Linux Device Tree
[Prev Page][Next Page]
- Re: [Patch v2 1/2] dt-bindings: make sid and broadcast reg optional
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 2/3] arm64: dts: marvell: turris-mox: drop unneeded flash address/size-cells
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH 1/3] arm64: dts: marvell: eDPU: drop redundant address/size-cells
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH 1/3] dt-bindings: leds: add LED_FUNCTION_FNLOCK
- From: Gergo Koteles <soyer@xxxxxx>
- [PATCH 3/3] arm64: dts: marvell: espressobin-ultra: fix Ethernet Switch unit address
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 2/3] arm64: dts: marvell: turris-mox: drop unneeded flash address/size-cells
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 1/3] arm64: dts: marvell: eDPU: drop redundant address/size-cells
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 3/3] phy: freescale: imx8q-hsio: Add i.MX8Q HSIO PHY driver support
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2] dt-bindings: dma: snps,dma-spear1340: Fix data{-,_}width schema
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi
- From: Alexey Minnekhanov <alexeymin@xxxxxxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: rockchip: grf: Add missing type to 'pcie-phy' node
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi
- From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
- Re: [PATCH net-next] dt-bindings: net: snps,dwmac: Align 'snps,priority' type definition
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 2/3] dt-bindings: phy: Add i.MX8Q HSIO SerDes PHY binding
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: iio: imu: add icm42688 inside inv_icm42600
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2 17/18] dt-bindings: pci: rockchip,rk3399-pcie-ep: Add ep-gpios property
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: input: Add Himax HX83102J touchscreen
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: leds: add LED_FUNCTION_FNLOCK
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: watchdog: Convert Aspeed binding to DT schema
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: display: bridge: lt8912b: document 'lontium,pn-swap' property
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: mfd: syscon: Add ti,am62p-cpsw-mac-efuse compatible
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 3/3] dt-bindings: leds: leds-qcom-lpg: Add support for PMI8950 PWM
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: timer: renesas,cmt: Add R-Car V4M support
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: timer: renesas,tmu: Add R-Car V4M support
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH RFT 01/10] arm64: dts: microchip: sparx5: fix mdio reg
- From: Conor Dooley <conor@xxxxxxxxxx>
- [PATCH v4 2/2] media: dt-bindings: ovti,ov2680: Document link-frequencies
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [PATCH v1 1/5] dt-bindings: pwm: Add Loongson PWM controller
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v4 1/2] media: dt-bindings: ovti,ov2680: Fix the power supply names
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [PATCH 3/3] arm64: dts: qcom: msm8996: Add missing UFS host controller reset
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH v1 5/5] LoongArch: dts: Add PWM support to Loongson-2K2000
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2 12/13] ASoC: dt-bindings: davinci-mcbsp: Add the 'ti,T1-framing-{rx/tx}' flags
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 1/3] dt-bindings: phy: phy-imx8-pcie: Add binding for i.MX8Q HSIO SerDes PHY
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: pci: altera: covert to yaml
- From: matthew.gerlach@xxxxxxxxxxxxxxx
- Re: [RFC PATCH 5/6] watchdog: ROHM BD96801 PMIC WDG driver
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: ti: k3-j722s: Disable ethernet ports by default
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- Re: [PATCH 1/2] drm/bridge: lt8912b: add support for P/N pin swap
- From: Francesco Dolcini <francesco@xxxxxxxxxx>
- Re: [PATCH v6 3/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v7 4/4] pinctrl: Implementation of the generic scmi-pinctrl driver
- From: Cristian Marussi <cristian.marussi@xxxxxxx>
- Re: [PATCH v2 1/3] dt-bindings: leds: Add Silergy SY7802 flash LED
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 12/15] dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8188
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: ti: k3-j722s: Disable ethernet ports by default
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH v1 6/6] clk: meson: a1: add Amlogic A1 CPU clock controller driver
- From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
- Re: [PATCH v3] clk: starfive: pll: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: ti: k3-j722s: Disable ethernet ports by default
- From: "Michael Walle" <mwalle@xxxxxxxxxx>
- Re: [PATCH v5 0/5] PCI: dwc: Add common pme_turn_off message by using outbound iATU
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH 1/2] dt-bindings: phy: qmp-ufs: Fix PHY clocks for SC7180
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [RFC PATCH 5/6] watchdog: ROHM BD96801 PMIC WDG driver
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: ti: k3-am642-phyboard-electra-rdk: Increase CAN max bitrate
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH] arm64: dts: ti: k3-j722s: Disable ethernet ports by default
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH v6 1/4] dt-bindings: clock: add i.MX95 clock header
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 2/2] ASoC: dt-bindings: fsl-asoc-card: convert to YAML
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: ti: k3-am642-phyboard-electra-rdk: Increase CAN max bitrate
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH v1 6/6] clk: meson: a1: add Amlogic A1 CPU clock controller driver
- From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
- [PATCH 2/2] arm64: dts: ti: k3-am642-phyboard-electra-rdk: Increase CAN max bitrate
- From: Nathan Morrisson <nmorrisson@xxxxxxxxxx>
- [PATCH 0/2] Increase CAN max bitrate for phyCORE-AM62x and phyCORE-am64x
- From: Nathan Morrisson <nmorrisson@xxxxxxxxxx>
- [PATCH 1/2] arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Increase CAN max bitrate
- From: Nathan Morrisson <nmorrisson@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: clock: qcom: Update SM8150 videocc bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH net-next 2/3] net: stmmac: add support for RZ/N1 GMAC
- From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
- Re: [PATCH V5] PCI: Add support for preserving boot configuration
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 3/3] arm64: dts: msm8996: add fastrpc nodes
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v6 3/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support
- From: Cristian Marussi <cristian.marussi@xxxxxxx>
- Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH net-next 2/2] net: stmmac: dwmac-socfpga: use pcs_init/pcs_exit
- From: "Russell King (Oracle)" <rmk+kernel@xxxxxxxxxxxxxxx>
- [PATCH net-next 1/2] net: stmmac: introduce pcs_init/pcs_exit stmmac operations
- From: "Russell King (Oracle)" <rmk+kernel@xxxxxxxxxxxxxxx>
- Re: [PATCH net-next 2/3] net: stmmac: add support for RZ/N1 GMAC
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH net-next v6 11/17] dt-bindings: net: pse-pd: Add another way of describing several PSE PIs
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi
- From: Marc Gonzalez <mgonzalez@xxxxxxxxxx>
- Re: [RFC PATCH v2 4/5] clk: meson: a1: add the audio clock controller driver
- From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
- Re: [PATCH v8 1/3] input: pm8xxx-vibrator: refactor to support new SPMI vibrator
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- [PATCH] arm64: dts: ti: k3-j722s-evm: Enable eMMC support
- From: Michael Walle <mwalle@xxxxxxxxxx>
- [PATCH] arm64: dts: ti: k3-j722s: Disable ethernet ports by default
- From: Michael Walle <mwalle@xxxxxxxxxx>
- [PATCH v5 2/4] arm64: dts: imx8dxl: add lpuart device in cm40 subsystem
- From: Frank Li <Frank.Li@xxxxxxx>
- Re: [PATCH 1/7] arm64: dts: imx8-ss-lsio: fix pwm lpcg indices
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [RFC PATCH v2 1/5] clk: meson: axg: move reset controller's code to separate module
- From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
- Re: [PATCH v1 2/6] clk: meson: a1: pll: support 'syspll' general-purpose PLL for CPU clock
- From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v7 2/2] dmaengine: Loongson1: Add Loongson-1 APB DMA driver
- From: Huacai Chen <chenhuacai@xxxxxxxxxx>
- Re: [PATCH v6 2/6] interconnect: icc-clk: Remove tristate from INTERCONNECT_CLK
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH 3/3] arm64: dts: msm8996: add fastrpc nodes
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- [PATCH] dt-bindings: timer: renesas,cmt: Add R-Car V4M support
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: leds: add LED_FUNCTION_FNLOCK
- From: Gergo Koteles <soyer@xxxxxx>
- [PATCH v5 0/4] arm64: dts: imx8: add cm40 and cm40_uart
- From: Frank Li <Frank.Li@xxxxxxx>
- Re: [PATCH v4 4/4] arm64: dts: S32G3: Introduce device tree for S32G-VNP-RDB3
- From: Shawn Guo <shawnguo2@xxxxxxxx>
- [PATCH v5 4/4] dts: arm64: imx8dxl-evk: add lpuart1 and cm40 uart
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v5 3/4] arm64: dts: imx8dxl: update cm40 irq number information
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v5 1/4] arm64: dts: imx8: add cm40 subsystem dtsi
- From: Frank Li <Frank.Li@xxxxxxx>
- Re: [PATCH v3 9/9] arm64: dts: qcom: sm8150-hdk: rename Type-C HS endpoints
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH v3 8/9] arm64: dts: qcom: x1e80100: describe USB signals properly
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH v3 7/9] arm64: dts: qcom: sc8280xp: describe USB signals properly
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [Patch v2 1/2] dt-bindings: make sid and broadcast reg optional
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 6/9] arm64: dts: qcom: sc8180x: describe USB signals properly
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH v3 4/9] arm64: dts: qcom: sm8250: add a link between DWC3 and QMP PHY
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH v3 3/9] arm64: dts: qcom: sm8250: describe HS signals properly
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- [PATCH v3 11/11] PCI: imx6: Add i.MX8Q PCIe support
- From: Frank Li <Frank.Li@xxxxxxx>
- Re: [PATCH v4 1/4] dt-bindings: arm: fsl: add NXP S32G3 board
- From: Shawn Guo <shawnguo2@xxxxxxxx>
- [PATCH] dt-bindings: timer: renesas,tmu: Add R-Car V4M support
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- Re: [PATCH v7 3/4] ASoc: PCM6240: Add compile item for PCM6240 Family driver
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- RE: [PATCH v6 3/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support
- From: Peng Fan <peng.fan@xxxxxxx>
- [PATCH v3 10/11] dt-bindings: imx6q-pcie: Add i.MX8Q pcie compatible string
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v3 09/11] PCI: imx: Consolidate redundant if-checks
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v3 08/11] PCI: imx: Config look up table(LUT) to support MSI ITS and IOMMU for i.MX95
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v3 07/11] PCI: imx: Simplify switch-case logic by involve core_reset callback
- From: Frank Li <Frank.Li@xxxxxxx>
- Re: [PATCH v2 3/3] arm64: dts: qcom: msm8998: set qcom,no-msa-ready-indicator for wifi
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- [PATCH v3 06/11] PCI: imx: Simplify switch-case logic by involve set_ref_clk callback
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v3 05/11] MAINTAINERS: pci: imx: update imx6* to imx* since rename driver file
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v3 04/11] PCI: imx6: Rename pci-imx6.c to pcie-imx.c
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v3 03/11] PCI: imx6: Rename imx6_* with imx_*
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v3 01/11] PCI: imx6: Fix PCIe link down when i.MX8MM and i.MX8MP PCIe is EP mode
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v3 02/11] PCI: imx6: Fix i.MX8MP PCIe EP can not trigger MSI
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH v3 00/11] PCI: imx6: Fix\rename\clean up and add lut information for imx95
- From: Frank Li <Frank.Li@xxxxxxx>
- Re: [PATCH v1 2/6] clk: meson: a1: pll: support 'syspll' general-purpose PLL for CPU clock
- From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
- Re: [PATCH 2/3] arm64: dts: qcom: msm8996: add glink-edge nodes
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH 22/23] drivers: media: i2c: imx258: Add support for powerdown gpio
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH v1 6/6] clk: meson: a1: add Amlogic A1 CPU clock controller driver
- From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
- Re: [PATCH v2 2/3] dt-bindings: phy: Add i.MX8Q HSIO SerDes PHY binding
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH 0/3] media: i2c: Add imx283 camera sensor driver
- From: Konstantin Ryabitsev <konstantin@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v7 4/4] pinctrl: Implementation of the generic scmi-pinctrl driver
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH v7 4/4] pinctrl: Implementation of the generic scmi-pinctrl driver
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
- RE: [PATCH v7 3/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support
- From: Peng Fan <peng.fan@xxxxxxx>
- Re: [PATCH v7 3/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
- Re: [PATCH v6 0/4] fpga: xilinx-selectmap: add new driver
- From: Charles Perry <charles.perry@xxxxxxxxxxxxxxxxxxxx>
- RE: [PATCH v6 3/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support
- From: Peng Fan <peng.fan@xxxxxxx>
- Re: [PATCH RFT 01/10] arm64: dts: microchip: sparx5: fix mdio reg
- From: Steen Hegelund <steen.hegelund@xxxxxxxxxxxxx>
- Re: [PATCH 6/6] iio: adc: ad7173: Add support for AD411x devices
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- RE: [PATCH v7 4/4] pinctrl: Implementation of the generic scmi-pinctrl driver
- From: Peng Fan <peng.fan@xxxxxxx>
- Re: [PATCH 1/3] dt-bindings: leds: add LED_FUNCTION_FNLOCK
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH net-next 2/3] net: stmmac: add support for RZ/N1 GMAC
- From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: arm: ti: Add BeagleY-AI
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH net-next 1/3] dt-bindings: net: renesas,rzn1-gmac: Document RZ/N1 GMAC support
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH net-next v6 14/17] dt-bindings: net: pse-pd: Add bindings for PD692x0 PSE controller
- From: Rob Herring <robh@xxxxxxxxxx>
- RE: [PATCH v7 3/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support
- From: Peng Fan <peng.fan@xxxxxxx>
- [Patch v2 2/2] memory: tegra: make sid and broadcast regions optional
- From: Sumit Gupta <sumitg@xxxxxxxxxx>
- [Patch v2 1/2] dt-bindings: make sid and broadcast reg optional
- From: Sumit Gupta <sumitg@xxxxxxxxxx>
- [Patch v2 0/2] memory: tegra: Skip restricted register access from Guest
- From: Sumit Gupta <sumitg@xxxxxxxxxx>
- Re: [PATCH net-next v6 11/17] dt-bindings: net: pse-pd: Add another way of describing several PSE PIs
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v7 4/4] pinctrl: Implementation of the generic scmi-pinctrl driver
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
- [PATCH 3/3] platform/x86: ideapad-laptop: add FnLock LED class device
- From: Gergo Koteles <soyer@xxxxxx>
- [PATCH 2/3] platform/x86: ideapad-laptop: add fn_lock_get/set functions
- From: Gergo Koteles <soyer@xxxxxx>
- [PATCH 1/3] dt-bindings: leds: add LED_FUNCTION_FNLOCK
- From: Gergo Koteles <soyer@xxxxxx>
- [PATCH 0/3] add FnLock LED class device to ideapad laptops
- From: Gergo Koteles <soyer@xxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: mfd: Add ROHM BD71828 system-power-controller property
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- Re: [PATCH v7 3/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
- Re: [RFC PATCH 1/2] spi: dt-bindings: add Siflower Quad SPI controller
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [RFC PATCH 6/6] MAINTAINERS: Add ROHM BD96801 'scalable PMIC' entries
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- [RFC PATCH 5/6] watchdog: ROHM BD96801 PMIC WDG driver
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- [RFC PATCH 3/6] mfd: support ROHM BD96801 PMIC core
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- [RFC PATCH 2/6] dt-bindings: mfd: bd96801 PMIC core
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- [RFC PATCH 1/6] dt-bindings: ROHM BD96801 PMIC regulators
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- [RFC PATCH 0/6] Support ROHM BD96801 scalable PMIC
- From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
- Re: [PATCH v6 3/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v6 08/11] pinctrl: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
- From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
- Re: [PATCH v4 2/2] media: i2c: Add imx283 camera sensor driver
- From: Umang Jain <umang.jain@xxxxxxxxxxxxxxxx>
- [RESEND PATCH v9 4/4] arm64: dts: st: add rcc support for STM32MP25
- From: <gabriel.fernandez@xxxxxxxxxxx>
- [RESEND PATCH v9 3/4] clk: stm32: introduce clocks for STM32MP257 platform
- From: <gabriel.fernandez@xxxxxxxxxxx>
- [RESEND PATCH v9 2/4] dt-bindings: stm32: update DT bingding for stm32mp25
- From: <gabriel.fernandez@xxxxxxxxxxx>
- [RESEND PATCH v9 0/4] Introduce STM32MP257 clock driver
- From: <gabriel.fernandez@xxxxxxxxxxx>
- [RESEND PATCH v9 1/4] clk: stm32mp13: use platform device APIs
- From: <gabriel.fernandez@xxxxxxxxxxx>
- Re: [PATCH 1/6] arm64: dts: marvell: ap80x: fix IOMMU unit address
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
- Re: [PATCH v6 3/5] crypto: tegra: Add Tegra Security Engine driver
- From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 00/18] Improve PCI memory mapping API
- From: Rick Wertenbroek <rick.wertenbroek@xxxxxxxxx>
- RE: [PATCH v6 3/5] crypto: tegra: Add Tegra Security Engine driver
- From: Akhil R <akhilrajeev@xxxxxxxxxx>
- [PATCH net-next 3/3] ARM: dts: r9a06g032: describe GMAC1
- From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
- [PATCH net-next 2/3] net: stmmac: add support for RZ/N1 GMAC
- From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
- [PATCH net-next 1/3] dt-bindings: net: renesas,rzn1-gmac: Document RZ/N1 GMAC support
- From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
- [PATCH net-next 0/3] net: stmmac: Add support for RZN1 GMAC devices
- From: Romain Gantois <romain.gantois@xxxxxxxxxxx>
- [PATCH 3/3] dt-bindings: leds: leds-qcom-lpg: Add support for PMI8950 PWM
- From: Gianluca Boiano <morf3089@xxxxxxxxx>
- [PATCH 2/3] arm64: dts: qcom: pmi8950: add pwm node
- From: Gianluca Boiano <morf3089@xxxxxxxxx>
- [PATCH 1/3] leds: qcom-lpg: Add support for PMI8950 PWM
- From: Gianluca Boiano <morf3089@xxxxxxxxx>
- [PATCH 0/3] This patch series introduces support for PMI8950 PWM in leds-qcom-lpg.
- From: Gianluca Boiano <morf3089@xxxxxxxxx>
- Re: [PATCH v6 08/11] pinctrl: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: mfd: syscon: Add ti,am62p-cpsw-mac-efuse compatible
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- Re: [RFC PATCH 1/2] spi: dt-bindings: add Siflower Quad SPI controller
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v4 4/5] dt-bindings: fsl-imx-sdma: Add I2C peripheral types ID
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v1 2/6] clk: meson: a1: pll: support 'syspll' general-purpose PLL for CPU clock
- From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v6 3/6] interconnect: icc-clk: Add devm_icc_clk_register
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v6 3/4] dt-bindings: watchdog: aspeed-wdt: Add aspeed,scu
- From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] dt-bindings: mfd: syscon: Add ti,am62p-cpsw-mac-efuse compatible
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v8 6/7] spmi: pmic-arb: Register controller for bus instead of arbiter
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v8 7/7] spmi: pmic-arb: Add multi bus support
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v8 5/7] spmi: pmic-arb: Make core resources acquiring a version operation
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v8 4/7] spmi: pmic-arb: Make the APID init a version operation
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v8 3/7] spmi: pmic-arb: Fix some compile warnings about members not being described
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v8 2/7] dt-bindings: spmi: Deprecate qcom,bus-id
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v8 1/7] dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- [PATCH v8 0/7] spmi: pmic-arb: Add support for multiple buses
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- Re: [PATCH 1/2] ARM: boot: dts: microchip: at91-sama7g5ek: Replace regulator-suspend-voltage with the valid property
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH] dt-bindings: watchdog: Convert Aspeed binding to DT schema
- From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v1 6/6] clk: meson: a1: add Amlogic A1 CPU clock controller driver
- From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: boot: dts: microchip: at91-sama7g5ek: Replace regulator-suspend-voltage with the valid property
- From: <Andrei.Simion@xxxxxxxxxxxxx>
- Re: [PATCH v6 3/6] interconnect: icc-clk: Add devm_icc_clk_register
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v3 2/2] mfd: rohm-bd71828: Add power off functionality
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: mfd: Add ROHM BD71828 system-power-controller property
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- [PATCH v3 0/2] mfd: rohm-bd71828: Add power off
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH v6 3/6] interconnect: icc-clk: Add devm_icc_clk_register
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- RE: [EXT] Re: [PATCH v10 09/11] arm64: dts: imx93-11x11-evk: enable usb and typec nodes
- From: Xu Yang <xu.yang_2@xxxxxxx>
- Re: [PATCH 5/5] arm64: dts: qcom: x1e80100: Enable cpufreq
- From: Sudeep Holla <sudeep.holla@xxxxxxx>
- RE: [EXT] Re: [PATCH v10 03/11] arm64: dts: imx8ulp-evk: enable usb nodes and add ptn5150 nodes
- From: Xu Yang <xu.yang_2@xxxxxxx>
- Re: [PATCH v6 4/6] clk: qcom: common: Add interconnect clocks support
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- Re: [PATCH v1 6/6] clk: meson: a1: add Amlogic A1 CPU clock controller driver
- From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v6 3/6] interconnect: icc-clk: Add devm_icc_clk_register
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH 2/2] dt-bindings: display: bridge: lt8912b: document 'lontium,pn-swap' property
- From: Alexandru Ardelean <alex@xxxxxxxxxxx>
- [PATCH 1/2] drm/bridge: lt8912b: add support for P/N pin swap
- From: Alexandru Ardelean <alex@xxxxxxxxxxx>
- RE: [EXT] Re: [PATCH v10 08/11] arm64: dts: imx93: add usb nodes
- From: Xu Yang <xu.yang_2@xxxxxxx>
- [PATCH] dt-bindings: mfd: syscon: Add ti,am62p-cpsw-mac-efuse compatible
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- Re: [PATCH 1/1] arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
- From: Shawn Guo <shawnguo2@xxxxxxxx>
- Re: [PATCH v5 2/2] backlight: Add new lm3509 backlight driver
- From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
- Re: [PATCH v7 2/2] dmaengine: Loongson1: Add Loongson-1 APB DMA driver
- From: Keguang Zhang <keguang.zhang@xxxxxxxxx>
- [PATCH v2 4/4] HID: Load firmware directly from file to IC
- From: Allen_Lin <allencl_lin@xxxxxxxxxxx>
- [PATCH v2 3/4] HID: Add DRM panel follower function
- From: Allen_Lin <allencl_lin@xxxxxxxxxxx>
- [PATCH v2 2/4] HID: Add Himax HX83102J touchscreen driver
- From: Allen_Lin <allencl_lin@xxxxxxxxxxx>
- [PATCH v2 1/4] dt-bindings: input: Add Himax HX83102J touchscreen
- From: Allen_Lin <allencl_lin@xxxxxxxxxxx>
- [PATCH v2 0/4] HID: Add support for Himax HX83102j touchscreen
- From: Allen_Lin <allencl_lin@xxxxxxxxxxx>
- Re: [PATCH v6 6/6] arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v6 4/6] clk: qcom: common: Add interconnect clocks support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v6 3/6] interconnect: icc-clk: Add devm_icc_clk_register
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v6 3/6] interconnect: icc-clk: Add devm_icc_clk_register
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v6 2/6] interconnect: icc-clk: Remove tristate from INTERCONNECT_CLK
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: remove startup-delay-us from vcc3v3_pcie2x1l0 on rock-5b
- From: Heiko Stübner <heiko@xxxxxxxxx>
- Re: [PATCH 1/2] ARM: boot: dts: microchip: at91-sama7g5ek: Replace regulator-suspend-voltage with the valid property
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v6 6/6] arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v6 5/6] clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v6 4/6] clk: qcom: common: Add interconnect clocks support
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v6 3/6] interconnect: icc-clk: Add devm_icc_clk_register
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v6 2/6] interconnect: icc-clk: Remove tristate from INTERCONNECT_CLK
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v6 1/6] dt-bindings: interconnect: Add Qualcomm IPQ9574 support
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- [PATCH v6 0/6] Add interconnect driver for IPQ9574 SoC
- From: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
- Re: [PATCH v3 3/9] arm64: dts: qcom: sm8250: describe HS signals properly
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: ti: k3-am62p-main: use eFuse MAC Address for CPSW3G Port 1
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- Re: [PATCH v7 3/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support
- From: Cristian Marussi <cristian.marussi@xxxxxxx>
- Re: [PATCH v2 4/4] arm64: dts: qcom: msm8976: Add WCNSS node
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- RE: [EXT] Re: [PATCH v10 02/11] arm64: dts: imx8ulp: add usb nodes
- From: Xu Yang <xu.yang_2@xxxxxxx>
- Re: [PATCH 0/2] Fix the regulator-state-standby definition
- From: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
- Re: [PATCH v1] arm64: dts: freescale: verdin-imx8mp: enable Verdin I2C_3_HDMI interface
- From: Shawn Guo <shawnguo2@xxxxxxxx>
- Re: [PATCH AUTOSEL 6.8 36/98] arm64: dts: sc8280xp: correct DMIC2 and DMIC3 pin config node names
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v5 7/7] iio: accel: adxl345: Add spi-3wire option
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCH v4 2/2] media: i2c: Add imx283 camera sensor driver
- From: Umang Jain <umang.jain@xxxxxxxxxxxxxxxx>
- [PATCH v4 1/2] media: dt-bindings: media: Add bindings for IMX283
- From: Umang Jain <umang.jain@xxxxxxxxxxxxxxxx>
- [PATCH v4 0/2] media: i2c: Add imx283 camera sensor driver
- From: Umang Jain <umang.jain@xxxxxxxxxxxxxxxx>
- Re: [PATCH v5 09/11] regulator: tps6594-regulator: Add TI TPS65224 PMIC regulators
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- [PATCH v2 0/2] iio: imu: inv_icm42600: add support of ICM-42688-P
- From: inv.git-commit@xxxxxxx
- Re: [PATCH v1 6/6] clk: meson: a1: add Amlogic A1 CPU clock controller driver
- From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
- Re: [PATCH] arm64: dts: ti: k3-am62p-main: use eFuse MAC Address for CPSW3G Port 1
- From: Vignesh Raghavendra <vigneshr@xxxxxx>
- [PATCH v2 1/2] dt-bindings: iio: imu: add icm42688 inside inv_icm42600
- From: inv.git-commit@xxxxxxx
- Re: [PATCH 1/3] media: mediatek: vcodec: fix h264 multi statless decoder smatch warning
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- [PATCH] arm64: dts: ti: k3-am62p-main: use eFuse MAC Address for CPSW3G Port 1
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- Re: [PATCH v3 3/9] arm64: dts: qcom: sm8250: describe HS signals properly
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH v1 6/6] clk: meson: a1: add Amlogic A1 CPU clock controller driver
- From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
- Re: [PATCH v2 1/8] dt-bindings: clock: add Loongson-2K expand clock index
- From: Binbin Zhou <zhoubb.aaron@xxxxxxxxx>
- Re: [PATCH 3/3] arm64: dts: rockchip: Remove UART2 from RGB30
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH v3] clk: starfive: pll: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz
- From: Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>
- [PATCH v2 2/2] iio: imu: inv_icm42600: add support of ICM-42688-P
- From: inv.git-commit@xxxxxxx
- Re: [PATCH v2 2/2] arm64: dts: qcom: qcs6490-rb3gen2: Enable various remoteprocs
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v2 1/2] arm64: dts: qcom: qcm6490-idp: Enable various remoteprocs
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 2/2] ARM: boot: dts: microchip: at91-sama7g54_curiosity: Replace regulator-suspend-voltage with the valid property
- From: Andrei Simion <andrei.simion@xxxxxxxxxxxxx>
- [PATCH 1/2] ARM: boot: dts: microchip: at91-sama7g5ek: Replace regulator-suspend-voltage with the valid property
- From: Andrei Simion <andrei.simion@xxxxxxxxxxxxx>
- [PATCH 0/2] Fix the regulator-state-standby definition
- From: Andrei Simion <andrei.simion@xxxxxxxxxxxxx>
- Re: [PATCH v10 09/11] arm64: dts: imx93-11x11-evk: enable usb and typec nodes
- From: Shawn Guo <shawnguo2@xxxxxxxx>
- Re: [PATCH v7 2/2] dmaengine: Loongson1: Add Loongson-1 APB DMA driver
- From: Huacai Chen <chenhuacai@xxxxxxxxxx>
