Michal Piotrowski wrote: > Hi Andreas, > > [Adding Jeff and linux-ide to CC] > > On 13/08/07, Andreas Radke <a.radke@xxxxxxxx> wrote: >> running ArchLinux kernel 2.6.22.2 on a Abit IP35 Pro motherboard with >> Pro Intel P35 chipset (ICH9R + Jmicron) i have these entries all few >> minutes: >> >> ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400101 action 0x2 frozen >> ata1.00: (irq_stat 0x08000000, interface fatal error) >> ata1.00: cmd ca/00:f8:18:d2:27/00:00:00:00:00/e6 tag 0 cdb 0x0 data >> 126976 out res 50/00:00:80:2b:3d/00:00:00:00:00/e0 Emask 0x10 (ATA bus >> error) ata1: soft resetting port >> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> ata1.00: configured for UDMA/133 >> ata1: EH complete >> sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB) >> sd 0:0:0:0: [sda] Write Protect is off >> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't >> support DPO or FUA >> >> >> hard disc is a Western Digital 10k Raptor connected to the ICH9R. on >> the second port of the southbridge is another Samsung hard disc drive >> connected without errors. both controllers are running ahci mode. >> >> lsmod: >> sr_mod 16548 0 >> cdrom 38312 1 sr_mod >> sd_mod 25088 6 >> pata_jmicron 5888 0 >> ahci 22404 4 >> libata 119440 2 pata_jmicron,ahci >> >> i've tried changing the SATA cables and also the power wire to the >> disc without success. i checked the disc successfully with Hitachi >> drive fitness test. it has worked without any trouble so far in a Intel >> P965 ICH8 based mainboard. >> >> any idea how to find the reason? Most likely a hardware issue. * Please try a different harddrive/cable and connect to a different port. * Get a different power supply and see whether that changes anything. -- tejun - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
