[PATCH libata-dev#upstream 3/3] libata: implement and use ata_port_desc() to report port configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently, port configuration reporting has the following problems.

* iomapped address is reported instead of raw address
* report contains irrelevant fields or lacks necessary fields for
  non-SFF controllers.
* host->irq/irq2 are there just for reporting and hacky.

This patch implements and uses ata_port_desc() and
ata_port_pbar_desc().  ata_port_desc() is almost identical to
ata_ehi_push_desc() except that it takes @ap instead of @ehi, has no
locking requirement, can only be used during host initialization and "
" is used as separator instead of ", ".  ata_port_pbar_desc() is a
helper to ease reporting of a PCI BAR or an offsetted address into it.

LLD pushes whatever description it wants using the above two
functions.  The accumulated description is printed on host
registration after "[S/P]ATA max MAX_XFERMODE ".

SFF init helpers and ata_host_activate() automatically add
descriptions for addresses and irq respectively, so only LLDs which
isn't standard SFF need to add custom descriptions.  In many cases,
such controllers need to report different things anyway.

Signed-off-by: Tejun Heo <htejun@xxxxxxxxx>
---
pata_hpt3x3 fixed as pointed out by Alan.

 drivers/ata/ahci.c           |    4 ++
 drivers/ata/libata-core.c    |   27 +++++++----------
 drivers/ata/libata-eh.c      |   67 +++++++++++++++++++++++++++++++++++++++++++
 drivers/ata/libata-sff.c     |   23 +++++++++++---
 drivers/ata/pata_cs5520.c    |   23 +++++++++-----
 drivers/ata/pata_hpt3x3.c    |    6 +++
 drivers/ata/pata_icside.c    |   19 ++++++++++--
 drivers/ata/pata_isapnp.c    |    4 ++
 drivers/ata/pata_ixp4xx_cf.c |   13 +++++++-
 drivers/ata/pata_legacy.c    |    2 +
 drivers/ata/pata_mpc52xx.c   |    7 +++-
 drivers/ata/pata_mpiix.c     |   16 ++++++----
 drivers/ata/pata_pcmcia.c    |    2 +
 drivers/ata/pata_pdc2027x.c  |   17 +++++++---
 drivers/ata/pata_platform.c  |    4 ++
 drivers/ata/pata_qdi.c       |    5 ++-
 drivers/ata/pata_scc.c       |    3 +
 drivers/ata/pata_winbond.c   |    7 +++-
 drivers/ata/pdc_adma.c       |   13 ++++++--
 drivers/ata/sata_inic162x.c  |   14 +++++++-
 drivers/ata/sata_mv.c        |    8 ++++-
 drivers/ata/sata_promise.c   |   11 +++++--
 drivers/ata/sata_qstor.c     |   11 +++++--
 drivers/ata/sata_sil.c       |    6 +++
 drivers/ata/sata_sil24.c     |    7 +++-
 drivers/ata/sata_svw.c       |   12 +++++--
 drivers/ata/sata_sx4.c       |   19 +++++++-----
 drivers/ata/sata_uli.c       |   13 ++++++++
 drivers/ata/sata_via.c       |    3 +
 drivers/ata/sata_vsc.c       |   12 +++++--
 include/linux/libata.h       |   12 ++++++-
 31 files changed, 309 insertions(+), 81 deletions(-)

Index: work/drivers/ata/ahci.c
===================================================================
--- work.orig/drivers/ata/ahci.c
+++ work/drivers/ata/ahci.c
@@ -1852,6 +1852,10 @@ static int ahci_init_one(struct pci_dev 
 		struct ata_port *ap = host->ports[i];
 		void __iomem *port_mmio = ahci_port_base(ap);
 
+		ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar");
+		ata_port_pbar_desc(ap, AHCI_PCI_BAR,
+				   0x100 + ap->port_no * 0x80, "port");
+
 		/* standard SATA port setup */
 		if (hpriv->port_map & (1 << i))
 			ap->ioaddr.cmd_addr = port_mmio;
Index: work/drivers/ata/libata-core.c
===================================================================
--- work.orig/drivers/ata/libata-core.c
+++ work/drivers/ata/libata-core.c
@@ -6369,7 +6369,6 @@ int ata_host_register(struct ata_host *h
 	/* set cable, sata_spd_limit and report */
 	for (i = 0; i < host->n_ports; i++) {
 		struct ata_port *ap = host->ports[i];
-		int irq_line;
 		u32 scontrol;
 		unsigned long xfer_mask;
 
@@ -6385,24 +6384,16 @@ int ata_host_register(struct ata_host *h
 		}
 		ap->sata_spd_limit = ap->hw_sata_spd_limit;
 
-		/* report the secondary IRQ for second channel legacy */
-		irq_line = host->irq;
-		if (i == 1 && host->irq2)
-			irq_line = host->irq2;
-
+		/* print per-port info to dmesg */
 		xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask,
 					      ap->udma_mask);
 
-		/* print per-port info to dmesg */
 		if (!ata_port_is_dummy(ap))
-			ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%p "
-					"ctl 0x%p bmdma 0x%p irq %d\n",
+			ata_port_printk(ap, KERN_INFO,
+					"%cATA max %s %s\n",
 					(ap->flags & ATA_FLAG_SATA) ? 'S' : 'P',
 					ata_mode_string(xfer_mask),
-					ap->ioaddr.cmd_addr,
-					ap->ioaddr.ctl_addr,
-					ap->ioaddr.bmdma_addr,
-					irq_line);
+					ap->eh_info.desc);
 		else
 			ata_port_printk(ap, KERN_INFO, "DUMMY\n");
 	}
@@ -6485,7 +6476,7 @@ int ata_host_activate(struct ata_host *h
 		      irq_handler_t irq_handler, unsigned long irq_flags,
 		      struct scsi_host_template *sht)
 {
-	int rc;
+	int i, rc;
 
 	rc = ata_host_start(host);
 	if (rc)
@@ -6496,8 +6487,8 @@ int ata_host_activate(struct ata_host *h
 	if (rc)
 		return rc;
 