- Re: [PATCH v1 2/6] clk: meson: a1: pll: support 'syspll' general-purpose PLL for CPU clock
- From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
- [PATCH v2 2/2] arm64: dts: qcom: qcs6490-rb3gen2: Enable various remoteprocs
- From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
- [PATCH v2 1/2] arm64: dts: qcom: qcm6490-idp: Enable various remoteprocs
- From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
- [PATCH v2 0/2] Enable various remoteprocs for qcm6490-idp and qcs6490-rb3gen2
- From: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
- RE: [PATCH v6 3/5] crypto: tegra: Add Tegra Security Engine driver
- From: Akhil R <akhilrajeev@xxxxxxxxxx>
- Re: [PATCH v2 0/3] dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Drive-by fixes
- From: "Ivan T. Ivanov" <iivanov@xxxxxxx>
- Re: [PATCH v2 1/8] dt-bindings: clock: add Loongson-2K expand clock index
- From: Huacai Chen <chenhuacai@xxxxxxxxxx>
- Re: [PATCH v7 6/6] spmi: pmic-arb: Add multi bus support
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH v7 6/6] spmi: pmic-arb: Add multi bus support
- From: Abel Vesa <abel.vesa@xxxxxxxxxx>
- Re: [PATCH v10 08/11] arm64: dts: imx93: add usb nodes
- From: Shawn Guo <shawnguo2@xxxxxxxx>
- Re: [PATCH v10 03/11] arm64: dts: imx8ulp-evk: enable usb nodes and add ptn5150 nodes
- From: Shawn Guo <shawnguo2@xxxxxxxx>
- Re: [PATCH v10 02/11] arm64: dts: imx8ulp: add usb nodes
- From: Shawn Guo <shawnguo2@xxxxxxxx>
- Re: [PATCH 0/3] media: i2c: Add imx283 camera sensor driver
- From: Umang Jain <umang.jain@xxxxxxxxxxxxxxxx>
- Re: [PATCH 3/3] fixups
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH] media: dt-bindings: ovti,ov2680: Document clock/data-lanes
- From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
- [PATCH 3/3] fixups
- From: Umang Jain <umang.jain@xxxxxxxxxxxxxxxx>
- [PATCH 2/3] media: i2c: Add imx283 camera sensor driver
- From: Umang Jain <umang.jain@xxxxxxxxxxxxxxxx>
- [PATCH 1/3] media: dt-bindings: media: Add bindings for IMX283
- From: Umang Jain <umang.jain@xxxxxxxxxxxxxxxx>
- [PATCH 0/3] media: i2c: Add imx283 camera sensor driver
- From: Umang Jain <umang.jain@xxxxxxxxxxxxxxxx>
- Re: [PATCH v7 6/6] spmi: pmic-arb: Add multi bus support
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH v7 5/6] spmi: pmic-arb: Register controller for bus instead of arbiter
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH 2/4] firmware: ti_sci: Unconditionally register reset handler
- From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
- Re: [PATCH 1/4] firmware: ti_sci: Use devm_register_restart_handler()
- From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
- Re: [PATCH v7 3/6] spmi: pmic-arb: Make the APID init a version operation
- From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: debix-a: Remove i2c2 from base .dts
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- [PATCH v1 5/5] LoongArch: dts: Add PWM support to Loongson-2K2000
- From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
- [PATCH v1 4/5] LoongArch: dts: Add PWM support to Loongson-2K1000
- From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
- Re: [PATCH] arm64: dts: debix-a: Remove i2c2 from base .dts
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v1 2/5] pwm: Add Loongson PWM controller support
- From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
- [PATCH v1 3/5] LoongArch: dts: Add PWM support to Loongson-2K0500
- From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
- [PATCH v1 1/5] dt-bindings: pwm: Add Loongson PWM controller
- From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
- [PATCH v1 0/5] pwm: Introduce pwm driver for the Loongson family chips
- From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
- Re: [PATCH v2 17/18] dt-bindings: pci: rockchip,rk3399-pcie-ep: Add ep-gpios property
- From: Damien Le Moal <dlemoal@xxxxxxxxxx>
- Re: [PATCH v3 6/7] PCI: dwc: rcar-gen4: Add support for r8a779g0
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH 06/10] dt-bindings: iio: dac: add bindings doc for AXI DAC driver
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH 07/10] dt-bindings: iio: dac: add bindings doc for AD9739A
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH 07/10] dt-bindings: iio: dac: add bindings doc for AD9739A
- From: Nuno Sá <noname.nuno@xxxxxxxxx>
- Re: [PATCH v6 3/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support
- From: Cristian Marussi <cristian.marussi@xxxxxxx>
- Re: [PATCH v2 17/18] dt-bindings: pci: rockchip,rk3399-pcie-ep: Add ep-gpios property
- From: Damien Le Moal <dlemoal@xxxxxxxxxx>
- Re: [PATCH v2 17/18] dt-bindings: pci: rockchip,rk3399-pcie-ep: Add ep-gpios property
- From: Damien Le Moal <dlemoal@xxxxxxxxxx>
- Re: [PATCH v3] dt-bindings: ata: ahci-da850: Convert to dtschema
- From: Animesh Agarwal <animeshagarwal28@xxxxxxxxx>
- [PATCH] arch: arm: mxc: phyCARD-i.MX27: Add USB support
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- Re: [PATCH v2 17/18] dt-bindings: pci: rockchip,rk3399-pcie-ep: Add ep-gpios property
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3] dt-bindings: ata: ahci-da850: Convert to dtschema
- From: Damien Le Moal <dlemoal@xxxxxxxxxx>
- Re: [PATCH AUTOSEL 6.8 36/98] arm64: dts: sc8280xp: correct DMIC2 and DMIC3 pin config node names
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v3 1/4] dt-bindings: panel: Add LG SW43408 MIPI-DSI panel
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: timer: renesas,tmu: Make interrupt-names required
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [PATCH v2 13/13] ASoC: ti: davinci-i2s: Add T1 framing support
- From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
- [PATCH v2 12/13] ASoC: dt-bindings: davinci-mcbsp: Add the 'ti,T1-framing-{rx/tx}' flags
- From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
- [PATCH v2 11/13] ASoC: ti: davinci-i2s: Add S24_LE to supported formats
- From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
- [PATCH v2 10/13] ASoC: ti: davinci-i2s: Link free-run mode to SND_SOC_DAIFMT_[GATED/CONT]
- From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
- [PATCH v2 09/13] ASoC: ti: davinci-i2s: Enable unexpected frame pulses detection
- From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
- [PATCH v2 08/13] ASoC: ti: davinci-i2s: Add handling of BP_FC format
- From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
- [PATCH v2 07/13] ASoC: ti: davinci-i2s: Add TDM support
- From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
- [PATCH v2 06/13] ASoC: ti: davinci-i2s: Delete unnecessary assignment
- From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
- [PATCH v2 05/13] ASoC: ti: davinci-i2s: Use external clock to drive sample rate generator
- From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
- [PATCH v2 04/13] ASoC: ti: davinci-i2s: Replace dev_err with dev_err_probe
- From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
- [PATCH v2 03/13] ASoC: ti: davinci-i2s: Remove the unused clk_input_pin attribute
- From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
- [PATCH v2 02/13] ASoC: dt-bindings: davinci-mcbsp: Add optional clock
- From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
- [PATCH v2 01/13] ASoC: dt-bindings: davinci-mcbsp: convert McBSP bindings to yaml schema
- From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
- [PATCH v2 00/13] ASoC: ti: davinci-i2s: Add features to McBSP driver
- From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
- Re: [PATCH v5 00/10] Improvments for tc358775 with support for tc358765
- From: "Michael Walle" <mwalle@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: debix-a: Remove i2c2 from base .dts
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- Re: [PATCH v2 06/15] dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8186
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3] dt-bindings: ata: ahci-da850: Convert to dtschema
- From: Damien Le Moal <dlemoal@xxxxxxxxxx>
- Re: [PATCH v3] dt-bindings: ata: ahci-da850: Convert to dtschema
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3 1/4] dt-bindings: panel: Add LG SW43408 MIPI-DSI panel
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v3] media: dt-bindings: ovti,ov2680: Document more properties
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH RFT 01/10] arm64: dts: microchip: sparx5: fix mdio reg
- From: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
- Re: [PATCH v6 0/1] Add property in dwmac-stm32 documentation
- From: Christophe ROULLIER <christophe.roullier@xxxxxxxxxxx>
- Re: [PATCH v5 1/1] dt-bindings: net: dwmac: Document STM32 property st,ext-phyclk
- From: Christophe ROULLIER <christophe.roullier@xxxxxxxxxxx>
- Re: [PATCH v3 1/9] dt-bindings: clk: qcom,dispcc-sm8x50: describe additional DP clocks
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v7 09/15] media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v2 3/3] phy: freescale: imx8q-hsio: Add i.MX8Q HSIO PHY driver support
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v2 2/3] dt-bindings: phy: Add i.MX8Q HSIO SerDes PHY binding
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v2 1/3] dt-bindings: phy: phy-imx8-pcie: Add binding for i.MX8Q HSIO SerDes PHY
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- [PATCH v2 0/3] Add i.MX8Q HSIO PHY driver support
- From: Richard Zhu <hongxing.zhu@xxxxxxx>
- Re: [PATCH v7 09/15] media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
- Re: [PATCH v1] Revise duty cycle for SMB9 and SMB10
- From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 2/3] arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 soc
- From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
- Re: [PATCH v3 00/15] Mediatek thermal sensor driver support for MT8186 and MT8188
- From: Nicolas Pitre <nico@xxxxxxxxxxx>
- [PATCH v2 12/15] dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8188
- From: Nicolas Pitre <nico@xxxxxxxxxxx>
- [PATCH v2 13/15] arm64: dts: mediatek: mt8188: add lvts definitions
- From: Nicolas Pitre <nico@xxxxxxxxxxx>
- [PATCH v2 15/15] arm64: dts: mediatek: mt8188: add default thermal zones
- From: Nicolas Pitre <nico@xxxxxxxxxxx>
- [PATCH v2 10/15] thermal/drivers/mediatek/lvts_thermal: provision for gt variable location
- From: Nicolas Pitre <nico@xxxxxxxxxxx>
- [PATCH v2 08/15] thermal/drivers/mediatek/lvts_thermal: add MT8186 support
- From: Nicolas Pitre <nico@xxxxxxxxxxx>
- [PATCH v2 11/15] thermal/drivers/mediatek/lvts_thermal: allow early empty sensor slots
- From: Nicolas Pitre <nico@xxxxxxxxxxx>
- [PATCH v2 14/15] thermal/drivers/mediatek/lvts_thermal: add MT8188 support
- From: Nicolas Pitre <nico@xxxxxxxxxxx>
- [PATCH v2 09/15] arm64: dts: mediatek: mt8186: add default thermal zones
- From: Nicolas Pitre <nico@xxxxxxxxxxx>
- [PATCH v2 04/15] thermal/drivers/mediatek/lvts_thermal: use offsets for every calibration byte
- From: Nicolas Pitre <nico@xxxxxxxxxxx>
- [PATCH v2 05/15] thermal/drivers/mediatek/lvts_thermal: guard against efuse data buffer overflow
- From: Nicolas Pitre <nico@xxxxxxxxxxx>
- [PATCH v2 03/15] thermal/drivers/mediatek/lvts_thermal: remove .hw_tshut_temp
- From: Nicolas Pitre <nico@xxxxxxxxxxx>
- [PATCH v2 01/15] thermal/drivers/mediatek/lvts_thermal: retrieve all calibration bytes
- From: Nicolas Pitre <nico@xxxxxxxxxxx>
- [PATCH v2 02/15] thermal/drivers/mediatek/lvts_thermal: move comment
- From: Nicolas Pitre <nico@xxxxxxxxxxx>
- [PATCH v3 00/15] Mediatek thermal sensor driver support for MT8186 and MT8188
- From: Nicolas Pitre <nico@xxxxxxxxxxx>
- [PATCH v2 07/15] arm64: dts: mediatek: mt8186: add lvts definitions
- From: Nicolas Pitre <nico@xxxxxxxxxxx>
- [PATCH v2 06/15] dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8186
- From: Nicolas Pitre <nico@xxxxxxxxxxx>
- Re: [PATCH v6 3/3] arm64: dts: imx93-11x11-evk: add pca9451a support
- From: Shawn Guo <shawnguo2@xxxxxxxx>
- Re: [PATCH] arm64: dts: imx8mp: Describe CSI2 GPIO expander on i.MX8MP DHCOM PDK3 board
- From: Shawn Guo <shawnguo2@xxxxxxxx>
- [PATCH v3 4/4] arm64: dts: qcom: sc8180x: add dp_p1 register blocks to DP nodes
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 1/4] dt-bindings: display/msm: sm8150-mdss: add DP node
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 3/4] arm64: dts: qcom: sc8180x: Drop flags for mdss irqs
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 2/4] arm64: dts: qcom: sc8180x: drop legacy property #stream-id-cells
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 0/4] arm64: dts: fix several display-related schema warnings
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 1/2] ARM: dts: imx6qdl: mba6: Add missing vdd-supply for on-board USB hub
- From: Shawn Guo <shawnguo2@xxxxxxxx>
- [PATCH v2 3/4] arm64: dts: qcom: sc8180x: Drop flags for mdss irqs
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 4/4] arm64: dts: qcom: sc8180x: add dp_p1 register blocks to DP nodes
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 0/4] arm64: dts: fix several display-related schema warnings
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 2/4] arm64: dts: qcom: sc8180x: drop legacy property #stream-id-cells
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 1/4] dt-bindings: display/msm: sm8150-mdss: add DP node
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v6 RESEND 0/4] arm64: qcom: add AIM300 AIoT board support
- From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
- Re: [PATCH v6 RESEND 4/4] arm64: dts: qcom: aim300: add AIM300 AIoT
- From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
- [PATCH v7 3/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v7 4/4] pinctrl: Implementation of the generic scmi-pinctrl driver
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v7 2/4] dt-bindings: firmware: arm,scmi: support pinctrl protocol
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v7 1/4] firmware: arm_scmi: introduce helper get_max_msg_size
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v7 0/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- Re: [PATCH v9 2/3] pwm: sifive: change the PWM algorithm
- From: Nylon Chen <nylon.chen@xxxxxxxxxx>
- Re: [PATCH v9 3/3] pwm: sifive: Fix the error in the idempotent test within the pwm_apply_state_debug function
- From: Nylon Chen <nylon.chen@xxxxxxxxxx>
- Re: [PATCH v7 2/2] dmaengine: Loongson1: Add Loongson-1 APB DMA driver
- From: Keguang Zhang <keguang.zhang@xxxxxxxxx>
- Re: [PATCH v9 00/10] media: Add driver for the Raspberry Pi <5 CSI-2 receiver
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v9 10/10] [DNI] arm64: dts: broadcom: Add overlay for Raspberry Pi 4B IMX219 camera
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v9 09/10] ARM: dts: bcm2711-rpi-4-b: Add CAM1 regulator
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v9 08/10] ARM: dts: bcm2711-rpi-cm4-io: Add RTC on I2C0
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v9 07/10] ARM: dts: bcm2711-rpi: Add pinctrl-based multiplexing for I2C0
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v9 06/10] ARM: dts: bcm2835: Add Unicam CSI nodes
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v9 04/10] media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v9 05/10] ARM: dts: bcm2835-rpi: Move duplicate firmware-clocks to bcm2835-rpi.dtsi
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v9 03/10] dt-bindings: media: Add bindings for bcm2835-unicam
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v9 00/10] media: Add driver for the Raspberry Pi <5 CSI-2 receiver
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH v3 4/4] drm: panel: Add LG sw43408 panel driver
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 3/4] drm/mipi-dsi: add mipi_dsi_compression_mode_ext()
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 0/4] drm/panel: add support for LG SW43408 panel
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 2/4] drm/mipi-dsi: use correct return type for the DSC functions
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 1/4] dt-bindings: panel: Add LG SW43408 MIPI-DSI panel
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v3] dt-bindings: ata: ahci-da850: Convert to dtschema
- From: Damien Le Moal <dlemoal@xxxxxxxxxx>
- Re: [PATCH v2 17/18] dt-bindings: pci: rockchip,rk3399-pcie-ep: Add ep-gpios property
- From: Damien Le Moal <dlemoal@xxxxxxxxxx>
- Re: Fixing the devicetree of Rock 5 Model B (and possibly others)
- From: Saravana Kannan <saravanak@xxxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: Remove unsupported node from the Pinebook Pro dts
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: [PATCH 1/7] arm64: dts: imx8-ss-lsio: fix pwm lpcg indices
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [PATCH 2/3] arm64: dts: qcom: qdu1000-idp: enable USB nodes
- From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
- Re: [PATCH] dt-bindings: pci: altera: covert to yaml
- From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
- [PATCH 7/7] arm64: dts: imx8qm-ss-dma: fix can lpcg indices
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH 6/7] arm64: dts: imx8-ss-dma: fix can lpcg indices
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH 5/7] arm64: dts: imx8-ss-dma: fix adc lpcg indices
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH 4/7] arm64: dts: imx8-ss-dma: fix pwm lpcg indices
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH 3/7] arm64: dts: imx8-ss-dma: fix spi lpcg indices
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH 2/7] arm64: dts: imx8-ss-conn: fix usb lpcg indices
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH 1/7] arm64: dts: imx8-ss-lsio: fix pwm lpcg indices
- From: Frank Li <Frank.Li@xxxxxxx>
- [PATCH 0/7] arm64: dts: imx8: fixed lpcg indices
- From: Frank Li <Frank.Li@xxxxxxx>
- Re: [PATCH v2 0/3] Add sy7802 flash led driver
- From: André Apitzsch <git@xxxxxxxxxxx>
- Re: [PATCH 0/2] Enable internal strobe pulldown on Radxa ROCK 4 SBCs
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH 1/2] arm64: dts: rockchip: Enable gpu on Cool Pi CM5
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: Remove unsupported node from the Pinebook Pro dts
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH] arm64: dts: rockchip: drop panel port unit address in GRU Scarlet
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH 6/6] iio: adc: ad7173: Add support for AD411x devices
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH v2 0/3] Add sy7802 flash led driver
- From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
- [PATCH v2 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller
- From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
- [PATCH v2 3/3] arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash
- From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
- [PATCH v2 0/3] Add sy7802 flash led driver
- From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
- [PATCH v2 1/3] dt-bindings: leds: Add Silergy SY7802 flash LED
- From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: adc: ad7173: add support for ad411x
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH] dt-bindings: rockchip: grf: Add missing type to 'pcie-phy' node
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH net-next] dt-bindings: net: snps,dwmac: Align 'snps,priority' type definition
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v2] dt-bindings: dma: snps,dma-spear1340: Fix data{-,_}width schema
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v3 9/9] arm64: dts: qcom: sm8150-hdk: rename Type-C HS endpoints
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 8/9] arm64: dts: qcom: x1e80100: describe USB signals properly
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 7/9] arm64: dts: qcom: sc8280xp: describe USB signals properly
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 6/9] arm64: dts: qcom: sc8180x: describe USB signals properly
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 5/9] arm64: dts: qcom: sc8180x: switch USB+DP QMP PHYs to new bindings
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 4/9] arm64: dts: qcom: sm8250: add a link between DWC3 and QMP PHY
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 3/9] arm64: dts: qcom: sm8250: describe HS signals properly
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 1/9] dt-bindings: clk: qcom,dispcc-sm8x50: describe additional DP clocks
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 2/9] arm64: dts: qcom: sc8180x: correct dispcc clocks
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3 0/9] arm64: dts: qcom: fix description of the Type-C signals
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: pci: altera: covert to yaml
- From: matthew.gerlach@xxxxxxxxxxxxxxx
- Re: [PATCH 1/6] dt-bindings: adc: ad7173: add support for ad411x
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- [PATCH v7 8/8] iio: accel: adxl345: Add spi-3wire option
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCH v7 7/8] iio: accel: adxl345: Add comment to probe
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCH v7 6/8] iio: accel: adxl345: Reorder probe initialization
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCH v7 5/8] iio: accel: adxl345: Pass function pointer to core
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCH v7 4/8] dt-bindings: iio: accel: adxl345: Add spi-3wire
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCH v7 3/8] iio: accel: adxl345: Move defines to header
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCH v7 2/8] iio: accel: adxl345: Group bus configuration
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCH v7 1/8] iio: accel: adxl345: Make data_range obsolete
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCH v7 0/8] iio: accel: adxl345: Add spi-3wire feature
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- Re: [PATCH 6/6] iio: adc: ad7173: Add support for AD411x devices
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH 5/6] iio: adc: ad7173: Remove index from temp channel
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH 4/6] iio: adc: ad7173: refactor ain and vref selection
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH 3/6] iio: adc: ad7173: refactor channel configuration parsing
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH 2/6] iio: adc: ad7173: fix buffers enablement for ad7176-2
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH 1/6] dt-bindings: adc: ad7173: add support for ad411x
- From: David Lechner <dlechner@xxxxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: qcom: sc7180: Fix UFS PHY clocks
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v6 RESEND 4/4] arm64: dts: qcom: aim300: add AIM300 AIoT
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v6 RESEND 2/4] arm64: dts: qcom: qcs8550: introduce qcs8550 dtsi
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH 3/3] drm: panel: Add LG sw43408 panel driver
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v3] media: dt-bindings: ovti,ov2680: Document more properties
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [PATCH v2 0/7] arm64: dts: qcom: fix description of the Type-C signals
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 0/2] phy: qcom-qmp-ufs: Fix PHY QMP clocks for SC7180
- From: Danila Tikhonov <danila@xxxxxxxxxxx>
- [PATCH 2/2] arm64: dts: qcom: sc7180: Fix UFS PHY clocks
- From: Danila Tikhonov <danila@xxxxxxxxxxx>
- [PATCH 1/2] dt-bindings: phy: qmp-ufs: Fix PHY clocks for SC7180
- From: Danila Tikhonov <danila@xxxxxxxxxxx>
- Re: [PATCH v2 27/27] kselftest/riscv: kselftest for user mode cfi
- From: Deepak Gupta <debug@xxxxxxxxxxxx>
- Re: [PATCH] ASoC: dt-bindings: mt2701-wm8960: Convert to dtschema
- From: Kartik Agarwala <agarwala.kartik@xxxxxxxxx>
- Re: [PATCH v2 27/27] kselftest/riscv: kselftest for user mode cfi
- From: Deepak Gupta <debug@xxxxxxxxxxxx>
- Re: [PATCH v2] media: dt-bindings: ovti,ov2680: Document more properties
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v1 1/6] dt-bindings: clock: meson: a1: pll: introduce new syspll bindings
- From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
- [PATCH v2 4/4] arm64: dts: qcom: msm8976: Add WCNSS node
- From: Adam Skladowski <a39.skl@xxxxxxxxx>
- [PATCH v2 3/4] arm64: dts: qcom: msm8976: Add Adreno GPU
- From: Adam Skladowski <a39.skl@xxxxxxxxx>
- [PATCH v2 2/4] arm64: dts: qcom: msm8976: Add MDSS nodes
- From: Adam Skladowski <a39.skl@xxxxxxxxx>
- [PATCH v2 1/4] arm64: dts: qcom: msm8976: Add IOMMU nodes
- From: Adam Skladowski <a39.skl@xxxxxxxxx>
- [PATCH v2 0/4] MSM8976 MDSS/GPU/WCNSS support
- From: Adam Skladowski <a39.skl@xxxxxxxxx>
- Re: [PATCH v1 3/6] dt-bindings: clock: meson: a1: peripherals: support sys_pll_div16 input
- From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v1 6/6] clk: meson: a1: add Amlogic A1 CPU clock controller driver
- From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: iio: imu: add icm42688 inside inv_icm42600
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v6 7/7] iio: accel: adxl345: Add spi-3wire option
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v5 7/7] iio: accel: adxl345: Add spi-3wire option
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH] iio: industrialio-core: look for aliases to request device index
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v1] Revise duty cycle for SMB9 and SMB10
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 0/7] arm64: dts: qcom: fix description of the Type-C signals
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 0/3] ARM: dts: Update devicetree of Asrock X570D4U BMC
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v5 7/7] iio: accel: adxl345: Add spi-3wire option
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- Re: [PATCH v6 RESEND 0/4] arm64: qcom: add AIM300 AIoT board support
- From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
- Re: [PATCH v4 1/4] remoteproc: Add TEE support
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v4 4/4] remoteproc: stm32: Add support of an OP-TEE TA to load the firmware
- From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
- Re: [PATCH v6 7/7] iio: accel: adxl345: Add spi-3wire option
- From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
- [PATCH v2] media: dt-bindings: ovti,ov2680: Document more properties
- From: Fabio Estevam <festevam@xxxxxxxxx>
- [PATCH RFT 10/10] arm64: dts: microchip: sparx5_pcb135: drop duplicated NOR flash
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH RFT 09/10] arm64: dts: microchip: sparx5_pcb134: drop duplicated NOR flash
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 08/10] arm64: dts: microchip: sparx5_pcb135: drop LED unit addresses
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 07/10] arm64: dts: microchip: sparx5_pcb134: drop LED unit addresses
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 06/10] arm64: dts: microchip: sparx5_pcb135: align I2C mux node name with bindings
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 05/10] arm64: dts: microchip: sparx5_pcb134: align I2C mux node name with bindings
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 04/10] arm64: dts: microchip: sparx5_pcb135: add missing I2C mux unit addresses
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 03/10] arm64: dts: microchip: sparx5_pcb134: add missing I2C mux unit addresses
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 02/10] arm64: dts: microchip: sparx5: correct serdes unit address
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH RFT 01/10] arm64: dts: microchip: sparx5: fix mdio reg
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3] dt-bindings: mfd: twl: Convert trivial subdevices to json-schema
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] ASoC: dt-bindings: mt2701-wm8960: Convert to dtschema
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: remoteproc: qcom,msm8996-mss-pil: allow glink-edge on msm8996
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH 6/6] iio: adc: ad7173: Add support for AD411x devices
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- [PATCH 5/6] iio: adc: ad7173: Remove index from temp channel
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- [PATCH 3/6] iio: adc: ad7173: refactor channel configuration parsing
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- [PATCH 4/6] iio: adc: ad7173: refactor ain and vref selection
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- [PATCH 1/6] dt-bindings: adc: ad7173: add support for ad411x
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- [PATCH 2/6] iio: adc: ad7173: fix buffers enablement for ad7176-2
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- [PATCH 0/6] Add support for AD411x
- From: Dumitru Ceclan via B4 Relay <devnull+dumitru.ceclan.analog.com@xxxxxxxxxx>
- Re: [PATCH] media: dt-bindings: ovti,ov2680: Document clock/data-lanes
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [PATCH v3 6/6] riscv: dts: starfive: add Milkv Mars board device tree
- From: Jisheng Zhang <jszhang@xxxxxxxxxx>
- Re: [PATCH v1 5/6] dt-bindings: clock: meson: add A1 CPU clock controller bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 6/6] arm64: dts: marvell: cn9130-crb: drop unneeded "status"
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH 5/6] arm64: dts: marvell: cn9130-crb: drop wrong unit-addresses
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH 4/6] arm64: dts: marvell: cn9130-db: drop wrong unit-addresses
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH 3/6] arm64: dts: marvell: cn9131-db: drop unneeded flash address/size-cells
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH 2/6] arm64: dts: marvell: cn9130-db: drop unneeded flash address/size-cells
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH 1/6] arm64: dts: marvell: ap80x: fix IOMMU unit address
- From: Andrew Lunn <andrew@xxxxxxx>
- Re: [PATCH v1 3/6] dt-bindings: clock: meson: a1: peripherals: support sys_pll_div16 input
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v5 4/5] clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v1 1/6] dt-bindings: clock: meson: a1: pll: introduce new syspll bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH 5/5] arm64: dts: sharkl3: add missing unit addresses
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 4/5] arm64: dts: whale2: add missing ap-apb unit address
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 3/5] arm64: dts: sc9860: move GIC to soc node
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 2/5] arm64: dts: sc9860: move GPIO keys to board
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 1/5] arm64: dts: sc9860: add missing aon-prediv unit address
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 6/6] arm64: dts: marvell: cn9130-crb: drop unneeded "status"
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 5/6] arm64: dts: marvell: cn9130-crb: drop wrong unit-addresses
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 4/6] arm64: dts: marvell: cn9130-db: drop wrong unit-addresses
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 3/6] arm64: dts: marvell: cn9131-db: drop unneeded flash address/size-cells
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 2/6] arm64: dts: marvell: cn9130-db: drop unneeded flash address/size-cells
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 1/6] arm64: dts: marvell: ap80x: fix IOMMU unit address
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 4/4] arm64: dts: n5x: socdk: drop unneeded flash address/size-cells
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 3/4] arm64: dts: agilex: socdk: drop unneeded flash address/size-cells
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 2/4] arm64: dts: stratix10: socdk_nand: drop unneeded flash address/size-cells
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 1/4] arm64: dts: stratix10: socdk: drop unneeded flash address/size-cells
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 4/4] arm64: dts: uniphier: ld20-global: drop audio codec port unit address
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 3/4] arm64: dts: uniphier: ld20-global: use generic node name for audio-codec
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 2/4] arm64: dts: uniphier: ld11-global: drop audio codec port unit address
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 1/4] arm64: dts: uniphier: ld11-global: use generic node name for audio-codec
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH] arm64: dts: rockchip: drop panel port unit address in GRU Scarlet
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 3/3] arm64: dts: realtek: rtc16xx: add missing unit address to soc node
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 2/3] arm64: dts: realtek: rtd139x: add missing unit address to soc node
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 1/3] arm64: dts: realtek: rtd129x: add missing unit address to soc node
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH] arm64: tegra: correct Tegra132 I2C alias
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v11 4/4] ARM: dts: wpcm450: Switch clocks to clock controller
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
- [PATCH v11 3/4] clk: wpcm450: Add Nuvoton WPCM450 clock/reset controller driver
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
- [PATCH v11 2/4] ARM: dts: wpcm450: Remove clock-output-names from reference clock node
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
- [PATCH v11 1/4] dt-bindings: clock: Add Nuvoton WPCM450 clock/reset controller
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
- [PATCH v11 0/4] Nuvoton WPCM450 clock and reset driver
- From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
- Re: [PATCH 07/10] dt-bindings: iio: dac: add bindings doc for AD9739A
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 06/10] dt-bindings: iio: dac: add bindings doc for AXI DAC driver
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v6 3/4] dt-bindings: watchdog: aspeed-wdt: Add aspeed,scu
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v7 09/15] media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH v3 6/6] riscv: dts: starfive: add Milkv Mars board device tree
- From: Heinrich Schuchardt <heinrich.schuchardt@xxxxxxxxxxxxx>
- Re: [PATCH v7 2/2] dmaengine: Loongson1: Add Loongson-1 APB DMA driver
- From: Huacai Chen <chenhuacai@xxxxxxxxxx>
- [PATCH v6 4/4] clk: imx: add i.MX95 BLK CTL clk driver
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v6 3/4] dt-bindings: clock: support i.MX95 Display Master CSR module
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v6 2/4] dt-bindings: clock: support i.MX95 BLK CTL module
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v6 1/4] dt-bindings: clock: add i.MX95 clock header
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v6 0/4] Add support i.MX95 BLK CTL module clock features
- From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
- [PATCH v2 2/2] ASoC: dt-bindings: fsl-asoc-card: convert to YAML
- From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
- [PATCH v2 1/2] ARM: dts: imx6sx-nitrogen6sx: drop incorrect cpu-dai property
- From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
- [PATCH v2 0/2] ASoC: dt-bindings: convert fsl-asoc-card.txt to YAML
- From: Shengjiu Wang <shengjiu.wang@xxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: arm: qcom: Document the Samsung Galaxy Z Fold5
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v5 1/2] dt-bindings: backlight: Add Texas Instruments LM3509
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v2 2/2] arm64: dts: qcom: sm8150: Add video clock controller node
- From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: clock: qcom: Update SM8150 videocc bindings
- From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
- [PATCH v2 0/2] Add DT support for video clock controller on SM8150
- From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
- Re: [PATCH v7 2/2] dmaengine: Loongson1: Add Loongson-1 APB DMA driver
- From: Keguang Zhang <keguang.zhang@xxxxxxxxx>
- [PATCH v3] dt-bindings: PCI: ti,j721e-pci-host: Add device-id for TI's J784S4 SoC
- From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
- Re: [PATCH 2/2] dt-bindings: iio: imu: add icm42688 inside inv_icm42600
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: usb: qcom,pmic-typec: update example to follow connector schema
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: PCI: rockchip,rk3399-pcie: add missing maxItems to ep-gpios
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v3 3/5] dt-bindings: serial: amlogic,meson-uart: Add compatible string for A4
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 2/3] drm/mipi-dsi: add mipi_dsi_compression_mode_raw()
- From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
- Re: [PATCH 3/3] drm: panel: Add LG sw43408 panel driver
- From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
- [PATCH v3 4/5] arm64: dts: add support for A4 based Amlogic BA400
- From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
- [PATCH v3 2/5] dt-bindings: arm: amlogic: add A5 support
- From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
- [PATCH v3 5/5] arm64: dts: add support for A5 based Amlogic AV400
- From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
- [PATCH v3 1/5] dt-bindings: arm: amlogic: add A4 support
- From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
- [PATCH v3 0/5] Baisc devicetree support for Amlogic A4 and A5
- From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
- [PATCH v3 3/5] dt-bindings: serial: amlogic,meson-uart: Add compatible string for A4
- From: Xianwei Zhao via B4 Relay <devnull+xianwei.zhao.amlogic.com@xxxxxxxxxx>
- [PATCH] dt-bindings: PCI: rockchip,rk3399-pcie: add missing maxItems to ep-gpios
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 17/18] dt-bindings: pci: rockchip,rk3399-pcie-ep: Add ep-gpios property
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [RFC PATCH 1/2] spi: dt-bindings: add Siflower Quad SPI controller
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v5 3/4] dt-bindings: clock: add i.MX95 clock header
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v2 27/27] kselftest/riscv: kselftest for user mode cfi
- From: Muhammad Usama Anjum <usama.anjum@xxxxxxxxxxxxx>
- [PATCH v6 RESEND 4/4] arm64: dts: qcom: aim300: add AIM300 AIoT
- From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
- [PATCH v6 RESEND 3/4] arm64: dts: qcom: add base AIM300 dtsi
- From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
- [PATCH v6 RESEND 2/4] arm64: dts: qcom: qcs8550: introduce qcs8550 dtsi
- From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
- [PATCH v6 RESEND 1/4] dt-bindings: arm: qcom: Document QCS8550 SoC and the AIM300 AIoT board
- From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
- [PATCH v6 RESEND 0/4] arm64: qcom: add AIM300 AIoT board support
- From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
- Re: [PATCH v7 2/2] dmaengine: Loongson1: Add Loongson-1 APB DMA driver
- From: Huacai Chen <chenhuacai@xxxxxxxxxx>
- [PATCH v1] Revise duty cycle for SMB9 and SMB10
- From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
- [PATCH v8 0/3] Add support for vibrator in multiple PMICs
- From: Fenglin Wu via B4 Relay <devnull+quic_fenglinw.quicinc.com@xxxxxxxxxx>
- [PATCH v8 1/3] input: pm8xxx-vibrator: refactor to support new SPMI vibrator
- From: Fenglin Wu via B4 Relay <devnull+quic_fenglinw.quicinc.com@xxxxxxxxxx>
- [PATCH v8 3/3] input: pm8xxx-vibrator: add new SPMI vibrator support
- From: Fenglin Wu via B4 Relay <devnull+quic_fenglinw.quicinc.com@xxxxxxxxxx>
- [PATCH v8 2/3] dt-bindings: input: qcom,pm8xxx-vib: add new SPMI vibrator module
- From: Fenglin Wu via B4 Relay <devnull+quic_fenglinw.quicinc.com@xxxxxxxxxx>
- [PATCH v2 8/8] LoongArch: dts: Add clock support to Loongson-2K2000
- From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
- [PATCH v2 7/8] LoongArch: dts: Add clock support to Loongson-2K0500
- From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
- [PATCH v2 6/8] clk: clk-loongson2: Add Loongson-2K2000 clock support
- From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
- [PATCH v2 5/8] dt-bindings: clock: loongson2: add Loongson-2K2000 compatible
- From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
- [PATCH v2 4/8] clk: clk-loongson2: Add Loongson-2K0500 clock support
- From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
- [PATCH v2 1/8] dt-bindings: clock: add Loongson-2K expand clock index
- From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
- [PATCH v2 3/8] dt-bindings: clock: loongson2: add Loongson-2K0500 compatible
- From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
- [PATCH v2 2/8] clk: clk-loongson2: Refactor driver for adding new platforms
- From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
- [PATCH v2 0/8] Add Loongson-2k0500 and Loongson-2k2000 clock support
- From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
- [PATCH v3] dt-bindings: mfd: twl: Convert trivial subdevices to json-schema
- From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
- Re: [PATCH] iio: industrialio-core: look for aliases to request device index
- From: Dominique Martinet <dominique.martinet@xxxxxxxxxxxxxxxxx>
- [PATCH] arm64: dts: rockchip: remove startup-delay-us from vcc3v3_pcie2x1l0 on rock-5b
- From: Jianfeng Liu <liujianfeng1994@xxxxxxxxx>
- [PATCH V5] PCI: Add support for preserving boot configuration
- From: Vidya Sagar <vidyas@xxxxxxxxxx>
- [PATCH V3] schemas: pci: Extend the meaning of 'linux,pci-probe-only'
- From: Vidya Sagar <vidyas@xxxxxxxxxx>
- RE: [PATCH v5 3/4] dt-bindings: clock: add i.MX95 clock header
- From: Peng Fan <peng.fan@xxxxxxx>
- RE: 回复: [PATCH v2 1/2] ASoC: dt-bindings: Add bindings for Cadence I2S-MC controller
- From: Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>
- Re: [PATCH v5 1/2] dt-bindings: hwmon: Add NCT7363Y documentation
- From: Ban Feng <baneric926@xxxxxxxxx>
- Re: [PATCH] ASoC: dt-bindings: mt2701-wm8960: Convert to dtschema
- From: Kartik Agarwala <agarwala.kartik@xxxxxxxxx>
- [PATCH] ASoC: dt-bindings: mt2701-wm8960: Convert to dtschema
- From: Kartik Agarwala <agarwala.kartik@xxxxxxxxx>
- Re: [PATCH v6 0/2] ASoC: nau8325: Modify driver code and dtschema.
- From: WTLI <wtli@xxxxxxxxxxx>
- Re: [RFC PATCH 1/2] spi: dt-bindings: add Siflower Quad SPI controller
- From: Qingfang Deng <dqfext@xxxxxxxxx>
- Re: [PATCH v7 2/2] dmaengine: Loongson1: Add Loongson-1 APB DMA driver
- From: Keguang Zhang <keguang.zhang@xxxxxxxxx>
- [PATCH v3 6/7] PCI: dwc: rcar-gen4: Add support for r8a779g0
- From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
- [PATCH v3 4/7] PCI: dwc: rcar-gen4: Add rcar_gen4_pcie_platdata
- From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
- [PATCH v3 7/7] misc: pci_endpoint_test: Document a policy about adding pci_device_id
- From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
- [PATCH v3 5/7] PCI: dwc: rcar-gen4: Add .ltssm_enable() for other SoC support
- From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
- [PATCH v3 2/7] dt-bindings: PCI: rcar-gen4-pci-ep: Add R-Car V4H compatible
- From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
- [PATCH v3 3/7] PCI: dwc: Add PCIE_PORT_{FORCE,LANE_SKEW} macros
- From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
- [PATCH v3 0/7] PCI: dwc: rcar-gen4: Add R-Car V4H support
- From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
- [PATCH v3 1/7] dt-bindings: PCI: rcar-gen4-pci-host: Add R-Car V4H compatible
- From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
- Re: [PATCH v4 1/2] arm64: dts: qcom: sm8650: add GPU nodes
- From: Jun Nie <jun.nie@xxxxxxxxxx>
- Re: [PATCH v4 2/2] arm64: dts: qcom: sm8650-qrd: enable GPU
- From: Jun Nie <jun.nie@xxxxxxxxxx>
- RE: [v1 0/3] Add i.MX8Q HSIO PHY driver support
- From: Hongxing Zhu <hongxing.zhu@xxxxxxx>
- RE: [PATCH v1 2/3] dt-bindings: phy: phy-imx8-pcie: Add binding for i.MX8Q HSIO SerDes PHY
- From: Hongxing Zhu <hongxing.zhu@xxxxxxx>
- RE: [v1 0/3] Add i.MX8Q HSIO PHY driver support
- From: Hongxing Zhu <hongxing.zhu@xxxxxxx>
- RE: [PATCH v5 0/4] Add support i.MX95 BLK CTL module clock features
- From: Peng Fan <peng.fan@xxxxxxx>
- Re: [PATCH v4 1/4] arm64: dts: imx8: add cm40 subsystem dtsi
- From: Peng Fan <peng.fan@xxxxxxx>
- Re: [PATCH v2 17/18] dt-bindings: pci: rockchip,rk3399-pcie-ep: Add ep-gpios property
- From: Damien Le Moal <dlemoal@xxxxxxxxxx>
- [PATCH] arm64: dts: rockchip: Remove unsupported node from the Pinebook Pro dts
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: [PATCH v1 6/6] clk: meson: a1: add Amlogic A1 CPU clock controller driver
- From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
- [PATCH 3/3] arm64: dts: msm8996: add fastrpc nodes
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 0/3] arm64: dts: qcom: msm8996: enable fastrpc and glink-edge
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 2/3] arm64: dts: qcom: msm8996: add glink-edge nodes
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH 1/3] dt-bindings: remoteproc: qcom,msm8996-mss-pil: allow glink-edge on msm8996
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 12/12] drm/imx: move imx_drm_connector_destroy to imx-tve
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 09/12] drm/imx: add internal bridge handling display-timings DT node
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 11/12] drm/imx: parallel-display: switch to imx_legacy_bridge / drm_bridge_connector
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 10/12] drm/imx: ldb: switch to imx_legacy_bridge / drm_bridge_connector
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 07/12] drm/imx: ldb: switch to drm_panel_bridge
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 06/12] drm/imx: ldb: drop custom DDC bus support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 08/12] drm/imx: parallel-display: switch to drm_panel_bridge
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 04/12] drm/imx: parallel-display: drop edid override support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 05/12] drm/imx: ldb: drop custom EDID support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 02/12] dt-bindings: display: imx/ldb: drop ddc-i2c-bus property
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 01/12] dt-bindings: display: fsl-imx-drm: drop edid property support
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 03/12] drm/imx: cleanup the imx-drm header
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 00/12] drm/imx/ipuv3: switch LDB and parallel-display driver to use drm_bridge_connector
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [PATCH v5 1/4] dt-bindings: clock: support i.MX95 BLK CTL module
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v5 0/4] Add support i.MX95 BLK CTL module clock features
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v5 4/4] clk: imx: add i.MX95 BLK CTL clk driver
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v4] dt-bindings: serial: actions,owl-uart: convert to dtschema
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [EXTERNAL] Re: [PATCH v7 4/4] ASoc: dt-bindings: PCM6240: Add initial DT binding
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 1/3] phy: rockchip: emmc: Enable pulldown for strobe line
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: [PATCH 1/2] arm64: dts: rockchip: Add enable-strobe-pulldown to emmc phy on ROCK Pi 4
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: [PATCH 2/2] arm64: dts: rockchip: Add enable-strobe-pulldown to emmc phy on ROCK 4C+
- From: Dragan Simic <dsimic@xxxxxxxxxxx>
- Re: [RFC][PATCH 1/2] clk: meson: T7: add support for Amlogic T7 SoC PLL clock driver
- From: Lucas Tanure <tanure@xxxxxxxxx>
- Re: [PATCH v2 2/3] dt-bindings: power: Add mediatek larb definition
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v6 0/4] fpga: xilinx-selectmap: add new driver
- From: Xu Yilun <yilun.xu@xxxxxxxxxxxxxxx>
- Re: [PATCH v6 3/4] fpga: xilinx-selectmap: add new driver
- From: Xu Yilun <yilun.xu@xxxxxxxxxxxxxxx>
- Re: [PATCH] iio: industrialio-core: look for aliases to request device index
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- RE: [PATCH v6 3/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support
- From: Peng Fan <peng.fan@xxxxxxx>
- RE: [PATCH v6 3/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support
- From: Peng Fan <peng.fan@xxxxxxx>
- [PATCH v4] dt-bindings: serial: actions,owl-uart: convert to dtschema
- From: Kanak Shilledar <kanakshilledar@xxxxxxxxx>
- RE: [EXTERNAL] Re: [PATCH v7 4/4] ASoc: dt-bindings: PCM6240: Add initial DT binding
- From: "Ding, Shenghao" <shenghao-ding@xxxxxx>
- RE: [PATCH v6 3/4] firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support
- From: Peng Fan <peng.fan@xxxxxxx>
- RE: [PATCH v5 4/4] clk: imx: add i.MX95 BLK CTL clk driver
- From: Peng Fan <peng.fan@xxxxxxx>
- RE: [PATCH v5 0/4] Add support i.MX95 BLK CTL module clock features
- From: Peng Fan <peng.fan@xxxxxxx>
- RE: [PATCH v5 1/4] dt-bindings: clock: support i.MX95 BLK CTL module
- From: Peng Fan <peng.fan@xxxxxxx>
- [PATCH 2/5] mfd: add driver for Marvell 88PM886 PMIC
- From: Karel Balej <balejk@xxxxxxxxx>
- [PATCH 5/5] MAINTAINERS: add myself for Marvell 88PM886 PMIC
- From: Karel Balej <balejk@xxxxxxxxx>
- [PATCH 3/5] regulator: add regulators driver for Marvell 88PM886 PMIC
- From: Karel Balej <balejk@xxxxxxxxx>
- [PATCH 0/5] initial support for Marvell 88PM886 PMIC
- From: Karel Balej <balejk@xxxxxxxxx>
- [PATCH 4/5] input: add onkey driver for Marvell 88PM886 PMIC
- From: Karel Balej <balejk@xxxxxxxxx>
- [PATCH 1/5] dt-bindings: mfd: add entry for Marvell 88PM886 PMIC
- From: Karel Balej <balejk@xxxxxxxxx>
- [PATCH v3 2/2] arm64: dts: qcom: sm8550: Add support for Samsung Galaxy Z Fold5
- From: Alexandru Marc Serdeliuc via B4 Relay <devnull+serdeliuk.yahoo.com@xxxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: arm: qcom: Document the Samsung Galaxy Z Fold5
- From: Alexandru Marc Serdeliuc via B4 Relay <devnull+serdeliuk.yahoo.com@xxxxxxxxxx>
- [PATCH v3 0/2] Samsung Galaxy Z Fold5 initial support
- From: Alexandru Marc Serdeliuc via B4 Relay <devnull+serdeliuk.yahoo.com@xxxxxxxxxx>
- Re: [PATCH 2/5] spi: cadence: Add Marvell IP modification changes
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 1/5] spi: cadence: Add new bindings documentation for Cadence XSPI
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH] arm64: dts: sprd: minor whitespace cleanup
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 1/2] arm64: dts: ti: k3-am62p5-sk: minor whitespace cleanup
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 0/2] Set PHY address of MT7531 switch to 0x1f on MediaTek arm64 boards
- From: arinc.unal@xxxxxxxxxx
- Re: [PATCH v1 2/2] dt-bindings: clock: rockchip: Add support for clk input / output switch
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH v7 4/4] ASoc: dt-bindings: PCM6240: Add initial DT binding
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- Re: [PATCH 2/5] spi: cadence: Add Marvell IP modification changes
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH 4/5] driver: spi: cadence: Add ACPI support
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v2] dt-bindings: usb: qcom,pmic-typec: update example to follow connector schema
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH v2 7/7] arm64: dts: qcom: sm8150-hdk: rename Type-C HS endpoints
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 6/7] arm64: dts: qcom: x1e80100: describe USB signals properly
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 4/7] arm64: dts: qcom: sc8180x: describe USB signals properly
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 5/7] arm64: dts: qcom: sc8280xp: describe USB signals properly
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- [PATCH v2 3/7] arm64: dts: qcom: sc8180x: switch USB+DP QMP PHYs to new bindings
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
[Index of Archives]
[Device Tree Spec]
[Linux USB Devel]
[Video for Linux]
[Scanner Discussion]
[Linux SCSI]
[Samba]
[Yosemite News]