Maximum supported UDMA mode for AEC6280[R] is UDMA5 (not UDMA4)
and for AEC6880[R] it is UDMA6 (not UDMA5):
* Fix the problem by adding missing struct ata_port_info to artop_init_one().
* Use the right naming (s/626/628/).
* Bump driver version.
Fixes IDE->libata regression, problem was never present in IDE aec62xx driver.
Cc: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
drivers/ata/pata_artop.c | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
Index: b/drivers/ata/pata_artop.c
===================================================================
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -2,6 +2,7 @@
* pata_artop.c - ARTOP ATA controller driver
*
* (C) 2006 Red Hat <alan@xxxxxxxxxx>
+ * (C) 2007 Bartlomiej Zolnierkiewicz
*
* Based in part on drivers/ide/pci/aec62xx.c
* Copyright (C) 1999-2002 Andre Hedrick <andre@xxxxxxxxxxxxx>
@@ -28,7 +29,7 @@
#include <linux/ata.h>
#define DRV_NAME "pata_artop"
-#define DRV_VERSION "0.4.3"
+#define DRV_VERSION "0.4.4"
/*
* The ARTOP has 33 Mhz and "over clocked" timing tables. Until we
@@ -430,7 +431,7 @@ static int artop_init_one (struct pci_de
.udma_mask = ATA_UDMA4,
.port_ops = &artop6260_ops,
};
- static const struct ata_port_info info_626x_fast = {
+ static const struct ata_port_info info_628x = {
.sht = &artop_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
@@ -438,6 +439,14 @@ static int artop_init_one (struct pci_de
.udma_mask = ATA_UDMA5,
.port_ops = &artop6260_ops,
};
+ static const struct ata_port_info info_628x_fast = {
+ .sht = &artop_sht,
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &artop6260_ops,
+ };
const struct ata_port_info *ppi[] = { NULL, NULL };
if (!printed_version++)
@@ -455,13 +464,13 @@ static int artop_init_one (struct pci_de
}
else if (id->driver_data == 1) /* 6260 */
ppi[0] = &info_626x;
- else if (id->driver_data == 2) { /* 6260 or 6260 + fast */
+ else if (id->driver_data == 2) { /* 6280 or 6280 + fast */
unsigned long io = pci_resource_start(pdev, 4);
u8 reg;
- ppi[0] = &info_626x;
+ ppi[0] = &info_628x;
if (inb(io) & 0x10)
- ppi[0] = &info_626x_fast;
+ ppi[0] = &info_628x_fast;
/* Mac systems come up with some registers not set as we
will need them */
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
