Should sata_mv work with Highpoint RocketRAID 2300?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello all,
sorry if this it too dumb a question, but since I haven't gotten any results with the sata_mv driver (kernel 2.6.22.2), I was wondering if the Highpoint RocketRaid 2300 controller - which features a Marvell chip - is even supposed to work with sata_mv.

lspci shows in regard to the controller card:

06:00.0 SCSI storage controller [0100]: Triones Technologies, Inc. Unknown device [1103:2300] (rev 02)
       Subsystem: Marvell Technology Group Ltd. Unknown device [11ab:11ab]
       Flags: bus master, fast devsel, latency 0, IRQ 11
       Memory at fd500000 (64-bit, non-prefetchable) [size=1M]
       I/O ports at 4800 [size=256]
       Capabilities: [40] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
       Capabilities: [60] Express Legacy Endpoint IRQ 0

Is this one of the cards the sata_mv driver should handle, or do I need to use another kernel module, or is that chip without linux support so far?

Thanks for any insight into the matter.

Greetings, Karim.
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux