-------------- Original message ---------------------- From: Tejun Heo <htejun@xxxxxxxxx> > Hello, > > Luiz Fernando N. Capitulino wrote: > > Hi there, > > > > A Mandriva user is reporting that his machine hangs while booting > > kernels 2.6.22.1 and 2.6.23-rc1. > > > > But boots fine with 2.6.21. > > > > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > > ata1.00: qc timeout (cmd 0x27) > > ata1.00: ata_hpa_resize 1: hpa sectors (0) is smaller than sectors (781422768) > > ata1.00: ATA-7: HDS724040KLSA80, KFAOA20N, max UDMA/133 > > ata1.00: 781422768 sectors, multi 8: LBA48 > > ata1.00: failed to set xfermode (err_mask=0x40) > > ata1: failed to recover some devices, retrying in 5 secs > > What happens after this? > It basically retries a few times, then fails to boot. Here is a more complete log with 2.6.23-rc1: ata1: SATA max UDMA/133 cmd 0xf881ad00 ctl 0x00000000 bmdma 0x00000000 irq 18^M ata2: SATA max UDMA/133 cmd 0xf881ad80 ctl 0x00000000 bmdma 0x00000000 irq 18^M ata3: SATA max UDMA/133 cmd 0xf881ae00 ctl 0x00000000 bmdma 0x00000000 irq 18^M ata4: SATA max UDMA/133 cmd 0xf881ae80 ctl 0x00000000 bmdma 0x00000000 irq 18^M ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)^M ata1.00: qc timeout (cmd 0x27)^M ata1.00: ata_hpa_resize 1: hpa sectors (0) is smaller than sectors (781422768)^M ata1.00: ATA-7: HDS724040KLSA80, KFAOA20N, max UDMA/133^M ata1.00: 781422768 sectors, multi 8: LBA48 ^M ata1.00: failed to set xfermode (err_mask=0x40)^M ata1: failed to recover some devices, retrying in 5 secs^M ata1: port is slow to respond, please be patient (Status 0x80)^M ata1: COMRESET failed (errno=-16)^M ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)^M ata1.00: qc timeout (cmd 0x27)^M ata1.00: ata_hpa_resize 1: hpa sectors (0) is smaller than sectors (781422768)^M ata1.00: configured for UDMA/133^M ata1: EH pending after completion, repeating EH (cnt=4)^M ata1: soft resetting port^M ata1: failed to reset engine (errno=-95)<6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)^M ata1.00: qc timeout (cmd 0xec)^M ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)^M ata1.00: revalidation failed (errno=-5)^M ata1: failed to recover some devices, retrying in 5 secs^M ata1: hard resetting port^M ata1: port is slow to respond, please be patient (Status 0x80)^M ata1: COMRESET failed (errno=-16)^M ata1: hard resetting port^M ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)^M ata1.00: qc timeout (cmd 0x27)^M ata1.00: ata_hpa_resize 1: hpa sectors (0) is smaller than sectors (781422768)^M ata1.00: failed to set xfermode (err_mask=0x40)^M ata1: limiting SATA link speed to 1.5 Gbps^M ata1.00: limiting speed to UDMA/133:PIO3^M ata1: failed to recover some devices, retrying in 5 secs^M ata1: hard resetting port^M ata1: port is slow to respond, please be patient (Status 0x80)^M ata1: COMRESET failed (errno=-16)^M ata1: hard resetting port^M ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)^M ata1.00: qc timeout (cmd 0x27)^M ata1.00: ata_hpa_resize 1: hpa sectors (0) is smaller than sectors (781422768)^M ata1.00: failed to set xfermode (err_mask=0x40)^M ata1.00: disabled^M ata1: EH pending after completion, repeating EH (cnt=3)^M ata1: soft resetting port^M ata1: failed to reset engine (errno=-95)<6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)^M ata1: EH complete^M ata2: SATA link down (SStatus 0 SControl 300)^M ata3: SATA link down (SStatus 0 SControl 300)^M ata4: SATA link down (SStatus 0 SControl 300)^M Loading ata_piixACPI: PCI Interrupt 0000:00:1f.1[A] -> .ko module^M GSI 16 (level, low) -> IRQ 16^M scsi4 : ata_piix^M scsi5 : ata_piix^M ata5: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14^M ata6: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15^M ata5.00: ATAPI: GCR-8483B, 1.09, max UDMA/33^M ata5.01: ATAPI: PHILIPS DVD+/-RW DVD8631, GD30, max UDMA/33^M ata5.00: configured for UDMA/33^M ata5.01: configured for UDMA/33^M scsi 4:0:0:0: CD-ROM HL-DT-ST CD-ROM GCR-8483B 1.09 PQ: 0 ANSI: 5^M scsi 4:0:1:0: CD-ROM PHILIPS DVD+-RW DVD8631 GD30 PQ: 0 ANSI: 5^M Loading sd_mod.ko module^M Loading jbd.ko module^MKernel panic - not syncing: Attempted to kill init!^M Loading ext3.ko module^M Mounting /proc filesystem^M Mounting sys - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
