Need to probe slave device first to make it release PDIAG-
(this is required for correct device side cable detection).
Based on libata commit f31f0cc2f0b7527072d94d02da332d9bb8d7d94c.
Thanks to Craig for testing this patch.
Cc: Craig Block <chblock3@xxxxxxxxx>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
I just noticed that previously I sent it only in PM to Craig.
drivers/ide/ide-iops.c | 1 -
drivers/ide/ide-probe.c | 7 +++----
2 files changed, 3 insertions(+), 5 deletions(-)
Index: b/drivers/ide/ide-iops.c
===================================================================
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -612,7 +612,6 @@ u8 eighty_ninty_three (ide_drive_t *driv
/*
* FIXME:
- * - change master/slave IDENTIFY order
* - force bit13 (80c cable present) check also for !ivb devices
* (unless the slave device is pre-ATA3)
*/
Index: b/drivers/ide/ide-probe.c
===================================================================
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -719,9 +719,9 @@ EXPORT_SYMBOL_GPL(ide_undecoded_slave);
*/
static void probe_hwif(ide_hwif_t *hwif, void (*fixup)(ide_hwif_t *hwif))
{
- unsigned int unit;
unsigned long flags;
unsigned int irqd;
+ int unit;
if (hwif->noprobe)
return;
@@ -777,10 +777,9 @@ static void probe_hwif(ide_hwif_t *hwif,
printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name);
/*
- * Second drive should only exist if first drive was found,
- * but a lot of cdrom drives are configured as single slaves.
+ * Need to probe slave device first to make it release PDIAG-.
*/
- for (unit = 0; unit < MAX_DRIVES; ++unit) {
+ for (unit = MAX_DRIVES - 1; unit >= 0; unit--) {
ide_drive_t *drive = &hwif->drives[unit];
drive->dn = (hwif->channel ? 2 : 0) + unit;
(void) probe_for_drive(drive);
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
