Hello, I think that I've found and fixed the problem. There is a copy/paste bug in vt6421_set_dma_mode() function which causes wrong values to be written to PATA_UDMA_TIMING register. This patch fixes a copy/paste bug that breaks DMA modes on VT6421 PATA port. Signed-off-by: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx> --- linux-2.6.22.3-orig/drivers/ata/sata_via.c 2007-09-01 00:40:22.000000000 +0200 +++ linux-2.6.22.3-router2/drivers/ata/sata_via.c 2007-09-01 00:10:40.000000000 +0200 @@ -370,7 +370,7 @@ { struct pci_dev *pdev = to_pci_dev(ap->host->dev); static const u8 udma_bits[] = { 0xEE, 0xE8, 0xE6, 0xE4, 0xE2, 0xE1, 0xE0, 0xE0 }; - pci_write_config_byte(pdev, PATA_UDMA_TIMING, udma_bits[adev->pio_mode - XFER_UDMA_0]); + pci_write_config_byte(pdev, PATA_UDMA_TIMING, udma_bits[adev->dma_mode - XFER_UDMA_0]); } static const unsigned int svia_bar_sizes[] = { -- Ondrej Zary - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html