Linux IDE Archive

• Thread Index

• Re: PROBLEM: kernel 2.6.22.6 pata_pdc202xx_old.c limiting to UDMA/33 instead of UDMA/100 (UPDATED 2.6.22.6)
  • From: Sergei Shtylyov
• Re: [PATCH] sata_mv: Test patch for Hightpoint RocketRaid 1740/1742
  • From: Alan Cox
• Re: [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
  • From: Sergei Shtylyov
• [PATCH] drivers/firmware: const-ify DMI API and internals
  • From: Jeff Garzik
• Re: [PATCH] sata_mv: Test patch for Hightpoint RocketRaid 1740/1742
  • From: Krzysztof Oledzki
• Re: [PATCH] sata_mv: Test patch for Hightpoint RocketRaid 1740/1742
  • From: Jeff Garzik
• Re: Should sata_mv work with Highpoint RocketRAID 2300?
  • From: Krzysztof Oledzki
• Re: ATA_PIIX - soft resetting port, port is slow to respond, machine "freezes" for a few seconds
  • From: Tomasz Chmielewski
• Re: ATA_PIIX - soft resetting port, port is slow to respond, machine "freezes" for a few seconds
  • From: Joris
• ATA_PIIX - soft resetting port, port is slow to respond, machine "freezes" for a few seconds
  • From: Tomasz Chmielewski
• [PATCH] ata_piix: use more-robust form of array init
  • From: Jeff Garzik
• Re: sata_via: write errors on PATA drive connected to VT6421
  • From: Jeff Garzik
• Re: [1/2] 2.6.23-rc3: known regressions with patches
  • From: Linus Torvalds
• Re: Port Multiplier Patch 2.6.22.1 on Alpha
  • From: Tom Evans
• Re: sata_via: write errors on PATA drive connected to VT6421
  • From: Alan Cox
• Re: sata_via: write errors on PATA drive connected to VT6421
  • From: Ondrej Zary
• [APPENDIX PATCH 5/5] blk_end_request: userspace multipath-tools for request-based dm
  • From: Kiyoshi Ueda
• [PATCH 1/7] blk_end_request: add new request completion interface
  • From: Kiyoshi Ueda
• [APPENDIX PATCH 4/5] blk_end_request: userspace device-mapper for request-based dm
  • From: Kiyoshi Ueda
• [APPENDIX PATCH 3/5] blk_end_request: dynamic load balancing for request-based dm-multipath
  • From: Kiyoshi Ueda
• [APPENDIX PATCH 2/5] blk_end_request: request-based dm-multipath
  • From: Kiyoshi Ueda
• [APPENDIX PATCH 1/5] blk_end_request: request-based dm core
  • From: Kiyoshi Ueda
• [PATCH 7/7] blk_end_request: change rq->end_io to cover request completion as a whole
  • From: Kiyoshi Ueda
• [PATCH 6/7] blk_end_request: remove/unexport end_that_request_*
  • From: Kiyoshi Ueda
• [PATCH 5/7] blk_end_request: change ide-cd (cdrom_newpc_intr)
  • From: Kiyoshi Ueda
• [PATCH 4/7] blk_end_request: cciss/cpqarray/xsysace change
  • From: Kiyoshi Ueda
• [PATCH 3/7] blk_end_request: changing "normal" drivers
  • From: Kiyoshi Ueda
• [PATCH 2/7] blk_end_request: add blk_rq_size() macros
  • From: Kiyoshi Ueda
• [PATCH 0/7] blk_end_request: full I/O completion handler
  • From: Kiyoshi Ueda
• Re: libata not working for sis5533
  • From: Patrizio Bassi
• Re: [1/2] 2.6.23-rc3: known regressions with patches
  • From: Len Brown
• Re: hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
  • From: Sergei Shtylyov
• Re: [PATCH 2/4] hpt366: UltraDMA filter for SATA cards (take 3)
  • From: Sergei Shtylyov
• Re: [PATCH] sata_sil and PMP...
  • From: Jeff Garzik
• RE: [PATCH 2.6.23-rc4][reRESEND] ahci: RAID mode SATA patch for Intel Tolapai
  • From: Gaston, Jason D
• Re: ATAPI tape drives broken with libata
  • From: Alan Cox
• Re: hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
  • From: Alan Cox
• shut down msg
  • From: Bruno Buys
• PROBLEM: kernel 2.6.22.6 pata_pdc202xx_old.c limiting to UDMA/33 instead of UDMA/100 (UPDATED 2.6.22.6)
  • From: n
• Re: [PATCH 1/1] AVR32 PATA driver
  • From: Jeff Garzik
• Re: [PATCH take #6] [libata] libata driver for bf548 on chip ATAPI controller.
  • From: Jeff Garzik
• Re: [PATCH libata-dev#upstream REGENERATED] libata: move EH repeat reporting into ata_eh_report()
  • From: Jeff Garzik
• Re: [PATCH libata-dev#upstream 3/3 REGENERATED] libata: implement and use ata_port_desc() to report port configuration
  • From: Jeff Garzik
• Re: [PATCH 2.6.23-rc3] libata: pata_pdc2027x PLL detection minor cleanup
  • From: Jeff Garzik
• Re: [PATCH] libata: Strict checking for identify reporting
  • From: Jeff Garzik
• Re: [PATCH] libata: Spot bridge chips
  • From: Jeff Garzik
• Re: [PATCH] libata-portmap: Remove unused definitions
  • From: Jeff Garzik
• Re: [PATCH] libata: Switch most of the remaining SFF drivers to ata_sff_port_start
  • From: Jeff Garzik
• Re: [PATCH 1/2 #upstream] libata: udpate ata_dev_try_classify() arguments
  • From: Jeff Garzik
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
  • From: John Sigler
• Re: hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
  • From: John Sigler
• Re: [PATCH #upstream-fixes] libata: implement BROKEN_HPA horkage and apply it to affected drives
  • From: Jeff Garzik
• Re: [PATCH 2.6.23-rc4] sata_promise: FastTrack TX4200 is a second-generation chip
  • From: Jeff Garzik
• Re: [PATCH 8/8] ata: add ATA_MWDMA* and ATA_SWDMA* defines
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] ata_piix: add Satellite U200 to broken suspend list
  • From: Jeff Garzik
• Re: [PATCH] pata_marvell: Add more identifiers
  • From: Jeff Garzik
• Re: [PATCH 2.6.23-rc4][reRESEND] ata_piix: IDE mode SATA patch for Intel Tolapai
  • From: Jeff Garzik
• Re: [PATCH 2.6.23-rc4][reRESEND] ahci: RAID mode SATA patch for Intel Tolapai
  • From: Jeff Garzik
• Re: [PATCH 2.6.23-rc4][reRESEND] ata_piix: IDE mode SATA patch for Intel Tolapai
  • From: Jeff Garzik
• Re: [PATCH] libata-core: Allow translation setting to fail
  • From: Jeff Garzik
• [PATCH 2.6.23-rc4][reRESEND] ata_piix: IDE mode SATA patch for Intel Tolapai
  • From: Jason Gaston
• [PATCH 2.6.23-rc4][reRESEND] ahci: RAID mode SATA patch for Intel Tolapai
  • From: Jason Gaston
• Re: [PATCH 2.6.23-rc4][RESEND] ahci: RAID mode SATA patch for Intel Tolapai
  • From: Jeremy Higdon
• RE: [PATCH 2.6.23-rc4][RESEND] ahci: RAID mode SATA patch for Intel Tolapai
  • From: Gaston, Jason D
• [PATCH 2.6.23-rc4][RESEND] ahci: RAID mode SATA patch for Intel Tolapai
  • From: Jason Gaston
• [PATCH 2.6.23-rc4][RESEND] ata_piix: IDE mode SATA patch for Intel Tolapai
  • From: Jason Gaston
• Re: hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
  • From: Alan Cox
• [PATCH 2.6.23-rc4] ata_piix: IDE mode SATA patch for Intel Tolapai
  • From: Jason Gaston
• [PATCH 2.6.23-rc4] ahci: RAID mode SATA patch for Intel Tolapai
  • From: Jason Gaston
• Re: Problems with IDE on linux 2.6.22.X
  • From: Rene Herman
• Re: Problems with IDE on linux 2.6.22.X
  • From: Lennart Sorensen
• Re: Problems with IDE on linux 2.6.22.X
  • From: Greg Freemyer
• Re: Problems with IDE on linux 2.6.22.X
  • From: Rene Herman
• Re: Problems with IDE on linux 2.6.22.X
  • From: Lennart Sorensen
• Re: Problems with IDE on linux 2.6.22.X
  • From: Jan Engelhardt
• Re: ATAPI tape drives broken with libata
  • From: Chuck Ebbert
• Re: hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
  • From: John Sigler
• Re: hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
  • From: Alan Cox
• Re: hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
  • From: John Sigler
• hard drive ioctl's
  • From: Kantor Zsolt
• Re: hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
  • From: John Sigler
• Re: Port Multiplier Patch 2.6.22.1 on Alpha
  • From: Tom Evans
• Re: Port Multiplier Patch 2.6.22.1 on Alpha
  • From: Jeff Garzik
• Re: ATAPI tape drives broken with libata
  • From: Jeff Garzik
• Port Multiplier Patch 2.6.22.1 on Alpha
  • From: Tom Evans
• Re: ATAPI tape drives broken with libata
  • From: Alan Cox
• ATAPI tape drives broken with libata
  • From: Chuck Ebbert
• Re: ST340823A disk size issue - Revisited
  • From: Eddie Atherton
• Re: [PATCH 1/10] ide: use pci_dev->revision
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/10] ide: use pci_dev->revision
  • From: Kok, Auke
• [PATCH 10/10] ide: remove .init_setup from ide_pci_device_t
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 9/10] serverworks: remove ->init_setup
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 8/10] scc_pata: remove ->init_setup
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 7/10] pdc202xx_old: remove ->init_setup
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/10] hpt366: remove ->init_setup
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/10] pdc202xx_new: remove ->init_setup
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/10] cmd64x: remove ->init_setup
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/10] aec62xx: remove ->init_setup
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/10] ide: use I/O ops directly part #2
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/10] ide: use pci_dev->revision
  • From: Bartlomiej Zolnierkiewicz
• Re: HSM violation spew.
  • From: Dave Jones
• HSM violation spew.
  • From: Dave Jones
• Re: hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
  • From: Alan Cox
• hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
  • From: John Sigler
• [1/2] 2.6.23-rc3: known regressions with patches
  • From: Michal Piotrowski
• Re: [PATCH] Prefix each line of multiline printk(KERN_<level> "foo\nbar") with KERN_<level>
  • From: Maciej W. Rozycki
• [PATCH 2.6.23-rc4] sata_promise: FastTrack TX4200 is a second-generation chip
  • From: Mikael Pettersson
• [PATCH #upstream-fixes] libata: implement BROKEN_HPA horkage and apply it to affected drives
  • From: Tejun Heo
• Re: Problems with IDE on linux 2.6.22.X
  • From: Rene Herman
• Re: Resets on sil3124 & sil3726 PMP
  • From: Jim Paris
• sata_nv; port responding too slow
  • From: Jan Engelhardt
• Re: [PATCHSET #upstream-fixes] libata: update HPA handling
  • From: Jeff Garzik
• Re: Problems with disc-performance and libata
  • From: Oliver Janscheidt
• Re: PMP performance (was Re: Resets on sil3124 & sil3726 PMP)
  • From: Robin H. Johnson
• Re: Problems with IDE on linux 2.6.22.X
  • From: José Luis Patiño Andrés
• PMP performance (was Re: Resets on sil3124 & sil3726 PMP)
  • From: Richard Scobie
• Re: Resets on sil3124 & sil3726 PMP
  • From: Robin H. Johnson
• Re: [Bugme-new] [Bug 8936] New: sata_promise 2.09 fails to identify ST3400832AS
  • From: Andrew Morton
• [-mm patch] unexport noautodma
  • From: Adrian Bunk
• [PATCH 10/8] ide: add ->mwdma_mask and ->swdma_mask to ide_pci_device_t
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 9/8] pdc202xx_old: remove broken SWDMA support
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 8/8] ata: add ATA_MWDMA* and ATA_SWDMA* defines
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/8] ide: add IDE_HFLAG_NO_ATAPI_DMA host flag
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/8] ide: add IDE_HFLAG_NO_{DMA,AUTODMA} host flags
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/8] ide: remove ->init_setup_dma from ide_pci_device_t
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 7/8] ide: add IDE_HFLAG_NO_LBA48 and IDE_HFLAG_NO_LBA48_DMA host flags
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/8] ide: add IDE_HFLAG_BOOTABLE host flag
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/8] amd74xx: remove /proc/ide/amd74xx
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/8] amd74xx/via82cxxx: don't initialize drive->dn
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] pdc202xx_new: fix PCI refcounting
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/4] ide: add ide_dev_is_sata() helper (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/4] hpt366: UltraDMA filter for SATA cards (take 3)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] mpc8xx: Only build mpc8xx on arch/ppc
  • From: Bartlomiej Zolnierkiewicz
• Re: Fwd: Re: libata pmp support
  • From: Izik Weksler
• Re: Fwd: Re: libata pmp support
  • From: Tejun Heo
• RE: Fwd: Re: libata pmp support
  • From: Weksler Izik
• Re: Resets on sil3124 & sil3726 PMP
  • From: Richard Scobie
• Re: [PATCH][resend] fix IDE legacy mode resources
  • From: Jan Beulich
• Re: Resets on sil3124 & sil3726 PMP
  • From: Petr Vandrovec
• Re: Problems with disc-performance and libata
  • From: Oliver Janscheidt
• Re: Resets on sil3124 & sil3726 PMP
  • From: Richard Scobie
• Re: [PATCHSET #upstream-fixes] libata: update HPA handling
  • From: Tejun Heo
• Re: Need help
  • From: Tejun Heo
• Re: Fwd: Re: libata pmp support
  • From: Tejun Heo
• Re: Resets on sil3124 & sil3726 PMP
  • From: Tejun Heo
• Re: Problems with disc-performance and libata
  • From: Michal Piotrowski
• Re: [2.6.22.5] irq X: nobody cared but X is successfully used by libata
  • From: Michal Piotrowski
• Re: libata not working for sis5533
  • From: Michal Piotrowski
• Re: Stardom SATA HSM violation
  • From: Michal Piotrowski
• Re: Resets on sil3124 & sil3726 PMP
  • From: Rusty Conover
• Re: Fwd: Re: libata pmp support
  • From: Izik Weksler
• Re: [PATCH 1/2] pdc202xx_new: fix PCI refcounting
  • From: Sergei Shtylyov
• Fwd: Intel 82801G (ICH7) SATA port reset
  • From: Joris
• Re: [PATCH] Prefix each line of multiline printk(KERN_<level> "foo\nbar") with KERN_<level>
  • From: Geert Uytterhoeven
• Re: [PATCH] Prefix each line of multiline printk(KERN_<level> "foo\nbar") with KERN_<level>
  • From: Mike Frysinger
• Re: Resets on sil3124 & sil3726 PMP
  • From: Tejun Heo
• Re: Fwd: Re: libata pmp support
  • From: Tejun Heo
• Re: 2.6.22.5 SATA Failure
  • From: Dong Feng
• Re: [PATCH] Prefix each line of multiline printk(KERN_<level> "foo\nbar") with KERN_<level>
  • From: Geert Uytterhoeven
• Re: 2.6.22.5 SATA Failure
  • From: Robert Hancock
• 2.6.22.5 SATA Failure
  • From: Dong Feng
• Re: [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
  • From: Sergei Shtylyov
• [PATCH 2/4] hpt366: UltraDMA filter for SATA cards (take 3)
  • From: Sergei Shtylyov
• [PATCH 2/4] hpt366: UltraDMA filter for SATA cards (take 2)
  • From: Sergei Shtylyov
• [PATCH 1/4] ide: add ide_dev_is_sata() helper (take 2)
  • From: Sergei Shtylyov
• Re: [Bugme-new] [Bug 8936] New: sata_promise 2.09 fails to identify ST3400832AS
  • From: Mikael Pettersson
• Re: [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
  • From: Sergei Shtylyov
• Re: readXs on pci*iomap-ped regions [Was: [PATCH] /drivers/char sx.c ioremap -> pci_ioremap api]
  • From: Alan Cox
• Re: [PATCH 1/1] Ata: pata_marvell, use ioread* for iomap-ped memory
  • From: Alan Cox
• Re: readXs on pci*iomap-ped regions [Was: [PATCH] /drivers/char sx.c ioremap -> pci_ioremap api]
  • From: Jiri Slaby
• Re: readXs on pci*iomap-ped regions [Was: [PATCH] /drivers/char sx.c ioremap -> pci_ioremap api]
  • From: Jeff Garzik
• readXs on pci*iomap-ped regions [Was: [PATCH] /drivers/char sx.c ioremap -> pci_ioremap api]
  • From: Jiri Slaby
• [PATCH 1/1] Ata: pata_marvell, use ioread* for iomap-ped memory
  • From: Jiri Slaby
• Re: [Bugme-new] [Bug 8936] New: sata_promise 2.09 fails to identify ST3400832AS
  • From: Andrew Morton
• Re: [PATCH][resend] fix IDE legacy mode resources
  • From: Greg KH
• [PATCH] Prefix each line of multiline printk(KERN_<level> "foo\nbar") with KERN_<level>
  • From: Joe Perches
• [PATCH #upstream-fixes] ata_piix: add Satellite U200 to broken suspend list
  • From: Tejun Heo
• Re: [PATCH][resend] fix IDE legacy mode resources
  • From: Andrew Morton
• Re: [PATCH 1/4] ide: add ide_dev_is_sata() helper
  • From: Sergei Shtylyov
• Re: [PATCH 2.6.23-rc3] pata_pdc2027x: PLL detection fixes
  • From: Sergei Shtylyov
• Re: [PATCH 2.6.23-rc3] pata_pdc2027x: PLL detection fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/4] hpt366: UltraDMA filter for SATA cards (take 2)
  • From: Sergei Shtylyov
• Re: [PATCH] hpt366: fix PCI clock detection for HPT374 (take 4)
  • From: Sergei Shtylyov
• Fwd: Re: libata pmp support
  • From: Izik Weksler
• Re: [PATCH][resend] fix IDE legacy mode resources
  • From: Alan Cox
• Re: [PATCH 2.6.23-rc3] pata_pdc2027x: PLL detection fixes
  • From: Sergei Shtylyov
• Re: [PATCH 2.6.23-rc3] pata_pdc2027x: PLL detection fixes
  • From: Sergei Shtylyov
• Re: [PATCH][resend] fix IDE legacy mode resources
  • From: Greg KH
• Re: Should sata_mv work with Highpoint RocketRAID 2300?
  • From: Alan Cox
• Re: Should sata_mv work with Highpoint RocketRAID 2300?
  • From: Jeff Garzik
• Re: Should sata_mv work with Highpoint RocketRAID 2300?
  • From: Karim 'Kasi Mir' Senoucci
• [PATCH][resend] fix IDE legacy mode resources
  • From: Yoichi Yuasa
• sata_via.c: TO DO: VT6421 PATA support
  • From: Tomasz Chmielewski
• [PATCH resubmit] /drivers/ata ioremap returncode check
  • From: Scott Thompson
• Re: File corruption in 2.6.18 thru 2.6.22
  • From: Neil Romig
• [PATCH] pata_marvell: Add more identifiers
  • From: Alan Cox
• [PATCH] pata_it821x: Fix regression/corruptor
  • From: Alan Cox
• Re: [PATCH resubmit] /drivers/ata ioremap returncode check
  • From: Brandon Philips
• Re: [PATCH resubmit] /drivers/ata ioremap returncode check
  • From: Alexey Dobriyan
• Re: ATA_PIIX + SATA_MV -> kernel ate my HDD
  • From: Tomasz Chmielewski
• Re: ATA_PIIX + SATA_MV -> kernel ate my HDD
  • From: Alan Cox
• ATA_PIIX + SATA_MV -> kernel ate my HDD
  • From: Tomasz Chmielewski
• Re: [PATCH] pata_marvell: Add another PCI identifier
  • From: Alan Cox
• Problem with pata_via and HL-DT-ST GCE-8525B cdrom with kernels 2.6.22+
  • From: Jose Alberto Reguero
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] libata: don't check n_sectors during revalidation if zero
  • From: Jeff Garzik
• Re: [PATCH] pata_via: Add Armia W730-K8 and other rebadgings
  • From: Jeff Garzik
• Re: [PATCH] pata_sis: Add the FSC Amilo and friends
  • From: Jeff Garzik
• Re: [PATCH 2.6.23-rc3] pata_pdc2027x: PLL detection fixes
  • From: Jeff Garzik
• Re: [PATCH] pata_marvell: Add another PCI identifier
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] libata: fix n_sectors failure handling during revalidation
  • From: Jeff Garzik
• Re: [PATCH] pata_via: Add Armia W730-K8 and other rebadgings
  • From: Mikael Pettersson
• [PATCH] sata_sil and PMP...
  • From: Petr Vandrovec
• Re: [PATCH resubmit] /drivers/ata ioremap returncode check
  • From: Brandon Philips
• [PATCH] mpc8xx: Only build mpc8xx on arch/ppc
  • From: Kumar Gala
• Re: libata pmp support
  • From: Tejun Heo
• [PATCH resubmit] /drivers/ata ioremap returncode check
  • From: Scott Thompson
• Re: [PATCH] hook ACPI _PSx method to IDE power on/off
  • From: Len Brown
• [PATCH #upstream-fixes] ata_piix: implement IOCFG bit18 quirk
  • From: Tejun Heo
• Re: no need to add new DID's to AHCI driver?
  • From: Tejun Heo
• Re: [PATCH] pata_marvell: Add another PCI identifier
  • From: Robin H. Johnson
• Re: File corruption in 2.6.18 thru 2.6.22
  • From: Dave Jones
• [PATCH] libata: Add a drivers/ide style DMA disable
  • From: Alan Cox
• [PATCH] libata: Strict checking for identify reporting
  • From: Alan Cox
• [PATCH] pata_marvell: Add another PCI identifier
  • From: Alan Cox
• [PATCH] libata: Allow for original IDE drives that don't support geometry setting
  • From: Alan Cox
• [PATCH] libata: Spot bridge chips
  • From: Alan Cox
• [PATCH]
  • From: Alan Cox
• [PATCH] libata-portmap: Remove unused definitions
  • From: Alan Cox
• [PATCH] pata_via: Add Armia W730-K8 and other rebadgings
  • From: Alan Cox
• [PATCH] pata_sis: Add the FSC Amilo and friends
  • From: Alan Cox
• [PATCH] libata: Switch most of the remaining SFF drivers to ata_sff_port_start
  • From: Alan Cox
• Re: no need to add new DID's to AHCI driver?
  • From: Jeff Garzik
• no need to add new DID's to AHCI driver?
  • From: Gaston, Jason D
• Re: 2.6.23-rc3-mm1
  • From: Andrew Morton
• Re: [PATCH ] /drivers/ata ioremap returncode check
  • From: Brandon Philips
• Re: 2.6.23-rc3-mm1
  • From: Torsten Kaiser
• Re: Problems with IDE on linux 2.6.22.X
  • From: Rene Herman
• Re: Problems with IDE on linux 2.6.22.X
  • From: Lennart Sorensen
• Re: Problems with IDE on linux 2.6.22.X
  • From: Rene Herman
• Re: PATA hotplug
  • From: Alan Cox
• Re: PATA hotplug
  • From: Paul Wakeman
• Re: [PATCH 2.6.23-rc3] pata_via cable override for Arima W730-K8
  • From: Alan Cox
• Re: Problems with IDE on linux 2.6.22.X
  • From: Alan Cox
• Re: Problems with IDE on linux 2.6.22.X
  • From: Kiko Piris
• [PATCH 2.6.23-rc3] pata_via cable override for Arima W730-K8
  • From: Mikael Pettersson
• Re: Resets on sil3124 & sil3726 PMP
  • From: Rusty Conover
• Re: Resets on sil3124 & sil3726 PMP
  • From: Tejun Heo
• Re: Resets on sil3124 & sil3726 PMP
  • From: Rusty Conover
• Re: Resets on sil3124 & sil3726 PMP
  • From: Tejun Heo
• Re: Resets on sil3124 & sil3726 PMP
  • From: Rusty Conover
• Re: Resets on sil3124 & sil3726 PMP
  • From: Tejun Heo
• Re: Resets on sil3124 & sil3726 PMP
  • From: Rusty Conover
• Re:
  • From: chia
• Re:
  • From: Tejun Heo
• Re: Resets on sil3124 & sil3726 PMP
  • From: Tejun Heo
• Re:
  • From: Tejun Heo
• Re: Problems with IDE on linux 2.6.22.X
  • From: Rene Herman
• [no subject]
  • From: chia-ming liu
• Re: [PATCH 2/4] hpt366: UltraDMA filter for SATA cards (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/4] ide: add ide_dev_is_sata() helper
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] hpt366: fix PCI clock detection for HPT374 (take 4)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/2] pdc202xx_new: switch to using pci_get_slot() (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] pdc202xx_new: fix PCI refcounting
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: fix PCI refcounting
  • From: Bartlomiej Zolnierkiewicz
• Re: sata_via: write errors on PATA drive connected to VT6421
  • From: Ondrej Zary
• Re: Question about "Disk might not be spun down properly"
  • From: Brandon Philips
• Re: sata_via: write errors on PATA drive connected to VT6421
  • From: Alan Cox
• Question about "Disk might not be spun down properly"
  • From: Vahid
• Re: [PATCH 2.6.23-rc3] pata_pdc2027x: PLL detection fixes
  • From: Albert Lee
• [PATCH take #6] [libata] libata driver for bf548 on chip ATAPI controller.
  • From: Sonic Zhang
• 4 Port eSATA RAID5/JBOD PCI-E 8x Controller
  • From: Richard Scobie
• Re: Resets on sil3124 & sil3726 PMP
  • From: Rusty Conover
• [git patches] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• sata_via: write errors on PATA drive connected to VT6421
  • From: Ondrej Zary
• Re: Resets on sil3124 & sil3726 PMP
  • From: Rusty Conover
• Re: [PATCH #upstream-fixes 2/2] libata: prevent EH from being scheduled after port is detached
  • From: Tejun Heo
• [PATCH #upstream-fixes 2/2] libata: prevent EH from being scheduled after port is detached
  • From: Tejun Heo
• [PATCH #upstream-fixes 1/2] libata: invert ATA_PFLAG_INITIALIZING to RUNNING
  • From: Tejun Heo
• [PATCH 2.6.23-rc3] libata: pata_pdc2027x PLL detection minor cleanup
  • From: Albert Lee
• Re: CompactFlash and HD unhappy together on the same IDE channel
  • From: Malcolm Gillies
• Re: [PATCH 2.6.23-rc3] pata_pdc2027x: PLL detection fixes
  • From: Jeff Garzik
• [PATCH 2/4] hpt366: UltraDMA filter for SATA cards (take 2)
  • From: Sergei Shtylyov
• [PATCH 1/4] ide: add ide_dev_is_sata() helper
  • From: Sergei Shtylyov
• Re: [PATCH 2.6.23-rc3] pata_pdc2027x: PLL detection fixes
  • From: Sergei Shtylyov
• Re: [PATCH 2.6.23-rc3] pata_pdc2027x: PLL detection fixes
  • From: Mikael Pettersson
• Re: PATA hotplug
  • From: Alan Cox
• Re: CompactFlash and HD unhappy together on the same IDE channel
  • From: Alan Cox
• Re: SATA error while resume
  • From: Maciek Rutecki
• Re: [PATCH 2.6.23-rc3] pata_pdc2027x: PLL detection fixes
  • From: Sergei Shtylyov
• Re: SATA error while resume
  • From: Tejun Heo
• Re: SATA error while resume
  • From: Maciek Rutecki
• [PATCH 2/2] pdc202xx_new: switch to using pci_get_slot() (take 2)
  • From: Sergei Shtylyov
• Re: [PATCH 6/7] ide: remove CONFIG_IDEDMA_ONLYDISK
  • From: Sergei Shtylyov
• Re: SATA error while resume
  • From: Mark Lord
• Re: [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
  • From: Sergei Shtylyov
• Re: CompactFlash and HD unhappy together on the same IDE channel
  • From: Mark Lord
• Re: [PATCH 5/7] ide: add "hdx=nodma" kernel parameter
  • From: Sergei Shtylyov
• Re: [PATCH 3/7] ide: remove "idex=dma" kernel parameter
  • From: Sergei Shtylyov
• Re: [PATCH 2/7] ide: remove CONFIG_BLK_DEV_IDEDMA_FORCED
  • From: Sergei Shtylyov
• Re: Marvell 6141 - Am I too early?
  • From: Micael Beronius
• Re: SATA error while resume
  • From: Tejun Heo
• Re: CompactFlash and HD unhappy together on the same IDE channel
  • From: Malcolm Gillies
• SATA error while resume
  • From: Maciek Rutecki
• Re: Bad CD disk disables IDE DMA
  • From: Zoltan Boszormenyi
• Re: Enabling AHCI on ICH7 without BIOS support
  • From: Tejun Heo
• Re: Enabling AHCI on ICH7 without BIOS support
  • From: Török Edwin
• Re: Enabling AHCI on ICH7 without BIOS support
  • From: Tejun Heo
• Re: Enabling AHCI on ICH7 without BIOS support
  • From: ISHIKAWA Mutsumi
• Re: CompactFlash and HD unhappy together on the same IDE channel
  • From: Mark Lord
• Re: [PATCH 2.6.23-rc3] pata_pdc2027x: PLL detection fixes
  • From: Albert Lee
• Re: [PATCH 2.6.23-rc3] pata_pdc2027x: PLL detection fixes
  • From: Jeff Garzik
• Re: [PATCH 2.6.23-rc3] pata_pdc2027x: PLL detection fixes
  • From: Albert Lee
• Re: [PATCH 2.6.23-rc3] pata_pdc2027x: PLL detection fixes
  • From: Albert Lee
• Re: CompactFlash and HD unhappy together on the same IDE channel
  • From: Alan Cox
• Re: sata_nv hotplug
  • From: Daniel Schroeder
• Re: [PATCH 2.6.23-rc3] pata_pdc2027x: PLL detection fixes
  • From: Jeff Garzik
• [PATCH 2.6.23-rc3] pata_pdc2027x: PLL detection fixes
  • From: Mikael Pettersson
• Re: CompactFlash and HD unhappy together on the same IDE channel
  • From: Matt Sealey
• Re: [PATCH 1/8] alim15x3: PIO fallback fix
  • From: Sergei Shtylyov
• sata_nv hotplug
  • From: Benjamin LaHaise
• Re: [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/8] alim15x3: PIO fallback fix
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/7] ide: remove CONFIG_IDEDMA_ONLYDISK
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/7] ide: remove "idex=dma" kernel parameter
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/7] ide: add "hdx=nodma" kernel parameter
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 7/7] ide: add DECLARE_GENERIC_PCI_DEV() macro to generic IDE PCI host driver
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/7] ide: remove hwif->autodma and drive->autodma
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/7] ide: remove CONFIG_BLK_DEV_IDEDMA_FORCED
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/7] ide: use PCI_VDEVICE() macro
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: fix PCI refcounting
  • From: Sergei Shtylyov
• [PATCH 2/2] pdc202xx_new: switch to using pci_get_slot()
  • From: Sergei Shtylyov
• [PATCH 1/2] pdc202xx_new: fix PCI refcounting
  • From: Sergei Shtylyov
• File corruption in 2.6.18 thru 2.6.22
  • From: Neil Romig
• Re: [PATCH 1/8] alim15x3: PIO fallback fix
  • From: Sergei Shtylyov
• CompactFlash and HD unhappy together on the same IDE channel
  • From: Malcolm Gillies
• [PATCH libata-dev#upstream REGENERATED] libata: move EH repeat reporting into ata_eh_report()
  • From: Tejun Heo
• [PATCH libata-dev#upstream 3/3 REGENERATED] libata: implement and use ata_port_desc() to report port configuration
  • From: Tejun Heo
• Re: [PATCH 1/1] libata: pata_pdc2027x PLL input clock fix
  • From: Mikael Pettersson
• Re: [PATCH] advertise correct IDE mode on Pegasos2
  • From: Olaf Hering
• [PATCH] advertise correct IDE mode on Pegasos2
  • From: Olaf Hering
• Re: [PATCH] advertise correct IDE mode on Pegasos2
  • From: Matt Sealey
• Re: Resets on sil3124 & sil3726 PMP
  • From: Tejun Heo
• Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
  • From: Sergei Shtylyov
• [RFC] Sandisk DOC H3 Linux driver
  • From: Vladislav Buzov
• PATA hotplug
  • From: Paul Wakeman
• Re: [PATCH] [428/2many] MAINTAINERS - SERIAL ATA (SATA) SUBSYSTEM:
  • From: Joe Perches
• Re: [PATCH] [428/2many] MAINTAINERS - SERIAL ATA (SATA) SUBSYSTEM:
  • From: Sergei Shtylyov
• Re: [PATCH] pata_cmd64x: Set up MWDMA modes properly
  • From: Sergei Shtylyov
• Re: [PATCH] pata_cmd64x: Set up MWDMA modes properly
  • From: Sergei Shtylyov
• Re: [PATCH] advertise correct IDE mode on Pegasos2
  • From: Olaf Hering
• [PATCH] advertise correct IDE mode on Pegasos2
  • From: Olaf Hering
• Re: sata_sil, sil3512, and PMP?
  • From: Petr Vandrovec
• [PATCH #upstream-fixes] libata: don't check n_sectors during revalidation if zero
  • From: Tejun Heo
• Re: [PATCH take #5] [libata] libata driver for bf548 on chip ATAPI controller.
  • From: Bryan Wu
• Re: [PATCH] libata: kill sector_buf temporary buffer
  • From: Jeff Garzik
• Re: [PATCH 1/1] libata: pata_pdc2027x PLL input clock fix
  • From: Alan Cox
• Re: [PATCH 1/1] libata: pata_pdc2027x PLL input clock fix
  • From: Jeff Garzik
• Re: [PATCH] libata-core: support wildcard matching in ata_blacklist_entry
  • From: Jeff Garzik
• Re: [PATCH take #5] [libata] libata driver for bf548 on chip ATAPI controller.
  • From: Jeff Garzik
• Re: sata_nv + ADMA + Samsung disk problem
  • From: Jim Paris
• Re: [PATCH take #5] [libata] libata driver for bf548 on chip ATAPI controller.
  • From: Mike Frysinger
• Re: [PATCH take #5] [libata] libata driver for bf548 on chip ATAPI controller.
  • From: Jeff Garzik
• ICH7: proposition for supporting AHCI along with native IDE
  • From: Jonathan Bastien-Filiatrault
• Re: adding Pegasus IDE quirk for pata_via
  • From: Olaf Hering
• Re: adding Pegasus IDE quirk for pata_via
  • From: Olaf Hering
• Re: [PATCH take #5] [libata] libata driver for bf548 on chip ATAPI controller.
  • From: Mike Frysinger
• Re: sata_nv + ADMA + Samsung disk problem
  • From: Gabor Gombas
• Re: sata drive loosing connection/resetting port
  • From: Andreas Radke
• Re: Enabling AHCI on ICH7 without BIOS support
  • From: Tejun Heo
• Re: Enabling AHCI on ICH7 without BIOS support
  • From: Jonathan Bastien-Filiatrault
• Re: Bad CD disk disables IDE DMA
  • From: Zoltan Boszormenyi
• Re: look at this log!!!
  • From: Tejun Heo
• Re: Enabling AHCI on ICH7 without BIOS support
  • From: Tejun Heo
• Re: booting from MD raid using libata
  • From: sommere
• Re: Bad CD disk disables IDE DMA
  • From: Zoltan Boszormenyi
• Re: Bad CD disk disables IDE DMA
  • From: Bodo Eggert
• Re: booting from MD raid using libata
  • From: Tejun Heo
• Re: Bad CD disk disables IDE DMA
  • From: Zoltan Boszormenyi
• Re: Still having problems with sata_promise on all late kernels - shutdown too - BISECTED
  • From: Brad Campbell
• Re: Still having problems with sata_promise on all late kernels - shutdown too - BISECTED
  • From: Tejun Heo
• Re: [PATCHSET #upstream-fixes] libata: update HPA handling
  • From: Tejun Heo
• Re: booting from MD raid using libata
  • From: Tejun Heo
• Re: sata drive loosing connection/resetting port
  • From: Tejun Heo
• Re: [PATCH] libata: kill sector_buf temporary buffer
  • From: Alan Cox
• Re: [PATCH] libata: kill sector_buf temporary buffer
  • From: Jens Axboe
• Re: Bad CD disk disables IDE DMA
  • From: Michal Piotrowski
• Re: [PATCHSET #upstream-fixes] libata: update HPA handling
  • From: Jeff Garzik
• [PATCH] libata: kill sector_buf temporary buffer
  • From: Jeff Garzik
• Re: Still having problems with sata_promise on all late kernels - shutdown too - BISECTED
  • From: Brad Campbell
• Re: [PATCH] hpt366: fix PCI clock detection for HPT374 (take 4)
  • From: Bob Ham
• Re: [PATCH take #5] [libata] libata driver for bf548 on chip ATAPI controller.
  • From: Jeff Garzik
• Re: [PATCH 3/4] libata: ACPI checks for 80wire cable
  • From: Jeff Garzik
• Re: [PATCH 1/4] libata: ACPI checks for 80wire cable
  • From: Jeff Garzik
• Re: Still having problems with sata_promise on all late kernels - shutdown too - BISECTED
  • From: Tejun Heo
• RE: sata_sil, sil3512, and PMP?
  • From: vandrove
• RE: [patch 2/4] scsi: expose AN support to user space
  • From: Moore, Eric
• Re: regression problem with Maxtor disk
  • From: Robert Hancock
• AVIS AUX ETUDIANTS DESIRANTS DES BOURSES D?ETUDES
  • From: intercible infos intercible infos
• Re: regression problem with Maxtor disk
  • From: Lieven Marchand
• ST340823A disk size issue - Revisited
  • From: Eddie Atherton
• RE: sata_sil, sil3512, and PMP?
  • From: Eunice Chen
• Re: [PATCH 2/4] libata: implement BROKEN_HPA horkage and apply to affected drives
  • From: Tejun Heo
• Re: [PATCH 2/4] libata: implement BROKEN_HPA horkage and apply to affected drives
  • From: Alan Cox
• [PATCH 3/4] libata: clean up read/set native_max address functions
  • From: Tejun Heo
• [PATCH 2/4] libata: implement BROKEN_HPA horkage and apply to affected drives
  • From: Tejun Heo
• [PATCH 1/4] libata: move ata_id_n_sectors() upward
  • From: Tejun Heo
• [PATCHSET #upstream-fixes] libata: update HPA handling
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes] libata: fix n_sectors failure handling during revalidation
  • From: Alan Cox
• [PATCH #upstream-fixes] libata: fix n_sectors failure handling during revalidation
  • From: Tejun Heo
• Re: Early ATA devices
  • From: Alan Cox
• Re: Early ATA devices
  • From: Erik Mouw
• Re: Still having problems with sata_promise on all late kernels
  • From: Brad Campbell
• Re: [patch 2/4] scsi: expose AN support to user space
  • From: Kristen Carlson Accardi
• Re: [patch 1/4] libata: check for AN support
  • From: Kristen Carlson Accardi
• Re: Still having problems with sata_promise on all late kernels - shutdown too - BISECTED
  • From: Brad Campbell
• Re: Still having problems with sata_promise on all late kernels
  • From: Mikael Pettersson
• Re: Resets on sil3124 & sil3726 PMP
  • From: Rusty Conover
• Re: [patch 2/4] scsi: expose AN support to user space
  • From: James Bottomley
• Re: [PATCH] ST340823A, HPA and libata
  • From: Mikko Rapeli
• Re: sata drive loosing connection/resetting port
  • From: Andreas Radke
• sata_sil, sil3512, and PMP?
  • From: Petr Vandrovec
• booting from MD raid using libata
  • From: Ethan Sommer
• Accessing CDROM drive in laptop SATA/PATA hardware config
  • From: Thomas Hahn
• Re: [PATCH take #5] [libata] libata driver for bf548 on chip ATAPI controller.
  • From: Alan Cox
• [git patches] libata fixes
  • From: Jeff Garzik
• [PATCH take #5] [libata] libata driver for bf548 on chip ATAPI controller.
  • From: Sonic Zhang
• Re: look at this log!!! - no
  • From: MikeW
• Re: [PATCH libata-dev#upstream 2/2] libata: move EH repeat reporting into ata_eh_report()
  • From: Jeff Garzik
• Re: [PATCH libata-dev#upstream 1/3] libata: use ata_port_printk() in ata_wait_idle()
  • From: Jeff Garzik
• Re: [PATCH libata-dev#upstream 3/3] libata: implement and use ata_port_desc() to report port configuration
  • From: Jeff Garzik
• Re: [PATCH 1/1] AVR32 PATA driver
  • From: Kristoffer Nyborg Gregertsen
• Re: [patch 04/25] libata-add-irq_flags-to-struct-pata_platform_info-fix
  • From: Jeff Garzik
• Re: [patch 25/25] ata_piix: disallow UDMA 133 on ICH5 & ICH7
  • From: Jeff Garzik
• Re: [PATCH] ata_piix: add TECRA M7 to broken suspend list
  • From: Jeff Garzik
• Re: [PATCH 1/2] pata_hpt37x: actually clock HPT374 with 50 MHz DPLL (take 2)
  • From: Jeff Garzik
• Re: [PATCH] pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R]
  • From: Jeff Garzik
• Re: [patch 1/4] Store interrupt value
  • From: Jeff Garzik
• Re: [patch 2/4] scsi: expose AN support to user space
  • From: Jeff Garzik
• Re: [patch 4/4] libata: send event when AN received
  • From: Jeff Garzik
• Re: regression problem with Maxtor disk
  • From: Lieven Marchand
• Re: [patch 1/4] libata: check for AN support
  • From: Jeff Garzik
• Re: Still having problems with sata_promise on all late kernels
  • From: Tejun Heo
• Re: regression problem with Maxtor disk
  • From: Tejun Heo
• Re: Still having problems with sata_promise on all late kernels - shutdown too - BISECTED
  • From: Tejun Heo
• Re: [patch 24/25] pata_cmd64x: Set up MWDMA modes properly
  • From: Jeff Garzik
• Re: [PATCH] libata: Note that our cache flush code needs fixing up
  • From: Jeff Garzik
• Re: [PATCH] libata-core: Document some limits/assumptions about ID_ATA
  • From: Jeff Garzik
• Re: [2.6.23-rc3] Regression: "spurious completions during NCQ"
  • From: Tejun Heo
• Re: [PATCH RE-UPDATED] libata: add support for ATA_16 on ATAPI
  • From: Jeff Garzik
• Re: [2.6.23-rc3] Regression: "spurious completions during NCQ"
  • From: Frans Pop
• Re: [PATCH 1/2] libata: move ata_altstatus() to pio data xfer functions
  • From: Jeff Garzik
• Re: [PATCH] libata: Correct IORDY handling
  • From: Jeff Garzik
• Re: [PATCH 01/14] libata-link: introduce ata_link
  • From: Jeff Garzik
• Re: sata drive loosing connection/resetting port
  • From: Tejun Heo
• Re: Resets on sil3124 & sil3726 PMP
  • From: Tejun Heo
• Resets on sil3124 & sil3726 PMP
  • From: Rusty Conover
• Re: Should sata_mv work with Highpoint RocketRAID 2300?
  • From: Alan Cox
• Re: regression problem with Maxtor disk
  • From: Robert Hancock
• [-mm patch] unexport ide_tune_dma
  • From: Adrian Bunk
• [-mm patch] unexport ide_acpi_set_state
  • From: Adrian Bunk
• [-mm patch] make drivers/ata/libata-scsi.c:ata_scsi_link_pm_policy() static
  • From: Adrian Bunk
• Re: sata drive loosing connection/resetting port
  • From: Andreas Radke
• Re: Should sata_mv work with Highpoint RocketRAID 2300?
  • From: Karim 'Kasi Mir' Senoucci
• look at this log!!!
  • From: babl
• Re: Should sata_mv work with Highpoint RocketRAID 2300?
  • From: Alan Cox
• Should sata_mv work with Highpoint RocketRAID 2300?
  • From: Karim 'Kasi Mir' Senoucci
• Re: Still having problems with sata_promise on all late kernels - shutdown too - BISECTED
  • From: Brad Campbell
• Re: Still having problems with sata_promise on all late kernels
  • From: Brad Campbell
• Enabling AHCI on ICH7 without BIOS support
  • From: Jonathan Bastien-Filiatrault
• Re: [patch 0/4] Updated AN patches, now without gendisk
  • From: Kay Sievers
• Re: sata_nv + ADMA + Samsung disk problem
  • From: Gabor Gombas
• [PATCH] ata_piix: add TECRA M7 to broken suspend list
  • From: Tejun Heo
• Re: Still having problems with sata_promise on all late kernels
  • From: Brad Campbell
• Re: Still having problems with sata_promise on all late kernels
  • From: Tejun Heo
• Re: sata drive loosing connection/resetting port
  • From: Tejun Heo
• Re: Sil3124: IRQ loss errata on PCI-X
  • From: Tejun Heo
• Re: [2.6.23-rc3] Regression: "spurious completions during NCQ"
  • From: Tejun Heo
• Re: regression problem with Maxtor disk
  • From: Tejun Heo
• Re: sata_nv + ADMA + Samsung disk problem
  • From: Tejun Heo
• [patch 04/12] ata_piix: update map 10b for ich8m
  • From: Greg KH
• Re: [PATCH 1/1] AVR32 PATA driver
  • From: Kristoffer Nyborg Gregertsen
• [PATCH 1/1] AVR32 PATA driver
  • From: Kristoffer Nyborg Gregertsen
• DMA problem with HighPoint R100 and DVD drive
  • From: Ian Bruce
• [PATCH try 4] [libata] libata driver for bf548 on chip ATAPI controller.
  • From: Sonic Zhang
• Re: Still having problems with sata_promise on all late kernels - shutdown too
  • From: Brad Campbell
• [PATCH try 3] [libata] libata driver for bf548 on chip ATAPI controller.
  • From: Sonic Zhang
• Still having problems with sata_promise on all late kernels
  • From: Brad Campbell
• [PATCH again] [libata] libata driver for bf548 on chip ATAPI controller.
  • From: Sonic Zhang
• Re: [PATCH] [428/2many] MAINTAINERS - SERIAL ATA (SATA) SUBSYSTEM:
  • From: Joe Perches
• Re: sata drive loosing connection/resetting port
  • From: Michal Piotrowski
• Sil3124: IRQ loss errata on PCI-X
  • From: Fajun Chen
• [2.6.23-rc3] Regression: "spurious completions during NCQ"
  • From: Frans Pop
• Re: [patch 3/4] Enable link power management for ata drivers
  • From: Kristen Carlson Accardi
• Re: [patch 0/4] Updated AN patches, now without gendisk
  • From: Kristen Carlson Accardi
• Problems with the sata_promise driver while using smart.
  • From: Ole-Christian S. Hagenes
• Re: sata-via failure on 2.6.22 for via 6421 chipset (Was: Libata PATA status)
  • From: Alan Cox
• Re: [PATCH] pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R]
  • From: Alan Cox
• Re: libata git tree, mbox queue status and contents
  • From: Jens Axboe
• Re: [PATCH] [libata] libata driver for bf548 on chip ATAPI controller.
  • From: Alan Cox
• Re: [PATCH] [241/2many] MAINTAINERS - IDE/ATAPI CDROM DRIVER
  • From: Alan Cox
• Re: [PATCH] [428/2many] MAINTAINERS - SERIAL ATA (SATA) SUBSYSTEM:
  • From: Alan Cox
• [PATCH] [libata] libata driver for bf548 on chip ATAPI controller.
  • From: Sonic Zhang
• Re: FW: Libata
  • From: babl
• RE: Libata
  • From: Paul Fryer
• FW: Libata
  • From: Paul Fryer
• [PATCH] [428/2many] MAINTAINERS - SERIAL ATA (SATA) SUBSYSTEM:
  • From: joe
• [PATCH] [390/2many] MAINTAINERS - PROMISE SATA TX2/TX4 CONTROLLER LIBATA DRIVER
  • From: joe
• [PATCH] [241/2many] MAINTAINERS - IDE/ATAPI CDROM DRIVER
  • From: joe
• [PATCH] [240/2many] MAINTAINERS - IDE SUBSYSTEM
  • From: joe
• Re: regression problem with Maxtor disk
  • From: babl
• regression problem with Maxtor disk
  • From: Lieven Marchand
• Re: pata_ali exceptions (timeout)
  • From: Frederik Himpe
• Re: [PATCH] pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R]
  • From: Mikael Pettersson
• Re: [PATCH] pata_cmd64x: Set up MWDMA modes properly
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] pata_cmd64x: Set up MWDMA modes properly
  • From: Alan Cox
• Re: [PATCH] pata_cmd64x: Set up MWDMA modes properly
  • From: Sergei Shtylyov
• [PATCH] hpt366: fix PCI clock detection for HPT374 (take 4)
  • From: Sergei Shtylyov
• Re: [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
  • From: Sergei Shtylyov
• Re: [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
  • From: Sergei Shtylyov
• Re: [PATCH 3/11] au1xxx-ide: use ide_tune_dma()
  • From: Sergei Shtylyov
• Re: [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
  • From: Sergei Shtylyov
• Re: [PATCH 3/11] au1xxx-ide: use ide_tune_dma()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/11] au1xxx-ide: use ide_tune_dma()
  • From: Sergei Shtylyov
• Re: [PATCH 3/11] au1xxx-ide: use ide_tune_dma()
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
  • From: Sergei Shtylyov
• Re: [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
  • From: Sergei Shtylyov
• Re: [patch 0/4] Updated AN patches, now without gendisk
  • From: Kay Sievers
• Re: pata_ali exceptions (timeout)
  • From: Andrey Borzenkov
• pata_ali exceptions (timeout)
  • From: Frederik Himpe
• Re: [patch 3/4] Enable link power management for ata drivers
  • From: Valdis . Kletnieks
• Re: Disk spin down issue on shut down/suspend to disk
  • From: Robert Hancock
• Re: [PATCH 3/11] au1xxx-ide: use ide_tune_dma()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
  • From: Bartlomiej Zolnierkiewicz
• [patch 17/25] libata: correct IORDY handling
  • From: akpm
• [patch 24/25] pata_cmd64x: Set up MWDMA modes properly
  • From: akpm
• [patch 13/25] libata: ACPI checks for 80wire cable: implementation
  • From: akpm
• [patch 18/25] libata: add human-readable error value decoding
  • From: akpm
• [patch 14/25] libata: ACPI checks for 80wire cable: use in pata_amd
  • From: akpm
• [patch 25/25] ata_piix: disallow UDMA 133 on ICH5 & ICH7
  • From: akpm
• [patch 11/25] ALPM: enable Aggressive Link Power management for AHCI controllers.