-	/* Used to print device info at probe */
-	host->irq = irq;
+	for (i = 0; i < host->n_ports; i++)
+		ata_port_desc(host->ports[i], "irq %d", irq);
 
 	rc = ata_host_register(host, sht);
 	/* if failed, just free the IRQ and leave ports alone */
@@ -6967,6 +6958,10 @@ EXPORT_SYMBOL_GPL(ata_pci_clear_simplex)
 EXPORT_SYMBOL_GPL(__ata_ehi_push_desc);
 EXPORT_SYMBOL_GPL(ata_ehi_push_desc);
 EXPORT_SYMBOL_GPL(ata_ehi_clear_desc);
+EXPORT_SYMBOL_GPL(ata_port_desc);
+#ifdef CONFIG_PCI
+EXPORT_SYMBOL_GPL(ata_port_pbar_desc);
+#endif /* CONFIG_PCI */
 EXPORT_SYMBOL_GPL(ata_eng_timeout);
 EXPORT_SYMBOL_GPL(ata_port_schedule_eh);
 EXPORT_SYMBOL_GPL(ata_port_abort);
Index: work/drivers/ata/libata-eh.c
===================================================================
--- work.orig/drivers/ata/libata-eh.c
+++ work/drivers/ata/libata-eh.c
@@ -151,6 +151,73 @@ void ata_ehi_clear_desc(struct ata_eh_in
 	ehi->desc_len = 0;
 }
 
+/**
+ *	ata_port_desc - append port description
+ *	@ap: target ATA port
+ *	@fmt: printf format string
+ *
+ *	Format string according to @fmt and append it to port
+ *	description.  If port description is not empty, " " is added
+ *	in-between.  This function is to be used while initializing
+ *	ata_host.  The description is printed on host registration.
+ *
+ *	LOCKING:
+ *	None.
+ */
+void ata_port_desc(struct ata_port *ap, const char *fmt, ...)
+{
+	va_list args;
+
+	WARN_ON(!(ap->pflags & ATA_PFLAG_INITIALIZING));
+
+	if (ap->eh_info.desc_len)
+		__ata_ehi_push_desc(&ap->eh_info, " ");
+
+	va_start(args, fmt);
+	__ata_ehi_pushv_desc(&ap->eh_info, fmt, args);
+	va_end(args);
+}
+
+#ifdef CONFIG_PCI
+
+/**
+ *	ata_port_pbar_desc - append PCI BAR description
+ *	@ap: target ATA port
+ *	@bar: target PCI BAR
+ *	@offset: offset into PCI BAR
+ *	@name: name of the area
+ *
+ *	If @offset is negative, this function formats a string which
+ *	contains the name, address, size and type of the BAR and
+ *	appends it to the port description.  If @offset is zero or
+ *	positive, only name and offsetted address is appended.
+ *
+ *	LOCKING:
+ *	None.
+ */
+void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset,
+			const char *name)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	char *type = "";
+	unsigned long long start, len;
+
+	if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM)
+		type = "m";
+	else if (pci_resource_flags(pdev, bar) & IORESOURCE_IO)
+		type = "i";
+
+	start = (unsigned long long)pci_resource_start(pdev, bar);
+	len = (unsigned long long)pci_resource_len(pdev, bar);
+
+	if (offset < 0)
+		ata_port_desc(ap, "%s %s%llu@0x%llx", name, type, len, start);
+	else
+		ata_port_desc(ap, "%s 0x%llx", name, start + offset);
+}
+
+#endif /* CONFIG_PCI */
+
 static void ata_ering_record(struct ata_ering *ering, int is_io,
 			     unsigned int err_mask)
 {
Index: work/drivers/ata/libata-sff.c
===================================================================
--- work.orig/drivers/ata/libata-sff.c
+++ work/drivers/ata/libata-sff.c
@@ -600,6 +600,9 @@ int ata_pci_init_bmdma(struct ata_host *
 		if ((!(ap->flags & ATA_FLAG_IGN_SIMPLEX)) &&
 		    (ioread8(bmdma + 2) & 0x80))
 			host->flags |= ATA_HOST_SIMPLEX;
+
+		ata_port_desc(ap, "bmdma 0x%llx",
+			(unsigned long long)pci_resource_start(pdev, 4) + 8 * i);
 	}
 
 	return 0;
@@ -667,6 +670,10 @@ int ata_pci_init_sff_host(struct ata_hos
 			((unsigned long)iomap[base + 1] | ATA_PCI_CTL_OFS);
 		ata_std_ports(&ap->ioaddr);
 
+		ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx",
+			(unsigned long long)pci_resource_start(pdev, base),
+			(unsigned long long)pci_resource_start(pdev, base + 1));
+
 		mask |= 1 << i;
 	}
 
@@ -837,24 +844,30 @@ int ata_pci_init_one(struct pci_dev *pde
 				      IRQF_SHARED, DRV_NAME, host);
 		if (rc)
 			goto err_out;
-		host->irq = pdev->irq;
+
+		ata_port_desc(host->ports[0], "irq %d", pdev->irq);
+		ata_port_desc(host->ports[1], "irq %d", pdev->irq);
 	} else {
 		if (!ata_port_is_dummy(host->ports[0])) {
-			host->irq = ATA_PRIMARY_IRQ(pdev);
-			rc = devm_request_irq(dev, host->irq,
+			rc = devm_request_irq(dev, ATA_PRIMARY_IRQ(pdev),
 					      pi->port_ops->irq_handler,
 					      IRQF_SHARED, DRV_NAME, host);
 			if (rc)
 				goto err_out;
+
+			ata_port_desc(host->ports[0], "irq %d",
+				      ATA_PRIMARY_IRQ(pdev));
 		}
 
 		if (!ata_port_is_dummy(host->ports[1])) {
-			host->irq2 = ATA_SECONDARY_IRQ(pdev);
-			rc = devm_request_irq(dev, host->irq2,
+			rc = devm_request_irq(dev, ATA_SECONDARY_IRQ(pdev),
 					      pi->port_ops->irq_handler,
 					      IRQF_SHARED, DRV_NAME, host);
 			if (rc)
 				goto err_out;
+
+			ata_port_desc(host->ports[1], "irq %d",
+				      ATA_SECONDARY_IRQ(pdev));
 		}
 	}
 
Index: work/drivers/ata/pata_cs5520.c
===================================================================
--- work.orig/drivers/ata/pata_cs5520.c
+++ work/drivers/ata/pata_cs5520.c
@@ -191,6 +191,8 @@ static struct ata_port_operations cs5520
 
 static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
+	static const unsigned int cmd_port[] = { 0x1F0, 0x170 };
+	static const unsigned int ctl_port[] = { 0x3F6, 0x376 };
 	struct ata_port_info pi = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= 0x1f,
@@ -244,10 +246,10 @@ static int __devinit cs5520_init_one(str
 	}
 
 	/* Map IO ports and initialize host accordingly */
-	iomap[0] = devm_ioport_map(&pdev->dev, 0x1F0, 8);
-	iomap[1] = devm_ioport_map(&pdev->dev, 0x3F6, 1);
-	iomap[2] = devm_ioport_map(&pdev->dev, 0x170, 8);
-	iomap[3] = devm_ioport_map(&pdev->dev, 0x376, 1);
+	iomap[0] = devm_ioport_map(&pdev->dev, cmd_port[0], 8);
+	iomap[1] = devm_ioport_map(&pdev->dev, ctl_port[0], 1);
+	iomap[2] = devm_ioport_map(&pdev->dev, cmd_port[1], 8);
+	iomap[3] = devm_ioport_map(&pdev->dev, ctl_port[1], 1);
 	iomap[4] = pcim_iomap(pdev, 2, 0);
 
 	if (!iomap[0] || !iomap[1] || !iomap[2] || !iomap[3] || !iomap[4])
@@ -260,6 +262,10 @@ static int __devinit cs5520_init_one(str
 	ioaddr->bmdma_addr = iomap[4];
 	ata_std_ports(ioaddr);
 
+	ata_port_desc(host->ports[0],
+		      "cmd 0x%x ctl 0x%x", cmd_port[0], ctl_port[0]);
+	ata_port_pbar_desc(host->ports[0], 4, 0, "bmdma");
+
 	ioaddr = &host->ports[1]->ioaddr;
 	ioaddr->cmd_addr = iomap[2];
 	ioaddr->ctl_addr = iomap[3];
@@ -267,6 +273,10 @@ static int __devinit cs5520_init_one(str
 	ioaddr->bmdma_addr = iomap[4] + 8;
 	ata_std_ports(ioaddr);
 
+	ata_port_desc(host->ports[1],
+		      "cmd 0x%x ctl 0x%x", cmd_port[1], ctl_port[1]);
+	ata_port_pbar_desc(host->ports[1], 4, 8, "bmdma");
+
 	/* activate the host */
 	pci_set_master(pdev);
 	rc = ata_host_start(host);
@@ -285,10 +295,7 @@ static int __devinit cs5520_init_one(str
 		if (rc)
 			return rc;
 
-		if (i == 0)
-			host->irq = irq[0];
-		else
-			host->irq2 = irq[1];
+		ata_port_desc(ap, "irq %d", irq[i]);
 	}
 
 	return ata_host_register(host, &cs5520_sht);
Index: work/drivers/ata/pata_hpt3x3.c
===================================================================
--- work.orig/drivers/ata/pata_hpt3x3.c
+++ work/drivers/ata/pata_hpt3x3.c
@@ -239,7 +239,8 @@ static int hpt3x3_init_one(struct pci_de
 	base = host->iomap[4];	/* Bus mastering base */
 
 	for (i = 0; i < host->n_ports; i++) {
-		struct ata_ioports *ioaddr = &host->ports[i]->ioaddr;
+		struct ata_port *ap = host->ports[i];
+		struct ata_ioports *ioaddr = &ap->ioaddr;
 
 		ioaddr->cmd_addr = base + offset_cmd[i];
 		ioaddr->altstatus_addr =
@@ -247,6 +248,9 @@ static int hpt3x3_init_one(struct pci_de
 		ioaddr->scr_addr = NULL;
 		ata_std_ports(ioaddr);
 		ioaddr->bmdma_addr = base + 8 * i;
+
+		ata_port_pbar_desc(ap, 4, -1, "ioport");
+		ata_port_pbar_desc(ap, 4, offset_cmd[i], "cmd");
 	}
 	pci_set_master(pdev);
 	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
Index: work/drivers/ata/pata_icside.c
===================================================================
--- work.orig/drivers/ata/pata_icside.c
+++ work/drivers/ata/pata_icside.c
@@ -70,6 +70,8 @@ struct pata_icside_info {
 	unsigned int		mwdma_mask;
 	unsigned int		nr_ports;
 	const struct portinfo	*port[2];
+	unsigned long		raw_base;
+	unsigned long		raw_ioc_base;
 };
 
 #define ICS_TYPE_A3IN	0
@@ -411,9 +413,10 @@ static struct ata_port_operations pata_i
 };
 
 static void __devinit
-pata_icside_setup_ioaddr(struct ata_ioports *ioaddr, void __iomem *base,
+pata_icside_setup_ioaddr(struct ata_port *ap, void __iomem *base,
 			 const struct portinfo *info)
 {
+	struct ata_ioports *ioaddr = &ap->ioaddr;
 	void __iomem *cmd = base + info->dataoffset;
 
 	ioaddr->cmd_addr	= cmd;
@@ -430,6 +433,13 @@ pata_icside_setup_ioaddr(struct ata_iopo
 
 	ioaddr->ctl_addr	= base + info->ctrloffset;
 	ioaddr->altstatus_addr	= ioaddr->ctl_addr;
+
+	ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx",
+		      info->raw_base + info->dataoffset,
+		      info->raw_base + info->ctrloffset);
+
+	if (info->raw_ioc_base)
+		ata_port_desc(ap, "iocbase 0x%lx", info->raw_ioc_base);
 }
 
 static int __devinit pata_icside_register_v5(struct pata_icside_info *info)
@@ -450,6 +460,8 @@ static int __devinit pata_icside_registe
 	info->nr_ports = 1;
 	info->port[0] = &pata_icside_portinfo_v5;
 
