Mikael Pettersson wrote:
>
>
> 2.6.22 + this prints the following on my G3:
>
> pata_pdc2027x 0000:00:0e.0: version 0.9
> usec_elapsed for mdelay(37) [35431]
> start time: [1184112028]s [775333]us
> end time: [1184112028]s [810764]us
> pata_pdc2027x 0000:00:0e.0: PLL input clock 1691741 kHz
> pata_pdc2027x: Invalid PLL input clock 1691741kHz, give up!
>
My x86 box got this:
Jul 11 10:02:17 p4ht-s kernel: [ 260.746980] ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNK1] -> GSI 10 (level, low) -> IRQ 10
Jul 11 10:02:17 p4ht-s kernel: [ 260.882905] usec_elapsed for mdelay(37) [36734]
Jul 11 10:02:17 p4ht-s kernel: [ 260.882911] start time: [1184119336]s [999802]us
Jul 11 10:02:17 p4ht-s kernel: [ 260.882914] end time: [1184119337]s [36536]us
Jul 11 10:02:17 p4ht-s kernel: [ 260.882917] pata_pdc2027x 0000:02:05.0: PLL input clock 16829 kHz
So, it seems both mdelay(37) and do_gettimeofday() are working properly on PowerMac G3.
Maybe the calculated wrong PLL input is due to wrong reading of the counter register?
Could you please try the attached debug patch for more clue, thanks.
--
albert
diff -Nrup 00_libata-dev/drivers/ata/pata_pdc2027x.c 01_debug/drivers/ata/pata_pdc2027x.c
--- 00_libata-dev/drivers/ata/pata_pdc2027x.c 2007-07-07 09:58:55.000000000 +0800
+++ 01_debug/drivers/ata/pata_pdc2027x.c 2007-07-11 10:41:41.000000000 +0800
@@ -574,8 +574,8 @@ retry:
counter = (bccrh << 15) | bccrl;
- PDPRINTK("bccrh [%X] bccrl [%X]\n", bccrh, bccrl);
- PDPRINTK("bccrhv[%X] bccrlv[%X]\n", bccrhv, bccrlv);
+ printk(KERN_ERR "bccrh [%X] bccrl [%X]\n", bccrh, bccrl);
+ printk(KERN_ERR "bccrhv[%X] bccrlv[%X]\n", bccrhv, bccrlv);
/*
* The 30-bit decreasing counter are read by 2 pieces.
@@ -584,7 +584,7 @@ retry:
*/
if (retry && !(bccrh == bccrhv && bccrl >= bccrlv)) {
retry--;
- PDPRINTK("rereading counter\n");
+ printk(KERN_ERR "rereading counter\n");
goto retry;
}
@@ -722,8 +722,21 @@ static long pdc_detect_pll_input_clock(s
pll_clock = (start_count - end_count) / 100 *
(100000000 / usec_elapsed);
- PDPRINTK("start[%ld] end[%ld] \n", start_count, end_count);
- PDPRINTK("PLL input clock[%ld]Hz\n", pll_clock);
+ printk(KERN_ERR "start[%ld] end[%ld] \n", start_count, end_count);
+ printk(KERN_ERR "usec_elapsed for mdelay(100) [%ld]\n", usec_elapsed);
+ printk(KERN_ERR "start time: [%ld]s [%ld]us \n", start_time.tv_sec, start_time.tv_usec);
+ printk(KERN_ERR "end time: [%ld]s [%ld]us \n", end_time.tv_sec, end_time.tv_usec);
+ printk(KERN_ERR "PLL input clock[%ld]Hz\n", pll_clock);
+
+ /* mdelay(37) for comparison */
+ do_gettimeofday(&start_time);
+ mdelay(37);
+ do_gettimeofday(&end_time);
+ usec_elapsed = (end_time.tv_sec - start_time.tv_sec) * 1000000 +
+ (end_time.tv_usec - start_time.tv_usec);
+ printk(KERN_ERR "usec_elapsed for mdelay(37) [%ld]\n", usec_elapsed);
+ printk(KERN_ERR "start time: [%ld]s [%ld]us \n", start_time.tv_sec, start_time.tv_usec);
+ printk(KERN_ERR "end time: [%ld]s [%ld]us \n", end_time.tv_sec, end_time.tv_usec);
return pll_clock;
}
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
