On Thu, 5 Jul 2007 13:39:49 +0900 Tejun Heo <htejun@xxxxxxxxx> wrote: > For some reason, via decided that combined SATA/PATA setup in sata_via > isn't good enough and added a SATA port without SCR access to CX700. (It seems to be an integrated PATA/SATA bridge of some sort) > For yet another unknown reason, slave slot of the SATA port dislikes > SETXFER. > > This patch implements two quirks for CX700 - VIA_SATA_PATA and > VIA_BAD_SLAVE_SETXFER. SATA_PATA indicates that the first port is > SATA and BAD_SLAVE_SETXFER indicates slave port may fail SETXFER. This makes no sense. If the SETXFER failed how did the device get into the mode it is in ? How will change down work ? Why does the old IDE driver work ? I think this needs a lot more explanation NAK - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