+	info->raw_base = ecard_resource_start(ec, ECARD_RES_MEMC);
+
 	return 0;
 }
 
@@ -497,6 +509,9 @@ static int __devinit pata_icside_registe
 	info->port[0] = &pata_icside_portinfo_v6_1;
 	info->port[1] = &pata_icside_portinfo_v6_2;
 
+	info->raw_base = ecard_resource_start(ec, ECARD_RES_EASI);
+	info->raw_ioc_base = ecard_resource_start(ec, ECARD_RES_IOCFAST);
+
 	return icside_dma_init(info);
 }
 
@@ -533,7 +548,7 @@ static int __devinit pata_icside_add_por
 		ap->flags |= ATA_FLAG_SLAVE_POSS;
 		ap->ops = &pata_icside_port_ops;
 
-		pata_icside_setup_ioaddr(&ap->ioaddr, info->base, info->port[i]);
+		pata_icside_setup_ioaddr(ap, info->base, info->port[i]);
 	}
 
 	return ata_host_activate(host, ec->irq, ata_interrupt, 0,
Index: work/drivers/ata/pata_isapnp.c
===================================================================
--- work.orig/drivers/ata/pata_isapnp.c
+++ work/drivers/ata/pata_isapnp.c
@@ -112,6 +112,10 @@ static int isapnp_init_one(struct pnp_de
 
 	ata_std_ports(&ap->ioaddr);
 
+	ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx",
+		      (unsigned long long)pnp_port_start(idev, 0),
+		      (unsigned long long)pnp_port_start(idev, 1));
+
 	/* activate */
 	return ata_host_activate(host, pnp_irq(idev, 0), ata_interrupt, 0,
 				 &isapnp_sht);
Index: work/drivers/ata/pata_ixp4xx_cf.c
===================================================================
--- work.orig/drivers/ata/pata_ixp4xx_cf.c
+++ work/drivers/ata/pata_ixp4xx_cf.c
@@ -134,8 +134,12 @@ static struct ata_port_operations ixp4xx
 };
 
 static void ixp4xx_setup_port(struct ata_ioports *ioaddr,
-				struct ixp4xx_pata_data *data)
+			      struct ixp4xx_pata_data *data,
+			      unsigned long raw_cs0, unsigned long raw_cs1)
 {
+	unsigned long raw_cmd = raw_cs0;
+	unsigned long raw_ctl = raw_cs1 + 0x06;
+
 	ioaddr->cmd_addr	= data->cs0;
 	ioaddr->altstatus_addr	= data->cs1 + 0x06;
 	ioaddr->ctl_addr	= data->cs1 + 0x06;
@@ -161,7 +165,12 @@ static void ixp4xx_setup_port(struct ata
 	*(unsigned long *)&ioaddr->device_addr		^= 0x03;
 	*(unsigned long *)&ioaddr->status_addr		^= 0x03;
 	*(unsigned long *)&ioaddr->command_addr		^= 0x03;
+
+	raw_cmd ^= 0x03;
+	raw_ctl ^= 0x03;
 #endif
+
+	ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", raw_cmd, raw_ctl);
 }
 
 static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
@@ -203,7 +212,7 @@ static __devinit int ixp4xx_pata_probe(s
 	ap->pio_mask = 0x1f; /* PIO4 */
 	ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_NO_ATAPI;
 
-	ixp4xx_setup_port(&ap->ioaddr, data);
+	ixp4xx_setup_port(ap, data, cs0->start, cs1->start);
 
 	dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
 
Index: work/drivers/ata/pata_legacy.c
===================================================================
--- work.orig/drivers/ata/pata_legacy.c
+++ work/drivers/ata/pata_legacy.c
@@ -814,6 +814,8 @@ static __init int legacy_init_one(int po
 	ata_std_ports(&ap->ioaddr);
 	ap->private_data = ld;
 
+	ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, ctrl);
+
 	ret = ata_host_activate(host, irq, ata_interrupt, 0, &legacy_sht);
 	if (ret)
 		goto fail;
Index: work/drivers/ata/pata_mpc52xx.c
===================================================================
--- work.orig/drivers/ata/pata_mpc52xx.c
+++ work/drivers/ata/pata_mpc52xx.c
@@ -304,7 +304,8 @@ static struct ata_port_operations mpc52x
 };
 
 static int __devinit
-mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv)
+mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv,
+		     unsigned long raw_ata_regs)
 {
 	struct ata_host *host;
 	struct ata_port *ap;
@@ -338,6 +339,8 @@ mpc52xx_ata_init_one(struct device *dev,
 	aio->status_addr	= &priv->ata_regs->tf_command;
 	aio->command_addr	= &priv->ata_regs->tf_command;
 
+	ata_port_desc(ap, "ata_regs 0x%lx", raw_ata_regs);
+
 	/* activate host */
 	return ata_host_activate(host, priv->ata_irq, ata_interrupt, 0,
 				 &mpc52xx_ata_sht);
@@ -434,7 +437,7 @@ mpc52xx_ata_probe(struct of_device *op, 
 	}
 
 	/* Register ourselves to libata */
-	rv = mpc52xx_ata_init_one(&op->dev, priv);
+	rv = mpc52xx_ata_init_one(&op->dev, priv, res_mem.start);
 	if (rv) {
 		printk(KERN_ERR DRV_NAME ": "
 			"Error while registering to ATA layer\n");
Index: work/drivers/ata/pata_mpiix.c
===================================================================
--- work.orig/drivers/ata/pata_mpiix.c
+++ work/drivers/ata/pata_mpiix.c
@@ -202,7 +202,7 @@ static int mpiix_init_one(struct pci_dev
 	struct ata_port *ap;
 	void __iomem *cmd_addr, *ctl_addr;
 	u16 idetim;
-	int irq;
+	int cmd, ctl, irq;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
@@ -210,6 +210,7 @@ static int mpiix_init_one(struct pci_dev
 	host = ata_host_alloc(&dev->dev, 1);
 	if (!host)
 		return -ENOMEM;
+	ap = host->ports[0];
 
 	/* MPIIX has many functions which can be turned on or off according
 	   to other devices present. Make sure IDE is enabled before we try
@@ -221,25 +222,28 @@ static int mpiix_init_one(struct pci_dev
 
 	/* See if it's primary or secondary channel... */
 	if (!(idetim & SECONDARY)) {
+		cmd = 0x1F0;
+		ctl = 0x3F6;
 		irq = 14;
-		cmd_addr = devm_ioport_map(&dev->dev, 0x1F0, 8);
-		ctl_addr = devm_ioport_map(&dev->dev, 0x3F6, 1);
 	} else {
+		cmd = 0x170;
+		ctl = 0x376;
 		irq = 15;
-		cmd_addr = devm_ioport_map(&dev->dev, 0x170, 8);
-		ctl_addr = devm_ioport_map(&dev->dev, 0x376, 1);
 	}
 
+	cmd_addr = devm_ioport_map(&dev->dev, cmd, 8);
+	ctl_addr = devm_ioport_map(&dev->dev, ctl, 1);
 	if (!cmd_addr || !ctl_addr)
 		return -ENOMEM;
 
+	ata_port_desc(ap, "cmd 0x%x ctl 0x%x", cmd, ctl);
+
 	/* We do our own plumbing to avoid leaking special cases for whacko
 	   ancient hardware into the core code. There are two issues to
 	   worry about.  #1 The chip is a bridge so if in legacy mode and
 	   without BARs set fools the setup.  #2 If you pci_disable_device
 	   the MPIIX your box goes castors up */
 
-	ap = host->ports[0];
 	ap->ops = &mpiix_port_ops;
 	ap->pio_mask = 0x1F;
 	ap->flags |= ATA_FLAG_SLAVE_POSS;
Index: work/drivers/ata/pata_pcmcia.c
===================================================================
--- work.orig/drivers/ata/pata_pcmcia.c
+++ work/drivers/ata/pata_pcmcia.c
@@ -304,6 +304,8 @@ next_entry:
 	ap->ioaddr.ctl_addr = ctl_addr;
 	ata_std_ports(&ap->ioaddr);
 
+	ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base);
+
 	/* activate */
 	ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_interrupt,
 				IRQF_SHARED, &pcmcia_sht);
Index: work/drivers/ata/pata_pdc2027x.c
===================================================================
--- work.orig/drivers/ata/pata_pdc2027x.c
+++ work/drivers/ata/pata_pdc2027x.c
@@ -791,12 +791,14 @@ static void pdc_ata_setup_port(struct at
 static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
+	static const unsigned long cmd_offset[] = { 0x17c0, 0x15c0 };
+	static const unsigned long bmdma_offset[] = { 0x1000, 0x1008 };
 	unsigned int board_idx = (unsigned int) ent->driver_data;
 	const struct ata_port_info *ppi[] =
 		{ &pdc2027x_port_info[board_idx], NULL };
 	struct ata_host *host;
 	void __iomem *mmio_base;
-	int rc;
+	int i, rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
@@ -826,10 +828,15 @@ static int __devinit pdc2027x_init_one(s
 
 	mmio_base = host->iomap[PDC_MMIO_BAR];
 
-	pdc_ata_setup_port(&host->ports[0]->ioaddr, mmio_base + 0x17c0);
-	host->ports[0]->ioaddr.bmdma_addr = mmio_base + 0x1000;
-	pdc_ata_setup_port(&host->ports[1]->ioaddr, mmio_base + 0x15c0);
-	host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x1008;
+	for (i = 0; i < 2; i++) {
+		struct ata_port *ap = host->ports[i];
+
+		pdc_ata_setup_port(&ap->ioaddr, mmio_base + cmd_offset[i]);
+		ap->ioaddr.bmdma_addr = mmio_base + bmdma_offset[i];
+
+		ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio");
+		ata_port_pbar_desc(ap, PDC_MMIO_BAR, cmd_offset[i], "cmd");
+	}
 
 	//pci_enable_intx(pdev);
 
Index: work/drivers/ata/pata_platform.c
===================================================================
--- work.orig/drivers/ata/pata_platform.c
+++ work/drivers/ata/pata_platform.c
@@ -212,6 +212,10 @@ static int __devinit pata_platform_probe
 	pp_info = (struct pata_platform_info *)(pdev->dev.platform_data);
 	pata_platform_setup_port(&ap->ioaddr, pp_info);
 
+	ata_port_desc(ap, "%s cmd 0x%llx ctl 0x%llx", mmio ? "mmio" : "ioport",
+		      (unsigned long long)io_res->start,
+		      (unsigned long long)ctl_res->start);
+
 	/* activate */
 	return ata_host_activate(host, platform_get_irq(pdev, 0),
 				 ata_interrupt, pp_info ? pp_info->irq_flags
Index: work/drivers/ata/pata_qdi.c
===================================================================
--- work.orig/drivers/ata/pata_qdi.c
+++ work/drivers/ata/pata_qdi.c
@@ -238,6 +238,7 @@ static struct ata_port_operations qdi658
 
 static __init int qdi_init_one(unsigned long port, int type, unsigned long io, int irq, int fast)
 {
+	unsigned long ctl = io + 0x206;
 	struct platform_device *pdev;
 	struct ata_host *host;
 	struct ata_port *ap;
@@ -254,7 +255,7 @@ static __init int qdi_init_one(unsigned 
 
 	ret = -ENOMEM;
 	io_addr = devm_ioport_map(&pdev->dev, io, 8);
-	ctl_addr = devm_ioport_map(&pdev->dev, io + 0x206, 1);
+	ctl_addr = devm_ioport_map(&pdev->dev, ctl, 1);
 	if (!io_addr || !ctl_addr)
 		goto fail;
 
@@ -279,6 +280,8 @@ static __init int qdi_init_one(unsigned 
 	ap->ioaddr.ctl_addr = ctl_addr;
 	ata_std_ports(&ap->ioaddr);
 
+	ata_port_desc(ap, "cmd %lx ctl %lx", io, ctl);
+
 	/*
 	 *	Hook in a private data structure per channel
 	 */
Index: work/drivers/ata/pata_scc.c
===================================================================
--- work.orig/drivers/ata/pata_scc.c
+++ work/drivers/ata/pata_scc.c
@@ -1193,6 +1193,9 @@ static int scc_init_one (struct pci_dev 
 		return rc;
 	host->iomap = pcim_iomap_table(pdev);
 
+	ata_port_pbar_desc(host->ports[0], SCC_CTRL_BAR, -1, "ctrl");
+	ata_port_pbar_desc(host->ports[0], SCC_BMID_BAR, -1, "bmid");
+
 	rc = scc_host_init(host);
 	if (rc)
 		return rc;
Index: work/drivers/ata/pata_winbond.c
===================================================================
--- work.orig/drivers/ata/pata_winbond.c
+++ work/drivers/ata/pata_winbond.c
@@ -199,6 +199,7 @@ static __init int winbond_init_one(unsig
 
 	for (i = 0; i < 2 ; i ++) {
 		unsigned long cmd_port = 0x1F0 - (0x80 * i);
+		unsigned long ctl_port = cmd_port + 0x206;
 		struct ata_host *host;
 		struct ata_port *ap;
 		void __iomem *cmd_addr, *ctl_addr;
@@ -214,14 +215,16 @@ static __init int winbond_init_one(unsig
 		host = ata_host_alloc(&pdev->dev, 1);
 		if (!host)
 			goto err_unregister;
+		ap = host->ports[0];
 
 		rc = -ENOMEM;
 		cmd_addr = devm_ioport_map(&pdev->dev, cmd_port, 8);
-		ctl_addr = devm_ioport_map(&pdev->dev, cmd_port + 0x0206, 1);
+		ctl_addr = devm_ioport_map(&pdev->dev, ctl_port, 1);
 		if (!cmd_addr || !ctl_addr)
 			goto err_unregister;
 
-		ap = host->ports[0];
+		ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", cmd_port, ctl_port);
+
 		ap->ops = &winbond_port_ops;
 		ap->pio_mask = 0x1F;
 		ap->flags |= ATA_FLAG_SLAVE_POSS;
Index: work/drivers/ata/pdc_adma.c
===================================================================
--- work.orig/drivers/ata/pdc_adma.c
+++ work/drivers/ata/pdc_adma.c
@@ -652,9 +652,16 @@ static int adma_ata_init_one(struct pci_
 	if (rc)
 		return rc;
 
-	for (port_no = 0; port_no < ADMA_PORTS; ++port_no)
-		adma_ata_setup_port(&host->ports[port_no]->ioaddr,
-				    ADMA_ATA_REGS(mmio_base, port_no));
+	for (port_no = 0; port_no < ADMA_PORTS; ++port_no) {
+		struct ata_port *ap = host->ports[port_no];
+		void __iomem *port_base = ADMA_ATA_REGS(mmio_base, port_no);
+		unsigned int offset = port_base - mmio_base;
+
+		adma_ata_setup_port(&ap->ioaddr, port_base);
+
+		ata_port_pbar_desc(ap, ADMA_MMIO_BAR, -1, "mmio");
+		ata_port_pbar_desc(ap, ADMA_MMIO_BAR, offset, "port");
+	}
 
 	/* initialize adapter */
 	adma_host_init(host, board_idx);
Index: work/drivers/ata/sata_inic162x.c
===================================================================
--- work.orig/drivers/ata/sata_inic162x.c
+++ work/drivers/ata/sata_inic162x.c
@@ -693,16 +693,24 @@ static int inic_init_one(struct pci_dev 
 	host->iomap = iomap = pcim_iomap_table(pdev);
 
 	for (i = 0; i < NR_PORTS; i++) {
-		struct ata_ioports *port = &host->ports[i]->ioaddr;
-		void __iomem *port_base = iomap[MMIO_BAR] + i * PORT_SIZE;
+		struct ata_port *ap = host->ports[i];
+		struct ata_ioports *port = &ap->ioaddr;
+		unsigned int offset = i * PORT_SIZE;
 
 		port->cmd_addr = iomap[2 * i];
 		port->altstatus_addr =
 		port->ctl_addr = (void __iomem *)
 			((unsigned long)iomap[2 * i + 1] | ATA_PCI_CTL_OFS);
-		port->scr_addr = port_base + PORT_SCR;
+		port->scr_addr = iomap[MMIO_BAR] + offset + PORT_SCR;
 
 		ata_std_ports(port);
+
+		ata_port_pbar_desc(ap, MMIO_BAR, -1, "mmio");
+		ata_port_pbar_desc(ap, MMIO_BAR, offset, "port");
+		ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx",
+		  (unsigned long long)pci_resource_start(pdev, 2 * i),
+		  (unsigned long long)pci_resource_start(pdev, (2 * i + 1)) |
+				      ATA_PCI_CTL_OFS);
 	}
 
 	hpriv->cached_hctl = readw(iomap[MMIO_BAR] + HOST_CTL);
Index: work/drivers/ata/sata_mv.c
===================================================================
--- work.orig/drivers/ata/sata_mv.c
+++ work/drivers/ata/sata_mv.c
@@ -2563,8 +2563,14 @@ static int mv_init_host(struct ata_host 
 	}
 
 	for (port = 0; port < host->n_ports; port++) {
+		struct ata_port *ap = host->ports[port];
 		void __iomem *port_mmio = mv_port_base(mmio, port);
-		mv_port_init(&host->ports[port]->ioaddr, port_mmio);
+		unsigned int offset = port_mmio - mmio;
+
+		mv_port_init(&ap->ioaddr, port_mmio);
+
+		ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio");
+		ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port");
 	}
 
 	for (hc = 0; hc < n_hc; hc++) {
Index: work/drivers/ata/sata_promise.c
===================================================================
--- work.orig/drivers/ata/sata_promise.c
+++ work/drivers/ata/sata_promise.c
@@ -1009,10 +1009,15 @@ static int pdc_ata_init_one (struct pci_
 
 	is_sataii_tx4 = pdc_is_sataii_tx4(pi->flags);
 	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
 		unsigned int ata_no = pdc_port_no_to_ata_no(i, is_sataii_tx4);
-		pdc_ata_setup_port(host->ports[i],
-				   base + 0x200 + ata_no * 0x80,
-				   base + 0x400 + ata_no * 0x100);
+		unsigned int port_offset = 0x200 + ata_no * 0x80;
+		unsigned int scr_offset = 0x400 + ata_no * 0x100;
+
+		pdc_ata_setup_port(ap, base + port_offset, base + scr_offset);
+
+		ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio");
+		ata_port_pbar_desc(ap, PDC_MMIO_BAR, port_offset, "port");
 	}
 
 	/* initialize adapter */
Index: work/drivers/ata/sata_qstor.c
===================================================================
--- work.orig/drivers/ata/sata_qstor.c
+++ work/drivers/ata/sata_qstor.c
@@ -637,9 +637,14 @@ static int qs_ata_init_one(struct pci_de
 		return rc;
 
 	for (port_no = 0; port_no < host->n_ports; ++port_no) {
-		void __iomem *chan =
-			host->iomap[QS_MMIO_BAR] + (port_no * 0x4000);
-		qs_ata_setup_port(&host->ports[port_no]->ioaddr, chan);
+		struct ata_port *ap = host->ports[port_no];
+		unsigned int offset = port_no * 0x4000;
+		void __iomem *chan = host->iomap[QS_MMIO_BAR] + offset;
+
+		qs_ata_setup_port(&ap->ioaddr, chan);
+
+		ata_port_pbar_desc(ap, QS_MMIO_BAR, -1, "mmio");
+		ata_port_pbar_desc(ap, QS_MMIO_BAR, offset, "port");
 	}
 
 	/* initialize adapter */
Index: work/drivers/ata/sata_sil.c
===================================================================
--- work.orig/drivers/ata/sata_sil.c
+++ work/drivers/ata/sata_sil.c
@@ -686,7 +686,8 @@ static int sil_init_one (struct pci_dev 
 	mmio_base = host->iomap[SIL_MMIO_BAR];
 
 	for (i = 0; i < host->n_ports; i++) {
-		struct ata_ioports *ioaddr = &host->ports[i]->ioaddr;
+		struct ata_port *ap = host->ports[i];
+		struct ata_ioports *ioaddr = &ap->ioaddr;
 
 		ioaddr->cmd_addr = mmio_base + sil_port[i].tf;
 		ioaddr->altstatus_addr =
@@ -694,6 +695,9 @@ static int sil_init_one (struct pci_dev 
 		ioaddr->bmdma_addr = mmio_base + sil_port[i].bmdma;
 		ioaddr->scr_addr = mmio_base + sil_port[i].scr;
 		ata_std_ports(ioaddr);
+
+		ata_port_pbar_desc(ap, SIL_MMIO_BAR, -1, "mmio");
+		ata_port_pbar_desc(ap, SIL_MMIO_BAR, sil_port[i].tf, "tf");
 	}
 
 	/* initialize and activate */
Index: work/drivers/ata/sata_sil24.c
===================================================================
--- work.orig/drivers/ata/sata_sil24.c
+++ work/drivers/ata/sata_sil24.c
@@ -1110,12 +1110,15 @@ static int sil24_init_one(struct pci_dev
 	host->iomap = iomap;
 
 	for (i = 0; i < host->n_ports; i++) {
-		void __iomem *port = iomap[SIL24_PORT_BAR] + i * PORT_REGS_SIZE;
+		struct ata_port *ap = host->ports[i];
+		size_t offset = ap->port_no * PORT_REGS_SIZE;
+		void __iomem *port = iomap[SIL24_PORT_BAR] + offset;
 
 		host->ports[i]->ioaddr.cmd_addr = port;
 		host->ports[i]->ioaddr.scr_addr = port + PORT_SCONTROL;
 
-		ata_std_ports(&host->ports[i]->ioaddr);
+		ata_port_pbar_desc(ap, SIL24_HOST_BAR, -1, "host");
+		ata_port_pbar_desc(ap, SIL24_PORT_BAR, offset, "port");
 	}
 
 	/* configure and activate the device */
Index: work/drivers/ata/sata_svw.c
===================================================================
--- work.orig/drivers/ata/sata_svw.c
+++ work/drivers/ata/sata_svw.c
@@ -445,9 +445,15 @@ static int k2_sata_init_one (struct pci_
 	/* different controllers have different number of ports - currently 4 or 8 */
 	/* All ports are on the same function. Multi-function device is no
 	 * longer available. This should not be seen in any system. */
-	for (i = 0; i < host->n_ports; i++)
-		k2_sata_setup_port(&host->ports[i]->ioaddr,
-				   mmio_base + i * K2_SATA_PORT_OFFSET);
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+		unsigned int offset = i * K2_SATA_PORT_OFFSET;
+
+		k2_sata_setup_port(&ap->ioaddr, mmio_base + offset);
+
+		ata_port_pbar_desc(ap, 5, -1, "mmio");
+		ata_port_pbar_desc(ap, 5, offset, "port");
+	}
 
 	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
 	if (rc)
Index: work/drivers/ata/sata_sx4.c
===================================================================
--- work.orig/drivers/ata/sata_sx4.c
+++ work/drivers/ata/sata_sx4.c
@@ -1383,9 +1383,8 @@ static int pdc_sata_init_one (struct pci
 	const struct ata_port_info *ppi[] =
 		{ &pdc_port_info[ent->driver_data], NULL };
 	struct ata_host *host;
-	void __iomem *base;
 	struct pdc_host_priv *hpriv;
-	int rc;
+	int i, rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
@@ -1411,11 +1410,17 @@ static int pdc_sata_init_one (struct pci
 		return rc;
 	host->iomap = pcim_iomap_table(pdev);
 
-	base = host->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS;
-	pdc_sata_setup_port(&host->ports[0]->ioaddr, base + 0x200);
-	pdc_sata_setup_port(&host->ports[1]->ioaddr, base + 0x280);
-	pdc_sata_setup_port(&host->ports[2]->ioaddr, base + 0x300);
-	pdc_sata_setup_port(&host->ports[3]->ioaddr, base + 0x380);
+	for (i = 0; i < 4; i++) {
+		struct ata_port *ap = host->ports[i];
+		void __iomem *base = host->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS;
+		unsigned int offset = 0x200 + i * 0x80;
+
+		pdc_sata_setup_port(&ap->ioaddr, base + offset);
+
+		ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio");
+		ata_port_pbar_desc(ap, PDC_DIMM_BAR, -1, "dimm");
+		ata_port_pbar_desc(ap, PDC_MMIO_BAR, offset, "port");
+	}
 
 	/* configure and activate */
 	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
Index: work/drivers/ata/sata_uli.c
===================================================================
--- work.orig/drivers/ata/sata_uli.c
+++ work/drivers/ata/sata_uli.c
@@ -242,6 +242,12 @@ static int uli_init_one (struct pci_dev 
 		hpriv->scr_cfg_addr[2] = ULI5287_BASE + ULI5287_OFFS*4;
 		ata_std_ports(ioaddr);
 
+		ata_port_desc(host->ports[2],
+			"cmd 0x%llx ctl 0x%llx bmdma 0x%llx",
+			(unsigned long long)pci_resource_start(pdev, 0) + 8,
+			((unsigned long long)pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS) + 4,
+			(unsigned long long)pci_resource_start(pdev, 4) + 16);
+
 		ioaddr = &host->ports[3]->ioaddr;
 		ioaddr->cmd_addr = iomap[2] + 8;
 		ioaddr->altstatus_addr =
@@ -250,6 +256,13 @@ static int uli_init_one (struct pci_dev 
 		ioaddr->bmdma_addr = iomap[4] + 24;
 		hpriv->scr_cfg_addr[3] = ULI5287_BASE + ULI5287_OFFS*5;
 		ata_std_ports(ioaddr);
+
+		ata_port_desc(host->ports[2],
+			"cmd 0x%llx ctl 0x%llx bmdma 0x%llx",
+			(unsigned long long)pci_resource_start(pdev, 2) + 9,
+			((unsigned long long)pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS) + 4,
+			(unsigned long long)pci_resource_start(pdev, 4) + 24);
+
 		break;
 
 	case uli_5289:
Index: work/drivers/ata/sata_via.c
===================================================================
--- work.orig/drivers/ata/sata_via.c
+++ work/drivers/ata/sata_via.c
@@ -407,6 +407,9 @@ static void vt6421_init_addrs(struct ata
 	ioaddr->scr_addr = vt6421_scr_addr(iomap[5], ap->port_no);
 
 	ata_std_ports(ioaddr);
+
+	ata_port_pbar_desc(ap, ap->port_no, -1, "port");
+	ata_port_pbar_desc(ap, 4, ap->port_no * 8, "bmdma");
 }
 
 static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
Index: work/drivers/ata/sata_vsc.c
===================================================================
--- work.orig/drivers/ata/sata_vsc.c
+++ work/drivers/ata/sata_vsc.c
@@ -408,9 +408,15 @@ static int __devinit vsc_sata_init_one (
 
 	mmio_base = host->iomap[VSC_MMIO_BAR];
 
-	for (i = 0; i < host->n_ports; i++)
-		vsc_sata_setup_port(&host->ports[i]->ioaddr,
-				    mmio_base + (i + 1) * VSC_SATA_PORT_OFFSET);
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+		unsigned int offset = (i + 1) * VSC_SATA_PORT_OFFSET;
+
+		vsc_sata_setup_port(&ap->ioaddr, mmio_base + offset);
+
+		ata_port_pbar_desc(ap, VSC_MMIO_BAR, -1, "mmio");
+		ata_port_pbar_desc(ap, VSC_MMIO_BAR, offset, "port");
+	}
 
 	/*
 	 * Use 32 bit DMA mask, because 64 bit address support is poor.
Index: work/include/linux/libata.h
===================================================================
--- work.orig/include/linux/libata.h
+++ work/include/linux/libata.h
@@ -360,8 +360,6 @@ struct ata_ioports {
 struct ata_host {
 	spinlock_t		lock;
 	struct device 		*dev;
-	unsigned long		irq;
-	unsigned long		irq2;
 	void __iomem * const	*iomap;
 	unsigned int		n_ports;
 	void			*private_data;
@@ -935,6 +933,16 @@ static inline void ata_ehi_hotplugged(st
 }
 
 /*
+ * port description helpers
+ */
+extern void ata_port_desc(struct ata_port *ap, const char *fmt, ...)
+	__attribute__ ((format (printf, 2, 3)));
+#ifdef CONFIG_PCI
+extern void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset,
+			       const char *name);
+#endif
+
+/*
  * qc helpers
  */
 static inline int
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux