On Thursday 02 August 2007, Alan Cox wrote:
> > hdd: reading: block=78165360, sectors=1, buffer=0xc1e63000
> > hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> > hdd: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=78165360,
>
> Ok this one does look like its actually a specific drive firmware error
>
> > ide1: reset: master: error (0x00?)
> > ide1: start_request: current=0xc1e0b408
>
> and the drive then shits itself in style. Bart's right - this drive does
> need a blacklisting. Presumably thats why it shipped with a default HPA
> to clip the non-sector
Mikko, please verify that the following patch fixes the issue.
[PATCH] ide-disk: workaround for buggy HPA support on ST340823A (take 2)
This disk reports total number of sectors instead of maximum sector address
in response to READ_NATIVE_MAX_ADDRESS command and also happily accepts
SET_MAX_ADDRESS command with the bogus value. This results in +1 sector
capacity being used and errors on attempts to use the last sector.
...
hdd: Host Protected Area detected.
current capacity is 78165360 sectors (40020 MB)
native capacity is 78165361 sectors (40020 MB)
hdd: Host Protected Area disabled.
...
hdd: reading: block=78165360, sectors=1, buffer=0xc1e63000
hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=78165360, sector=78165360
...
Add hpa_list[] table and workaround the issue in idedisk_check_hpa().
Fixes kernel bugzilla bug #8816.
Thanks to Mikko for investigating the issue and testing this patch.
v2:
* Add missing export and improve patch description a bit.
Cc: Mikko Rapeli <mikko.rapeli@xxxxxx>
Cc: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
This patch depends on CONFIG_BLK_DEV_IDEDMA=y but for testing purposes
it is OK. Final version wouldn't depend on CONFIG_BLK_DEV_IDEDMA,
"[PATCH] ide: add cable detection for early UDMA66 devices (take 3)"
which is in IDE quilt tree moves ide_in_drive_list() out of ide-dma.c.
drivers/ide/ide-disk.c | 17 +++++++++++++++++
drivers/ide/ide-dma.c | 2 ++
2 files changed, 19 insertions(+)
Index: b/drivers/ide/ide-disk.c
===================================================================
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -481,6 +481,14 @@ static inline int idedisk_supports_lba48
&& id->lba_capacity_2;
}
+/*
+ * Some disks report total number of sectors instead of
+ * maximum sector address. We list them here.
+ */
+static const struct drive_list_entry hpa_list[] = {
+ { "ST340823A", NULL },
+};
+
static void idedisk_check_hpa(ide_drive_t *drive)
{
unsigned long long capacity, set_max;
@@ -492,6 +500,15 @@ static void idedisk_check_hpa(ide_drive_
else
set_max = idedisk_read_native_max_address(drive);
+ if (ide_in_drive_list(drive->id, hpa_list)) {
+ /*
+ * Since we are inclusive wrt to firmware revisions do this
+ * extra check and apply the workaround only when needed.
+ */
+ if (set_max == capacity + 1)
+ set_max--;
+ }
+
if (set_max <= capacity)
return;
Index: b/drivers/ide/ide-dma.c
===================================================================
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -153,6 +153,8 @@ int ide_in_drive_list(struct hd_driveid
return 0;
}
+EXPORT_SYMBOL_GPL(ide_in_drive_list);
+
/**
* ide_dma_intr - IDE DMA interrupt handler
* @drive: the drive the interrupt is for
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
