Hello.
Phil Sutter wrote:
After applying the following changes I could verify functionality by
mounting a filesystem on the cfdisk and reading/writing files in it.
Some of the changes look unneeded and some just strange...
The symbols rb532_gpio_set_ilevel and rb532_gpio_set_istat are not yet
available in a vanilla kernel, an appropriate patch has already been
sent to the linux-mips mailinglist.
Signed-off-by: Phil Sutter <n0-1@xxxxxxxxxxx>
---
drivers/ata/pata_rb532_cf.c | 25 +++++++++++++++++++------
1 files changed, 19 insertions(+), 6 deletions(-)
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index f8b3ffc..a8b3c3a 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -39,9 +39,14 @@
#define RB500_CF_MAXPORTS 1
#define RB500_CF_IO_DELAY 400
-#define RB500_CF_REG_CMD 0x0800
+#define RB500_CF_REG_BASE 0x0800
#define RB500_CF_REG_CTRL 0x080E
#define RB500_CF_REG_DATA 0x0C00
+#define RB500_CF_REG_ERR 0x080D
Hm...
+/* exported in arch/mips/rb532/gpio.c */
+extern void rb532_gpio_set_ilevel(int bit, unsigned gpio);
+extern void rb532_gpio_set_istat(int bit, unsigned gpio);
Those should better be in some header file...
@@ -62,21 +67,23 @@ static inline void rb532_pata_finish_io(struct ata_port *ap)
static void rb532_pata_exec_command(struct ata_port *ap,
const struct ata_taskfile *tf)
{
+
Totally unneeded change.
writeb(tf->command, ap->ioaddr.command_addr);
rb532_pata_finish_io(ap);
}
-static void rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
+static unsigned int rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
unsigned int buflen, int write_data)
{
struct ata_port *ap = adev->link->ap;
void __iomem *ioaddr = ap->ioaddr.data_addr;
+ unsigned int ret = buflen;
if (write_data) {
for (; buflen > 0; buflen--, buf++)
@@ -87,6 +94,8 @@ static void rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
}
rb532_pata_finish_io(adev->link->ap);
+
+ return ret;
Totally unneeded variable.
@@ -109,13 +118,16 @@ static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance)
struct rb532_cf_info *info = ah->private_data;
if (gpio_get_value(info->gpio_line)) {
- set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW);
+ rb532_gpio_set_ilevel(0, info->gpio_line);
if (!info->frozen)
ata_sff_interrupt(info->irq, dev_instance);
} else {
- set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
+ rb532_gpio_set_ilevel(1, info->gpio_line);
}
+ rb532_gpio_set_istat(0, info->gpio_line);
+
+
One line too many...
@@ -146,12 +158,13 @@ static void rb532_pata_setup_ports(struct ata_host *ah)
ap->pio_mask = 0x1f; /* PIO4 */
ap->flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO;
- ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_CMD;
+ ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_BASE;
ap->ioaddr.ctl_addr = info->iobase + RB500_CF_REG_CTRL;
ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL;
ata_sff_std_ports(&ap->ioaddr);
+ ap->ioaddr.error_addr = info->iobase + RB500_CF_REG_ERR;
Wait, how's that?! The error register belongs to the 8-register
command block, not to the control block.
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html