  • From: akpm
• [patch 23/25] ST340823A, HPA and libata
  • From: akpm
• [patch 10/25] ALPM: enable link power management for ata drivers
  • From: akpm
• [patch 20/25] scsi: expose AN support to user space
  • From: akpm
• [patch 15/25] libata: ACPI checks for 80wire cable: use in pata_via
  • From: akpm
• [patch 12/25] libata: ACPI checks for 80wire cable: headers
  • From: akpm
• [patch 19/25] libata: check for AN support
  • From: akpm
• [patch 22/25] libata: send event when AN received
  • From: akpm
• [patch 21/25] libata: expose AN to user space
  • From: akpm
• [patch 16/25] Fix libata warnings with CONFIG_PM=n
  • From: akpm
• [patch 07/25] libata: adjust libata to ignore errors after spinup
  • From: akpm
• [patch 08/25] ALPM: store interrupt value
  • From: akpm
• [patch 06/25] sata_nv: allow changing queue depth
  • From: akpm
• [patch 09/25] ALPM: increase number of allowable device flags
  • From: akpm
• [patch 01/25] pata_acpi: restore driver
  • From: akpm
• [patch 02/25] pata_acpi: rework the ACPI drivers based upon experience of what the BIOS can do
  • From: akpm
• [patch 04/25] libata-add-irq_flags-to-struct-pata_platform_info-fix
  • From: akpm
• [patch 05/25] ata: add the SW NCQ support to sata_nv for MCP51/MCP55/MCP61
  • From: akpm
• [patch 03/25] libata: implement ata_wait_after_reset()
  • From: akpm
• Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs) II
  • From: Andi Kleen
• Re: [PATCH 3/11] au1xxx-ide: use ide_tune_dma()
  • From: Sergei Shtylyov
• Re: [PATCH 2/11] it8213/piix/slc90e66: remove {it8213,piix,slc90e66}_dma_2_pio()
  • From: Sergei Shtylyov
• [PATCH] hpt366: fix PCI clock detection for HPT374 (take 3)
  • From: Sergei Shtylyov
• Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs) II
  • From: James Bottomley
• [PATCH] hpt366: fix PCI clock detection for HPT374
  • From: Sergei Shtylyov
• Re: [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
  • From: Sergei Shtylyov
• Re: [PATCH] pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R]
  • From: Alan Cox
• Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
  • From: Alan Cox
• Re: [PATCH 2/4] it8213/piix/slc90e66: "de-couple" PIO and UDMA modes
  • From: Sergei Shtylyov
• [PATCH 2/2] pata_hpt{37x|3x2n}: fix clock reporting (take 2)
  • From: Sergei Shtylyov
• [PATCH 1/2] pata_hpt37x: actually clock HPT374 with 50 MHz DPLL (take 2)
  • From: Sergei Shtylyov
• Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs) II
  • From: Alan Cox
• Re: [PATCH 2/11] it8213/piix/slc90e66: remove {it8213,piix,slc90e66}_dma_2_pio()
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] pata_hpt37x: actually clock HPT374 by 50 MHz DPLL
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] pata_hpt37x: actually clock HPT374 by 50 MHz DPLL
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] pata_hpt37x: actually clock HPT374 by 50 MHz DPLL
  • From: Sergei Shtylyov
• Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs) II
  • From: James Bottomley
• Re: [PATCH] pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R]
  • From: Mikael Pettersson
• Re: [PATCH] pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R]
  • From: Alan Cox
• Re: [PATCH] pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R]
  • From: Alan Cox
• Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs) II
  • From: Alan Cox
• Re: [PATCH 1/2] pata_hpt37x: actually clock HPT374 by 50 MHz DPLL
  • From: Alan Cox
• Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs) II
  • From: Andi Kleen
• Re: problems while mounting /boot partition
  • From: Jan Engelhardt
• Re: [PATCH 1/2] pata_hpt37x: actually clock HPT374 by 50 MHz DPLL
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R]
  • From: Bartlomiej Zolnierkiewicz
• Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
  • From: James Bottomley
• Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs) II
  • From: Alan Cox
• Re: [PATCH] pata_cmd64x: Set up MWDMA modes properly
  • From: Alan Cox
• Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs) II
  • From: Andi Kleen
• Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
  • From: Alan Cox
• Re: [PATCH] pata_cmd64x: Set up MWDMA modes properly
  • From: Mikael Pettersson
• Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
  • From: Andi Kleen
• Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
  • From: Alan Cox
• Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
  • From: James Bottomley
• Re: [PATCH] pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R]
  • From: Alan Cox
• Re: [PATCH 1/2] pata_hpt37x: actually clock HPT374 by 50 MHz DPLL
  • From: Alan Cox
• Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
  • From: Andi Kleen
• Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
  • From: Alan Cox
• Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
  • From: Alan Cox
• Re: Disk spin down issue on shut down/suspend to disk
  • From: Rafael J. Wysocki
• [patch 4/4] Enable Aggressive Link Power management for AHCI controllers.
  • From: Kristen Carlson Accardi
• [patch 3/4] Enable link power management for ata drivers
  • From: Kristen Carlson Accardi
• [patch 2/4] increase number of allowable device flags
  • From: Kristen Carlson Accardi
• [patch 1/4] Store interrupt value
  • From: Kristen Carlson Accardi
• [patch 0/4] Updated SATA Link Power Management patches
  • From: Kristen Carlson Accardi
• [PATCH] pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R]
  • From: Bartlomiej Zolnierkiewicz
• sata_promise: Warning/Errors with SATA300 TX4 and SAMSUNG HD501LJ
  • From: Sebastian Witt
• [PATCH] libata-core: support wildcard matching in ata_blacklist_entry
  • From: David Milburn
• Re: [PATCH 1/2] pata_hpt37x: actually clock HPT374 by 50 MHz DPLL
  • From: Bartlomiej Zolnierkiewicz
• Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
  • From: James Bottomley
• [PATCH 4/4] sis5513: remove /proc/ide/sis
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/4] sis5513: clear prefetch and postwrite for ATAPI devices
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/4] it8213/piix/slc90e66: "de-couple" PIO and UDMA modes
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/4] ide: fix hidden dependencies on CONFIG_IDE_GENERIC
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/11] it8213/piix/slc90e66: remove {it8213,piix,slc90e66}_dma_2_pio()
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6.22.2 review 06/84] Add a PCI ID for santa rosas PATA controller.
  • From: Andrew Morton
• Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
  • From: Andi Kleen
• Re: Disk spin down issue on shut down/suspend to disk
  • From: Rafael J. Wysocki
• Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
  • From: Alan Cox
• Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
  • From: Andi Kleen
• Re: pata error messages?
  • From: Kumar Gala
• Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
  • From: Alan Cox
• Re: pata error messages?
  • From: Alan Cox
• Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
  • From: Andi Kleen
• Re: [patch 2/4] Expose Power Management Policy option to users
  • From: Kristen Carlson Accardi
• pata error messages?
  • From: Kumar Gala
• Re: Disk spin down issue on shut down/suspend to disk
  • From: Thomas Renninger
• Re: Disk spin down issue on shut down/suspend to disk
  • From: Pavel Machek
• Re: Disk spin down issue on shut down/suspend to disk
  • From: Pavel Machek
• AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
  • From: Alan Cox
• Re: SATA open bugs
  • From: Matt Sealey
• Re: SATA open bugs
  • From: Jens Axboe
• Re: SATA open bugs
  • From: James Bottomley
• Re: SATA open bugs
  • From: Tejun Heo
• Re: SATA open bugs
  • From: Mark Lord
• Re: [PATCH] libata-core: support wildcard matching in ata_blacklist_entry
  • From: Alan Cox
• Re: [PATCH 3/11] au1xxx-ide: use ide_tune_dma()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
  • From: Bartlomiej Zolnierkiewicz
• SATA open bugs
  • From: Natalie Protasevich
• [PATCH] libata-core: support wildcard matching in ata_blacklist_entry
  • From: David Milburn
• Re: [patch 1/4] libata: check for AN support
  • From: Andrew Morton
• [patch 4/4] libata: send event when AN received
  • From: Kristen Carlson Accardi
• [patch 3/4] libata: expose AN to user space
  • From: Kristen Carlson Accardi
• [patch 2/4] scsi: expose AN support to user space
  • From: Kristen Carlson Accardi
• [patch 1/4] libata: check for AN support
  • From: Kristen Carlson Accardi
• [patch 0/4] Updated AN patches, now without gendisk
  • From: Kristen Carlson Accardi
• Re: [SOLVED] problems while mounting /boot partition
  • From: Brian J. Murrell
• Re: Disk spin down issue on shut down/suspend to disk
  • From: Mark Lord
• Re: [PATCH] libata: implement BROKEN_HPA horkage and apply it to HDS724040KLSA80
  • From: Luiz Fernando N. Capitulino
• Re: [PATCH] libata: implement BROKEN_HPA horkage and apply it to HDS724040KLSA80
  • From: Quel Qun
• Re: libata git tree, mbox queue status and contents
  • From: Jeff Garzik
• problems while mounting /boot partition
  • From: Michal Piotrowski