Theobroma Systems Mule is an MCU that emulates a set of I2C devices, among which devices that are reachable through an I2C-mux. The devices on the mux can be selected by writing the appropriate device number to an I2C config register. Signed-off-by: Farouk Bouabid <farouk.bouabid@xxxxxxxxx> --- .../devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml | 69 ++++++++++++++++++++++ 1 file changed, 69 insertions(+) diff --git a/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml b/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml new file mode 100644 index 000000000000..28139b676661 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/tsd,mule-i2c-mux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Theobroma Systems Mule I2C multiplexer + +maintainers: + - Farouk Bouabid <farouk.bouabid@xxxxxxxxx> + - Quentin Schulz <quentin.schulz@xxxxxxxxx> + +description: | + Theobroma Systems Mule is an MCU that emulates a set of I2C devices, among + which devices that are reachable through an I2C-mux. The devices on the mux + can be selected by writing the appropriate device number to an I2C config + register. + + + +--------------------------------------------------+ + | Mule | + 0x18| +---------------+ | + -------->|Config register|----+ | + | +---------------+ | | + | V_ | + | | \ +--------+ | + | | \-------->| dev #0 | | + | | | +--------+ | + 0x6f| | M |-------->| dev #1 | | + ---------------------------->| U | +--------+ | + | | X |-------->| dev #2 | | + | | | +--------+ | + | | /-------->| dev #3 | | + | |__/ +--------+ | + +--------------------------------------------------+ + + +allOf: + - $ref: /schemas/i2c/i2c-mux.yaml# + +properties: + compatible: + const: tsd,mule-i2c-mux + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + i2c-mux { + compatible = "tsd,mule-i2c-mux"; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@6f { + compatible = "isil,isl1208"; + reg = <0x6f>; + }; + }; + }; +... + -- 2.34.1
