Alan Cox schrieb:
in the sata_mv source. Should I add something like:
{ PCI_VDEVICE(TTI, 0x2300), chip_604x },
Yes
Just to not leave this thread hanging in the mail archives: this didn't
work for me. With the above patch, the controller is detected, but the
system hangs upon inclusion of the sata_mv driver. dmess shows:
[ 32.240000] sata_mv 0000:06:00.0: version 0.81
[ 32.272000] ACPI: PCI Interrupt 0000:06:00.0[A] -> Done.Link [APC6]
->GSI 16 (level, low) -> IRQ 17
[ 32.336000] sata_mv 0000:06:00.0: Applying B2 workarounds to unknown rev
[ 32.388000] sata_mv 0000:06:00.0: 32 slots 4 ports SCSI mode IRQ via INTx
[ 32.432000] sata_mv: PCI ERROR; PCI IRQ cause=0x00000000
[ 32.464000] sata_mv: PCI ERROR; PCI IRQ cause=0x00000000
[ 32.496000] sata_mv: PCI ERROR; PCI IRQ cause=0x00000000
[ 32.528000] sata_mv: PCI ERROR; PCI IRQ cause=0x00000000
[ 32.560000] sata_mv: PCI ERROR; PCI IRQ cause=0x00000000
[ 32.592000] sata_mv: PCI ERROR; PCI IRQ cause=0x00000000
and many many more PCI ERRORS until I reboot the system. So, I guess
that particular Highpoint controller does not work yet with sata_mv.
Thanks very much for your efforts, anyway.
Greetings, Karim.
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
