Linux IDE Archive
[Prev Page][Next Page]
- Re: [PATCH] ide: add ide_set{_max}_pio() (take 2)
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] ide: add ide_set{_max}_pio() (take 2)
- Re: [PATCH] ide: add ide_set{_max}_pio() (take 2)
- Re: [PATCH 13/15] ide: add ata_set{_max}_pio()
- [PATCH] ide: add ide_set{_max}_pio() (take 2)
- From: Bartlomiej Zolnierkiewicz
- [PATCH] ide: add ide_pio_cycle_time() helper (take 2)
- From: Bartlomiej Zolnierkiewicz
- [PATCH] ide: add ide_dev_has_iordy() helper (take 4)
- From: Bartlomiej Zolnierkiewicz
- Re: device error via SDB FIS
- Re: device error via SDB FIS
- Re: device error via SDB FIS
- Re: device error via SDB FIS
- Re: device error via SDB FIS
- Re: device error via SDB FIS
- Re: [PATCH 13/15] ide: add ata_set{_max}_pio()
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 13/15] ide: add ata_set{_max}_pio()
- Re: [PATCH 13/15] ide: add ata_set{_max}_pio()
- From: Bartlomiej Zolnierkiewicz
- Re: SATA/ADMA TIMEOUTS, dmesg output
- Re: [PATCH 5/15] ide: add ata_pio_cycle_time() helper
- Re: [PATCH 9/15] ide: add PIO masks
- Re: [PATCH 13/15] ide: add ata_set{_max}_pio()
- [PATCH 15/15] ide: remove stale changelog from setup-pci.c
- From: Bartlomiej Zolnierkiewicz
- [PATCH 14/15] ide: remove stale changelog/comments/TODO from ide.c
- From: Bartlomiej Zolnierkiewicz
- [PATCH 13/15] ide: add ata_set{_max}_pio()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 12/15] alim15x3: ->speedproc, filter out invalid modes passed from user-space
- From: Bartlomiej Zolnierkiewicz
- [PATCH 11/15] atiixp: ->speedproc, filter out invalid modes passed from user-space
- From: Bartlomiej Zolnierkiewicz
- [PATCH 10/15] ide-cris: handle PIO auto-tuning in tune_cris_ide()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 9/15] ide: add PIO masks
- From: Bartlomiej Zolnierkiewicz
- [PATCH 8/15] ide: remove ide_find_best_pio_mode()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 7/15] ide: drop "PIO data" argument from ide_get_best_pio_mode()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 6/15] ide: ide_find_best_pio_mode() fixes
- From: Bartlomiej Zolnierkiewicz
- [PATCH 5/15] ide: add ata_pio_cycle_time() helper
- From: Bartlomiej Zolnierkiewicz
- [PATCH 4/15] sc1200: remove stale Power Management code
- From: Bartlomiej Zolnierkiewicz
- [PATCH 3/15] ide: ide_start_power_step() fix WRT disabling DMA
- From: Bartlomiej Zolnierkiewicz
- [PATCH 2/15] serverworks: fix DMA
- From: Bartlomiej Zolnierkiewicz
- [PATCH 1/15] serverworks: always tune PIO
- From: Bartlomiej Zolnierkiewicz
- Re: device error via SDB FIS
- device error via SDB FIS
- [PATCH 2.6.22-rc6] add PCI-ID for Adaptec 1430SA 4-Port SATA Controller
- From: Florian Attenberger
- Re: PROBLEM: SATA AHCI driver significant throughput loss in 2.6.22-rc5-g75154f40-dirty
- [PATCH 2.6.22-rc6+mboxjeff 3/3] sata_sis: fixed handling for IDE-emulation of ID 1183
- [PATCH 2.6.22-rc6+mboxjeff 2/3] pata_sis: new PCI ID
- [PATCH 2.6.22-rc6+mboxjeff 1/3] pata_sis: compilation fix
- Re: [PATCH 5/6] ide: add ata_dev_has_iordy() helper
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 3/6] siimage: PIO mode setup fixes
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH pata-2.6] hpt366: simplify UltraDMA filtering (take 4)
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH pata-2.6 fix] hpt366: use correct enablebits for HPT36x
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] hpt366: blacklist MAXTOR STM3320620A for UltraDMA/66
- From: Bartlomiej Zolnierkiewicz
- Re: [1/2] 2.6.22-rc6: known regressions v2
- Re: [PATCH 5/6] ide: add ata_dev_has_iordy() helper
- [PATCH pata-2.6] hpt366: simplify UltraDMA filtering (take 4)
- [PATCH pata-2.6 fix] hpt366: use correct enablebits for HPT36x
- [PATCH] hpt366: blacklist MAXTOR STM3320620A for UltraDMA/66
- Re: [BUG] ide dma_timer_expiry, then hard lockup
- Re: [PATCH] pata_hpt3x3: support this chip properly including alternative BAR layout
- Re: [1/2] 2.6.22-rc6: known regressions v2
- [PATCH] pata_hpt3x3: support this chip properly including alternative BAR layout
- Re: [1/2] 2.6.22-rc6: known regressions v2
- Re: [1/2] 2.6.22-rc6: known regressions v2
- Re: [1/2] 2.6.22-rc6: known regressions v2
- Re: [1/2] 2.6.22-rc6: known regressions v2
- Re: [1/2] 2.6.22-rc6: known regressions v2
- Re: [1/2] 2.6.22-rc6: known regressions v2
- Re: PROBLEM: ata_piix.c for the ICH5 SATA Controller.
- [1/2] 2.6.22-rc6: known regressions v2
- Re: PROBLEM: ata_piix.c for the ICH5 SATA Controller.
- Re: [patch 2.6.22-rc6] ATA: add a PCI ID for Intel Santa Rosa PATA controller
- Re: PROBLEM: SATA AHCI driver significant throughput loss in 2.6.22-rc5-g75154f40-dirty
- Re: PROBLEM: ata_piix.c for the ICH5 SATA Controller.
- Re: [PATCH 2.6.22-rc4] libata: SiS180 pata support
- Re: CF flash PATA on libata failure to attach
- Re: CF flash PATA on libata failure to attach
- State of Port Multiplier Support in libata?
- RE: CF flash PATA on libata failure to attach
- RE: CF flash PATA on libata failure to attach
- [PATCH] sata_inic162x: disable LBA48 devices
- Re: CF flash PATA on libata failure to attach
- Re: CF flash PATA on libata failure to attach
- RE: CF flash PATA on libata failure to attach
- Re: CF flash PATA on libata failure to attach
- Re: [PATCH 2.6.22-rc6] sata_inic162x: add big fat warning about broken LBA48 support
- Re: [PATCH 2.6.22-rc6] sata_inic162x: add big fat warning about broken LBA48 support
- Re: CF flash PATA on libata failure to attach
- [PATCH -mm] sata_nv: allow changing queue depth
- RE: CF flash PATA on libata failure to attach
- Re: [PATCH 2.6.22-rc4] libata: SiS180 pata support
- Re: [PATCH 2.6.22-rc4] libata: SiS180 pata support
- Re: [PATCH 2.6.22-rc4] libata: SiS180 pata support
- [patch 2.6.22-rc6] ATA: add a PCI ID for Intel Santa Rosa PATA controller
- ATA: add a PCI ID for Intel Santa Rosa PATA controller
- Re: [PATCH 2.6.22-rc6] sata_inic162x: add big fat warning about broken LBA48 support
- Re: [PATCH 2.6.22-rc6] sata_inic162x: add big fat warning about broken LBA48 support
- Re: [PATCH 2.6.22-rc6] sata_inic162x: add big fat warning about broken LBA48 support
- Re: [PATCH 2.6.22-rc6] sata_inic162x: add big fat warning about broken LBA48 support
- Re: PROBLEM: ata_piix.c for the ICH5 SATA Controller.
- Re: CF flash PATA on libata failure to attach
- Re: [PATCH 2.6.22-rc6] sata_inic162x: add big fat warning about broken LBA48 support
- Re: [PATCH 2.6.22-rc6] sata_inic162x: add big fat warning about broken LBA48 support
- Re: [PATCH 2.6.22-rc6] sata_inic162x: add big fat warning about broken LBA48 support
- Re: [PATCH 2.6.22-rc6] sata_inic162x: add big fat warning about broken LBA48 support
- [PATCH 2.6.22-rc6] sata_inic162x: add big fat warning about broken LBA48 support
- Re: [git patches] libata fixes
- PROBLEM: ata_piix.c for the ICH5 SATA Controller.
- Re: Some NCQ numbers...
- Some NCQ numbers...
- [PATCH 2.6.22-rc6] libata: remove reading alt_status from ata_hsm_qc_complete()
- RE: CF flash PATA on libata failure to attach
- Re: [PATCH 5/6] ide: add ata_dev_has_iordy() helper
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 5/6] ide: add ata_dev_has_iordy() helper
- PREEMPT bug? (was: Re: [PROBLEM]: hdparm strange behaviour for 2.6.21 and later)
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 4/5] sis5513: backport short cables support from pata_sis.c
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 2/5] piix: backport short cables support from ata_piix.c
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 5/6] ide: add ata_dev_has_iordy() helper
- From: Bartlomiej Zolnierkiewicz
- Re: Failed to IDENTIFY SATA harddrive on sata_sil24
- Re: [git patches] libata fixes
- Failed to IDENTIFY SATA harddrive on sata_sil24
- Re: CF flash PATA on libata failure to attach
- Re: Linux Software RAID is really RAID?
- Re: [git patches] libata fixes
- Re: is Promise TX4302 supported?
- Re: [git patches] libata fixes
- [git patches] libata fixes
- Re: [PATCH 1/3] libata: call ata_check_atapi_dma() with qc better prepared
- Re: [PATCH 2.6.22-rc5] libata: fix infinite EH waiting bug
- Re: [PATCH 2.6.22-rc5] libata: fix ata_dev_disable()
- Re: [PATCH] pata_it821x: fix section mismatch warning
- Re: [PATCH 2.6.22-rc5] libata: remove unused variable from ata_eh_reset()
- Re: [PATCH 2.6.22-rc5] libata: be less verbose about hpa
- Re: [PATCH 2.6.22-rc5] libata: kill non-sense warning message
- Re: [PATCH 2.6.22-rc5] libata: kill the infamous abnormal status message
- RE: CF flash PATA on libata failure to attach
- is Promise TX4302 supported?
- Re: ALPM on devices not supporting HIPM?
- From: Kristen Carlson Accardi
- Re: [2.6.22-rc6] NForce4 soft and hard resetting ports and exceptions
- Re: [PATCH 3/6] siimage: PIO mode setup fixes
- Re: [2.6.22-rc6] NForce4 soft and hard resetting ports and exceptions
- Re: CF flash PATA on libata failure to attach
- Re: [PATCH 4/5] sis5513: backport short cables support from pata_sis.c
- Re: [Fwd: promise-sata-pata, No release code PATA port on Promise PDC20579, TODO?]
- [2.6.22-rc6] NForce4 soft and hard resetting ports and exceptions
- Re: Linux Software RAID is really RAID?
- Re: [PATCH 2/5] piix: backport short cables support from ata_piix.c
- Re: [PATCH 3/5] alim15x3: backport short cables support from pata_ali.c
- Re: [PATCH 5/5] via82cxxx: backport short cables support from pata_via.c
- Re: Frequent SATA resets with sata_nv (fwd)
- From: Heinz Ulrich Stille
- [PATCH 3/3] libata: kill ATA_HORKAGE_DMA_RW_ONLY
- [PATCH] libata: use PIO for non-16 byte aligned ATAPI commands
- [PATCH 1/3] libata: call ata_check_atapi_dma() with qc better prepared
- Re: Frequent SATA resets with sata_nv (fwd)
- From: Matthew "Cheetah" Gabeler-Lee
- Re: [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
- From: Kristen Carlson Accardi
- Re: SATA update in 2.4, ICH8
- Re: [RFT] hpt366: reset DMA state machine on timeouts
- Re: SATA update in 2.4, ICH8
- Re: SATA update in 2.4, ICH8
- CF flash PATA on libata failure to attach
- [PATCH 1/1] libata: pata_pdc2027x PLL input clock fix
- Re: ide/dma not working from 2.6.19 to 2.6.21
- Re: libata questions
- Re: [PATCH] pata_it821x: fix section mismatch warning
- pata_ali patch not merged?
- Re: [RFT] hpt366: reset DMA state machine on timeouts
- Re: libata questions
- [PATCH 2.6.22-rc4]: libata: PATA-mode fixes for sis_sata; resubmission
- [Fwd: Re: libata and legacy ide pcmcia failure]
- Another SATA device with spurious NCQ completions
- [PATCH] pata_it821x: fix section mismatch warning
- Re: Porblem in sata_sil24
- Re: Porblem in sata_sil24
- [PATCH 2.6.22-rc5] libata: fix ata_dev_disable()
- [PATCH 2.6.22-rc5] libata: fix infinite EH waiting bug
- [PATCH 2.6.22-rc5] libata: remove unused variable from ata_eh_reset()
- Re: [PATCH 2.6.22-rc5] libata: kill the infamous abnormal status message
- [PATCH 2.6.22-rc5] libata: kill the infamous abnormal status message
- Re: [PATCH 2.6.22-rc5] libata: be less verbose about hpa
- [PATCH 2.6.22-rc5] libata: kill non-sense warning message
- Re: [PATCH 2.6.22-rc5] libata: be less verbose about hpa
- [PATCH 2.6.22-rc5] libata: be less verbose about hpa
- Re: libata and legacy ide pcmcia failure
- [1/2] 2.6.22-rc6: known regressions
- Re: libata and legacy ide pcmcia failure
- Re: SATA update in 2.4, ICH8
- RE: CF flash IDE failure to attach with 2.6.20+
- Re: ide/dma not working from 2.6.19 to 2.6.21
- Re: libata interface fatal error
- From: Florian Effenberger
- Re: ide/dma not working from 2.6.19 to 2.6.21
- Re: 2.6.22-rc5 libata/ata_piix failure with older CDROM
- Re: [PATCH 2.6.22-rc5] libata: add HTS541616J9SA00 to NCQ blacklist
- Re: [PATCH 2.6.22-rc5] libata: add HTS541616J9SA00 to NCQ blacklist
- Re: [PATCH 2.6.22-rc5] libata: add HTS541616J9SA00 to NCQ blacklist
- Re: [PATCH 2.6.22-rc5] libata: add HTS541616J9SA00 to NCQ blacklist
- Re: [PATCH 2.6.22-rc5] libata: add HTS541616J9SA00 to NCQ blacklist
- Re: libata and legacy ide pcmcia failure
- Re: [PATCH 2.6.22-rc5] libata: add HTS541616J9SA00 to NCQ blacklist
- Re: libata interface fatal error
- Re: [PATCH 2.6.22-rc5] libata: add HTS541616J9SA00 to NCQ blacklist
- [PATCH 2.6.22-rc5] libata: add HTS541616J9SA00 to NCQ blacklist
- Re: hsm violation
- Re: hsm violation
- Re: SATA RAID5 speed drop of 100 MB/s
- Re: SATA RAID5 speed drop of 100 MB/s
- Re: SATA RAID5 speed drop of 100 MB/s
- Re: sata_promise disk error 2.6.22-rc5 with hrt1 patch
- Re: Frequent SATA resets with sata_nv (fwd)
- Re: hsm violation
- Re: hsm violation
- Re: [PROBLEM]: hdparm strange behaviour for 2.6.21 and later
- Re: [PATCH 6/6] ide: add ide_pci_device_t.host_flags
- Re: SATA RAID5 speed drop of 100 MB/s
- Re: [PATCH 5/6] ide: add ata_dev_has_iordy() helper
- Re: SATA RAID5 speed drop of 100 MB/s
- Re: SATA RAID5 speed drop of 100 MB/s
- Re: SATA RAID5 speed drop of 100 MB/s
- Re: SATA RAID5 speed drop of 100 MB/s
- From: Dr. David Alan Gilbert
- [PATCH] libata: adding ICH8M PCIIDs to ATA_PIIX.
- Re: SATA RAID5 speed drop of 100 MB/s
- Re: libata interface fatal error
- From: Florian Effenberger
- Re: SATA RAID5 speed drop of 100 MB/s
- Re: SATA RAID5 speed drop of 100 MB/s
- Re: SATA RAID5 speed drop of 100 MB/s
- Re: [PATCH 6/6] ide: add ide_pci_device_t.host_flags
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 5/6] ide: add ata_dev_has_iordy() helper
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/6] qd65xx: fix PIO mode selection
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/6] qd65xx: fix PIO mode selection
- Re: [PATCH 1/6] qd65xx: fix PIO mode selection
- Re: [PATCH 5/6] ide: add ata_dev_has_iordy() helper
- Re: [PATCH 6/6] ide: add ide_pci_device_t.host_flags
- Re: [PATCH 4/6] ide: make ide_get_best_pio_mode() print info if overriding PIO mode
- Re: [PATCH] ide: Stop mapping ROMs
- Re: [PROBLEM]: hdparm strange behaviour for 2.6.21 and later
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/6] qd65xx: fix PIO mode selection
- Re: [RFT] hpt366: reset DMA state machine on timeouts
- [PATCH 6/6] ide: add ide_pci_device_t.host_flags
- From: Bartlomiej Zolnierkiewicz
- [PATCH 5/6] ide: add ata_dev_has_iordy() helper
- From: Bartlomiej Zolnierkiewicz
- [PATCH 4/6] ide: make ide_get_best_pio_mode() print info if overriding PIO mode
- From: Bartlomiej Zolnierkiewicz
- [PATCH 3/6] siimage: PIO mode setup fixes
- From: Bartlomiej Zolnierkiewicz
- [PATCH 2/6] atiixp: PIO mode setup fixes
- From: Bartlomiej Zolnierkiewicz
- [PATCH 1/6] qd65xx: fix PIO mode selection
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] ide: Stop mapping ROMs
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] ide: Stop mapping ROMs
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] ide: Fix a theoretical Ooops case
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] libata: Add pata_dma option so users can disable pata_dma as they can with old-ide
- From: Bartlomiej Zolnierkiewicz
- Re: SATA RAID5 speed drop of 100 MB/s
- From: Bartlomiej Zolnierkiewicz
- 2.6.22-rc5 libata/ata_piix failure with older CDROM
- Re: SATA RAID5 speed drop of 100 MB/s
- Re: how to handle pata_via when controller not in fully-pci-native mode (two irqs?)
- Re: how to handle pata_via when controller not in fully-pci-native mode (two irqs?)
- Re: how to handle pata_via when controller not in fully-pci-native mode (two irqs?)
- Re: how to handle pata_via when controller not in fully-pci-native mode (two irqs?)
- Re: SATA RAID5 speed drop of 100 MB/s
- Re: SATA RAID5 speed drop of 100 MB/s
- Re: how to handle pata_via when controller not in fully-pci-native mode (two irqs?)
- Re: [RFC: 2.6 patch] schedule BLK_DEV_IDE_SATA for removal
- Re: [RFC: 2.6 patch] schedule BLK_DEV_IDE_SATA for removal
- how to handle pata_via when controller not in fully-pci-native mode (two irqs?)
- Re: [PATCH] libata: Add pata_dma option so users can disable pata_dma as they can with old-ide
- Re: SATA update in 2.4, ICH8
- Error in syslog on 2.6.20
- Re: [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
- Re: [PATCH] libata: Add pata_dma option so users can disable pata_dma as they can with old-ide
- From: Bartlomiej Zolnierkiewicz
- Re: [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
- From: Kristen Carlson Accardi
- Re: [PATCH] libata: Add pata_dma option so users can disable pata_dma as they can with old-ide
- Re: [RFT] hpt366: reset DMA state machine on timeouts
- Re: [RFT] hpt366: reset DMA state machine on timeouts
- Re: [RFT] hpt366: reset DMA state machine on timeouts
- Re: [RFT] hpt366: reset DMA state machine on timeouts
- Re: [PATCH] libata: Add pata_dma option so users can disable pata_dma as they can with old-ide
- Re: [BUG] ide dma_timer_expiry, then hard lockup
- Re: [RFT] hpt366: reset DMA state machine on timeouts
- Re: [RFT] hpt366: reset DMA state machine on timeouts
- Re: [PATCH] libata: Add pata_dma option so users can disable pata_dma as they can with old-ide
- Re: SATA: Is "DPO and FUA" ever supported?
- Re: SATA: Is "DPO and FUA" ever supported?
- Re: [PATCH] ide: Stop mapping ROMs
- [PATCH] libata: Add pata_dma option so users can disable pata_dma as they can with old-ide
- Re: libata and legacy ide pcmcia failure
- [PATCH] ide: Stop mapping ROMs
- [PATCH] ide: Fix a theoretical Ooops case
- Re: libata and legacy ide pcmcia failure
- Re: [RFC: 2.6 patch] schedule BLK_DEV_IDE_SATA for removal
- Re: [RFC: 2.6 patch] schedule BLK_DEV_IDE_SATA for removal
- Re: SATA update in 2.4, ICH8
- Re: SATA update in 2.4, ICH8
- Re: [RFC: 2.6 patch] schedule BLK_DEV_IDE_SATA for removal
- Re: [RFC: 2.6 patch] schedule BLK_DEV_IDE_SATA for removal
- [RFC: 2.6 patch] schedule BLK_DEV_IDE_SATA for removal
- Re: [BUG] ide dma_timer_expiry, then hard lockup
- Re: [BUG] ide dma_timer_expiry, then hard lockup
- Re: [BUG] ide dma_timer_expiry, then hard lockup
- Re: [PATCH 1/5] ide: add short cables support
- From: Bartlomiej Zolnierkiewicz
- Re: [RFT] hpt366: reset DMA state machine on timeouts
- Re: SATA update in 2.4, ICH8
- Re: ide/dma not working from 2.6.19 to 2.6.21
- Re: [PATCH 19/19] ide: use PIO/MMIO operations directly where possible
- From: Bartlomiej Zolnierkiewicz
- Re: [BUG] ide dma_timer_expiry, then hard lockup
- [RFT] hpt366: reset DMA state machine on timeouts
- Re: [PATCH 19/19] ide: use PIO/MMIO operations directly where possible
- Re: [2/2] 2.6.22-rc5: known regressions v2
- Re: ide/dma not working from 2.6.19 to 2.6.21
- Re: ide/dma not working from 2.6.19 to 2.6.21
- RE: CF flash IDE failure to attach with 2.6.20+
- Re: 126X DVD drive? (odd ide-cd output)
- Re: CF flash IDE failure to attach with 2.6.20+
- SATA: Is "DPO and FUA" ever supported?
- Re: [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
- Re: 126X DVD drive? (odd ide-cd output)
- ide/dma not working from 2.6.19 to 2.6.21
- SATA update in 2.4, ICH8
- RE: CF flash IDE failure to attach with 2.6.20+
- Re: Hard lockup with ata_piix 2.6.21.1: strange traceback, too
- Re: Possible BUG in Linux's Promise TX4 drivers
- Re: CF flash IDE failure to attach with 2.6.20+
- Possible BUG in Linux's Promise TX4 drivers
- 126X DVD drive? (odd ide-cd output)
- RE: CF flash IDE failure to attach with 2.6.20+
- [git patches] libata fixes
- Re: [PATCH 2.6.22-rc5] ahci: fix PORTS_IMPL override
- Re: [PATCH] libata: more NONCQ devices
- Re: [PATCH] pata_it821x: (partially) fix DMA in RAID mode
- [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
- From: Kristen Carlson Accardi
- Re: [patch 2b/3] Expose Power Management Policy option to users
- From: Kristen Carlson Accardi
- Hard lockup with ata_piix 2.6.21.1: strange traceback, too
- Re: [BUG] ide dma_timer_expiry, then hard lockup
- Re: [BUG] ide dma_timer_expiry, then hard lockup
- Re: [PROBLEM]: hdparm strange behaviour for 2.6.21 and later
- Random freezes with libata + ICH7 PATA
- Re: sata_promise error handling
- SiI 3124 bus reset issues
- Re: [BUG] ide dma_timer_expiry, then hard lockup
- [PATCH 2.6.22-rc5 2/2] sata_promise: SATA hotplug support
- [PATCH 2.6.22-rc5 1/2] sata_promise: cleanups
- Re: [BUG] ide dma_timer_expiry, then hard lockup
- From: Bartlomiej Zolnierkiewicz
- Re: Pioneer DVR-111 problems with DMA
- sata_promise error handling
- Re: [BUG] ide dma_timer_expiry, then hard lockup
- Re: [BUG] ide dma_timer_expiry, then hard lockup
- Re: [BUG] ide dma_timer_expiry, then hard lockup
- Re: [BUG] ide dma_timer_expiry, then hard lockup
- Re: [BUG] ide dma_timer_expiry, then hard lockup
- Re: [BUG] ide dma_timer_expiry, then hard lockup
- Re: [BUG] ide dma_timer_expiry, then hard lockup
- bug in libata [was Re: [BUG] ide dma_timer_expiry, then hard lockup
- Re: [BUG] ide dma_timer_expiry, then hard lockup
- Re: [BUG] ide dma_timer_expiry, then hard lockup
- Re: [BUG] ide dma_timer_expiry, then hard lockup
- Re: [BUG] ide dma_timer_expiry, then hard lockup
- ata1: soft resetting port
- Re: Pioneer DVR-111 problems with DMA
- Re: VIA VT6420: SATA disconnects
- [PATCH 2.6.22-rc5] ahci: fix PORTS_IMPL override
- Pioneer DVR-111 problems with DMA
- Re: [PATCH] Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work
- 2.6.22-rc4 BUG, old IDE driver
- Re: CF flash IDE failure to attach with 2.6.20+
- sata_sil24 not configuring drive right?
- RE: CF flash IDE failure to attach with 2.6.20+
- RE: CF flash IDE failure to attach with 2.6.20+
- Re: [BUG] ide dma_timer_expiry, then hard lockup
- Re: [BUG] ide dma_timer_expiry, then hard lockup
- Re: [BUG] ide dma_timer_expiry, then hard lockup
- Re: libata: ATA_PIIX missing ICH8M PCIIDs.
- Re: libata: ATA_PIIX missing ICH8M PCIIDs.
- Re: [BUG] ide dma_timer_expiry, then hard lockup
- Re: libata: ATA_PIIX missing ICH8M PCIIDs.
- Re: libata: ATA_PIIX missing ICH8M PCIIDs.
- Re: [PROBLEM]: hdparm strange behaviour for 2.6.21 and later
- Re: libata: ATA_PIIX missing ICH8M PCIIDs.
- Re: libata: ATA_PIIX missing ICH8M PCIIDs.
- RE: libata: ATA_PIIX missing ICH8M PCIIDs.
- Re: libata interface fatal error
- Re: libata: ATA_PIIX missing ICH8M PCIIDs.
- RE: [BUG] ide dma_timer_expiry, then hard lockup
- RE: [PATCH] Add new ICH9M pci id (8086:2850) to ata_piix id list
- RE: libata: ATA_PIIX missing ICH8M PCIIDs.
- RE: libata: ATA_PIIX missing ICH8M PCIIDs.
- [BUG] ide dma_timer_expiry, then hard lockup
- Re: libata interface fatal error
- Re: libata: ATA_PIIX missing ICH8M PCIIDs.
- Re: libata: ATA_PIIX missing ICH8M PCIIDs.
- libata: ATA_PIIX missing ICH8M PCIIDs.
- Re: CF flash IDE failure to attach with 2.6.20+
- Re: Machine hanging on synchronize cache on shutdown 2.6.22-rc4-git[45678]
- Re: Machine hanging on synchronize cache on shutdown 2.6.22-rc4-git[45678]
- Re: libata interface fatal error
- From: Florian Effenberger
- Re: libata interface fatal error
- Re: Machine hanging on synchronize cache on shutdown 2.6.22-rc4-git[45678]
- Re: libata interface fatal error
- From: Florian Effenberger
- Re: CF flash IDE failure to attach with 2.6.20+
- Re: libata interface fatal error
- Re: libata interface fatal error
- From: Florian Effenberger
- Re: libata interface fatal error
- From: Florian Effenberger
- Re: libata interface fatal error
- Re: libata interface fatal error
- From: Florian Effenberger
- CF flash IDE failure to attach with 2.6.20+
- Re: SATA problems
- Re: libata interface fatal error
- Re: Machine hanging on synchronize cache on shutdown 2.6.22-rc4-git[45678]
- Re: libata interface fatal error
- Re: libata interface fatal error
- Re: libata interface fatal error
- [PATCH] libata: more NONCQ devices
- Re: [PATCH/RFC 7/9] libata: pdc_freeze() semantic change
- Re: [PATCH/RFC 5/9] libata: use freeze()/thaw() for polling
- pata_via.c 80w cable detection problem
- Re: [PATCH] Add new ICH9M pci id (8086:2850) to ata_piix id list
- Re: libata interface fatal error
- Re: libata interface fatal error
- Fwd: [PATCH] [libata] Add irq_flags to struct pata_platform_info
- sata_promise: preliminary hotplug support
- Re: [PATCH] Add new ICH9M pci id (8086:2850) to ata_piix id list
- Re: [PATCH 1/5] ide: add short cables support
- Re: [2/2] 2.6.22-rc5: known regressions
- Disk errors reported on boot - kernel 2.6.18
- Re: Machine hanging on synchronize cache on shutdown 2.6.22-rc4-git[45678]
- Re: Disk errors reported on boot - kernel 2.6.18
- [PROBLEM]: hdparm strange behaviour for 2.6.21 and later
- Re: Combined mode quirk removal kills performance
- Re: Disk errors reported on boot - kernel 2.6.18
- Machine hanging on synchronize cache on shutdown 2.6.22-rc4-git[45678]
- Re: libata interface fatal error
- From: Florian Effenberger
- [git patches] IDE fixes
- From: Bartlomiej Zolnierkiewicz
- Re: [-mm patch] drivers/ide/ide-dma.c: unexport ide_set_dma
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/5] ide: add short cables support
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/3] Make the IDE DMA timeout modifiable
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] ide: convert ide_find_best_mode() users to use ide_max_dma_mode()
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] HPA Detect From Resume
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/5] ide: add short cables support
- Re: [PATCH 1/6] libata: update protocol numbers
- [PATCH] [libata] Add irq_flags to struct pata_platform_info
- [PATCH/RFC 9/9] libata: remove irq_on/off and rename freeze()/thaw() to irq_on/off
- [PATCH/RFC 8/9] libata: remove writing of tf->ctl from ata_tf_load()
- [PATCH/RFC 7/9] libata: pdc_freeze() semantic change
- [PATCH/RFC 6/9] libata: add freeze()/thaw() to old EH LLDDs
- [PATCH/RFC 5/9] libata: use freeze()/thaw() for polling
- [PATCH/RFC 4/9] libata: call irq_off from bmdma_freeze()
- [PATCH/RFC 3/9] libata: add ->irq_off() to LLDDs
- [PATCH/RFC 2/9] libata: add irq_off() for symmetry
- [PATCH/RFC 1/9] libata: remove irq_on from ata_bus_reset() and ata_std_postreset()
- [PATCH/RFC 0/9] libata: irq_on/off restructuring
- [-mm patch] drivers/ide/ide-dma.c: unexport ide_set_dma
- [PATCH 2.6.22-rc4]: libata: PATA-mode fixes for sis_sata
- Re: [patch 2a/3] Expose Power Management Policy option to users
- Re: SATA problems
- Re: [patch 2a/3] Expose Power Management Policy option to users
- From: Kristen Carlson Accardi
- Re: libata interface fatal error
- From: Florian Effenberger
- Re: libata interface fatal error
- Re: [patch 0/3] AHCI Link Power Management
- Re: [patch 0/3] AHCI Link Power Management
- Re: libata interface fatal error
- From: Florian Effenberger
- Re: libata interface fatal error
- Re: libata and legacy ide pcmcia failure
- Re: [PROBLEM + PATCH] Sata port disabled by BIOS gets initialized
- Re: [patch 0/3] AHCI Link Power Management
- Disk errors reported on boot - kernel 2.6.18
- Re: [patch 2a/3] Expose Power Management Policy option to users
- libata seems doesn't work on SATA, F7
- Re: [patch 0/3] AHCI Link Power Management
- Re: [patch 0/3] AHCI Link Power Management
- Re: libata passthru: support PIO multi commands
- Re: libata passthru: support PIO multi commands
- Re: libata passthru: support PIO multi commands
- Re: [patch 0/3] AHCI Link Power Management
- From: Kristen Carlson Accardi
- Re: [patch 2a/3] Expose Power Management Policy option to users
- SATA_sil24 for 2.4
- Re: libata interface fatal error
- From: Florian Effenberger
- Re: [patch 0/3] AHCI Link Power Management
- Re: libata passthru: support PIO multi commands
- Re: libata and legacy ide pcmcia failure
- [-mm patch] drivers/ata/sata_nv.c: make 3 functions static
- Re: [PATCH 1/3] Make the IDE DMA timeout modifiable
- Re: [PROBLEM + PATCH] Sata port disabled by BIOS gets initialized
- Re: [patch 2b/3] Expose Power Management Policy option to users
- From: Kristen Carlson Accardi
- Re: [patch 2a/3] Expose Power Management Policy option to users
- From: Kristen Carlson Accardi
- Re: [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
- From: Kristen Carlson Accardi
- Re: [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
- Re: libata passthru: support PIO multi commands
- Re: [patch 0/3] AHCI Link Power Management
- From: Kristen Carlson Accardi
- Re: [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
- Re: [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
- Re: [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
- Re: [patch 0/3] AHCI Link Power Management
- From: Kristen Carlson Accardi
- Re: [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
- Re: [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
- Re: libata passthru: support PIO multi commands
- Re: [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
- From: Henrique de Moraes Holschuh
- Re: [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
- Re: [PATCH] ide: convert ide_find_best_mode() users to use ide_max_dma_mode()
- Re: [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
- From: Henrique de Moraes Holschuh
- Re: [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
- Re: [patch 0/3] AHCI Link Power Management
- Re: [patch 0/3] AHCI Link Power Management
- Re: [patch 0/3] AHCI Link Power Management
- Re: [patch 0/3] AHCI Link Power Management
- Re: [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
- Re: [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
- From: Henrique de Moraes Holschuh
- Re: libata and legacy ide pcmcia failure
- Re: [patch 0/3] AHCI Link Power Management
- Re: [patch 0/3] AHCI Link Power Management
- Re: [patch 0/3] AHCI Link Power Management
- Re: [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
- From: Dagfinn Ilmari Mannsåker
- Re: [patch 0/3] AHCI Link Power Management
- Re: [patch 0/3] AHCI Link Power Management
- Re: [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
- Re: [patch 0/3] AHCI Link Power Management
- Re: [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
- Re: [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
- From: Henrique de Moraes Holschuh
- AHCI aggressive powersaving
- Re: [PATCH] AHCI powersaving and port-stopping (2.6.22-rc4)
- Re: libata and legacy ide pcmcia failure
- Re: [PATCH] AHCI powersaving and port-stopping (2.6.22-rc4)
- Re: libata and legacy ide pcmcia failure
- Re: [patch 1/7] libata: check for AN support
- From: Kristen Carlson Accardi
- Re: [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
- Re: [patch 2/3] Expose Power Management Policy option to users
- Re: [patch 1/3] Store interrupt value
- Re: [PATCH] AHCI powersaving and port-stopping (2.6.22-rc4)
- From: Kristen Carlson Accardi
- [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
- From: Kristen Carlson Accardi
- [patch 2/3] Expose Power Management Policy option to users
- From: Kristen Carlson Accardi
- [patch 1/3] Store interrupt value
- From: Kristen Carlson Accardi
- [patch 0/3] AHCI Link Power Management
- From: Kristen Carlson Accardi
- Re: [PROBLEM + PATCH] Sata port disabled by BIOS gets initialized
- Re: [PATCH] AHCI powersaving and port-stopping (2.6.22-rc4)
- Re: [PATCH] AHCI powersaving and port-stopping (2.6.22-rc4)
- Re: Re: [PROBLEM + PATCH] Sata port disabled by BIOS gets initialized
- Re: [PATCH] AHCI powersaving and port-stopping (2.6.22-rc4)
- Re: [PATCH] AHCI powersaving and port-stopping (2.6.22-rc4)
- [PATCH] AHCI powersaving and port-stopping (2.6.22-rc4)
- [PATCH] pata_it821x: (partially) fix DMA in RAID mode
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] pata_it821x: (partially) fix DMA in RAID mode
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH libata-dev#upstream-fixes] libata: force PIO on IOMEGA ZIP 250 ATAPI
- Re: [PATCH libata-dev#upstream-fixes] libata: force PIO on IOMEGA ZIP 250 ATAPI
- Re: [PATCH] libata: limit post SRST nsect/lbal wait to ~100ms
- [git patches] more libata fixes
- Re: [PATCH] pata_it821x: (partially) fix DMA in RAID mode
- Re: 2.6.22-rc regression: smartctl does not work with SATA disk
- Re: 2.6.22-rc regression: smartctl does not work with SATA disk
- Re: [PATCH 1/6] libata: update protocol numbers
- Re: libata and legacy ide pcmcia failure
- Re: [PATCH] pata_it821x: sync with IDE it821x driver
- Re: [PATCH] pata_it821x: (partially) fix DMA in RAID mode
- Re: [PATCH libata-dev#upstream-fixes] libata: force PIO on IOMEGA ZIP 250 ATAPI
- From: Bartlomiej Zolnierkiewicz
- [PATCH] pata_it821x: (partially) fix DMA in RAID mode
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] pata_it821x: sync with IDE it821x driver
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] libata: limit post SRST nsect/lbal wait to ~100ms
- Re: [PATCH] pata_it821x: sync with IDE it821x driver
- Re: [PATCH] pata_it821x: sync with IDE it821x driver
- Re: [PATCH libata-dev#upstream-fixes] libata: force PIO on IOMEGA ZIP 250 ATAPI
- [PATCH 2/5] piix: backport short cables support from ata_piix.c
- From: Bartlomiej Zolnierkiewicz
- [PATCH 5/5] via82cxxx: backport short cables support from pata_via.c
- From: Bartlomiej Zolnierkiewicz
- [PATCH 4/5] sis5513: backport short cables support from pata_sis.c
- From: Bartlomiej Zolnierkiewicz
- [PATCH 3/5] alim15x3: backport short cables support from pata_ali.c
- From: Bartlomiej Zolnierkiewicz
- [PATCH 1/5] ide: add short cables support
- From: Bartlomiej Zolnierkiewicz
- 2.6.22-rc regression: smartctl does not work with SATA disk
- [PATCH libata-dev#upstream-fixes] libata: force PIO on IOMEGA ZIP 250 ATAPI
- [PATCH] libata: limit post SRST nsect/lbal wait to ~100ms
- Re: [PATCH] pata_it821x: sync with IDE it821x driver
- [git patches] libata fixes
- Re: [PATCH 1/6] libata: update protocol numbers
- Re: [PATCH 1/6] libata: update protocol numbers
- Re: [PATCH] libata: Correct abuse of language
- Re: [PATCH] libata-core/sff: Fix multiple assumptions about DMA
- Re: [PATCH] libata: fix hw_sata_spd_limit initialization
- Re: [PATCH 1/1] libata: print device model and firmware revision for ATAPI devices
- Re: [PATCH] [2.6.22] libata: fix probe time irq printouts
- Re: [PATCH] remove unused variable in pata_isapnp
- Re: libata and legacy ide pcmcia failure
- Re: [2/2] 2.6.22-rc4: known regressions with patches v2
- [PATCH] ide: convert ide_find_best_mode() users to use ide_max_dma_mode()
- From: Bartlomiej Zolnierkiewicz
- [PATCH] ide: fix pre-EIDE SWDMA support
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] pata_it821x: sync with IDE it821x driver
- From: Bartlomiej Zolnierkiewicz
- Re: [2/3] 2.6.22-rc4: known regressions v2
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] Re: Linux v2.6.22-rc3
- Re: [PATCH] Re: Linux v2.6.22-rc3
- Re: [2/2] 2.6.22-rc4: known regressions with patches v2
- Re: [2/3] 2.6.22-rc4: known regressions v2
- Re: sata_promise: still getting errors with 2.6.22-rc4
- Re: sata_promise: which version/patch to test?
- Re: HPT374 IDE problem with 2.6.21.* kernels
- Re: [PATCH pata-2.6] aec62xx: kill speedproc() method wrapper (take 2)
- Re: [PATCH 1/1] ide: ide-generic, add another device exception
- Re: [PATCH] pata_it821x: sync with IDE it821x driver
- Re: [PROBLEM + PATCH] Sata port disabled by BIOS gets initialized by ata_piix drive
- [PATCH] pata_it821x: sync with IDE it821x driver
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/1] ide: ide-generic, add another device exception
- Re: [PATCH 1/1] ide: ide-generic, add another device exception
- From: Bartlomiej Zolnierkiewicz
- Re: libata and legacy ide pcmcia failure
- Re: libata and legacy ide pcmcia failure
- Re: [PATCH 1/1] ide: ide-generic, add another device exception
- Re: [PATCH 1/1] ide: ide-generic, add another device exception
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] Re: Linux v2.6.22-rc3
- Re: [PATCH] Re: Linux v2.6.22-rc3
- Re: [PATCH] Re: Linux v2.6.22-rc3
- Re: [PATCH] Re: Linux v2.6.22-rc3
- Re: [PATCH] Re: Linux v2.6.22-rc3
- Re: [PATCH] libata: claim ctl port for legacy SFF ports
- Re: [PATCH] Re: Linux v2.6.22-rc3
- Re: [PATCH] Re: Linux v2.6.22-rc3
- Re: [PATCH] Re: Linux v2.6.22-rc3
- Re: [PATCH] Re: Linux v2.6.22-rc3
- Re: [PATCH] libata: claim ctl port for legacy SFF ports
- Re: [PATCH] Re: Linux v2.6.22-rc3
- Re: [PATCH] Re: Linux v2.6.22-rc3
- Re: [PATCH] libata: claim ctl port for legacy SFF ports
- [PROBLEM + PATCH] Sata port disabled by BIOS gets initialized by ata_piix drive
- Re: [PATCH] libata: claim ctl port for legacy SFF ports
- Re: [PATCH 1/1] ide: ide-generic, add another device exception
- Re: [PATCH] libata: claim ctl port for legacy SFF ports
- [git patches] IDE fixes
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH pata-2.6 fix] hpt366: disallow Ultra133 for HPT374
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH pata-2.6] hpt366: simplify UltraDMA filtering (take 3)
- From: Bartlomiej Zolnierkiewicz
- Re: HPT374 IDE problem with 2.6.21.* kernels
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH pata-2.6] aec62xx: kill speedproc() method wrapper (take 2)
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 3/2] serverworks: always tune CSB6
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/1] ide: ide-generic, add another device exception
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] Replace C code with call to ARRAY_SIZE() macro.
- From: Bartlomiej Zolnierkiewicz
- Re: SATA hotswap and write caches
- Re: libata and legacy ide pcmcia failure
- Re: [PATCH] libata: claim ctl port for legacy SFF ports
- [PATCH] libata: claim legacy SFF ctl ioport in legacy_dr
- Re: [PATCH] libata: claim ctl port for legacy SFF ports
- Re: [PATCH] libata: claim ctl port for legacy SFF ports
- [PATCH] libata: claim ctl port for legacy SFF ports
- Re: [PATCH] Re: Linux v2.6.22-rc3
- Re: [PATCH] Re: Linux v2.6.22-rc3
- Re: [PATCH] Re: Linux v2.6.22-rc3
- Re: [PATCH] Re: Linux v2.6.22-rc3
- [patch 07/32] sata_via: add missing PM hooks
- Re: libata and legacy ide pcmcia failure
- Re: [PATCH] Re: Linux v2.6.22-rc3
- Re: [PATCH] Re: Linux v2.6.22-rc3
- Re: [PATCH] Re: Linux v2.6.22-rc3
- Re: [PATCH] Re: Linux v2.6.22-rc3
- [PATCH] libata-core/sff: Fix multiple assumptions about DMA
- [PATCH] libata: Correct abuse of language
- Re: libata interface fatal error
- From: Florian Effenberger
- Re: [PATCH pata-2.6 fix] hpt366: disallow Ultra133 for HPT374
- [PROBLEM] CDROM not ready. Make sure there is a disc in the drive.
- From: Srihari Vijayaraghavan
- Re: libata interface fatal error
- shutdown.html update
- [PATCH 6/6] libata: update cached device paramters
- [PATCH 5/6] libata: support ATAPI devices
- [PATCH 4/6] libata: always enforce correct DEV bit
- [PATCH 3/6] libata: map UDMA protocols
- [PATCH 2/6] libata: support PIO multi commands
- [PATCH 1/6] libata: update protocol numbers
- [PATCH 0/6] libata: ATA passthru fixes
- Re: [PATCH] Re: Linux v2.6.22-rc3
- Re: [PATCH] Re: Linux v2.6.22-rc3
- Rescue question
- Re: [PATCH pata-2.6 fix] hpt366: disallow Ultra133 for HPT374
- Re: libata interface fatal error
- From: Florian Effenberger
- [PATCH pata-2.6] hpt366: simplify UltraDMA filtering (take 3)
- [PATCH pata-2.6 fix] hpt366: disallow Ultra133 for HPT374
- Re: Promise TX4 (PDC40718) hotplug support
- Re: Promise TX4 (PDC40718) hotplug support
- Promise TX4 (PDC40718) hotplug support
- Re: [PATCH] Re: Linux v2.6.22-rc3
- [PATCH] libata: fix hw_sata_spd_limit initialization
- Re: [PATCH] Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work
- Re: YuLin: Where can I get the newest source of sata_sis?
- Re: [2/2] 2.6.22-rc4: known regressions with patches
- Re: [PATCH 2.6.22-rc4] libata: SiS180 pata support
- Re: [PATCH 2.6.22-rc4] libata: SiS180 pata support
- Re: [PATCH 2.6.22-rc4] libata: SiS180 pata support
- [PATCH 2.6.22-rc4] libata: SiS180 pata support
- Re: [Bugme-new] [Bug 8587] New: disk on promise pdc20378 disabled at boot
- Re: HPT374 IDE problem with 2.6.21.* kernels
- Re: [2/2] 2.6.22-rc4: known regressions with patches
[Index of Archives]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]