Marek Behún <kabel@xxxxxxxxxx> writes:
> Now that we have the MCU device-tree node, which acts as a GPIO
> controller, add GPIO key node for the front button.
>
> Signed-off-by: Marek Behún <kabel@xxxxxxxxxx>
Applied on mvebu/dt
Thanks,
Gregory
> ---
> .../boot/dts/marvell/armada-385-turris-omnia.dts | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
> index 59079d63fe27..43202890c959 100644
> --- a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
> +++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
> @@ -112,6 +112,19 @@ sfp: sfp {
> status = "disabled";
> };
>
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + front-button {
> + label = "Front Button";
> + linux,code = <KEY_VENDOR>;
> + linux,can-disable;
> + gpios = <&mcu 0 12 GPIO_ACTIVE_HIGH>;
> + /* debouncing is done by the microcontroller */
> + debounce-interval = <0>;
> + };
> + };
> +
> sound {
> compatible = "simple-audio-card";
> simple-audio-card,name = "SPDIF";
> --
> 2.44.2
