Dear Tejun, Is 10.3 beta stable? Do I still need to patch it? If I do, what
version I should use? Can I apply a higher version patch to lower version of
kernel? Thanks!
--------------------------------------------------------------
Chia-Ming Liu, Ph.D.
Mixed Signal VLSI Design Group
Advanced Technology Research Center 235
Oklahoma State University
Website: http://msvlsi.okstate.edu
US Mail: 202 Engineering South Stillwater, OK 74078
Phone: 405-744-1662, 405-744-6241
Fax: 405-744-9198
----- Original Message -----
From: "Tejun Heo" <htejun@xxxxxxxxx>
To: "chia-ming liu" <chiaming.liu@xxxxxxxxx>
Cc: <linux-ide@xxxxxxxxxxxxxxx>; <liuc@xxxxxxxxxxx>
Sent: Tuesday, August 21, 2007 9:45 PM
Subject: Re:
chia-ming liu wrote:
Dear Tejun, I am not very good at linux and just enough to get by. I
have tried to use your patch by issuing the command 'patch -p1 <
combined.patch' and I receive this
msvlsi63:~/libata-tj-2.6.18.1-20061020 # patch -p1 < combined.patch
can't find file to patch at input line 5
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|Index: work/drivers/scsi/Kconfig
|===================================================================
|--- work.orig/drivers/scsi/Kconfig 2006-10-20 10:48:25.000000000
+0900
|+++ work/drivers/scsi/Kconfig 2006-10-20 10:48:35.000000000 +0900
--------------------------
File to patch:
Then, I opened combined.path and look for line 5
source "drivers/scsi/megaraid/Kconfig.megaraid"
which point out the file I don't have. Am I missing something? I have
Opensuse 10.2 and Norco DS-1220 disk array which has Silicon Image
3726 port multiplier.
I don't have any driver install but Suse has recognized the PCI card
with Silicon Image 3124.
OpenSUSE 10.3 Beta contains PMP support. I think that will be easier.
--
tejun
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
