On Sat, Jul 06, 2024 at 12:34:07PM GMT, David Heidelberg wrote: > Bootloader will provide the information anyway to the kernel. How about we describe an actual problem here? Perhaps this is the problem you're solving?: """ DeviceTree validation requires a unit address on the memory node, adjust the base to match [Ref] and use this as unit address. The bootloader will update the information with the actual values during boot. """ I'd also prefer s/apq8960/msm8960/ in $subject, is there a reason why you did choose apq8960? Regards, Bjorn > > Ref: https://github.com/msm8916-mainline/lk2nd/blob/main/target/msm8960/rules.mk > > Signed-off-by: David Heidelberg <david@xxxxxxx> > --- > arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git ./arch/arm/boot/dts/qcom/qcom-msm8960.dtsi ./arch/arm/boot/dts/qcom/qcom-msm8960.dtsi > index a9c6d2dbb460..ebc43c5c6e5f 100644 > --- ./arch/arm/boot/dts/qcom/qcom-msm8960.dtsi > +++ ./arch/arm/boot/dts/qcom/qcom-msm8960.dtsi > @@ -47,9 +47,9 @@ L2: l2-cache { > }; > }; > > - memory { > + memory@80000000 { > device_type = "memory"; > - reg = <0x0 0x0>; > + reg = <0x80000000 0>; > }; > > cpu-pmu { > -- > 2.45.2 >
