[no subject]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear Tejun, I am not very good at linux and just enough to get by. I
have tried to use your patch by issuing the command 'patch -p1 <
combined.patch' and I receive this

msvlsi63:~/libata-tj-2.6.18.1-20061020 # patch -p1 < combined.patch
can't find file to patch at input line 5
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|Index: work/drivers/scsi/Kconfig
|===================================================================
|--- work.orig/drivers/scsi/Kconfig     2006-10-20 10:48:25.000000000 +0900
|+++ work/drivers/scsi/Kconfig  2006-10-20 10:48:35.000000000 +0900
--------------------------
File to patch:

Then, I opened combined.path and look for line 5

 source "drivers/scsi/megaraid/Kconfig.megaraid"

which point out the file I don't have. Am I missing something? I have
Opensuse 10.2 and Norco DS-1220 disk array which has Silicon Image
3726 port multiplier.

I don't have any driver install but Suse has recognized the PCI card
with Silicon Image 3124.

Thanks!

--------------------------------------------------------------
Chia-Ming Liu, Ph.D.
Mixed Signal VLSI Design Group
Advanced Technology Research Center 235
Oklahoma State University

Website: http://cottonmouth.ecen.okstate.edu
US Mail: 202 Engineering South Stillwater, OK 74078
Phone: 405-744-6241, 405-744-4580
Fax: 405-744-9198
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux