ondemand freq_table cpufreq_conservative
rfkill input_polldev video output container sbs sbshc battery
iptable_filter ip_tables x_tables ac parport_pc lp parport
snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy
snd_seq_oss psmouse snd_seq_midi snd_rawmidi snd_seq_midi_event
hid_microsoft hci_usb appledisplay snd_seq bluetooth serio_raw
snd_timer snd_seq_device rng_core pcspkr snd wmi button soundcore
iTCO_wdt joydev shpchp pci_hotplug evdev snd_page_alloc sg sd_mod
sr_mod crc_t10dif cdrom usb_storage usbhid hid ahci libata scsi_mod
ehci_hcd tg3 libphy uhci_hcd thermal processor fan thermal_sys fuse
[ 945.968501] Pid: 88, comm: kblockd/2 Tainted: G W 2.6.28-rc3 #4
[ 945.968501] RIP: 0010:[<ffffffff80334e6f>] [<ffffffff80334e6f>]
kref_put+0x33/0x4c
[ 945.968501] RSP: 0018:ffff8802bfaf9dc0 EFLAGS: 00000202
[ 945.968501] RAX: ffff8802bc9d3000 RBX: ffffffff8033411c RCX: 0000000000000000
[ 945.968501] RDX: ffff8802bcd8c000 RSI: 0000000000000040 RDI: ffff8802bc9d3248
[ 945.968501] RBP: ffffffff8033411c R08: ffff8802bfa300c8 R09: 0000000000001056
[ 945.968501] R10: ffff8802bc8d80d0 R11: ffff8802bcded370 R12: ffff8802bcded370
[ 945.968501] R13: ffffffff8032467b R14: ffffffff8044e8b6 R15: ffff8802bcd8c000
[ 945.968501] FS: 0000000000000000(0000) GS:ffff8802bf862240(0000)
knlGS:0000000000000000
[ 945.968501] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[ 945.968501] CR2: 00007f091f904000 CR3: 00000002b8d96000 CR4: 00000000000026e0
[ 945.968501] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 945.968501] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 945.968501] Call Trace:
[ 945.968501] [<ffffffffa0079cbb>] ? scsi_request_fn+0x422/0x4f0 [scsi_mod]
[ 945.968501] [<ffffffff80323be0>] ? blk_unplug_work+0x0/0x65
[ 945.968501] [<ffffffff80324d8f>] ? generic_unplug_device+0x21/0x38
[ 945.968501] [<ffffffff80323c3e>] ? blk_unplug_work+0x5e/0x65
[ 945.968501] [<ffffffff80249853>] ? run_workqueue+0x9f/0x130
[ 945.968501] [<ffffffff8024984a>] ? run_workqueue+0x96/0x130
[ 945.968501] [<ffffffff8044e8a1>] ? _spin_lock_irqsave+0x24/0x2c
[ 945.968501] [<ffffffff802499bc>] ? worker_thread+0xd8/0xe7
[ 945.968501] [<ffffffff8024cd79>] ? autoremove_wake_function+0x0/0x2e
[ 945.968501] [<ffffffff802498e4>] ? worker_thread+0x0/0xe7
[ 945.968501] [<ffffffff8024ca63>] ? kthread+0x47/0x73
[ 945.968501] [<ffffffff80238255>] ? schedule_tail+0x27/0x5f
[ 945.968501] [<ffffffff8020d329>] ? child_rip+0xa/0x11
[ 945.968501] [<ffffffff8024ca1c>] ? kthread+0x0/0x73
[ 945.968501] [<ffffffff8020d31f>] ? child_rip+0x0/0x11
[ 1011.468497] BUG: soft lockup - CPU#2 stuck for 61s! [kblockd/2:88]
[ 1011.468500] Modules linked in: isofs zlib_inflate udf nls_base
crc_itu_t binfmt_misc radeon drm bridge stp rfcomm llc bnep sco l2cap
kvm_intel kvm ppdev ipv6 acpi_cpufreq cpufreq_powersave cpufreq_stats
cpufreq_userspace cpufreq_ondemand freq_table cpufreq_conservative
rfkill input_polldev video output container sbs sbshc battery
iptable_filter ip_tables x_tables ac parport_pc lp parport
snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy
snd_seq_oss psmouse snd_seq_midi snd_rawmidi snd_seq_midi_event
hid_microsoft hci_usb appledisplay snd_seq bluetooth serio_raw
snd_timer snd_seq_device rng_core pcspkr snd wmi button soundcore
iTCO_wdt joydev shpchp pci_hotplug evdev snd_page_alloc sg sd_mod
sr_mod crc_t10dif cdrom usb_storage usbhid hid ahci libata scsi_mod
ehci_hcd tg3 libphy uhci_hcd thermal processor fan thermal_sys fuse
[ 1011.468501] CPU 2:
[ 1011.468501] Modules linked in: isofs zlib_inflate udf nls_base
crc_itu_t binfmt_misc radeon drm bridge stp rfcomm llc bnep sco l2cap
kvm_intel kvm ppdev ipv6 acpi_cpufreq cpufreq_powersave cpufreq_stats
cpufreq_userspace cpufreq_ondemand freq_table cpufreq_conservative
rfkill input_polldev video output container sbs sbshc battery
iptable_filter ip_tables x_tables ac parport_pc lp parport
snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy
snd_seq_oss psmouse snd_seq_midi snd_rawmidi snd_seq_midi_event
hid_microsoft hci_usb appledisplay snd_seq bluetooth serio_raw
snd_timer snd_seq_device rng_core pcspkr snd wmi button soundcore
iTCO_wdt joydev shpchp pci_hotplug evdev snd_page_alloc sg sd_mod
sr_mod crc_t10dif cdrom usb_storage usbhid hid ahci libata scsi_mod
ehci_hcd tg3 libphy uhci_hcd thermal processor fan thermal_sys fuse
[ 1011.468501] Pid: 88, comm: kblockd/2 Tainted: G W 2.6.28-rc3 #4
[ 1011.468501] RIP: 0010:[<ffffffff8044e97a>] [<ffffffff8044e97a>]
_spin_unlock_irqrestore+0xf/0x17
[ 1011.468501] RSP: 0018:ffff8802bfaf9d60 EFLAGS: 00000286
[ 1011.468501] RAX: 0000000000000001 RBX: 0000000000001056 RCX: 0000000000000000
[ 1011.468501] RDX: 0000000000003f3e RSI: 0000000000000286 RDI: 0000000000000286
[ 1011.468501] RBP: 0000000000001056 R08: ffff8802bfa300c8 R09: 0000000000001056
[ 1011.468501] R10: ffff8802bc8d80d0 R11: ffff8802bcded370 R12: ffff8802bc8d8000
[ 1011.468501] R13: ffffffffa0079cbb R14: ffff8802bc9d3000 R15: 0000000000001056
[ 1011.468501] FS: 0000000000000000(0000) GS:ffff8802bf862240(0000)
knlGS:0000000000000000
[ 1011.468501] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[ 1011.468501] CR2: 00007f091f904000 CR3: 00000002b8d96000 CR4: 00000000000026e0
[ 1011.468501] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1011.468501] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1011.468501] Call Trace:
[ 1011.468501] [<ffffffffa007ab02>] ? scsi_queue_insert+0xcb/0xd9 [scsi_mod]
[ 1011.468501] [<ffffffff8044e947>] ? _spin_lock+0x5/0x7
[ 1011.468501] [<ffffffffa00748f9>] ? scsi_dispatch_cmd+0x1ec/0x235 [scsi_mod]
[ 1011.468501] [<ffffffffa0079c34>] ? scsi_request_fn+0x39b/0x4f0 [scsi_mod]
[ 1011.468501] [<ffffffff80323be0>] ? blk_unplug_work+0x0/0x65
[ 1011.468501] [<ffffffff80324d8f>] ? generic_unplug_device+0x21/0x38
[ 1011.468501] [<ffffffff80323c3e>] ? blk_unplug_work+0x5e/0x65
[ 1011.468501] [<ffffffff8024982d>] ? run_workqueue+0x79/0x130
[ 1011.468501] [<ffffffff8024984a>] ? run_workqueue+0x96/0x130
[ 1011.468501] [<ffffffff8044e8a1>] ? _spin_lock_irqsave+0x24/0x2c
[ 1011.468501] [<ffffffff802499bc>] ? worker_thread+0xd8/0xe7
[ 1011.468501] [<ffffffff8024cd79>] ? autoremove_wake_function+0x0/0x2e
[ 1011.468501] [<ffffffff802498e4>] ? worker_thread+0x0/0xe7
[ 1011.468501] [<ffffffff8024ca63>] ? kthread+0x47/0x73
[ 1011.468501] [<ffffffff80238255>] ? schedule_tail+0x27/0x5f
[ 1011.468501] [<ffffffff8020d329>] ? child_rip+0xa/0x11
[ 1011.468501] [<ffffffff8024ca1c>] ? kthread+0x0/0x73
[ 1011.468501] [<ffffffff8020d31f>] ? child_rip+0x0/0x11
[ 1076.964497] BUG: soft lockup - CPU#2 stuck for 61s! [kblockd/2:88]
[ 1076.964500] Modules linked in: isofs zlib_inflate udf nls_base
crc_itu_t binfmt_misc radeon drm bridge stp rfcomm llc bnep sco l2cap
kvm_intel kvm ppdev ipv6 acpi_cpufreq cpufreq_powersave cpufreq_stats
cpufreq_userspace cpufreq_ondemand freq_table cpufreq_conservative
rfkill input_polldev video output container sbs sbshc battery
iptable_filter ip_tables x_tables ac parport_pc lp parport
snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy
snd_seq_oss psmouse snd_seq_midi snd_rawmidi snd_seq_midi_event
hid_microsoft hci_usb appledisplay snd_seq bluetooth serio_raw
snd_timer snd_seq_device rng_core pcspkr snd wmi button soundcore
iTCO_wdt joydev shpchp pci_hotplug evdev snd_page_alloc sg sd_mod
sr_mod crc_t10dif cdrom usb_storage usbhid hid ahci libata scsi_mod
ehci_hcd tg3 libphy uhci_hcd thermal processor fan thermal_sys fuse
[ 1076.964501] CPU 2:
[ 1076.964501] Modules linked in: isofs zlib_inflate udf nls_base
crc_itu_t binfmt_misc radeon drm bridge stp rfcomm llc bnep sco l2cap
kvm_intel kvm ppdev ipv6 acpi_cpufreq cpufreq_powersave cpufreq_stats
cpufreq_userspace cpufreq_ondemand freq_table cpufreq_conservative
rfkill input_polldev video output container sbs sbshc battery
iptable_filter ip_tables x_tables ac parport_pc lp parport
snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy
snd_seq_oss psmouse snd_seq_midi snd_rawmidi snd_seq_midi_event
hid_microsoft hci_usb appledisplay snd_seq bluetooth serio_raw
snd_timer snd_seq_device rng_core pcspkr snd wmi button soundcore
iTCO_wdt joydev shpchp pci_hotplug evdev snd_page_alloc sg sd_mod
sr_mod crc_t10dif cdrom usb_storage usbhid hid ahci libata scsi_mod
ehci_hcd tg3 libphy uhci_hcd thermal processor fan thermal_sys fuse
[ 1076.964501] Pid: 88, comm: kblockd/2 Tainted: G W 2.6.28-rc3 #4
[ 1076.964501] RIP: 0010:[<ffffffff8044e97a>] [<ffffffff8044e97a>]
_spin_unlock_irqrestore+0xf/0x17
[ 1076.964501] RSP: 0018:ffff8802bfaf9d60 EFLAGS: 00000286
[ 1076.964501] RAX: 0000000000000001 RBX: 0000000000001056 RCX: 0000000000000000
[ 1076.964501] RDX: 000000000000faf9 RSI: 0000000000000286 RDI: 0000000000000286
[ 1076.964501] RBP: 0000000000001056 R08: ffff8802bfa300c8 R09: 0000000000001056
[ 1076.964501] R10: ffff8802bc8d80d0 R11: ffff8802bcded370 R12: 0000000000000286
[ 1076.964501] R13: ffffffffa0079cbb R14: ffff8802bc9d3000 R15: 0000000000001056
[ 1076.964501] FS: 0000000000000000(0000) GS:ffff8802bf862240(0000)
knlGS:0000000000000000
[ 1076.964501] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[ 1076.964501] CR2: 00007f091f904000 CR3: 00000002b8d96000 CR4: 00000000000026e0
[ 1076.964501] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1076.964501] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1076.964501] Call Trace:
[ 1076.964501] [<ffffffffa007ab02>] ? scsi_queue_insert+0xcb/0xd9 [scsi_mod]
[ 1076.964501] [<ffffffff8044e947>] ? _spin_lock+0x5/0x7
[ 1076.964501] [<ffffffffa00748f9>] ? scsi_dispatch_cmd+0x1ec/0x235 [scsi_mod]
[ 1076.964501] [<ffffffffa0079c34>] ? scsi_request_fn+0x39b/0x4f0 [scsi_mod]
[ 1076.964501] [<ffffffff80323be0>] ? blk_unplug_work+0x0/0x65
[ 1076.964501] [<ffffffff80324d8f>] ? generic_unplug_device+0x21/0x38
[ 1076.964501] [<ffffffff80323c3e>] ? blk_unplug_work+0x5e/0x65
[ 1076.964501] [<ffffffff80249844>] ? run_workqueue+0x90/0x130
[ 1076.964501] [<ffffffff8024984a>] ? run_workqueue+0x96/0x130
[ 1076.964501] [<ffffffff8044e8a1>] ? _spin_lock_irqsave+0x24/0x2c
[ 1076.964501] [<ffffffff802499bc>] ? worker_thread+0xd8/0xe7
[ 1076.964501] [<ffffffff8024cd79>] ? autoremove_wake_function+0x0/0x2e
[ 1076.964501] [<ffffffff802498e4>] ? worker_thread+0x0/0xe7
[ 1076.964501] [<ffffffff8024ca63>] ? kthread+0x47/0x73
[ 1076.964501] [<ffffffff80238255>] ? schedule_tail+0x27/0x5f
[ 1076.964501] [<ffffffff8020d329>] ? child_rip+0xa/0x11
[ 1076.964501] [<ffffffff8024ca1c>] ? kthread+0x0/0x73
[ 1076.964501] [<ffffffff8020d31f>] ? child_rip+0x0/0x11
[ 1142.464497] BUG: soft lockup - CPU#2 stuck for 61s! [kblockd/2:88]
[ 1142.464501] Modules linked in: isofs zlib_inflate udf nls_base
crc_itu_t binfmt_misc radeon drm bridge stp rfcomm llc bnep sco l2cap
kvm_intel kvm ppdev ipv6 acpi_cpufreq cpufreq_powersave cpufreq_stats
cpufreq_userspace cpufreq_ondemand freq_table cpufreq_conservative
rfkill input_polldev video output container sbs sbshc battery
iptable_filter ip_tables x_tables ac parport_pc lp parport
snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy
snd_seq_oss psmouse snd_seq_midi snd_rawmidi snd_seq_midi_event
hid_microsoft hci_usb appledisplay snd_seq bluetooth serio_raw
snd_timer snd_seq_device rng_core pcspkr snd wmi button soundcore
iTCO_wdt joydev shpchp pci_hotplug evdev snd_page_alloc sg sd_mod
sr_mod crc_t10dif cdrom usb_storage usbhid hid ahci libata scsi_mod
ehci_hcd tg3 libphy uhci_hcd thermal processor fan thermal_sys fuse
[ 1142.464501] CPU 2:
[ 1142.464501] Modules linked in: isofs zlib_inflate udf nls_base
crc_itu_t binfmt_misc radeon drm bridge stp rfcomm llc bnep sco l2cap
kvm_intel kvm ppdev ipv6 acpi_cpufreq cpufreq_powersave cpufreq_stats
cpufreq_userspace cpufreq_ondemand freq_table cpufreq_conservative
rfkill input_polldev video output container sbs sbshc battery
iptable_filter ip_tables x_tables ac parport_pc lp parport
snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy
snd_seq_oss psmouse snd_seq_midi snd_rawmidi snd_seq_midi_event
hid_microsoft hci_usb appledisplay snd_seq bluetooth serio_raw
snd_timer snd_seq_device rng_core pcspkr snd wmi button soundcore
iTCO_wdt joydev shpchp pci_hotplug evdev snd_page_alloc sg sd_mod
sr_mod crc_t10dif cdrom usb_storage usbhid hid ahci libata scsi_mod
ehci_hcd tg3 libphy uhci_hcd thermal processor fan thermal_sys fuse
[ 1142.464501] Pid: 88, comm: kblockd/2 Tainted: G W 2.6.28-rc3 #4
[ 1142.464501] RIP: 0010:[<ffffffff8044e97a>] [<ffffffff8044e97a>]
_spin_unlock_irqrestore+0xf/0x17
[ 1142.464501] RSP: 0018:ffff8802bfaf9da0 EFLAGS: 00000287
[ 1142.464501] RAX: 0000000000001056 RBX: ffff8802bcd25cc0 RCX: ffff8802bc8d8000
[ 1142.464501] RDX: ffff8802bc8d9cd8 RSI: 0000000000000287 RDI: 0000000000000287
[ 1142.464501] RBP: ffff8802bcd25cc0 R08: 0000000000000000 R09: 0000000000001056
[ 1142.464501] R10: ffff8802bc8d80d0 R11: 0000000000000000 R12: ffff8802bcd25cc0
[ 1142.464501] R13: 0000000000000286 R14: ffff8802bcded5d0 R15: ffff8802bcded370
[ 1142.464501] FS: 0000000000000000(0000) GS:ffff8802bf862240(0000)
knlGS:0000000000000000
[ 1142.464501] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[ 1142.464501] CR2: 00007f091f904000 CR3: 00000002b8d96000 CR4: 00000000000026e0
[ 1142.464501] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1142.464501] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1142.464501] Call Trace:
[ 1142.464501] [<ffffffffa00748d5>] ? scsi_dispatch_cmd+0x1c8/0x235 [scsi_mod]
[ 1142.464501] [<ffffffffa0079c34>] ? scsi_request_fn+0x39b/0x4f0 [scsi_mod]
[ 1142.464501] [<ffffffff80323be0>] ? blk_unplug_work+0x0/0x65
[ 1142.464501] [<ffffffff80324d8f>] ? generic_unplug_device+0x21/0x38
[ 1142.464501] [<ffffffff80323c3e>] ? blk_unplug_work+0x5e/0x65
[ 1142.464501] [<ffffffff8024982d>] ? run_workqueue+0x79/0x130
[ 1142.464501] [<ffffffff8024984a>] ? run_workqueue+0x96/0x130
[ 1142.464501] [<ffffffff8044e8a1>] ? _spin_lock_irqsave+0x24/0x2c
[ 1142.464501] [<ffffffff802499bc>] ? worker_thread+0xd8/0xe7
[ 1142.464501] [<ffffffff8024cd79>] ? autoremove_wake_function+0x0/0x2e
[ 1142.464501] [<ffffffff802498e4>] ? worker_thread+0x0/0xe7
[ 1142.464501] [<ffffffff8024ca63>] ? kthread+0x47/0x73
[ 1142.464501] [<ffffffff80238255>] ? schedule_tail+0x27/0x5f
[ 1142.464501] [<ffffffff8020d329>] ? child_rip+0xa/0x11
[ 1142.464501] [<ffffffff8024ca1c>] ? kthread+0x0/0x73
[ 1142.464501] [<ffffffff8020d31f>] ? child_rip+0x0/0x11
[ 1207.960497] BUG: soft lockup - CPU#2 stuck for 61s! [kblockd/2:88]
[ 1207.960502] Modules linked in: isofs zlib_inflate udf nls_base
crc_itu_t binfmt_misc radeon drm bridge stp rfcomm llc bnep sco l2cap
kvm_intel kvm ppdev ipv6 acpi_cpufreq cpufreq_powersave cpufreq_stats
cpufreq_userspace cpufreq_ondemand freq_table cpufreq_conservative
rfkill input_polldev video output container sbs sbshc battery
iptable_filter ip_tables x_tables ac parport_pc lp parport
snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy
snd_seq_oss psmouse snd_seq_midi snd_rawmidi snd_seq_midi_event
hid_microsoft hci_usb appledisplay snd_seq bluetooth serio_raw
snd_timer snd_seq_device rng_core pcspkr snd wmi button soundcore
iTCO_wdt joydev shpchp pci_hotplug evdev snd_page_alloc sg sd_mod
sr_mod crc_t10dif cdrom usb_storage usbhid hid ahci libata scsi_mod
ehci_hcd tg3 libphy uhci_hcd thermal processor fan thermal_sys fuse
[ 1207.960502] CPU 2:
[ 1207.960502] Modules linked in: isofs zlib_inflate udf nls_base
crc_itu_t binfmt_misc radeon drm bridge stp rfcomm llc bnep sco l2cap
kvm_intel kvm ppdev ipv6 acpi_cpufreq cpufreq_powersave cpufreq_stats
cpufreq_userspace cpufreq_ondemand freq_table cpufreq_conservative
rfkill input_polldev video output container sbs sbshc battery
iptable_filter ip_tables x_tables ac parport_pc lp parport
snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy
snd_seq_oss psmouse snd_seq_midi snd_rawmidi snd_seq_midi_event
hid_microsoft hci_usb appledisplay snd_seq bluetooth serio_raw
snd_timer snd_seq_device rng_core pcspkr snd wmi button soundcore
iTCO_wdt joydev shpchp pci_hotplug evdev snd_page_alloc sg sd_mod
sr_mod crc_t10dif cdrom usb_storage usbhid hid ahci libata scsi_mod
ehci_hcd tg3 libphy uhci_hcd thermal processor fan thermal_sys fuse
[ 1207.960502] Pid: 88, comm: kblockd/2 Tainted: G W 2.6.28-rc3 #4
[ 1207.960502] RIP: 0010:[<ffffffff8044e97a>] [<ffffffff8044e97a>]
_spin_unlock_irqrestore+0xf/0x17
[ 1207.960502] RSP: 0018:ffff8802bfaf9d60 EFLAGS: 00000286
[ 1207.960502] RAX: ffff8802bcded370 RBX: 0000000000001056 RCX: ffff8802bd069988
[ 1207.960502] RDX: 000000000009aa40 RSI: 0000000000000286 RDI: 0000000000000286
[ 1207.960502] RBP: 0000000000001056 R08: 0000000000000000 R09: 0000000000001056
[ 1207.960502] R10: ffff8802bc8d80d0 R11: 0000000000000000 R12: ffff8802bd069988
[ 1207.960502] R13: ffffffffa0079cbb R14: ffff8802bc9d3000 R15: 0000000000001056
[ 1207.960502] FS: 0000000000000000(0000) GS:ffff8802bf862240(0000)
knlGS:0000000000000000
[ 1207.960502] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[ 1207.960502] CR2: 00007f091f904000 CR3: 00000002b8d96000 CR4: 00000000000026e0
[ 1207.960502] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1207.960502] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1207.960502] Call Trace:
[ 1207.960502] [<ffffffffa007aafa>] ? scsi_queue_insert+0xc3/0xd9 [scsi_mod]
[ 1207.960502] [<ffffffff8044e947>] ? _spin_lock+0x5/0x7
[ 1207.960502] [<ffffffffa00748f9>] ? scsi_dispatch_cmd+0x1ec/0x235 [scsi_mod]
[ 1207.960502] [<ffffffffa0079c34>] ? scsi_request_fn+0x39b/0x4f0 [scsi_mod]
[ 1207.960502] [<ffffffff80323be0>] ? blk_unplug_work+0x0/0x65
[ 1207.960502] [<ffffffff80324d8f>] ? generic_unplug_device+0x21/0x38
[ 1207.960502] [<ffffffff80323c3e>] ? blk_unplug_work+0x5e/0x65
[ 1207.960502] [<ffffffff8024982d>] ? run_workqueue+0x79/0x130
[ 1207.960502] [<ffffffff8024984a>] ? run_workqueue+0x96/0x130
[ 1207.960502] [<ffffffff8044e8a1>] ? _spin_lock_irqsave+0x24/0x2c
[ 1207.960502] [<ffffffff802499bc>] ? worker_thread+0xd8/0xe7
[ 1207.960502] [<ffffffff8024cd79>] ? autoremove_wake_function+0x0/0x2e
[ 1207.960502] [<ffffffff802498e4>] ? worker_thread+0x0/0xe7
[ 1207.960502] [<ffffffff8024ca63>] ? kthread+0x47/0x73
[ 1207.960502] [<ffffffff80238255>] ? schedule_tail+0x27/0x5f
[ 1207.960502] [<ffffffff8020d329>] ? child_rip+0xa/0x11
[ 1207.960502] [<ffffffff8024ca1c>] ? kthread+0x0/0x73
[ 1207.960502] [<ffffffff8020d31f>] ? child_rip+0x0/0x11
[ 1273.460497] BUG: soft lockup - CPU#2 stuck for 61s! [kblockd/2:88]
[ 1273.460501] Modules linked in: isofs zlib_inflate udf nls_base
crc_itu_t binfmt_misc radeon drm bridge stp rfcomm llc bnep sco l2cap
kvm_intel kvm ppdev ipv6 acpi_cpufreq cpufreq_powersave cpufreq_stats
cpufreq_userspace cpufreq_ondemand freq_table cpufreq_conservative
rfkill input_polldev video output container sbs sbshc battery
iptable_filter ip_tables x_tables ac parport_pc lp parport
snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy
snd_seq_oss psmouse snd_seq_midi snd_rawmidi snd_seq_midi_event
hid_microsoft hci_usb appledisplay snd_seq bluetooth serio_raw
snd_timer snd_seq_device rng_core pcspkr snd wmi button soundcore
iTCO_wdt joydev shpchp pci_hotplug evdev snd_page_alloc sg sd_mod
sr_mod crc_t10dif cdrom usb_storage usbhid hid ahci libata scsi_mod
ehci_hcd tg3 libphy uhci_hcd thermal processor fan thermal_sys fuse
[ 1273.460501] CPU 2:
[ 1273.460501] Modules linked in: isofs zlib_inflate udf nls_base
crc_itu_t binfmt_misc radeon drm bridge stp rfcomm llc bnep sco l2cap
kvm_intel kvm ppdev ipv6 acpi_cpufreq cpufreq_powersave cpufreq_stats
cpufreq_userspace cpufreq_ondemand freq_table cpufreq_conservative
rfkill input_polldev video output container sbs sbshc battery
iptable_filter ip_tables x_tables ac parport_pc lp parport
snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy
snd_seq_oss psmouse snd_seq_midi snd_rawmidi snd_seq_midi_event
hid_microsoft hci_usb appledisplay snd_seq bluetooth serio_raw
snd_timer snd_seq_device rng_core pcspkr snd wmi button soundcore
iTCO_wdt joydev shpchp pci_hotplug evdev snd_page_alloc sg sd_mod
sr_mod crc_t10dif cdrom usb_storage usbhid hid ahci libata scsi_mod
ehci_hcd tg3 libphy uhci_hcd thermal processor fan thermal_sys fuse
[ 1273.460501] Pid: 88, comm: kblockd/2 Tainted: G W 2.6.28-rc3 #4
[ 1273.460501] RIP: 0010:[<ffffffff8044e97a>] [<ffffffff8044e97a>]
_spin_unlock_irqrestore+0xf/0x17
[ 1273.460501] RSP: 0018:ffff8802bfaf9c50 EFLAGS: 00000282
[ 1273.460501] RAX: 0000000000000001 RBX: 0000000000001056 RCX: 0000000000000000
[ 1273.460501] RDX: 0000000000000001 RSI: 0000000000000282 RDI: 0000000000000282
[ 1273.460501] RBP: 0000000000001056 R08: ffff8802bfa300c8 R09: 0000000000001056
[ 1273.460501] R10: ffff8802bc8d80d0 R11: 0000000000001056 R12: ffff8802bfaf9c00
[ 1273.460501] R13: 0000000000000003 R14: 0000000000000082 R15: 0000000000000001
[ 1273.460501] FS: 0000000000000000(0000) GS:ffff8802bf862240(0000)
knlGS:0000000000000000
[ 1273.460501] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[ 1273.460501] CR2: 00007f091f904000 CR3: 00000002b8d96000 CR4: 00000000000026e0
[ 1273.460501] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1273.460501] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1273.460501] Call Trace:
[ 1273.460501] [<ffffffffa007ab02>] ? scsi_queue_insert+0xcb/0xd9 [scsi_mod]
[ 1273.460501] [<ffffffff8044e947>] ? _spin_lock+0x5/0x7
[ 1273.460501] [<ffffffffa00748f9>] ? scsi_dispatch_cmd+0x1ec/0x235 [scsi_mod]
[ 1273.460501] [<ffffffffa0079c34>] ? scsi_request_fn+0x39b/0x4f0 [scsi_mod]
[ 1273.460501] [<ffffffff80324654>] ? blk_invoke_request_fn+0x6f/0x137
[ 1273.460501] [<ffffffff80324c39>] ? blk_run_queue+0x21/0x34
[ 1273.460501] [<ffffffffa007ab02>] ? scsi_queue_insert+0xcb/0xd9 [scsi_mod]
[ 1273.460501] [<ffffffff8044e947>] ? _spin_lock+0x5/0x7
[ 1273.460501] [<ffffffffa00748f9>] ? scsi_dispatch_cmd+0x1ec/0x235 [scsi_mod]
[ 1273.460501] [<ffffffffa0079c34>] ? scsi_request_fn+0x39b/0x4f0 [scsi_mod]
[ 1273.460501] [<ffffffff80323be0>] ? blk_unplug_work+0x0/0x65
[ 1273.460501] [<ffffffff80324d8f>] ? generic_unplug_device+0x21/0x38
[ 1273.460501] [<ffffffff80323c3e>] ? blk_unplug_work+0x5e/0x65
[ 1273.460501] [<ffffffff8024982d>] ? run_workqueue+0x79/0x130
[ 1273.460501] [<ffffffff8024984a>] ? run_workqueue+0x96/0x130
[ 1273.460501] [<ffffffff8044e8a1>] ? _spin_lock_irqsave+0x24/0x2c
[ 1273.460501] [<ffffffff802499bc>] ? worker_thread+0xd8/0xe7
[ 1273.460501] [<ffffffff8024cd79>] ? autoremove_wake_function+0x0/0x2e
[ 1273.460501] [<ffffffff802498e4>] ? worker_thread+0x0/0xe7
[ 1273.460501] [<ffffffff8024ca63>] ? kthread+0x47/0x73
[ 1273.460501] [<ffffffff80238255>] ? schedule_tail+0x27/0x5f
[ 1273.460501] [<ffffffff8020d329>] ? child_rip+0xa/0x11
[ 1273.460501] [<ffffffff8024ca1c>] ? kthread+0x0/0x73
[ 1273.460501] [<ffffffff8020d31f>] ? child_rip+0x0/0x11
Attachment:
config-xw6600
Description: Binary data
