Hello, Jonathan Bastien-Filiatrault wrote: > Hello, > > I am the owner of a Dell Latitude D620 notebook with an ICH7 SATA > controller, unfortunately, the BIOS does not offer the option of using > "native mode" instead of "compatibility mode" when it comes to SATA. For > now, the ata_piix runs happily in compatibility mode. Looking at the > ICH7 docs, I found that poking register 0x90 in PCI configuration space > with value 0x40 should enable AHCI. However, there are some issues with > poking that register with setpci in an early initramfs: > > > - The kernel does not seem to update the device id from PCI config > space, which changes with the controller mode (it would seem the PCI > subsystem keeps a copy) > > - Poking PCI registers from userspace is far from ideal > > > It would be great if the AHCI driver (or otherwise) had a > "force_ich7_ahci" to properly setup and initialize this device in full > "native" AHCI mode. This option would be greatly welcome from users like > me who have a stupid bios (eh, who doesn't). Sorry but most BIOSen don't map ABAR unless it supports AHCI and there usually isn't a hole to fit in ABAR afterwards unless the kernel completely reallocates IO resources, which, again unfortunately, can't be done reliably cuz machines can be quirky and might puke if addresses aren't laid out as their BIOSen would do. So, you'll have to live with ata_piix. -- tejun - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html