Re: Some NCQ numbers...

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dan Aloni wrote:
> On Thu, Jun 28, 2007 at 02:51:58PM +0400, Michael Tokarev wrote:
>> [..]
>> Test machine was using MPTSAS driver for the following card:
>>   SCSI storage controller: LSI Logic / Symbios Logic SAS1064E PCI-Express Fusion-MPT SAS (rev 02)
>>
>> Pretty similar results were obtained on an AHCI controller:
>>   SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) Serial ATA Storage Controller AHCI (rev 01)
>> on another machines.
> 
> Are you sure that NCQ was enabled between the controller and drive? 
> Did you verify this? I know about some versions that disable NCQ 
> support internally in their firmware (something to do with bugs in
> error handling).

The next obvious question is: how to check/verify this?

/mjt
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux