ATA_PIIX - soft resetting port, port is slow to respond, machine "freezes" for a few seconds

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I just upgraded from 2.6.18 distributed with Debian to 2.6.22.6.

I compiled ATA_PIIX directly in the kernel.

From time to time, the machine "freezes" for a couple of seconds, and I'm getting the following logs (pasted below).

I didn't have anything like that with the old IDE.

The machine runs a 2 GB Transcend IDE flash disk.

Any ideas what it might be?


ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd ca/00:10:47:64:1d/00:00:00:00:00/e0 tag 0 cdb 0x0 data 8192 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1: port is slow to respond, please be patient (Status 0xd0)
ata1: device not ready (errno=-16), forcing hardreset
ata1: soft resetting port
ata1.00: configured for MWDMA2
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd ca/00:10:47:64:1d/00:00:00:00:00/e0 tag 0 cdb 0x0 data 8192 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1: port is slow to respond, please be patient (Status 0xd0)
ata1: device not ready (errno=-16), forcing hardreset
ata1: soft resetting port
ata1.00: configured for MWDMA2
ata1: EH complete
ata1.00: limiting speed to MWDMA1:PIO4
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd ca/00:10:47:64:1d/00:00:00:00:00/e0 tag 0 cdb 0x0 data 8192 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1: port is slow to respond, please be patient (Status 0xd0)
ata1: device not ready (errno=-16), forcing hardreset
ata1: soft resetting port
ata1.00: configured for MWDMA1
ata1: EH complete
sd 0:0:0:0: [sda] 3985632 512-byte hardware sectors (2041 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 3985632 512-byte hardware sectors (2041 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA


--
Tomasz Chmielewski
http://wpkg.org
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux