Linux IDE Archive
[Prev Page][Next Page]
- Re: CompactFlash and HD unhappy together on the same IDE channel
- Re: sata_nv hotplug
- Re: [PATCH 2.6.23-rc3] pata_pdc2027x: PLL detection fixes
- [PATCH 2.6.23-rc3] pata_pdc2027x: PLL detection fixes
- Re: CompactFlash and HD unhappy together on the same IDE channel
- Re: [PATCH 1/8] alim15x3: PIO fallback fix
- sata_nv hotplug
- Re: [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/8] alim15x3: PIO fallback fix
- From: Bartlomiej Zolnierkiewicz
- [PATCH 6/7] ide: remove CONFIG_IDEDMA_ONLYDISK
- From: Bartlomiej Zolnierkiewicz
- [PATCH 3/7] ide: remove "idex=dma" kernel parameter
- From: Bartlomiej Zolnierkiewicz
- [PATCH 5/7] ide: add "hdx=nodma" kernel parameter
- From: Bartlomiej Zolnierkiewicz
- [PATCH 7/7] ide: add DECLARE_GENERIC_PCI_DEV() macro to generic IDE PCI host driver
- From: Bartlomiej Zolnierkiewicz
- [PATCH 4/7] ide: remove hwif->autodma and drive->autodma
- From: Bartlomiej Zolnierkiewicz
- [PATCH 2/7] ide: remove CONFIG_BLK_DEV_IDEDMA_FORCED
- From: Bartlomiej Zolnierkiewicz
- [PATCH 1/7] ide: use PCI_VDEVICE() macro
- From: Bartlomiej Zolnierkiewicz
- [PATCH] ide: fix PCI refcounting
- [PATCH 2/2] pdc202xx_new: switch to using pci_get_slot()
- [PATCH 1/2] pdc202xx_new: fix PCI refcounting
- File corruption in 2.6.18 thru 2.6.22
- Re: [PATCH 1/8] alim15x3: PIO fallback fix
- CompactFlash and HD unhappy together on the same IDE channel
- [PATCH libata-dev#upstream REGENERATED] libata: move EH repeat reporting into ata_eh_report()
- [PATCH libata-dev#upstream 3/3 REGENERATED] libata: implement and use ata_port_desc() to report port configuration
- Re: [PATCH 1/1] libata: pata_pdc2027x PLL input clock fix
- Re: [PATCH] advertise correct IDE mode on Pegasos2
- [PATCH] advertise correct IDE mode on Pegasos2
- Re: [PATCH] advertise correct IDE mode on Pegasos2
- Re: Resets on sil3124 & sil3726 PMP
- Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
- [RFC] Sandisk DOC H3 Linux driver
- PATA hotplug
- Re: [PATCH] [428/2many] MAINTAINERS - SERIAL ATA (SATA) SUBSYSTEM:
- Re: [PATCH] [428/2many] MAINTAINERS - SERIAL ATA (SATA) SUBSYSTEM:
- Re: [PATCH] pata_cmd64x: Set up MWDMA modes properly
- Re: [PATCH] pata_cmd64x: Set up MWDMA modes properly
- Re: [PATCH] advertise correct IDE mode on Pegasos2
- [PATCH] advertise correct IDE mode on Pegasos2
- Re: sata_sil, sil3512, and PMP?
- [PATCH #upstream-fixes] libata: don't check n_sectors during revalidation if zero
- Re: [PATCH take #5] [libata] libata driver for bf548 on chip ATAPI controller.
- Re: [PATCH] libata: kill sector_buf temporary buffer
- Re: [PATCH 1/1] libata: pata_pdc2027x PLL input clock fix
- Re: [PATCH 1/1] libata: pata_pdc2027x PLL input clock fix
- Re: [PATCH] libata-core: support wildcard matching in ata_blacklist_entry
- Re: [PATCH take #5] [libata] libata driver for bf548 on chip ATAPI controller.
- Re: sata_nv + ADMA + Samsung disk problem
- Re: [PATCH take #5] [libata] libata driver for bf548 on chip ATAPI controller.
- Re: [PATCH take #5] [libata] libata driver for bf548 on chip ATAPI controller.
- ICH7: proposition for supporting AHCI along with native IDE
- From: Jonathan Bastien-Filiatrault
- Re: adding Pegasus IDE quirk for pata_via
- Re: adding Pegasus IDE quirk for pata_via
- Re: [PATCH take #5] [libata] libata driver for bf548 on chip ATAPI controller.
- Re: sata_nv + ADMA + Samsung disk problem
- Re: sata drive loosing connection/resetting port
- Re: Enabling AHCI on ICH7 without BIOS support
- Re: Enabling AHCI on ICH7 without BIOS support
- From: Jonathan Bastien-Filiatrault
- Re: Bad CD disk disables IDE DMA
- Re: look at this log!!!
- Re: Enabling AHCI on ICH7 without BIOS support
- Re: booting from MD raid using libata
- Re: Bad CD disk disables IDE DMA
- Re: Bad CD disk disables IDE DMA
- Re: booting from MD raid using libata
- Re: Bad CD disk disables IDE DMA
- Re: Still having problems with sata_promise on all late kernels - shutdown too - BISECTED
- Re: Still having problems with sata_promise on all late kernels - shutdown too - BISECTED
- Re: [PATCHSET #upstream-fixes] libata: update HPA handling
- Re: booting from MD raid using libata
- Re: sata drive loosing connection/resetting port
- Re: [PATCH] libata: kill sector_buf temporary buffer
- Re: [PATCH] libata: kill sector_buf temporary buffer
- Re: Bad CD disk disables IDE DMA
- Re: [PATCHSET #upstream-fixes] libata: update HPA handling
- [PATCH] libata: kill sector_buf temporary buffer
- Re: Still having problems with sata_promise on all late kernels - shutdown too - BISECTED
- Re: [PATCH] hpt366: fix PCI clock detection for HPT374 (take 4)
- Re: [PATCH take #5] [libata] libata driver for bf548 on chip ATAPI controller.
- Re: [PATCH 3/4] libata: ACPI checks for 80wire cable
- Re: [PATCH 1/4] libata: ACPI checks for 80wire cable
- Re: Still having problems with sata_promise on all late kernels - shutdown too - BISECTED
- RE: sata_sil, sil3512, and PMP?
- RE: [patch 2/4] scsi: expose AN support to user space
- Re: regression problem with Maxtor disk
- AVIS AUX ETUDIANTS DESIRANTS DES BOURSES D?ETUDES
- From: intercible infos intercible infos
- Re: regression problem with Maxtor disk
- ST340823A disk size issue - Revisited
- RE: sata_sil, sil3512, and PMP?
- Re: [PATCH 2/4] libata: implement BROKEN_HPA horkage and apply to affected drives
- Re: [PATCH 2/4] libata: implement BROKEN_HPA horkage and apply to affected drives
- [PATCH 3/4] libata: clean up read/set native_max address functions
- [PATCH 2/4] libata: implement BROKEN_HPA horkage and apply to affected drives
- [PATCH 1/4] libata: move ata_id_n_sectors() upward
- [PATCHSET #upstream-fixes] libata: update HPA handling
- Re: [PATCH #upstream-fixes] libata: fix n_sectors failure handling during revalidation
- [PATCH #upstream-fixes] libata: fix n_sectors failure handling during revalidation
- Re: Early ATA devices
- Re: Early ATA devices
- Re: Still having problems with sata_promise on all late kernels
- Re: [patch 2/4] scsi: expose AN support to user space
- From: Kristen Carlson Accardi
- Re: [patch 1/4] libata: check for AN support
- From: Kristen Carlson Accardi
- Re: Still having problems with sata_promise on all late kernels - shutdown too - BISECTED
- Re: Still having problems with sata_promise on all late kernels
- Re: Resets on sil3124 & sil3726 PMP
- Re: [patch 2/4] scsi: expose AN support to user space
- Re: [PATCH] ST340823A, HPA and libata
- Re: sata drive loosing connection/resetting port
- sata_sil, sil3512, and PMP?
- booting from MD raid using libata
- Accessing CDROM drive in laptop SATA/PATA hardware config
- Re: [PATCH take #5] [libata] libata driver for bf548 on chip ATAPI controller.
- [git patches] libata fixes
- [PATCH take #5] [libata] libata driver for bf548 on chip ATAPI controller.
- Re: look at this log!!! - no
- Re: [PATCH libata-dev#upstream 2/2] libata: move EH repeat reporting into ata_eh_report()
- Re: [PATCH libata-dev#upstream 1/3] libata: use ata_port_printk() in ata_wait_idle()
- Re: [PATCH libata-dev#upstream 3/3] libata: implement and use ata_port_desc() to report port configuration
- Re: [PATCH 1/1] AVR32 PATA driver
- From: Kristoffer Nyborg Gregertsen
- Re: [patch 04/25] libata-add-irq_flags-to-struct-pata_platform_info-fix
- Re: [patch 25/25] ata_piix: disallow UDMA 133 on ICH5 & ICH7
- Re: [PATCH] ata_piix: add TECRA M7 to broken suspend list
- Re: [PATCH 1/2] pata_hpt37x: actually clock HPT374 with 50 MHz DPLL (take 2)
- Re: [PATCH] pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R]
- Re: [patch 1/4] Store interrupt value
- Re: [patch 2/4] scsi: expose AN support to user space
- Re: [patch 4/4] libata: send event when AN received
- Re: regression problem with Maxtor disk
- Re: [patch 1/4] libata: check for AN support
- Re: Still having problems with sata_promise on all late kernels
- Re: regression problem with Maxtor disk
- Re: Still having problems with sata_promise on all late kernels - shutdown too - BISECTED
- Re: [patch 24/25] pata_cmd64x: Set up MWDMA modes properly
- Re: [PATCH] libata: Note that our cache flush code needs fixing up
- Re: [PATCH] libata-core: Document some limits/assumptions about ID_ATA
- Re: [2.6.23-rc3] Regression: "spurious completions during NCQ"
- Re: [PATCH RE-UPDATED] libata: add support for ATA_16 on ATAPI
- Re: [2.6.23-rc3] Regression: "spurious completions during NCQ"
- Re: [PATCH 1/2] libata: move ata_altstatus() to pio data xfer functions
- Re: [PATCH] libata: Correct IORDY handling
- Re: [PATCH 01/14] libata-link: introduce ata_link
- Re: sata drive loosing connection/resetting port
- Re: Resets on sil3124 & sil3726 PMP
- Resets on sil3124 & sil3726 PMP
- Re: Should sata_mv work with Highpoint RocketRAID 2300?
- Re: regression problem with Maxtor disk
- [-mm patch] unexport ide_tune_dma
- [-mm patch] unexport ide_acpi_set_state
- [-mm patch] make drivers/ata/libata-scsi.c:ata_scsi_link_pm_policy() static
- Re: sata drive loosing connection/resetting port
- Re: Should sata_mv work with Highpoint RocketRAID 2300?
- From: Karim 'Kasi Mir' Senoucci
- look at this log!!!
- Re: Should sata_mv work with Highpoint RocketRAID 2300?
- Should sata_mv work with Highpoint RocketRAID 2300?
- From: Karim 'Kasi Mir' Senoucci
- Re: Still having problems with sata_promise on all late kernels - shutdown too - BISECTED
- Re: Still having problems with sata_promise on all late kernels
- Enabling AHCI on ICH7 without BIOS support
- From: Jonathan Bastien-Filiatrault
- Re: [patch 0/4] Updated AN patches, now without gendisk
- Re: sata_nv + ADMA + Samsung disk problem
- [PATCH] ata_piix: add TECRA M7 to broken suspend list
- Re: Still having problems with sata_promise on all late kernels
- Re: Still having problems with sata_promise on all late kernels
- Re: sata drive loosing connection/resetting port
- Re: Sil3124: IRQ loss errata on PCI-X
- Re: [2.6.23-rc3] Regression: "spurious completions during NCQ"
- Re: regression problem with Maxtor disk
- Re: sata_nv + ADMA + Samsung disk problem
- [patch 04/12] ata_piix: update map 10b for ich8m
- Re: [PATCH 1/1] AVR32 PATA driver
- From: Kristoffer Nyborg Gregertsen
- [PATCH 1/1] AVR32 PATA driver
- From: Kristoffer Nyborg Gregertsen
- DMA problem with HighPoint R100 and DVD drive
- [PATCH try 4] [libata] libata driver for bf548 on chip ATAPI controller.
- Re: Still having problems with sata_promise on all late kernels - shutdown too
- [PATCH try 3] [libata] libata driver for bf548 on chip ATAPI controller.
- Still having problems with sata_promise on all late kernels
- [PATCH again] [libata] libata driver for bf548 on chip ATAPI controller.
- Re: [PATCH] [428/2many] MAINTAINERS - SERIAL ATA (SATA) SUBSYSTEM:
- Re: sata drive loosing connection/resetting port
- Sil3124: IRQ loss errata on PCI-X
- [2.6.23-rc3] Regression: "spurious completions during NCQ"
- Re: [patch 3/4] Enable link power management for ata drivers
- From: Kristen Carlson Accardi
- Re: [patch 0/4] Updated AN patches, now without gendisk
- From: Kristen Carlson Accardi
- Problems with the sata_promise driver while using smart.
- From: Ole-Christian S. Hagenes
- Re: sata-via failure on 2.6.22 for via 6421 chipset (Was: Libata PATA status)
- Re: [PATCH] pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R]
- Re: libata git tree, mbox queue status and contents
- Re: [PATCH] [libata] libata driver for bf548 on chip ATAPI controller.
- Re: [PATCH] [241/2many] MAINTAINERS - IDE/ATAPI CDROM DRIVER
- Re: [PATCH] [428/2many] MAINTAINERS - SERIAL ATA (SATA) SUBSYSTEM:
- [PATCH] [libata] libata driver for bf548 on chip ATAPI controller.
- Re: FW: Libata
- RE: Libata
- FW: Libata
- [PATCH] [428/2many] MAINTAINERS - SERIAL ATA (SATA) SUBSYSTEM:
- [PATCH] [390/2many] MAINTAINERS - PROMISE SATA TX2/TX4 CONTROLLER LIBATA DRIVER
- [PATCH] [241/2many] MAINTAINERS - IDE/ATAPI CDROM DRIVER
- [PATCH] [240/2many] MAINTAINERS - IDE SUBSYSTEM
- Re: regression problem with Maxtor disk
- regression problem with Maxtor disk
- Re: pata_ali exceptions (timeout)
- Re: [PATCH] pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R]
- Re: [PATCH] pata_cmd64x: Set up MWDMA modes properly
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] pata_cmd64x: Set up MWDMA modes properly
- Re: [PATCH] pata_cmd64x: Set up MWDMA modes properly
- [PATCH] hpt366: fix PCI clock detection for HPT374 (take 4)
- Re: [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
- Re: [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
- Re: [PATCH 3/11] au1xxx-ide: use ide_tune_dma()
- Re: [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
- Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
- Re: [PATCH 3/11] au1xxx-ide: use ide_tune_dma()
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 3/11] au1xxx-ide: use ide_tune_dma()
- Re: [PATCH 3/11] au1xxx-ide: use ide_tune_dma()
- Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
- Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
- Re: [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
- Re: [patch 0/4] Updated AN patches, now without gendisk
- Re: pata_ali exceptions (timeout)
- pata_ali exceptions (timeout)
- Re: [patch 3/4] Enable link power management for ata drivers
- Re: Disk spin down issue on shut down/suspend to disk
- Re: [PATCH 3/11] au1xxx-ide: use ide_tune_dma()
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
- From: Bartlomiej Zolnierkiewicz
- [patch 17/25] libata: correct IORDY handling
- [patch 24/25] pata_cmd64x: Set up MWDMA modes properly
- [patch 13/25] libata: ACPI checks for 80wire cable: implementation
- [patch 18/25] libata: add human-readable error value decoding
- [patch 14/25] libata: ACPI checks for 80wire cable: use in pata_amd
- [patch 25/25] ata_piix: disallow UDMA 133 on ICH5 & ICH7
- [patch 11/25] ALPM: enable Aggressive Link Power management for AHCI controllers.
- [patch 23/25] ST340823A, HPA and libata
- [patch 10/25] ALPM: enable link power management for ata drivers
- [patch 20/25] scsi: expose AN support to user space
- [patch 15/25] libata: ACPI checks for 80wire cable: use in pata_via
- [patch 12/25] libata: ACPI checks for 80wire cable: headers
- [patch 19/25] libata: check for AN support
- [patch 22/25] libata: send event when AN received
- [patch 21/25] libata: expose AN to user space
- [patch 16/25] Fix libata warnings with CONFIG_PM=n
- [patch 07/25] libata: adjust libata to ignore errors after spinup
- [patch 08/25] ALPM: store interrupt value
- [patch 06/25] sata_nv: allow changing queue depth
- [patch 09/25] ALPM: increase number of allowable device flags
- [patch 01/25] pata_acpi: restore driver
- [patch 02/25] pata_acpi: rework the ACPI drivers based upon experience of what the BIOS can do
- [patch 04/25] libata-add-irq_flags-to-struct-pata_platform_info-fix
- [patch 05/25] ata: add the SW NCQ support to sata_nv for MCP51/MCP55/MCP61
- [patch 03/25] libata: implement ata_wait_after_reset()
- Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs) II
- Re: [PATCH 3/11] au1xxx-ide: use ide_tune_dma()
- Re: [PATCH 2/11] it8213/piix/slc90e66: remove {it8213,piix,slc90e66}_dma_2_pio()
- [PATCH] hpt366: fix PCI clock detection for HPT374 (take 3)
- Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs) II
- [PATCH] hpt366: fix PCI clock detection for HPT374
- Re: [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
- Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
- Re: [PATCH] pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R]
- Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
- Re: [PATCH 2/4] it8213/piix/slc90e66: "de-couple" PIO and UDMA modes
- [PATCH 2/2] pata_hpt{37x|3x2n}: fix clock reporting (take 2)
- [PATCH 1/2] pata_hpt37x: actually clock HPT374 with 50 MHz DPLL (take 2)
- Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs) II
- Re: [PATCH 2/11] it8213/piix/slc90e66: remove {it8213,piix,slc90e66}_dma_2_pio()
- Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
- Re: [PATCH 1/2] pata_hpt37x: actually clock HPT374 by 50 MHz DPLL
- Re: [PATCH 1/2] pata_hpt37x: actually clock HPT374 by 50 MHz DPLL
- Re: [PATCH 1/2] pata_hpt37x: actually clock HPT374 by 50 MHz DPLL
- Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs) II
- Re: [PATCH] pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R]
- Re: [PATCH] pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R]
- Re: [PATCH] pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R]
- Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs) II
- Re: [PATCH 1/2] pata_hpt37x: actually clock HPT374 by 50 MHz DPLL
- Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs) II
- Re: problems while mounting /boot partition
- Re: [PATCH 1/2] pata_hpt37x: actually clock HPT374 by 50 MHz DPLL
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R]
- From: Bartlomiej Zolnierkiewicz
- Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
- Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs) II
- Re: [PATCH] pata_cmd64x: Set up MWDMA modes properly
- Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs) II
- Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
- Re: [PATCH] pata_cmd64x: Set up MWDMA modes properly
- Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
- Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
- Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
- Re: [PATCH] pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R]
- Re: [PATCH 1/2] pata_hpt37x: actually clock HPT374 by 50 MHz DPLL
- Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
- Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
- Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
- Re: Disk spin down issue on shut down/suspend to disk
- [patch 4/4] Enable Aggressive Link Power management for AHCI controllers.
- From: Kristen Carlson Accardi
- [patch 3/4] Enable link power management for ata drivers
- From: Kristen Carlson Accardi
- [patch 2/4] increase number of allowable device flags
- From: Kristen Carlson Accardi
- [patch 1/4] Store interrupt value
- From: Kristen Carlson Accardi
- [patch 0/4] Updated SATA Link Power Management patches
- From: Kristen Carlson Accardi
- [PATCH] pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R]
- From: Bartlomiej Zolnierkiewicz
- sata_promise: Warning/Errors with SATA300 TX4 and SAMSUNG HD501LJ
- [PATCH] libata-core: support wildcard matching in ata_blacklist_entry
- Re: [PATCH 1/2] pata_hpt37x: actually clock HPT374 by 50 MHz DPLL
- From: Bartlomiej Zolnierkiewicz
- Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
- [PATCH 4/4] sis5513: remove /proc/ide/sis
- From: Bartlomiej Zolnierkiewicz
- [PATCH 3/4] sis5513: clear prefetch and postwrite for ATAPI devices
- From: Bartlomiej Zolnierkiewicz
- [PATCH 2/4] it8213/piix/slc90e66: "de-couple" PIO and UDMA modes
- From: Bartlomiej Zolnierkiewicz
- [PATCH 1/4] ide: fix hidden dependencies on CONFIG_IDE_GENERIC
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 2/11] it8213/piix/slc90e66: remove {it8213,piix,slc90e66}_dma_2_pio()
- From: Bartlomiej Zolnierkiewicz
- Re: [2.6.22.2 review 06/84] Add a PCI ID for santa rosas PATA controller.
- Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
- Re: Disk spin down issue on shut down/suspend to disk
- Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
- Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
- Re: pata error messages?
- Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
- Re: pata error messages?
- Re: AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
- Re: [patch 2/4] Expose Power Management Policy option to users
- From: Kristen Carlson Accardi
- pata error messages?
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- AMD64 dma_alloc_coherent crashes on non PCI device (was SATA open bugs)
- Re: SATA open bugs
- Re: SATA open bugs
- Re: SATA open bugs
- Re: SATA open bugs
- Re: SATA open bugs
- Re: [PATCH] libata-core: support wildcard matching in ata_blacklist_entry
- Re: [PATCH 3/11] au1xxx-ide: use ide_tune_dma()
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
- From: Bartlomiej Zolnierkiewicz
- SATA open bugs
- From: Natalie Protasevich
- [PATCH] libata-core: support wildcard matching in ata_blacklist_entry
- Re: [patch 1/4] libata: check for AN support
- [patch 4/4] libata: send event when AN received
- From: Kristen Carlson Accardi
- [patch 3/4] libata: expose AN to user space
- From: Kristen Carlson Accardi
- [patch 2/4] scsi: expose AN support to user space
- From: Kristen Carlson Accardi
- [patch 1/4] libata: check for AN support
- From: Kristen Carlson Accardi
- [patch 0/4] Updated AN patches, now without gendisk
- From: Kristen Carlson Accardi
- Re: [SOLVED] problems while mounting /boot partition
- Re: Disk spin down issue on shut down/suspend to disk
- Re: [PATCH] libata: implement BROKEN_HPA horkage and apply it to HDS724040KLSA80
- From: Luiz Fernando N. Capitulino
- Re: [PATCH] libata: implement BROKEN_HPA horkage and apply it to HDS724040KLSA80
- Re: libata git tree, mbox queue status and contents
- problems while mounting /boot partition
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- Re: [PATCH 1/1] AVR32 PATA driver
- From: Kristoffer Nyborg Gregertsen
- Re: libata git tree, mbox queue status and contents
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- Re: [PATCH] libata: implement BROKEN_HPA horkage and apply it to HDS724040KLSA80
- [PATCH] libata: First cut at verifying and validating all the id checks.
- [PATCH] pata_cmd64x: Set up MWDMA modes properly
- Re: [PATCH] libata: implement BROKEN_HPA horkage and apply it to HDS724040KLSA80
- From: Luiz Fernando N. Capitulino
- [PATCH] libata: Note that our cache flush code needs fixing up
- [PATCH] libata-core: Allow translation setting to fail
- [PATCH] libata-core: Document some limits/assumptions about ID_ATA
- [PATCH] ST340823A, HPA and libata
- Re: Disk spin down issue on shut down/suspend to disk
- sata_nv + ADMA + Samsung disk problem
- Re: Disk spin down issue on shut down/suspend to disk
- Re: libata-core.c: ata_fill_sg() ... SATA AHCI
- Re: libata-core.c: ata_fill_sg() ... SATA AHCI
- Re: libata-core.c: ata_fill_sg() ... sanity check on arithmentic ?
- Re: libata-core.c: ata_fill_sg() ... sanity check on arithmentic ?
- Re: libata-core.c: ata_fill_sg() ... sanity check on arithmentic ?
- Re: Disk spin down issue on shut down/suspend to disk
- Re: [PATCH] libata: implement BROKEN_HPA horkage and apply it to HDS724040KLSA80
- Re: libata-core.c: ata_fill_sg() ... sanity check on arithmentic ?
- Re: [PATCH 2/2 #upstream] libata: assume ATA_DEV_ATA on diagnostic failure
- [PATCH 2/2 #upstream] libata: assume ATA_DEV_ATA on diagnostic failure
- [PATCH 1/2 #upstream] libata: udpate ata_dev_try_classify() arguments
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- From: Henrique de Moraes Holschuh
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- Re: [PATCH] libata: implement BROKEN_HPA horkage and apply it to HDS724040KLSA80
- Re: [PATCH 1/2] pata_hpt37x: actually clock HPT374 by 50 MHz DPLL
- Re: pata_ali: trouble with DVD combo
- Re: [PATCH 1/2] pata_hpt37x: actually clock HPT374 by 50 MHz DPLL
- Re: pata_ali: trouble with DVD combo
- Re: [PATCH 1/2] pata_hpt37x: actually clock HPT374 by 50 MHz DPLL
- [git patches] libata fixes
- pata_ali: trouble with DVD combo
- Re: [PATCH] ata_piix: update map 10b for ich8m
- Re: [PATCH 1/2] pata_hpt37x: actually clock HPT374 by 50 MHz DPLL
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- Re: [2.6.22.2 review 06/84] Add a PCI ID for santa rosas PATA controller.
- Re: Disk spin down issue on shut down/suspend to disk
- Re: [PATCH] libata: implement BROKEN_HPA horkage and apply it to HDS724040KLSA80
- Re: Disk spin down issue on shut down/suspend to disk
- [2.6.22.2 review 67/84] libata: add FUJITSU MHV2080BH to NCQ blacklist
- [2.6.22.2 review 06/84] Add a PCI ID for santa rosas PATA controller.
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- Re: [PATCH] libata: implement BROKEN_HPA horkage and apply it to HDS724040KLSA80
- Re: Disk spin down issue on shut down/suspend to disk
- Re: [PATCH] libata: implement BROKEN_HPA horkage and apply it to HDS724040KLSA80
- Re: No equivalent for ide-scsi available with the new PATA drivers?
- Re: [PATCH 1/1] AVR32 PATA driver
- From: Kristoffer Nyborg Gregertsen
- Re: [PATCH 0/1] AVR32 PATA driver
- From: Kristoffer Nyborg Gregertsen
- Re: [PATCH 1/1] AVR32 PATA driver
- Re: [PATCH 1/1] AVR32 PATA driver
- From: Kristoffer Nyborg Gregertsen
- Re: libata-core.c: ata_fill_sg() ... sanity check on arithmentic ?
- Re: [PATCH] libata: implement BROKEN_HPA horkage and apply it to HDS724040KLSA80
- Re: [PATCH] libata: implement BROKEN_HPA horkage and apply it to HDS724040KLSA80
- Re: [PATCH] libata: implement BROKEN_HPA horkage and apply it to HDS724040KLSA80
- Re: [PATCH] libata: implement BROKEN_HPA horkage and apply it to HDS724040KLSA80
- Re: [PATCH] libata: implement BROKEN_HPA horkage and apply it to HDS724040KLSA80
- [PATCH RE-UPDATED] libata: add support for ATA_16 on ATAPI
- Re: [PATCH 0/1] AVR32 PATA driver
- Re: [PATCH 1/1] AVR32 PATA driver
- Re: [PATCH] libata: implement BROKEN_HPA horkage and apply it to HDS724040KLSA80
- libata-core.c: ata_fill_sg() ... sanity check on arithmentic ?
- Re: [PATCH] libata: implement BROKEN_HPA horkage and apply it to HDS724040KLSA80
- Re: [PATCH] libata: implement BROKEN_HPA horkage and apply it to HDS724040KLSA80
- Re: [PATCH] libata: implement BROKEN_HPA horkage and apply it to HDS724040KLSA80
- From: Luiz Fernando N. Capitulino
- Re: [PATCH] libata: implement BROKEN_HPA horkage and apply it to HDS724040KLSA80
- Re: [PATCH] libata: implement BROKEN_HPA horkage and apply it to HDS724040KLSA80
- From: Luiz Fernando N. Capitulino
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- From: Henrique de Moraes Holschuh
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- From: Henrique de Moraes Holschuh
- Re: Disk spin down issue on shut down/suspend to disk
- From: Henrique de Moraes Holschuh
- 答复: Disk spin down issue on shut down/suspend to disk
- Re: [PATCH 11/11] ide: remove ->ide_dma_check
- From: Bartlomiej Zolnierkiewicz
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- [PATCH 1/1] AVR32 PATA driver
- From: Kristoffer Nyborg Gregertsen
- [PATCH 0/1] AVR32 PATA driver
- From: Kristoffer Nyborg Gregertsen
- Re: Disk spin down issue on shut down/suspend to disk
- Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
- Re: [stable] [PATCH] ata_piix: update map 10b for ich8m
- Re: [stable] [PATCH] ata_piix: update map 10b for ich8m
- Re: [stable] [PATCH] ata_piix: update map 10b for ich8m
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- [PATCH] libata: implement BROKEN_HPA horkage and apply it to HDS724040KLSA80
- Re: Disk spin down issue on shut down/suspend to disk
- From: Henrique de Moraes Holschuh
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- Re: [PATCH] mark PCI resource with start 0 as unassigned
- From: Benjamin Herrenschmidt
- Re: Boot fails on Intel SATA controller
- From: Luiz Fernando N. Capitulino
- Re: [PATCH] mark PCI resource with start 0 as unassigned
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
- Re: Boot fails on Intel SATA controller
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- Re: [PATCH] ide-cris: always tune PIO
- Re: [PATCH 3/11] au1xxx-ide: use ide_tune_dma()
- Re: [PATCH] mark PCI resource with start 0 as unassigned
- Re: [PATCH] ata_piix: update map 10b for ich8m
- From: Kristen Carlson Accardi
- [PATCH] ata_piix: update map 10b for ich8m
- Re: [PATCH] ide: move ide_config_drive_speed() calls to upper layers
- Re: ICH8 CF timeout (regression)...
- Re: ICH8 CF timeout (regression)...
- From: Kristen Carlson Accardi
- Re: [PATCH 2/2] [POWERPC] MPC8349E-mITX: use platform IDE driver for CF interface
- Re: [PATCH 1/2] [IDE] Platform IDE driver
- Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
- Re: [PATCH 1/2] pata_hpt37x: actually clock HPT374 by 50 MHz DPLL
- Re: [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
- Re: Disk spin down issue on shut down/suspend to disk
- Re: [PATCH 1/2] pata_hpt37x: actually clock HPT374 by 50 MHz DPLL
- Re: [PATCH 9/10] ide-cris: add PIO autotune fallback to ->ide_dma_check
- Re: [PATCH 10/11] ide-pmac: add PIO autotune fallback to ->ide_dma_check
- Re: [PATCH] sc1200: always tune PIO
- Re: [PATCH] ide: add cable detection for early UDMA66 devices (take 2)
- Re: [PATCH 3/3] aec62xx: always tune PIO
- Re: [PATCH 6/11] ide: remove ide_use_fast_pio()
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- Re: [PATCH 11/11] ide: remove ->ide_dma_check
- Re: Disk spin down issue on shut down/suspend to disk
- From: Henrique de Moraes Holschuh
- Re: [PATCH] fix IDE legacy mode resource
- Re: [PATCH 1/11] atiixp: DMA setup fixes
- Re: Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- From: Henrique de Moraes Holschuh
- Re: Disk spin down issue on shut down/suspend to disk
- Re: ASUS P5W motherboard PMP
- [PATCH 05/14] libata-link: linkify reset
- [PATCH 14/14] libata-link: update Power Management to handle PMP links
- [PATCH 13/14] libata-link: update hotplug to handle PMP links
- [PATCH 12/14] libata-link: update EH to deal with PMP links
- [PATCH 10/14] libata-link: add PMP links
- [PATCH 11/14] libata-link: update ata_scsi_error() to handle PMP links
- [PATCH 09/14] libata-link: implement ata_link_abort()
- [PATCH 06/14] libata-link: linkify config/EH related functions
- [PATCH 01/14] libata-link: introduce ata_link
- [PATCH 07/14] libata-link: make two port flags HRST_TO_RESUME and SKIP_D2H_BSY link flags
- [PATCH 08/14] libata-link: separate out link initialization functions
- [PATCH 04/14] libata-link: linkify EH action helpers
- [PATCH 03/14] libata-link: linkify PHY-related functions
- [PATCH 02/14] libata-link: implement and use link/device iterators
- [PATCHSET 2/4] libata: implement ata_link, take 7
- Re: 2.6.23-rc2 regression: check_irq_resend() warning from cmd64x
- From: Bartlomiej Zolnierkiewicz
- Re: 2.6.23-rc2: check_irq_resend on resume (ali15x3)
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCHSET] libata: implement ata_link, take 6
- Re: Disk spin down issue on shut down/suspend to disk
- Disk spin down issue on shut down/suspend to disk
- Re: Disk spin down issue on shut down/suspend to disk
- 2.6.23-rc2 regression: check_irq_resend() warning from cmd64x
- Re: [PATCH 5/11] ide: remove drive->init_speed zeroing
- [PATCH 2/2] hpt366: UltraDMA filtering for SATA cards
- [PATCH 1/2] hpt366: fix PCI clock detection for HPT374
- Re: [PATCH] ST340823A, HPA and libata
- Re: [PATCH 1/2] pata_hpt37x: actually clock HPT374 by 50 MHz DPLL
- [PATCH 1/2] pata_hpt37x: actually clock HPT374 by 50 MHz DPLL
- [PATCH] ST340823A, HPA and libata
- [PATCH 2/2] pata_hpt{37x|3x2n}: fix clock reporting
- Re: hpt374 sata (Highpoint Rocket 1540)
- Re: [PATCH 2/11] it8213/piix/slc90e66: remove {it8213,piix,slc90e66}_dma_2_pio()
- Re: libata git tree, mbox queue status and contents
- Re: [PATCH] ide: move ide_config_drive_speed() calls to upper layers
- Re: SiS driver K2.4 for 180/182/965/966....
- [PATCH 9/10] ide-cris: add PIO autotune fallback to ->ide_dma_check
- From: Bartlomiej Zolnierkiewicz
- [PATCH 11/11] ide: remove ->ide_dma_check
- From: Bartlomiej Zolnierkiewicz
- [PATCH 8/11] sl82c105: add PIO autotune fallback to ->ide_dma_check
- From: Bartlomiej Zolnierkiewicz
- [PATCH 10/11] ide-pmac: add PIO autotune fallback to ->ide_dma_check
- From: Bartlomiej Zolnierkiewicz
- [PATCH 7/11] cs5530/sc1200: add PIO autotune fallback to ->ide_dma_check
- From: Bartlomiej Zolnierkiewicz
- [PATCH 6/11] ide: remove ide_use_fast_pio()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 5/11] ide: remove drive->init_speed zeroing
- From: Bartlomiej Zolnierkiewicz
- [PATCH 4/11] hpt34x: fix CONFIG_HPT34X_AUTODMA=n handling
- From: Bartlomiej Zolnierkiewicz
- [PATCH 2/11] it8213/piix/slc90e66: remove {it8213,piix,slc90e66}_dma_2_pio()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 3/11] au1xxx-ide: use ide_tune_dma()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 1/11] atiixp: DMA setup fixes
- From: Bartlomiej Zolnierkiewicz
- [PATCH] ide-pmac: use ide_tune_dma() (take 2)
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] hook ACPI _PSx method to IDE power on/off
- From: Bartlomiej Zolnierkiewicz
- Re: ASUS P5W motherboard PMP
- 2.6.23-rc2: check_irq_resend on resume (ali15x3)
- Re: [PATCHSET] libata: implement ata_link, take 6
- Re: 2.6.23-rc1: pata_via cable detection differs from via82cxxx
- Marvell 6141 - Am I too early?
- Re: ASUS P5W motherboard PMP
- [PATCH 13/14] libata-link: update hotplug to handle PMP links
- [PATCH 12/14] libata-link: update EH to deal with PMP links
- [PATCH 10/14] libata-link: add PMP links
- [PATCH 09/14] libata-link: implement ata_link_abort()
- [PATCH 14/14] libata-link: update Power Management to handle PMP links
- [PATCH 11/14] libata-link: update ata_scsi_error() to handle PMP links
- [PATCH 06/14] libata-link: linkify config/EH related functions
- [PATCH 05/14] libata-link: linkify reset
- [PATCH 07/14] libata-link: make two port flags HRST_TO_RESUME and SKIP_D2H_BSY link flags
- [PATCH 03/14] libata-link: linkify PHY-related functions
- [PATCH 08/14] libata-link: separate out link initialization functions
- [PATCH 02/14] libata-link: implement and use link/device iterators
- [PATCH 01/14] libata-link: introduce ata_link
- [PATCH 04/14] libata-link: linkify EH action helpers
- [PATCHSET] libata: implement ata_link, take 6
- Re: libata git tree, mbox queue status and contents
- Re: [PATCH] hook ACPI _PSx method to IDE power on/off
- Re: Boot fails on Intel SATA controller
- Re: ASUS P5W motherboard PMP
- Re: ICH8 CF timeout (regression)...
- Re: [PATCH -mm] libata: add human-readable error value decoding v3
- Re: 2.6.23-rc1: pata_via cable detection differs from via82cxxx
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] ide: move ide_config_drive_speed() calls to upper layers
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] ide: move ide_config_drive_speed() calls to upper layers
- From: Bartlomiej Zolnierkiewicz
- Re: ICH8 CF timeout (regression)...
- Re: 2.6.23-rc1: pata_via cable detection differs from via82cxxx
- Re: [PATCH -mm] libata: add human-readable error value decoding v3
- 2.6.23-rc1: pata_via cable detection differs from via82cxxx
- Re: [PATCH] slc90e66: always tune PIO
- [PATCH -mm] libata: add human-readable error value decoding v3
- Re: libata git tree, mbox queue status and contents
- libata git tree, mbox queue status and contents
- Re: [PATCH] sata_qstor, pdc_adma, sata_sx4: convert to new EH
- Re: [PATCH] sata_qstor, pdc_adma, sata_sx4: convert to new EH
- Re: Boot fails on Intel SATA controller
- Re: ICH8 CF timeout (regression)...
- Re: ICH8 CF timeout (regression)...
- RE: [PATCH] ide-cris: always tune PIO
- Re: [PATCH] hook ACPI _PSx method to IDE power on/off
- Re: [PATCH] cs5530: always tune PIO
- Re: ST340823A disk size issue
- From: Bartlomiej Zolnierkiewicz
- Re: ST340823A disk size issue
- [PATCH] sc1200: always tune PIO
- From: Bartlomiej Zolnierkiewicz
- [PATCH] cs5530: always tune PIO
- From: Bartlomiej Zolnierkiewicz
- [PATCH] slc90e66: always tune PIO
- From: Bartlomiej Zolnierkiewicz
- [PATCH] ide-cris: always tune PIO
- From: Bartlomiej Zolnierkiewicz
- Re: ST340823A disk size issue
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] ide: add cable detection for early UDMA66 devices (take 2)
- From: Bartlomiej Zolnierkiewicz
- Re: ICH8 CF timeout (regression)...
- Re: ICH8 CF timeout (regression)...
- Re: Early ATA devices
- Re: ST340823A disk size issue
- Re: ST340823A disk size issue
- Re: [PATCH 2/3] sis5513: always tune PIO
- Re: Libata Sil3124 hybrid drive failure
- Re: [PATCH] block: add protocol discriminators to requests and queues
- [PATCH] Optional libata LED trigger for PowerMac G5
- Re: [PATCH] block: add protocol discriminators to requests and queues
- Libata Sil3124 hybrid drive failure
- [PATCH] block: add protocol discriminators to requests and queues
- Re: ICH8 CF timeout (regression)...
- Re: Boot fails on Intel SATA controller
- Re: [PATCH 1/3] sis5513: DMA setup fixes
- Re: hpt374 sata (Highpoint Rocket 1540)
- Re: [PATCH] hook ACPI _PSx method to IDE power on/off
- Re: ST340823A disk size issue
- Re: [PATCH] sata_qstor, pdc_adma, sata_sx4: convert to new EH
- Re: hpt374 sata (Highpoint Rocket 1540)
- Re: ST340823A disk size issue
- Re: ST340823A disk size issue
- Re: ST340823A disk size issue
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] sata_qstor, pdc_adma, sata_sx4: convert to new EH
- Re: No equivalent for ide-scsi available with the new PATA drivers?
- Re: ST340823A disk size issue
- Re: [PATCH UPDATED] libata: add support for ATA_16 on ATAPI
- Re: [PATCH] pata_isapnp: use MODULE_DEVICE_TABLE()
- Re: ST340823A disk size issue
- [PATCH] pata_isapnp: use MODULE_DEVICE_TABLE()
- ICH8 CF timeout (regression)...
- SiS driver K2.4 for 180/182/965/966....
- [PATCH] Add a PCI ID for santa rosa's PATA controller.
- [PATCH] hook ACPI _PSx method to IDE power on/off
- Re: [patch 3/4] Enable link power management for ata drivers
- Re: ST340823A disk size issue
- From: Bartlomiej Zolnierkiewicz
- Re: ST340823A disk size issue
- From: Bartlomiej Zolnierkiewicz
- Re: hpt374 sata (Highpoint Rocket 1540)
- Re: hpt374 sata (Highpoint Rocket 1540)
- Re: ST340823A disk size issue
- Re: ST340823A disk size issue
- From: Bartlomiej Zolnierkiewicz
- Re: ST340823A disk size issue
- [git patches] IDE fixes
- From: Bartlomiej Zolnierkiewicz
- Re: ST340823A disk size issue
- [patch 3/3] Enable Aggressive Link Power management for AHCI controllers.
- From: Kristen Carlson Accardi
- [patch 2/3] Enable link power management for ata drivers
- From: Kristen Carlson Accardi
- [patch 1/3] Store interrupt value
- From: Kristen Carlson Accardi
- [patch 0/3] Updated ALPM patches
- From: Kristen Carlson Accardi
- Re: hpt374 sata (Highpoint Rocket 1540)
- From: Bartlomiej Zolnierkiewicz
- Re: Marvell 7042 (sata_mv) fails to initialize drive
- Re: [patch 1/4] Store interrupt value
- From: Kristen Carlson Accardi
- Re: [patch 2/4] Expose Power Management Policy option to users
- From: Kristen Carlson Accardi
- Re: [PATCH 12/12] hpt366: always tune PIO
- Re: [patch 3/4] Enable link power management for ata drivers
- From: Kristen Carlson Accardi
- Re: hpt374 sata (Highpoint Rocket 1540)
- Re: [patch 2/4] Expose Power Management Policy option to users
- From: Kristen Carlson Accardi
- Re: hpt374 sata (Highpoint Rocket 1540)
- From: Bartlomiej Zolnierkiewicz
- Re: hpt374 sata (Highpoint Rocket 1540)
- Re: hpt374 sata (Highpoint Rocket 1540)
- Re: [PATCH] fix runtogether printk's in cmd64x IDE driver
- From: Bartlomiej Zolnierkiewicz
- [PATCH 2/3] sis5513: always tune PIO
- From: Bartlomiej Zolnierkiewicz
- [PATCH 3/3] aec62xx: always tune PIO
- From: Bartlomiej Zolnierkiewicz
- [PATCH 1/3] sis5513: DMA setup fixes
- From: Bartlomiej Zolnierkiewicz
[Index of Archives]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]