Hello.
Alan Cox wrote:
Debugging a report of a problem with an ancient solid state disk showed
up some problems in the IORDY handling
1. We check the wrong bit to see if the device has IORDY
2. Even then some ancient creaking piles of crap don't support
SETXFER at all.
I think this should go via -mm for a bit. The cases it fixes are obscure
and the risk of side effects is slight but possible. This also moves us
slightly closer to supporting original MFM/RLL disks with libata but
before Jeff panics I have no plans to do that....
Signed-off-by: Alan Cox <alan@xxxxxxxxxx>
Acked-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.23rc1-mm1/drivers/ata/libata-core.c linux-2.6.23rc1-mm1/drivers/ata/libata-core.c
--- linux.vanilla-2.6.23rc1-mm1/drivers/ata/libata-core.c 2007-07-26 15:02:57.000000000 +0100
+++ linux-2.6.23rc1-mm1/drivers/ata/libata-core.c 2007-07-31 10:47:21.152431008 +0100
@@ -2787,7 +2803,11 @@
/* Old CFA may refuse this command, which is just fine */
if (dev->xfer_shift == ATA_SHIFT_PIO && ata_id_is_cfa(dev->id))
err_mask &= ~AC_ERR_DEV;
-
+ /* Some very old devices and some bad newer ones fail any kind of
+ SET_XFERMODE request but support PIO0-2 timings and no IORDY */
+ if (dev->xfer_shift == ATA_SHIFT_PIO && !ata_id_has_iordy(dev->id) &&
I'd have joined this to the previous if...
+ dev->pio_mode <= XFER_PIO_2)
Overindented line (to my taste :-). And do we really need to check this?
+ err_mask &= ~AC_ERR_DEV;
if (err_mask) {
ata_dev_printk(dev, KERN_ERR, "failed to set xfermode "
"(err_mask=0x%x)\n", err_mask);
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.23rc1-mm1/include/linux/ata.h linux-2.6.23rc1-mm1/include/linux/ata.h
--- linux.vanilla-2.6.23rc1-mm1/include/linux/ata.h 2007-07-26 15:02:58.000000000 +0100
+++ linux-2.6.23rc1-mm1/include/linux/ata.h 2007-07-27 19:03:40.000000000 +0100
@@ -354,7 +355,7 @@
( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \
((id)[78] & (1 << 5)) )
#define ata_id_iordy_disable(id) ((id)[49] & (1 << 10))
-#define ata_id_has_iordy(id) ((id)[49] & (1 << 9))
+#define ata_id_has_iordy(id) ((id)[49] & (1 << 11))
Ha, it was cheking for LBA support instead... :-)
MBR, Sergei
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
